Re: linux-next: Tree for Apr 24 [ PM: Device 1-1.2 failed to resumeasync: error -32 ]
From: Sedat Dilek
Date: Wed Apr 24 2013 - 16:41:04 EST
On Wed, Apr 24, 2013 at 10:32 PM, Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> wrote:
> On Wed, 24 Apr 2013, Sedat Dilek wrote:
>
>> > [ CC linux-pm and linux-usb (ehci) folks ]
>> >
>> > This happens with my external USB mouse after suspend/resume.
>> >
>> > Excerpt (full dmesg and kernel-config attached):
>> >
>> > $ dmesg | egrep -i 'usb|async' | grep 1-1.2
>> > [ 1.258602] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
>> > [ 1.368649] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c00e
>> > [ 1.368661] usb 1-1.2: New USB device strings: Mfr=1, Product=2,
>> > SerialNumber=0
>> > [ 1.368668] usb 1-1.2: Product: USB-PS/2 Optical Mouse
>> > [ 1.368672] usb 1-1.2: Manufacturer: Logitech
>> > [ 1.957999] input: Logitech USB-PS/2 Optical Mouse as
>> > /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4
>> > [ 62.353997] usb 1-1.2: reset low-speed USB device number 3 using ehci-pci
>> > [ 62.636893] PM: Device 1-1.2 failed to resume async: error -32
>> > [ 64.243543] usb 1-1.2: USB disconnect, device number 3
>> > [ 64.380328] usb 1-1.2: new low-speed USB device number 5 using ehci-pci
>> > [ 64.477612] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c00e
>> > [ 64.477618] usb 1-1.2: New USB device strings: Mfr=1, Product=2,
>> > SerialNumber=0
>> > [ 64.477621] usb 1-1.2: Product: USB-PS/2 Optical Mouse
>> > [ 64.477623] usb 1-1.2: Manufacturer: Logitech
>> > [ 64.481934] input: Logitech USB-PS/2 Optical Mouse as
>> > /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input11
>> >
>
> Did this work differently under earlier kernels?
>
Unfortunately, s/r did not work for several Linux-Next releases as
there is missing tglx's patch pendinging in tip.git/timers/core.
The last days I also use the touchpad, so the issue is new to me,
which says not that much :-).
[1] http://git.kernel.org/cgit/linux/kernel/git/tip/tip.git/commit/?h=timers/core&id=77c675ba18836802f6b73d2d773481d06ebc0f04
>> Thos 3 lines IIRC are important (one line missing above):
>>
>> [ 62.353997] usb 1-1.2: reset low-speed USB device number 3 using ehci-pci
>> [ 62.636877] dpm_run_callback(): usb_dev_resume+0x0/0x20 returns -32
>> [ 62.636893] PM: Device 1-1.2 failed to resume async: error -32
>>
>> - Sedat -
>>
>> > Any help/hints/infos welcome :-)!
>
> This indicates that the optical mouse didn't survive the suspend/resume
> sequence and had to be reenumerated. Without more information, there's
> no way to tell specifically what went wrong during the initial reset at
> timestamp 62.353997.
>
> If you want to pursue this farther, you could enable CONFIG_USB_DEBUG.
> You could also collect a usbmon trace for bus 1 showing what happens
> during the suspend and resume.
>
Hmm, I can try to enable CONFIG_USB_DEBUG and build a new kernel.
Can you give me more hints how to do a usbmon-trace?
> On the other hand, what difference does it really make if a mouse has
> to be reenumerated?
>
As a non-USB-expert it's hard to interprete such "bogus" lines in your logs.
I am curious enough to ask which is fair :-).
AFAICS in your eyes this is "harmless"?
Thanks for the fast as lightning reply!
- Sedat -
> Alan Stern
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/