Re: [PATCH 0/9] TPU PWM support
From: Simon Horman
Date: Wed Apr 24 2013 - 20:54:12 EST
On Wed, Apr 24, 2013 at 04:40:44PM +0900, Simon Horman wrote:
> On Wed, Apr 24, 2013 at 02:06:00AM +0200, Laurent Pinchart wrote:
> > Hello,
> > This patch set adds support for the TPU PWM unit found in the sh73a0 and
> > r8a7740 SoCs. It deprecates and removes the leds-renesas-tpu driver in favor
> > of a combination of leds-pwm and pwm-rmob.
> > I've tested the code on Armadillo only as I don't have access to a kota2
> > board. This is why I've added backlight support to Armadillo as part of this
> > set.
> > As an added bonus patches 7/9 and 8/9 remove function GPIOs support from the
> > sh73a0 platform. Along with the other PFC-related patches recently posted on
> > the list, mach-shmobile is now free of function GPIOs. Any volunteer to
> > migrate arch/sh ? :-)
> > The patches are based on a merge of "[PATCH 00/37] Fully migrate r8a7740 to
> > pinctrl", "[PATCH 0/4] sh73a0: Expose the PFC-controller SDHI power gate as a
> > regulator" and "[PATCH] sh-pfc: r8a7740: Add bias (pull-up/down) pinconf
> > support".
> > Laurent Pinchart (9):
> > sh-pfc: sh73a0: Add TPU pin groups and functions
> > sh-pfc: r8a7740: Add TPU pin groups and functions
> > pwm: Add Renesas Mobile TPU PWM driver
> > ARM: mach-shmobile: clock-r8a7740: add TPU PWM support
> > ARM: mach-shmobile: armadillo800eva: Add backlight support
> > ARM: mach-shmobile: kota2: Use leds-pwm + pwm-rmob
> > sh-pfc: sh73a0: Remove function GPIOs
> > ARM: shmobile: sh73a0: Remove all GPIOs
> > leds: Remove leds-renesas-tpu driver
> > arch/arm/mach-shmobile/board-armadillo800eva.c | 51 ++-
> > arch/arm/mach-shmobile/board-kota2.c | 178 +++++---
> > arch/arm/mach-shmobile/clock-r8a7740.c | 4 +-
> > arch/arm/mach-shmobile/clock-sh73a0.c | 8 +-
> > arch/arm/mach-shmobile/include/mach/sh73a0.h | 373 +--------------
> > drivers/leds/Kconfig | 12 -
> > drivers/leds/Makefile | 1 -
> > drivers/leds/leds-renesas-tpu.c | 336 --------------
> > drivers/pinctrl/sh-pfc/pfc-r8a7740.c | 50 ++
> > drivers/pinctrl/sh-pfc/pfc-sh73a0.c | 608 +++++++++----------------
> > drivers/pwm/Kconfig | 7 +
> > drivers/pwm/Makefile | 1 +
> > drivers/pwm/pwm-rmob.c | 462 +++++++++++++++++++
> > include/linux/platform_data/leds-renesas-tpu.h | 14 -
> > include/linux/platform_data/pwm-rmob.h | 18 +
> > 15 files changed, 913 insertions(+), 1210 deletions(-)
> > delete mode 100644 drivers/leds/leds-renesas-tpu.c
> > create mode 100644 drivers/pwm/pwm-rmob.c
> > delete mode 100644 include/linux/platform_data/leds-renesas-tpu.h
> > create mode 100644 include/linux/platform_data/pwm-rmob.h
> I have rebased the pinmux branch on renesas-boards3-for-v3.10 to
> supply dependencies. That tag includes the renesas-pinmux2-for-v3.10
> tag which the pinmux branch was previously based on.
> I have applied this entire series on the resulting pinmux branch.
> I plan to push this when I tag renesas-next-20130424 later today.
> If not I will tag and push renesas-next-20130425 tomorrow.
As there has been subsequent discussion and a v2 of this series posted, and
I have dropped the "[PATCH 0/4] sh73a0: Expose the PFC-controller SDHI
power gate as a regulator" series for similar reasons; I have dropped these
patches for now.
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/