Re: [tpmdd-devel] [PATCH 1/1] TPM: STMicroelectronics st33 driver SPI
From: Kent Yoder
Date: Fri Apr 26 2013 - 10:32:14 EST
On Thu, Apr 25, 2013 at 05:40:28PM +0200, Mathias LEBLANC wrote:
> Hi Kent,
>
> When the TPM does not respond, the -EBUSY error code is return after a timeout.
> The kernel SPI driver use the chip select line to address some bytes to a device, and release the SS line if does not receive response after a timeout.
> If the TPM does not respond, there are no consequences for the SPI bus and the communication with the other devices.
Thanks for the explanation. I think all that's left is the all caps
function names fixes and this will be ready to apply.
Kent
> Regards,
>
> Mathias
>
> -----Original Message-----
> From: Kent Yoder [mailto:shpedoikal@xxxxxxxxx]
> Sent: 22 April, 2013 20:31
> To: Mathias LEBLANC
> Cc: Kent Yoder; Rajiv Andrade; Marcel Selhorst; Sirrix AG; tpmdd-devel@xxxxxxxxxxxxxxxxxxxxx; Jean-Luc BLANC; linux-kernel@xxxxxxxxxxxxxxx
> Subject: Re: [tpmdd-devel] [PATCH 1/1] TPM: STMicroelectronics st33 driver SPI
>
> On Mon, Apr 22, 2013 at 06:32:05PM +0200, Mathias LEBLANC wrote:
> > Hi Kent,
> >
> > > + while (size < count &&
> > > + wait_for_stat(chip,
> > > + TPM_STS_DATA_AVAIL | TPM_STS_VALID,
> > > + chip->vendor.timeout_c,
> > > + &chip->vendor.read_queue)
> > > + == 0) {
> > > + burstcnt = get_burstcount(chip);
> > > + len = min_t(int, burstcnt, count - size);
> >
> > Kent: burstcnt as -EBUSY still needs checking.
> >
> > The get_burtcount function get the number of byte to read in the TPM
> > FIFO, The min_t function get the minus between the burstcount and the size of the command response.
> > We don't need to recheck the burstcount number.
> >
> > Regarding the -EBUSY flag, It's the error code of the SPI_WRITE_DATA and SPI_READ_DATA.
> > In the recv_data function, the status variable is checked to know if the device is BUSY.
>
> So I'm no SPI expert, but it sounds like you're saying that TPM status == SPI bus status here. You're under the tpm_mutex, so I think you're safe from other TPM writes, but what about other devices on the bus?
> Can they contend for the read/write?
>
> Kent
>
> > Regards,
> >
> > Mathias Leblanc
> >
> > -----Original Message-----
> > From: Kent Yoder [mailto:shpedoikal@xxxxxxxxx]
> > Sent: 22 April, 2013 17:26
> > To: Mathias LEBLANC
> > Cc: Kent Yoder; Rajiv Andrade; Marcel Selhorst; Sirrix AG;
> > tpmdd-devel@xxxxxxxxxxxxxxxxxxxxx; Jean-Luc BLANC;
> > linux-kernel@xxxxxxxxxxxxxxx
> > Subject: Re: [tpmdd-devel] [PATCH 1/1] TPM: STMicroelectronics st33
> > driver SPI
> >
> > On Mon, Apr 22, 2013 at 10:50:06AM +0200, Mathias Leblanc wrote:
> > > * STMicroelectronics version 1.2.0, Copyright (C) 2010
> > > * STMicroelectronics comes with ABSOLUTELY NO WARRANTY.
> > > * This is free software, and you are welcome to redistribute it
> > > * under certain conditions.
> > >
> > > This is the driver for TPM chip from ST Microelectronics.
> > >
> > > If you have a TPM security chip from STMicroelectronics working with
> > > an SPI, in menuconfig or .config choose the tpm driver on device -->
> > > tpm and activate the protocol of your choice before compiling the
> > > kernel.
> > > The driver will be accessible from within Linux.
> > >
> > > Tested on linux x86/x64 and beagleboard REV B & XM REV C
> > >
> > > Signed-off-by: Mathias Leblanc <mathias.leblanc@xxxxxx>
> > > ---
> > > drivers/char/tpm/Kconfig | 10 +
> > > drivers/char/tpm/Makefile | 1 +
> > > drivers/char/tpm/tpm_spi_stm_st33.c | 1027 +++++++++++++++++++++++++++++++++++
> > > drivers/char/tpm/tpm_spi_stm_st33.h | 86 +++
> > > 4 files changed, 1124 insertions(+), 0 deletions(-) create mode
> > > 100644 drivers/char/tpm/tpm_spi_stm_st33.c
> > > create mode 100644 drivers/char/tpm/tpm_spi_stm_st33.h
> > >
> > > diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
> > > index
> > > dbfd564..2fc1254 100644
> > > --- a/drivers/char/tpm/Kconfig
> > > +++ b/drivers/char/tpm/Kconfig
> > > @@ -91,4 +91,14 @@ config TCG_ST33_I2C
> > > To compile this driver as a module, choose M here; the module will be
> > > called tpm_stm_st33_i2c.
> > >
> > > +config TCG_ST33_SPI
> > > + tristate "STMicroelectronics ST33 SPI"
> > > + depends on SPI
> > > + depends on GPIOLIB
> > > + ---help---
> > > + If you have a TPM security chip from STMicroelectronics working with
> > > + an SPI bus say Yes and it will be accessible from within Linux.
> > > + To compile this driver as a module, choose M here; the module will be
> > > + called tpm_stm_st33_spi.
> > > +
> > > endif # TCG_TPM
> > > diff --git a/drivers/char/tpm/Makefile b/drivers/char/tpm/Makefile
> > > index a3736c9..a1db3dd 100644
> > > --- a/drivers/char/tpm/Makefile
> > > +++ b/drivers/char/tpm/Makefile
> > > @@ -18,3 +18,4 @@ obj-$(CONFIG_TCG_ATMEL) += tpm_atmel.o
> > > obj-$(CONFIG_TCG_INFINEON) += tpm_infineon.o
> > > obj-$(CONFIG_TCG_IBMVTPM) += tpm_ibmvtpm.o
> > > obj-$(CONFIG_TCG_ST33_I2C) += tpm_i2c_stm_st33.o
> > > +obj-$(CONFIG_TCG_ST33_SPI) += tpm_spi_stm_st33.o
> > > diff --git a/drivers/char/tpm/tpm_spi_stm_st33.c
> > > b/drivers/char/tpm/tpm_spi_stm_st33.c
> > > new file mode 100644
> > > index 0000000..70828dc
> > > --- /dev/null
> > > +++ b/drivers/char/tpm/tpm_spi_stm_st33.c
> > > @@ -0,0 +1,1028 @@
> > > +/*
> > > + * STMicroelectronics TPM SPI Linux driver for TPM ST33ZP24
> > > + * Copyright (C) 2009, 2010 STMicroelectronics
> > > + *
> > > + * This program is free software; you can redistribute it and/or
> > > +modify
> > > + * it under the terms of the GNU General Public License as
> > > +published by
> > > + * the Free Software Foundation; either version 2 of the License,
> > > +or
> > > + * (at your option) any later version.
> > > + *
> > > + * This program is distributed in the hope that it will be useful,
> > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > > + * GNU General Public License for more details.
> > > + *
> > > + * You should have received a copy of the GNU General Public
> > > +License along
> > > + * with this program; if not, write to the Free Software
> > > +Foundation, Inc.,
> > > + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
> > > + *
> > > + * STMicroelectronics version 1.2.0, Copyright (C) 2010
> > > + * STMicroelectronics comes with ABSOLUTELY NO WARRANTY.
> > > + * This is free software, and you are welcome to redistribute it
> > > + * under certain conditions.
> > > + *
> > > + * @Author: Christophe RICARD tpmsupport@xxxxxx
> > > + *
> > > + * @File: tpm_stm_st33_spi.c
> > > + *
> > > + * @Synopsis:
> > > + * 09/15/2010: First shot driver tpm_tis driver for lpc is
> > > + * used as model.
> > > + */
> > > +
> > > +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> > > +
> > > +#include <linux/module.h>
> > > +#include <linux/kernel.h>
> > > +#include <linux/delay.h>
> > > +#include <linux/init.h>
> > > +#include <linux/spi/spi.h>
> > > +#include <linux/wait.h>
> > > +#include <linux/string.h>
> > > +#include <linux/interrupt.h>
> > > +#include <linux/spinlock.h>
> > > +#include <linux/sysfs.h>
> > > +#include <linux/gpio.h>
> > > +#include <linux/sched.h>
> > > +#include <linux/uaccess.h>
> > > +#include <linux/io.h>
> > > +#include <linux/slab.h>
> > > +#include <linux/sched.h>
> > > +
> > > +#include "tpm.h"
> > > +
> > > +#include "tpm_spi_stm_st33.h"
> > > +
> > > +enum stm33zp24_access {
> > > + TPM_ACCESS_VALID = 0x80,
> > > + TPM_ACCESS_ACTIVE_LOCALITY = 0x20,
> > > + TPM_ACCESS_REQUEST_PENDING = 0x04,
> > > + TPM_ACCESS_REQUEST_USE = 0x02, };
> > > +
> > > +enum stm33zp24_status {
> > > + TPM_STS_VALID = 0x80,
> > > + TPM_STS_COMMAND_READY = 0x40,
> > > + TPM_STS_GO = 0x20,
> > > + TPM_STS_DATA_AVAIL = 0x10,
> > > + TPM_STS_DATA_EXPECT = 0x08,
> > > +};
> > > +
> > > +enum stm33zp24_int_flags {
> > > + TPM_GLOBAL_INT_ENABLE = 0x80,
> > > + TPM_INTF_CMD_READY_INT = 0x080,
> > > + TPM_INTF_FIFO_AVALAIBLE_INT = 0x040,
> > > + TPM_INTF_WAKE_UP_READY_INT = 0x020,
> > > + TPM_INTF_LOC4SOFTRELEASE_INT = 0x008,
> > > + TPM_INTF_LOCALITY_CHANGE_INT = 0x004,
> > > + TPM_INTF_STS_VALID_INT = 0x002,
> > > + TPM_INTF_DATA_AVAIL_INT = 0x001, };
> > > +
> > > +enum tis_defaults {
> > > + TIS_SHORT_TIMEOUT = 750, /* ms */
> > > + TIS_LONG_TIMEOUT = 2000, /* 2 sec */
> > > +};
> > > +
> > > +/*
> > > + * write8_reg
> > > + * Send byte to the TIS register according to the ST33ZP24 SPI protocol.
> > > + * @param: tpm, the chip description
> > > + * @param: tpm_register, the tpm tis register where the data should
> > > +be written
> > > + * @param: tpm_data, the tpm_data to write inside the tpm_register
> > > + * @param: tpm_size, The length of the data
> > > + * @return: should be zero if success else a negative error code.
> > > + */
> > > +static int write8_reg(struct tpm_chip *tpm, u8 tpm_register,
> > > + u8 *tpm_data, u16 tpm_size) {
> > > + u8 data;
> > > + int total_length = 0, nbr_dummy_bytes;
> > > + int value = 0;
> > > + struct spi_device *dev = (struct spi_device *)tpm->vendor.iobase;
> > > + struct st33zp24_platform_data *platform_data = dev->dev.platform_data;
> > > + u8 *data_buffer = platform_data->tpm_spi_buffer[0];
> > > + struct spi_transfer xfer = {
> > > + .tx_buf = data_buffer,
> > > + .rx_buf = platform_data->tpm_spi_buffer[1],
> > > + };
> > > + struct spi_message msg;
> > > + u8 latency = platform_data->latency + tpm_size + 1;
> > > +
> > > + /* Pre-Header */
> > > + data = TPM_WRITE_DIRECTION | tpm->vendor.locality;
> > > + memcpy(data_buffer + total_length, &data, sizeof(data));
> > > + total_length++;
> > > + data = tpm_register;
> > > + memcpy(data_buffer + total_length, &data, sizeof(data));
> > > + total_length++;
> > > +
> > > + if (tpm_size > 0 &&
> > > + (tpm_register == TPM_DATA_FIFO ||
> > > + tpm_register == TPM_HASH_DATA)) {
> > > + data = (tpm_size >> 8) & 0x00ff;
> > > + data_buffer[total_length++] = data;
> > > + data = tpm_size & 0x00ff;
> > > + data_buffer[total_length++] = data;
> > > + latency -= 2;
> > > + }
> > > +
> > > + memcpy(&data_buffer[total_length], tpm_data, tpm_size);
> > > + total_length += tpm_size;
> > > +
> > > + nbr_dummy_bytes = platform_data->latency + 1;
> > > + memset(&data_buffer[total_length], TPM_DUMMY_BYTE,
> > > + platform_data->latency + 1);
> > > +
> > > + xfer.len = total_length;
> > > + spi_message_init(&msg);
> > > + spi_message_add_tail(&xfer, &msg);
> > > + value = spi_sync(dev, &msg);
> > > +
> > > + if (value == 0) {
> > > + nbr_dummy_bytes = total_length - 1 - nbr_dummy_bytes;
> > > + for (; nbr_dummy_bytes < total_length &&
> > > + ((u8 *)xfer.rx_buf)[nbr_dummy_bytes] == 0;
> > > + nbr_dummy_bytes++)
> > > + ;
> > > +
> > > + if (((u8 *)xfer.rx_buf)[nbr_dummy_bytes] != 0)
> > > + value = ((u8 *)xfer.rx_buf)[nbr_dummy_bytes];
> > > + }
> > > +
> > > + return value;
> > > +} /* write8_reg() */
> > > +
> > > +/*
> > > + * read8_reg
> > > + * Recv byte from the TIS register according to the ST33ZP24 SPI protocol.
> > > + * @param: tpm, the chip description
> > > + * @param: tpm_register, the tpm tis register where the data should
> > > +be read
> > > + * @param: tpm_data, the TPM response
> > > + * @param: tpm_size, tpm TPM response size to read.
> > > + * @return: should be zero if success else a negative error code.
> > > + */
> > > +static u8 read8_reg(struct tpm_chip *tpm, u8 tpm_register,
> > > + u8 *tpm_data, u16 tpm_size) {
> > > + u8 data;
> > > + int total_length = 0, nbr_dummy_bytes;
> > > + int value = 0;
> > > + struct spi_device *dev = (struct spi_device *)tpm->vendor.iobase;
> > > + struct st33zp24_platform_data *platform_data = dev->dev.platform_data;
> > > + u8 *data_buffer = platform_data->tpm_spi_buffer[0];
> > > + struct spi_transfer xfer = {
> > > + .tx_buf = data_buffer,
> > > + .rx_buf = platform_data->tpm_spi_buffer[1],
> > > + };
> > > + struct spi_message msg;
> > > +
> > > + u8 latency = platform_data->latency + tpm_size + 1;
> > > +
> > > + /* Pre-Header */
> > > +
> > > + data = tpm->vendor.locality;
> > > + memcpy(data_buffer + total_length, &data, sizeof(data));
> > > + total_length++;
> > > + data = tpm_register;
> > > + memcpy(data_buffer + total_length, &data, sizeof(data));
> > > + total_length++;
> > > +
> > > + nbr_dummy_bytes = platform_data->latency + 1;
> > > + memset(&data_buffer[total_length], TPM_DUMMY_BYTE,
> > > + platform_data->latency + 1);
> > > +
> > > + xfer.len = total_length;
> > > +
> > > + /* header + status byte + size of the data + status byte */
> > > + spi_message_init(&msg);
> > > + spi_message_add_tail(&xfer, &msg);
> > > + value = spi_sync(dev, &msg);
> > > +
> > > + if (tpm_size > 0 && value == 0) {
> > > + nbr_dummy_bytes = 2;
> > > + for (; nbr_dummy_bytes < total_length &&
> > > + ((u8 *)xfer.rx_buf)[nbr_dummy_bytes] == 0;
> > > + nbr_dummy_bytes++)
> > > + ;
> > > +
> > > + if (nbr_dummy_bytes + 1 < total_length) {
> > > + value = ((u8 *)xfer.rx_buf)[nbr_dummy_bytes];
> > > +
> > > + if (tpm_size > 0)
> > > + memcpy(tpm_data, xfer.rx_buf +
> > > + nbr_dummy_bytes + 1,
> > > + tpm_size);
> > > + }
> > > + }
> > > + return value;
> > > +} /* read8_reg() */
> > > +
> > > +/*
> > > + * SPI_WRITE_DATA
> > > + * Send byte to the TIS register according to the ST33ZP24 SPI protocol.
> > > + * @param: tpm, the chip description
> > > + * @param: tpm_register, the tpm tis register where the data should
> > > +be written
> > > + * @param: tpm_data, the tpm_data to write inside the tpm_register
> > > + * @param: tpm_size, The length of the data
> > > + * @return: should be zero if success else the negative error code.
> > > + */
> > > +static u32 SPI_WRITE_DATA(struct tpm_chip *tpm, u8 tpm_register,
> > > + u8 *tpm_data, u16 tpm_size) {
> > > + u8 value = 0;
> > > + value = write8_reg(tpm, tpm_register, tpm_data, tpm_size);
> > > +
> > > + switch (value) {
> > > + case TPM_ST_SPI_OK:
> > > + return TPM_ST_SPI_OK;
> > > + case 0:
> > > + return 0;
> > > + default:
> > > + return -EBUSY;
> > > + }
> > > +} /* SPI_WRITE_DATA() */
> > > +
> > > +/*
> > > + * SPI_READ_DATA
> >
> > Still need this as lower case, and SPI_WRITE_DATA...
> >
> > > + * Recv byte from the TIS register according to the ST33ZP24 SPI protocol.
> > > + * @param: tpm, the chip description
> > > + * @param: tpm_register, the tpm tis register where the data should
> > > +be read
> > > + * @param: tpm_data, the TPM response
> > > + * @param: tpm_size, tpm TPM response size to read.
> > > + * @return: should be zero if success else the negative error code.
> > > + */
> > > +static u32 SPI_READ_DATA(struct tpm_chip *tpm, u8 tpm_register,
> > > + u8 *tpm_data, u16 tpm_size) {
> > > + u8 value = 0;
> > > +
> > > + value = read8_reg(tpm, tpm_register, tpm_data, tpm_size);
> > > +
> > > + switch (value) {
> > > + case TPM_ST_SPI_OK:
> > > + return TPM_ST_SPI_OK;
> > > + case 0:
> > > + return 0;
> > > + default:
> > > + return -EBUSY;
> > > + }
> > > +} /* SPI_READ_DATA () */
> > > +
> > > +/*
> > > + * clear_interruption
> > > + * clear the TPM interrupt register.
> > > + * @param: tpm, the chip description */ static void
> > > +clear_interruption(struct tpm_chip *tpm) {
> > > + u8 interrupt;
> > > + SPI_READ_DATA(tpm, TPM_INT_STATUS, &interrupt, 1);
> > > + /* Clear interrupts handled with TPM_EOI */
> > > + SPI_WRITE_DATA(tpm, TPM_INT_STATUS, &interrupt, 1);
> > > + SPI_READ_DATA(tpm, TPM_INT_STATUS, &interrupt, 1); } /*
> > > +clear_interruption() */
> > > +
> > > +/*
> > > + * _wait_for_interrupt_serirq_timeout
> > > + * @param: tpm, the chip description
> > > + * @param: timeout, the timeout of the interrupt
> > > + * @return: the status of the interruption.
> > > + */
> > > +static int _wait_for_interrupt_serirq_timeout(struct tpm_chip *chip,
> > > + unsigned long timeout) {
> > > + unsigned long status;
> > > + struct spi_device *client;
> > > + struct st33zp24_platform_data *pin_infos;
> > > +
> > > + client = (struct spi_device *)chip->vendor.iobase;
> > > + pin_infos = client->dev.platform_data;
> > > +
> > > + status = wait_for_completion_interruptible_timeout(
> > > + &pin_infos->irq_detection, timeout);
> > > + if (status > 0)
> > > + enable_irq(gpio_to_irq(pin_infos->io_serirq));
> > > + gpio_direction_input(pin_infos->io_serirq);
> > > +
> > > + return status;
> > > +} /* wait_for_interrupt_serirq_timeout() */
> > > +
> > > +unsigned long wait_for_serirq_timeout(struct tpm_chip *chip, bool condition,
> > > + unsigned long timeout) {
> > > + unsigned long status = 0;
> > > +
> > > + status = _wait_for_interrupt_serirq_timeout(chip, timeout);
> > > + if (!status) {
> > > + status = -EBUSY;
> > > + goto wait_end;
> > > + }
> > > + clear_interruption(chip);
> > > + if (condition)
> > > + status = 1;
> > > +
> > > +wait_end:
> > > + return status;
> > > +}
> > > +
> > > +
> > > +/*
> > > + * tpm_stm_spi_cancel, cancel is not implemented.
> > > + * @param: chip, the tpm chip description as specified in
> > > + * driver/char/tpm/tpm.h.
> > > + */
> > > +static void tpm_stm_spi_cancel(struct tpm_chip *chip) {
> > > + u8 data = TPM_STS_COMMAND_READY;
> > > +
> > > + /* this causes the current command to be aborted */
> > > + SPI_WRITE_DATA(chip, TPM_STS, &data, 1); } /*
> > > +tpm_stm_spi_cancel() */
> > > +
> > > +/*
> > > + * tpm_stm_spi_status return the TPM_STS register
> > > + * @param: chip, the tpm chip description
> > > + * @return: the TPM_STS register value.
> > > + */
> > > +static u8 tpm_stm_spi_status(struct tpm_chip *chip) {
> > > + u8 data;
> > > +
> > > + SPI_READ_DATA(chip, TPM_STS, &data, 1);
> > > + return data;
> > > +} /* tpm_stm_spi_status() */
> > > +
> > > +
> > > +
> > > +/*
> > > + * check_locality if the locality is active
> > > + * @param: chip, the tpm chip description
> > > + * @return: the active locality or -EACCESS.
> > > + */
> > > +static int check_locality(struct tpm_chip *chip) {
> > > + u8 data;
> > > + u8 status;
> > > +
> > > + status = SPI_READ_DATA(chip, TPM_ACCESS, &data, 1);
> > > + if (status && (data &
> > > + (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) ==
> > > + (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID))
> > > + return chip->vendor.locality;
> > > +
> > > + return -EACCES;
> > > +} /* check_locality() */
> > > +
> > > +/*
> > > + * request_locality request the TPM locality
> > > + * @param: chip, the chip description
> > > + * @return: the active locality or EACCESS.
> > > + */
> > > +static int request_locality(struct tpm_chip *chip) {
> > > + unsigned long stop;
> > > + long rc;
> > > + u8 data;
> > > +
> > > + /* Check locality */
> > > + if (check_locality(chip) == chip->vendor.locality)
> > > + return chip->vendor.locality;
> > > +
> > > + /* Request locality */
> > > + data = TPM_ACCESS_REQUEST_USE;
> > > + rc = SPI_WRITE_DATA(chip, TPM_ACCESS, &data, 1);
> > > + if (rc < 0)
> > > + goto end;
> > > +
> > > + /* wait for burstcount */
> > > + if (chip->vendor.irq) {
> > > + rc = wait_for_serirq_timeout(chip, (check_locality
> > > + (chip) >= 0),
> > > + chip->vendor.timeout_a);
> > > + if (rc > 0)
> > > + return chip->vendor.locality;
> > > + } else {
> > > + stop = jiffies + chip->vendor.timeout_a;
> > > + do {
> > > + if (check_locality(chip) >= 0)
> > > + return chip->vendor.locality;
> > > + msleep(TPM_TIMEOUT);
> > > + } while (time_before(jiffies, stop));
> > > + }
> > > +end:
> > > + return -EACCES;
> > > +} /* request_locality() */
> > > +
> > > +/*
> > > + * release_locality release the active locality
> > > + * @param: chip, the tpm chip description.
> > > + */
> > > +static void release_locality(struct tpm_chip *chip) {
> > > + u8 data;
> > > +
> > > + data = TPM_ACCESS_ACTIVE_LOCALITY;
> > > + SPI_WRITE_DATA(chip, TPM_ACCESS, &data, 1); } /*
> > > +release_locality()*/
> > > +
> > > +/*
> > > + * get_burstcount return the burstcount address 0x19 0x1A
> > > + * @param: chip, the chip description
> > > + * return: the burstcount.
> > > + */
> > > +static int get_burstcount(struct tpm_chip *chip) {
> > > + unsigned long stop;
> > > + u32 burstcnt, status;
> > > + u8 tpm_reg, temp;
> > > +
> > > + /* wait for burstcount */
> > > + /* which timeout value, spec has 2 answers (c & d) */
> > > + stop = jiffies + chip->vendor.timeout_d;
> > > + do {
> > > + tpm_reg = TPM_STS + 1;
> > > + status = SPI_READ_DATA(chip, tpm_reg, &temp, 1);
> > > + if (status < 0)
> > > + goto end;
> > > +
> > > + tpm_reg = tpm_reg + 1;
> > > + burstcnt = temp;
> > > + status = SPI_READ_DATA(chip, tpm_reg, &temp, 1);
> > > + if (status < 0)
> > > + goto end;
> > > +
> > > + burstcnt |= temp << 8;
> > > + if (burstcnt)
> > > + return burstcnt;
> > > + msleep(TPM_TIMEOUT);
> > > + } while (time_before(jiffies, stop));
> > > +
> > > +end:
> > > + return -EBUSY;
> > > +} /* get_burstcount() */
> > > +
> > > +/*
> > > + * wait_for_stat wait for a TPM_STS value
> > > + * @param: chip, the tpm chip description
> > > + * @param: mask, the value mask to wait
> > > + * @param: timeout, the timeout
> > > + * @param: queue, the wait queue.
> > > + * @return: the tpm status, 0 if success, -ETIME if timeout is reached.
> > > + */
> > > +static int wait_for_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout,
> > > + wait_queue_head_t *queue) {
> > > + unsigned long stop;
> > > + long rc;
> > > + u8 status;
> > > +
> > > + /* check current status */
> > > + status = tpm_stm_spi_status(chip);
> > > + if (!chip->vendor.irq && (status & mask) == mask)
> > > + return 0;
> > > +
> > > + if (chip->vendor.irq) {
> > > + rc = wait_for_serirq_timeout(chip, ((tpm_stm_spi_status
> > > + (chip) & mask) ==
> > > + mask), timeout);
> > > + if (rc > 0)
> > > + return 0;
> > > + } else {
> > > + stop = jiffies + timeout;
> > > + do {
> > > + msleep(TPM_TIMEOUT);
> > > + status = tpm_stm_spi_status(chip);
> > > + if ((status & mask) == mask)
> > > + return 0;
> > > + } while (time_before(jiffies, stop));
> > > + }
> > > + return -ETIME;
> > > +} /* wait_for_stat() */
> > > +
> > > +/*
> > > + * recv_data receive data
> > > + * @param: chip, the tpm chip description
> > > + * @param: buf, the buffer where the data are received
> > > + * @param: count, the number of data to receive
> > > + * @return: the tpm status, 0 if success, -ETIME if timeout is reached.
> > > + */
> > > +static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count) {
> > > + u32 size = 0, burstcnt, status, len;
> > > +
> > > + while (size < count &&
> > > + wait_for_stat(chip,
> > > + TPM_STS_DATA_AVAIL | TPM_STS_VALID,
> > > + chip->vendor.timeout_c,
> > > + &chip->vendor.read_queue)
> > > + == 0) {
> > > + burstcnt = get_burstcount(chip);
> > > + len = min_t(int, burstcnt, count - size);
> >
> > burstcnt as -EBUSY still needs checking.
> >
> > > + status = SPI_READ_DATA(chip, TPM_DATA_FIFO, buf + size, len);
> > > + if (status < 0)
> > > + return status;
> > > +
> > > +
> > > + size += len;
> > > + }
> > > + return size;
> > > +}
> > > +
> > > +/*
> > > + * tpm_ioserirq_handler the serirq irq handler
> > > + * @param: irq, the tpm chip description
> > > + * @param: dev_id, the description of the chip
> > > + * @return: the status of the handler.
> > > + */
> > > +static irqreturn_t tpm_ioserirq_handler(int irq, void *dev_id) {
> > > + struct tpm_chip *chip = dev_id;
> > > + struct spi_device *client;
> > > + struct st33zp24_platform_data *pin_infos;
> > > +
> > > + disable_irq_nosync(irq);
> > > +
> > > + client = (struct spi_device *)chip->vendor.iobase;
> > > + pin_infos = client->dev.platform_data;
> > > +
> > > + complete(&pin_infos->irq_detection);
> > > + return IRQ_HANDLED;
> > > +} /* tpm_ioserirq_handler() */
> > > +
> > > +/*
> > > + * tpm_stm_spi_send send TPM commands through the SPI bus.
> > > + * @param: chip, the tpm chip description
> > > + * @param: buf, the tpm command buffer
> > > + * @param: len, the tpm command size
> > > + * @return: should be zero if success else the negative error code.
> > > + */
> > > +static int tpm_stm_spi_send(struct tpm_chip *chip, unsigned char *buf,
> > > + size_t len) {
> > > + u32 ret = 0, status, burstcnt = 0, i, size = 0;
> > > + u8 data;
> > > +
> > > + if (chip == NULL)
> > > + return -EBUSY;
> > > + if (len < TPM_HEADER_SIZE)
> > > + return -EBUSY;
> > > +
> > > + ret = request_locality(chip);
> > > + if (ret < 0)
> > > + return ret;
> > > +
> > > + status = tpm_stm_spi_status(chip);
> > > + if ((status & TPM_STS_COMMAND_READY) == 0) {
> > > + tpm_stm_spi_cancel(chip);
> > > + if (wait_for_stat
> > > + (chip, TPM_STS_COMMAND_READY, chip->vendor.timeout_b,
> > > + &chip->vendor.int_queue) < 0) {
> > > + ret = -ETIME;
> > > + goto out_err;
> > > + }
> > > + }
> > > +
> > > + for (i = 0; i < len - 1;) {
> > > + burstcnt = get_burstcount(chip);
> > > + size = min_t(int, len - i - 1, burstcnt);
> >
> > Same burstcnt check here.
> >
> > > + ret = SPI_WRITE_DATA(chip, TPM_DATA_FIFO, buf, size);
> > > + if (ret < 0)
> > > + goto out_err;
> > > + i += size;
> > > + }
> > > +
> > > + status = tpm_stm_spi_status(chip);
> > > + if ((status & TPM_STS_DATA_EXPECT) == 0) {
> > > + ret = -EIO;
> > > + goto out_err;
> > > + }
> > > +
> > > + /* write last byte */
> > > + SPI_WRITE_DATA(chip, TPM_DATA_FIFO, buf + len - 1, 1);
> > > +
> > > + status = tpm_stm_spi_status(chip);
> > > + if ((status & TPM_STS_DATA_EXPECT) != 0) {
> > > + ret = -EIO;
> > > + goto out_err;
> > > + }
> > > +
> > > + /* go and do it */
> > > + data = TPM_STS_GO;
> > > + ret = SPI_WRITE_DATA(chip, TPM_STS, &data, 1);
> > > + if (ret < 0)
> > > + goto out_err;
> > > +
> > > + return len;
> > > +out_err:
> > > + tpm_stm_spi_cancel(chip);
> > > + release_locality(chip);
> > > + return ret;
> > > +}
> > > +
> > > +/*
> > > + * tpm_stm_spi_recv received TPM response through the SPI bus.
> > > + * @param: chip, the tpm chip description
> > > + * @param: buf, the tpm command buffer
> > > + * @param: len, the tpm command size
> > > +* @return: should be zero if success else the negative error code.
> > > + */
> > > +static int tpm_stm_spi_recv(struct tpm_chip *chip, unsigned char *buf,
> > > + size_t count) {
> > > + int size = 0;
> > > + int expected;
> > > +
> > > + if (chip == NULL)
> > > + return -EBUSY;
> > > + if (count < TPM_HEADER_SIZE) {
> > > + size = -EIO;
> > > + goto out;
> > > + }
> > > +
> > > + size = recv_data(chip, buf, TPM_HEADER_SIZE);
> > > +
> > > + /* read first 10 bytes, including tag, paramsize, and result */
> > > + if (size < TPM_HEADER_SIZE) {
> > > + dev_err(chip->dev, "Unable to read header\n");
> > > + goto out;
> > > + }
> > > +
> > > + expected = be32_to_cpu(*(__be32 *)(buf + 2));
> > > + if (expected > count) {
> > > + size = -EIO;
> > > + goto out;
> > > + }
> > > +
> > > + size += recv_data(chip, &buf[TPM_HEADER_SIZE],
> > > + expected - TPM_HEADER_SIZE);
> > > + if (size < expected) {
> > > + dev_err(chip->dev, "Unable to read remainder of result\n");
> > > + size = -ETIME;
> > > + goto out;
> > > + }
> > > +
> > > +out:
> > > + chip->vendor.cancel(chip);
> > > + release_locality(chip);
> > > + return size;
> > > +}
> > > +
> > > +
> > > +static const struct file_operations tpm_st33_spi_fops = {
> > > + .owner = THIS_MODULE,
> > > + .llseek = no_llseek,
> > > + .read = tpm_read,
> > > + .write = tpm_write,
> > > + .open = tpm_open,
> > > + .release = tpm_release,
> > > +};
> > > +
> > > +static DEVICE_ATTR(pubek, S_IRUGO, tpm_show_pubek, NULL); static
> > > +DEVICE_ATTR(pcrs, S_IRUGO, tpm_show_pcrs, NULL); static
> > > +DEVICE_ATTR(enabled, S_IRUGO, tpm_show_enabled, NULL); static
> > > +DEVICE_ATTR(active, S_IRUGO, tpm_show_active, NULL); static
> > > +DEVICE_ATTR(owned, S_IRUGO, tpm_show_owned, NULL); static
> > > +DEVICE_ATTR(temp_deactivated, S_IRUGO, tpm_show_temp_deactivated,
> > > +NULL); static DEVICE_ATTR(caps, S_IRUGO, tpm_show_caps_1_2, NULL);
> > > +static DEVICE_ATTR(cancel, S_IWUSR | S_IWGRP, NULL,
> > > +tpm_store_cancel);
> > > +
> > > +static struct attribute *stm_tpm_attrs[] = {
> > > + &dev_attr_pubek.attr,
> > > + &dev_attr_pcrs.attr,
> > > + &dev_attr_enabled.attr,
> > > + &dev_attr_active.attr,
> > > + &dev_attr_owned.attr,
> > > + &dev_attr_temp_deactivated.attr,
> > > + &dev_attr_caps.attr,
> > > + &dev_attr_cancel.attr, NULL,
> > > +};
> > > +
> > > +static struct attribute_group stm_tpm_attr_grp = {
> > > + .attrs = stm_tpm_attrs
> > > +};
> > > +
> > > +static struct tpm_vendor_specific st_spi_tpm = {
> > > + .send = tpm_stm_spi_send,
> > > + .recv = tpm_stm_spi_recv,
> > > + .cancel = tpm_stm_spi_cancel,
> > > + .status = tpm_stm_spi_status,
> > > + .attr_group = &stm_tpm_attr_grp,
> > > + .miscdev = {.fops = &tpm_st33_spi_fops,}, };
> > > +
> > > +static int evaluate_latency(struct tpm_chip *chip) {
> > > + int latency = 0;
> > > + struct spi_device *dev = (struct spi_device *)chip->vendor.iobase;
> > > + struct st33zp24_platform_data *platform_data = dev->dev.platform_data;
> > > + int status = 0;
> > > + u8 data;
> > > +
> > > + for (; status == 0x00 && latency < MAX_SPI_LATENCY; latency++) {
> > > + platform_data->latency = latency;
> > > + status = SPI_READ_DATA(chip, TPM_INTF_CAPABILITY, &data, 1);
> > > + }
> > > + return latency - 1;
> > > +} /* evaluate_latency() */
> > > +
> > > +static int interrupts;
> > > +module_param(interrupts, int, 0444); MODULE_PARM_DESC(interrupts,
> > > +"Enable interrupts");
> > > +
> > > +static int power_mgt = 1;
> > > +module_param(power_mgt, int, 0444); MODULE_PARM_DESC(power_mgt,
> > > +"Power Management");
> > > +
> > > +/*
> > > + * tpm_st33_spi_probe initialize the TPM device
> > > + * @param: client, the spi_device drescription (TPM SPI description).
> > > + * @param: id, the spi_device_id struct.
> > > + * @return: 0 in case of success.
> > > + * -1 in other case.
> > > + */
> > > +static int
> > > +tpm_st33_spi_probe(struct spi_device *dev) {
> > > + u32 err = 0;
> > > + u8 intmask;
> > > + struct tpm_chip *chip;
> > > + struct st33zp24_platform_data *platform_data;
> > > +
> > > + /* Check SPI platform functionnalities */
> > > + if (dev == NULL) {
> > > + pr_info("dev is NULL. exiting.\n");
> > > + err = -ENODEV;
> > > + goto end;
> > > + }
> > > +
> > > + chip = tpm_register_hardware(&dev->dev, &st_spi_tpm);
> > > + if (!chip) {
> > > + err = -ENODEV;
> > > + goto end;
> > > + }
> > > +
> > > + /* Allocation of SPI buffers MISO and MOSI */
> > > + /* Size is as follow: */
> > > + /* Request burstcount value = 0x800 = 2048 */
> > > + /* + */
> > > + /* Response burstcount value = 0x400 = 1024 */
> > > + /* + */
> > > + /* At least: */
> > > + /* 1 byte for direction/locality */
> > > + /* 1 byte tpm tis register */
> > > + /* 2 bytes spi data length (for request only) */
> > > + /* 2 latency bytes */
> > > + /* 1 status byte */
> > > + /* = 2048 + 1024 + 7 */
> > > + /* We reserved 2048 + 1024 + 20 in case latency byte */
> > > + /* change */
> > > + platform_data = dev->dev.platform_data;
> > > + platform_data->tpm_spi_buffer[0] =
> > > + kmalloc((TPM_BUFSIZE + (TPM_BUFSIZE / 2) +
> > > + TPM_DIGEST_SIZE) * sizeof(u8), GFP_KERNEL);
> > > + if (platform_data->tpm_spi_buffer[0] == NULL) {
> > > + err = -ENOMEM;
> > > + goto _tpm_clean_answer;
> > > + }
> > > + platform_data->tpm_spi_buffer[1] =
> > > + kmalloc((TPM_BUFSIZE + (TPM_BUFSIZE / 2) +
> > > + TPM_DIGEST_SIZE) * sizeof(u8) , GFP_KERNEL);
> > > + if (platform_data->tpm_spi_buffer[1] == NULL) {
> > > + err = -ENOMEM;
> > > + goto _tpm_clean_response;
> > > + }
> > > +
> > > + chip->vendor.iobase = dev;
> > > +
> > > + /* Default timeouts */
> > > + chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
> > > + chip->vendor.timeout_b = msecs_to_jiffies(TIS_LONG_TIMEOUT);
> > > + chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
> > > + chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
> > > + chip->vendor.locality = LOCALITY0;
> > > +
> > > + if (power_mgt) {
> > > + err = gpio_request(platform_data->io_lpcpd, "TPM IO_LPCPD");
> > > + if (err)
> > > + goto _gpio_init1;
> > > + gpio_set_value(platform_data->io_lpcpd, 1);
> > > + }
> > > +
> > > + platform_data->latency = evaluate_latency(chip);
> > > + if (platform_data->latency <= 0x00) {
> > > + err = -ENODEV;
> > > + goto _gpio_init1;
> > > + }
> > > +
> > > + /* Enable interrupt */
> > > + /* Register GPIO pin through generic Linux GPIO API */
> > > + if (interrupts) {
> > > + init_completion(&platform_data->irq_detection);
> > > + if (request_locality(chip) != LOCALITY0) {
> > > + err = -ENODEV;
> > > + goto _tpm_clean_response;
> > > + }
> > > + err = gpio_request(platform_data->io_serirq, "TPM IO_SERIRQ");
> > > + if (err)
> > > + goto _gpio_init2;
> > > +
> > > + /* Clear all existing */
> > > + clear_interruption(chip);
> > > + err = request_irq(gpio_to_irq(platform_data->io_serirq),
> > > + &tpm_ioserirq_handler,
> > > + IRQF_TRIGGER_HIGH | IRQF_SHARED,
> > > + "TPM SERIRQ management", chip);
> > > + if (err < 0) {
> > > + pr_info("TPM SERIRQ signals %d not available\n",
> > > + gpio_to_irq(platform_data->io_serirq));
> > > + goto _irq_set;
> > > + }
> > > + err = SPI_READ_DATA(chip, TPM_INT_ENABLE, &intmask, 1);
> > > + if (err < 0)
> > > + goto _irq_set;
> > > +
> > > + intmask |= TPM_INTF_CMD_READY_INT
> > > + | TPM_INTF_FIFO_AVALAIBLE_INT
> > > + | TPM_INTF_WAKE_UP_READY_INT
> > > + | TPM_INTF_LOC4SOFTRELEASE_INT
> > > + | TPM_INTF_LOCALITY_CHANGE_INT
> > > + | TPM_INTF_STS_VALID_INT
> > > + | TPM_INTF_DATA_AVAIL_INT;
> > > +
> > > + err = SPI_WRITE_DATA(chip, TPM_INT_ENABLE, &intmask, 1);
> > > + if (err < 0)
> > > + goto _irq_set;
> > > +
> > > + intmask = TPM_GLOBAL_INT_ENABLE;
> > > + err = SPI_WRITE_DATA(chip, TPM_INT_ENABLE + 3, &intmask, 1);
> > > + if (err < 0)
> > > + goto _irq_set;
> > > +
> > > + err = SPI_READ_DATA(chip, TPM_INT_STATUS, &intmask, 1);
> > > + if (err < 0)
> > > + goto _irq_set;
> > > +
> > > + chip->vendor.irq = interrupts;
> > > +
> > > + tpm_gen_interrupt(chip);
> > > + }
> > > +
> > > + tpm_get_timeouts(chip);
> > > +
> > > + /* attach chip datas to client */
> > > + spi_set_drvdata(dev, chip);
> > > + platform_data->bchipf = false;
> > > +
> > > + pr_info("TPM SPI Initialized\n");
> > > + return 0;
> > > +_irq_set:
> > > + free_irq(gpio_to_irq(platform_data->io_serirq), chip);
> > > +_gpio_init2:
> > > + if (platform_data && interrupts)
> > > + gpio_free(platform_data->io_serirq);
> > > +_gpio_init1:
> > > + if (platform_data && power_mgt)
> > > + gpio_free(platform_data->io_lpcpd);
> > > +_tpm_clean_response:
> > > + tpm_remove_hardware(chip->dev);
> > > + if (platform_data->tpm_spi_buffer[1] != NULL) {
> > > + kfree(platform_data->tpm_spi_buffer[1]);
> > > + platform_data->tpm_spi_buffer[1] = NULL;
> > > + }
> > > +_tpm_clean_answer:
> > > + if (platform_data->tpm_spi_buffer[0] != NULL) {
> > > + kfree(platform_data->tpm_spi_buffer[0]);
> > > + platform_data->tpm_spi_buffer[0] = NULL;
> > > + }
> > > +
> > > + platform_data->bchipf = true;
> > > +end:
> > > + pr_info("TPM SPI initialisation fail\n");
> > > + return err;
> > > +}
> > > +
> > > +/*
> > > + * tpm_st33_spi_remove remove the TPM device
> > > + * @param: client, the spi_device drescription (TPM SPI description).
> > > + clear_bit(0, &chip->is_open);
> > > + * @return: 0 in case of success.
> > > + */
> > > +static int tpm_st33_spi_remove(struct spi_device *client) {
> > > + struct tpm_chip *chip = (struct tpm_chip *)spi_get_drvdata(client);
> > > + struct st33zp24_platform_data *pin_infos =
> > > + ((struct spi_device
> > > +*)chip->vendor.iobase)->dev.platform_data;
> > > +
> > > + if (pin_infos != NULL) {
> > > + gpio_free(pin_infos->io_lpcpd);
> > > +
> > > + /* Check if chip has been previously clean */
> > > + if (pin_infos->bchipf != true)
> >
> > You can still get rid of bchipf too. If probe() fails remove() won't be called - that seems to be all bchipf is checking...
> >
> > Kent
> >
> > > + tpm_remove_hardware(chip->dev);
> > > + if (pin_infos->tpm_spi_buffer[1] != NULL) {
> > > + kfree(pin_infos->tpm_spi_buffer[1]);
> > > + pin_infos->tpm_spi_buffer[1] = NULL;
> > > + }
> > > + if (pin_infos->tpm_spi_buffer[0] != NULL) {
> > > + kfree(pin_infos->tpm_spi_buffer[0]);
> > > + pin_infos->tpm_spi_buffer[0] = NULL;
> > > + }
> > > + }
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +/*
> > > + * tpm_st33_spi_pm_suspend suspend the TPM device
> > > + * Added: Work around when suspend and no tpm application is
> > > +running, suspend
> > > + * may fail because chip->data_buffer is not set (only set in
> > > +tpm_open in Linux
> > > + * TPM core)
> > > + * @param: client, the spi_device drescription (TPM SPI description).
> > > + * @param: mesg, the power management message.
> > > + * @return: 0 in case of success.
> > > + */
> > > +static int tpm_st33_spi_pm_suspend(struct spi_device *client,
> > > + pm_message_t
> > > +mesg) {
> > > + struct tpm_chip *chip =
> > > + (struct tpm_chip *)spi_get_drvdata(client);
> > > + struct st33zp24_platform_data *pin_infos =
> > > + ((struct spi_device *)chip->vendor.iobase)->dev.platform_data;
> > > + int ret = 0;
> > > +
> > > + if (power_mgt)
> > > + gpio_set_value(pin_infos->io_lpcpd, 0);
> > > + else {
> > > + if (chip->data_buffer == NULL)
> > > + chip->data_buffer = pin_infos->tpm_spi_buffer[0];
> > > + ret = tpm_pm_suspend(&client->dev);
> > > + }
> > > + return ret;
> > > +} /* tpm_st33_spi_suspend() */
> > > +
> > > +/*
> > > + * tpm_st33_spi_pm_resume resume the TPM device
> > > + * @param: spi, the spi_device drescription (TPM SPI description).
> > > + * @return: 0 in case of success.
> > > + */
> > > +static int tpm_st33_spi_pm_resume(struct spi_device *spi) {
> > > + struct tpm_chip *chip =
> > > + (struct tpm_chip *)spi_get_drvdata(spi);
> > > + struct st33zp24_platform_data *pin_infos =
> > > + ((struct spi_device
> > > +*)chip->vendor.iobase)->dev.platform_data;
> > > +
> > > + int ret = 0;
> > > + if (power_mgt) {
> > > + gpio_set_value(pin_infos->io_lpcpd, 1);
> > > + ret = wait_for_serirq_timeout(chip,
> > > + (chip->vendor.status(chip) &&
> > > + TPM_STS_VALID) == TPM_STS_VALID,
> > > + chip->vendor.timeout_b);
> > > + } else {
> > > + if (chip->data_buffer == NULL)
> > > + chip->data_buffer = pin_infos->tpm_spi_buffer[0];
> > > + ret = tpm_pm_resume(&spi->dev);
> > > + if (!ret)
> > > + tpm_do_selftest(chip);
> > > + }
> > > + return ret;
> > > +} /* tpm_st33_spi_pm_resume() */
> > > +
> > > +static struct spi_driver tpm_st33_spi_driver = {
> > > + .driver = {
> > > + .owner = THIS_MODULE,
> > > + .name = TPM_ST33_SPI,
> > > + },
> > > + .probe = tpm_st33_spi_probe,
> > > + .remove = tpm_st33_spi_remove,
> > > + .resume = tpm_st33_spi_pm_resume,
> > > + .suspend = tpm_st33_spi_pm_suspend, };
> > > +
> > > +/*
> > > + * tpm_st33_spi_init initialize driver
> > > + * @return: 0 if successful, else non zero value.
> > > + */
> > > +static int __init tpm_st33_spi_init(void) {
> > > + return spi_register_driver(&tpm_st33_spi_driver);
> > > +}
> > > +
> > > +/*
> > > + * tpm_st33_spi_exit The kernel calls this function during
> > > +unloading the
> > > + * module or during shut down process */ static void __exit
> > > +tpm_st33_spi_exit(void) {
> > > + spi_unregister_driver(&tpm_st33_spi_driver);
> > > +}
> > > +
> > > +module_init(tpm_st33_spi_init);
> > > +module_exit(tpm_st33_spi_exit);
> > > +
> > > +MODULE_AUTHOR("Christophe Ricard (tpmsupport@xxxxxx)");
> > > +MODULE_DESCRIPTION("STM TPM SPI ST33 Driver");
> > > +MODULE_VERSION("1.2.0"); MODULE_LICENSE("GPL");
> > > diff --git a/drivers/char/tpm/tpm_spi_stm_st33.h
> > > b/drivers/char/tpm/tpm_spi_stm_st33.h
> > > new file mode 100644
> > > index 0000000..752158e
> > > --- /dev/null
> > > +++ b/drivers/char/tpm/tpm_spi_stm_st33.h
> > > @@ -0,0 +1,86 @@
> > > +/*
> > > + * STMicroelectronics TPM SPI Linux driver for TPM ST33NP18
> > > + * Copyright (C) 2009, 2010 STMicroelectronics
> > > + *
> > > + * This program is free software; you can redistribute it and/or
> > > +modify
> > > + * it under the terms of the GNU General Public License as
> > > +published by
> > > + * the Free Software Foundation; either version 2 of the License,
> > > +or
> > > + * (at your option) any later version.
> > > + *
> > > + * This program is distributed in the hope that it will be useful,
> > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > > + * GNU General Public License for more details.
> > > + *
> > > + * You should have received a copy of the GNU General Public
> > > +License along
> > > + * with this program; if not, write to the Free Software
> > > +Foundation, Inc.,
> > > + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
> > > + *
> > > + * STMicroelectronics version 1.2.0, Copyright (C) 2010
> > > + * STMicroelectronics comes with ABSOLUTELY NO WARRANTY.
> > > + * This is free software, and you are welcome to redistribute it
> > > + * under certain conditions.
> > > + *
> > > + * @Author: Christophe RICARD tpmsupport@xxxxxx
> > > + *
> > > + * @File: tpm_spi_stm_st33.h
> > > + *
> > > + * @Date: 09/15/2010
> > > + */
> > > +#ifndef __STM_ST33_TPM_SPI_MAIN_H__ #define
> > > +__STM_ST33_TPM_SPI_MAIN_H__
> > > +
> > > +#include <linux/pci.h>
> > > +#include <linux/module.h>
> > > +#include <linux/platform_device.h>
> > > +#include <linux/fs.h>
> > > +#include <linux/miscdevice.h>
> > > +
> > > +#define MINOR_NUM_SPI 224
> > > +
> > > +#define TPM_ACCESS (0x0)
> > > +#define TPM_STS (0x18)
> > > +#define TPM_HASH_END (0x20)
> > > +#define TPM_DATA_FIFO (0x24)
> > > +#define TPM_HASH_DATA (0x24)
> > > +#define TPM_HASH_START (0x28)
> > > +#define TPM_INTF_CAPABILITY (0x14)
> > > +#define TPM_INT_STATUS (0x10)
> > > +#define TPM_INT_ENABLE (0x08)
> > > +
> > > +#define TPM_DUMMY_BYTE 0x00
> > > +#define TPM_WRITE_DIRECTION 0x80
> > > +#define TPM_HEADER_SIZE 10
> > > +#define TPM_BUFSIZE 2048
> > > +
> > > +/* ioctl commands */
> > > +#define TPMIOC_CANCEL _IO('T', 0x00)
> > > +#define TPMIOC_TRANSMIT _IO('T', 0x01)
> > > +#define TPMIOC_HASH _IO('T', 0x02)
> > > +#define TPMIOC_CHANGELOCALITY _IO('T', 0x03)
> > > +
> > > +#define LOCALITY0 0
> > > +#define LOCALITY4 4
> > > +
> > > +#define TPM_ST_SPI_OK 0x5A
> > > +
> > > +
> > > +#define MAX_SPI_LATENCY 15
> > > +
> > > +#define TPM_ST33_SPI "st33zp24_spi"
> > > +
> > > +struct st33zp24_platform_data {
> > > + int io_serirq;
> > > + int io_lpcpd;
> > > + int latency;
> > > + bool bchipf;
> > > + u8 *tpm_spi_buffer[2]; /* 0 Request 1 Response */
> > > + struct completion irq_detection; };
> > > +
> > > +struct st_tpm_hash_t {
> > > + int size;
> > > + u8 *data;
> > > +};
> > > +
> > > +#endif /* __STM_ST33_TPM_SPI_MAIN_H__ */
> > > --
> > > 1.7.1
> > >
> > >
> > > --------------------------------------------------------------------
> > > --
> > > -------- Precog is a next-generation analytics platform capable of
> > > advanced analytics on semi-structured data. The platform includes
> > > APIs for building apps and a phenomenal toolset for data science.
> > > Developers can use our toolset for easy data analysis & visualization.
> > > Get a free account!
> > > http://www2.precog.com/precogplatform/slashdotnewsletter
> > > _______________________________________________
> > > tpmdd-devel mailing list
> > > tpmdd-devel@xxxxxxxxxxxxxxxxxxxxx
> > > https://lists.sourceforge.net/lists/listinfo/tpmdd-devel
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/