Re: linux-next: Tree for Apr 26 [ bluetooth on suspend/resume ]

[Sedat Dilek]

On Fri, Apr 26, 2013 at 8:22 PM, Tejun Heo <tj@xxxxxxxxxx> wrote:
> On Fri, Apr 26, 2013 at 07:40:20PM +0200, Sedat Dilek wrote:
>> Oops, NULL-pointer-deref [ __queue_work() ]
>>
>> [   25.974932] BUG: unable to handle kernel NULL pointer dereference
>> at 0000000000000100
>> [   25.974944] IP: [<ffffffff81077502>] __queue_work+0x32/0x3d0
>
> So, 0x100 deref near the top of the function.
>
> ...
>> [   25.975037] RIP: 0010:[<ffffffff81077502>]  [<ffffffff81077502>]
>> __queue_work+0x32/0x3d0
>> [   25.975047] RSP: 0018:ffff88008fed5c48  EFLAGS: 00010046
>> [   25.975052] RAX: 0000000000000096 RBX: 0000000000000292 RCX: 0000000000000000
>> [   25.975058] RDX: ffff880095281850 RSI: 0000000000000000 RDI: 0000000000000100
>> [   25.975063] RBP: ffff88008fed5c88 R08: 0000000000000000 R09: 0000000000000300
>> [   25.975069] R10: ffff880094981a00 R11: 0000000000000000 R12: ffff880095281850
>> [   25.975074] R13: 0000000000000000 R14: 0000000000000100 R15: 00000000000009c4
>> [   25.975081] FS:  00007f2f61707740(0000) GS:ffff88011fac0000(0000)
>> knlGS:0000000000000000
>> [   25.975088] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>> [   25.975093] CR2: 0000000000000100 CR3: 000000009101f000 CR4: 00000000000407e0
>> [   25.975099] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>> [   25.975104] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> ...
>> [   25.975143] Call Trace:
>> [   25.975151]  [<ffffffff81077be5>] queue_work_on+0x45/0x50
>> [   25.975165]  [<ffffffffa016e8ff>] hci_req_run+0xbf/0xf0 [bluetooth]
>> [   25.975188]  [<ffffffffa016ea06>] __hci_req_sync+0xd6/0x1c0 [bluetooth]
>> [   25.975217]  [<ffffffffa016fad5>] hci_dev_open+0x275/0x2e0 [bluetooth]
>> [   25.975230]  [<ffffffffa0182752>] hci_sock_ioctl+0x1f2/0x3f0 [bluetooth]
>> [   25.975238]  [<ffffffff815c6050>] sock_do_ioctl+0x30/0x70
>> [   25.975245]  [<ffffffff815c75f9>] sock_ioctl+0x79/0x2f0
>> [   25.975254]  [<ffffffff811a8046>] do_vfs_ioctl+0x96/0x560
>> [   25.975262]  [<ffffffff811a85a1>] SyS_ioctl+0x91/0xb0
>> [   25.975271]  [<ffffffff816d989d>] system_call_fastpath+0x1a/0x1f
>> [   25.975276] Code: 89 e5 41 57 41 56 41 89 fe 41 55 49 89 f5 41 54
>> 49 89 d4 53 48 83 ec 18 89 7d c8 9c 58 66 66 90 66 90 f6 c4 02 0f 85
>> 56 02 00 00 <41> 8b 85 00 01 00 00 a9 00 00 01 00 0f 85 b0 02 00 00 48
>> c7 c2
>
> All code
> ========
>    0:   89 e5                   mov    %esp,%ebp
>    2:   41 57                   push   %r15
>    4:   41 56                   push   %r14
>    6:   41 89 fe                mov    %edi,%r14d
>    9:   41 55                   push   %r13
>    b:   49 89 f5                mov    %rsi,%r13
>    e:   41 54                   push   %r12
>   10:   49 89 d4                mov    %rdx,%r12
>   13:   53                      push   %rbx
>   14:   48 83 ec 18             sub    $0x18,%rsp
>   18:   89 7d c8                mov    %edi,-0x38(%rbp)
>   1b:   9c                      pushfq
>   1c:   58                      pop    %rax
>   1d:   66 66 90                data32 xchg %ax,%ax
>   20:   66 90                   xchg   %ax,%ax
>   22:   f6 c4 02                test   $0x2,%ah
>   25:   0f 85 56 02 00 00       jne    0x281
>   2b:*  41 8b 85 00 01 00 00    mov    0x100(%r13),%eax     <-- trapping instruction
>   32:   a9 00 00 01 00          test   $0x10000,%eax
>   37:   0f 85 b0 02 00 00       jne    0x2ed
>   3d:   48                      rex.W
>   3e:   c7                      .byte 0xc7
>   3f:   c2                      .byte 0xc2
>
> The second argument %rsi is zero, which got transferred to %r13 and
> then offset deref on it trapped.
>
> The second argument is @wq and the oopsing code is the wq->flags deref
> in the following if condition.
>
>         /* if dying, only works from the same workqueue are allowed */
>         if (unlikely(wq->flags & __WQ_DRAINING) &&
>                 WARN_ON_ONCE(!is_chained_work(wq)))
>                 return;
>
> So, umm, don't pass in NULL as @wq. :)
>

[ CC Frederic (linux-dynticks) ]

Great, Tejun!
Anyway a bug...

Just wanted to mention I switched to a full-cpu-dynticks config-setup:

1. TICK_CPU_ACCOUNTING -> VIRT_CPU_ACCOUNTING_GEN

2. [X] NO_HZ_FULL

>From [2]:

 config VIRT_CPU_ACCOUNTING_GEN
bool "Full dynticks CPU time accounting"
- depends on HAVE_CONTEXT_TRACKING && 64BIT
+ depends on HAVE_CONTEXT_TRACKING && 64BIT && NO_HZ_FULL

Choosing NO_HZ_FULL depends leads to a different kernel-config which
seems not to show the trace.

- Sedat -

[1] http://git.kernel.org/cgit/linux/kernel/git/frederic/linux-dynticks.git/log/?h=timers/nohz
[2] http://git.kernel.org/cgit/linux/kernel/git/frederic/linux-dynticks.git/commit/?h=timers/nohz&id=7f40072a53838380e3902d94fae49efed506b34e

> --
> tejun
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.9.0-rc8-next20130426-4-iniza-small (sedat.dilek@xxxxxxxxx@fambox) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP Fri Apr 26 20:16:00 CEST 2013
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.9.0-rc8-next20130426-4-iniza-small root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] Disabled fast string operations
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000d9c9efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d9c9f000-0x00000000dae7efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dae7f000-0x00000000daf9efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FE0000000 write-back
[    0.000000]   3 base 0DC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0DB000000 mask FFF000000 uncachable
[    0.000000]   5 base 100000000 mask FE0000000 write-back
[    0.000000]   6 base 11FE00000 mask FFFE00000 uncachable
[    0.000000]   7 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f00e0-0x000f00ef] mapped at [ffff8800000f00e0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x02030000, 0x02030fff] PGTABLE
[    0.000000] BRK [0x02031000, 0x02031fff] PGTABLE
[    0.000000] BRK [0x02032000, 0x02032fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x11fc00000-0x11fdfffff]
[    0.000000]  [mem 0x11fc00000-0x11fdfffff] page 2M
[    0.000000] BRK [0x02033000, 0x02033fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x11c000000-0x11fbfffff]
[    0.000000]  [mem 0x11c000000-0x11fbfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
[    0.000000]  [mem 0x100000000-0x11bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x40200000-0xd9c9efff]
[    0.000000]  [mem 0x40200000-0xd9bfffff] page 2M
[    0.000000]  [mem 0xd9c00000-0xd9c9efff] page 4k
[    0.000000] BRK [0x02034000, 0x02034fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xdafff000-0xdaffffff]
[    0.000000]  [mem 0xdafff000-0xdaffffff] page 4k
[    0.000000] RAMDISK: [mem 0x3799c000-0x37cc5fff]
[    0.000000] ACPI: RSDP 00000000000f0100 00024 (v02 SECCSD)
[    0.000000] ACPI: XSDT 00000000daffe170 0008C (v01 SECCSD LH43STAR 00000002 PTEC 00000002)
[    0.000000] ACPI: FACP 00000000dafef000 0010C (v05 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: DSDT 00000000daff2000 083AC (v02 SECCSD  SNB-CPT 00000000 INTL 20061109)
[    0.000000] ACPI: FACS 00000000daf47000 00040
[    0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001)
[    0.000000] ACPI: SSDT 00000000daffb000 01068 (v01 SECCSD PtidDevc 00001000 INTL 20061109)
[    0.000000] ACPI: ASF! 00000000daff1000 000A5 (v32 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: HPET 00000000dafee000 00038 (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: APIC 00000000dafed000 00098 (v03 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: MCFG 00000000dafec000 0003C (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: SSDT 00000000dafeb000 00804 (v01  PmRef  Cpu0Ist 00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 00000000dafea000 00996 (v01  PmRef    CpuPm 00003000 INTL 20061109)
[    0.000000] ACPI: UEFI 00000000dafe9000 0003E (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: UEFI 00000000dafe8000 00042 (v01 PTL      COMBUF 00000001 PTL  00000001)
[    0.000000] ACPI: UEFI 00000000dafe7000 0026A (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: SSDT 00000000dafe6000 000D0 (v01   Iffs  IffsAsl 00003000 INTL 20061109)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x11fdfffff]
[    0.000000]   NODE_DATA [mem 0x11fdf7000-0x11fdfbfff]
[    0.000000]  [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011b400000-ffff88011edfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x11fdfffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x3fffffff]
[    0.000000]   node   0: [mem 0x40200000-0xd9c9efff]
[    0.000000]   node   0: [mem 0xdafff000-0xdaffffff]
[    0.000000]   node   0: [mem 0x100000000-0x11fdfffff]
[    0.000000] On node 0 totalpages: 1021500
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 156 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12127 pages used for memmap
[    0.000000]   DMA32 zone: 886944 pages, LIFO batch:31
[    0.000000]   Normal zone: 1785 pages used for memmap
[    0.000000]   Normal zone: 130560 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[    0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[    0.000000] PM: Registered nosave memory: 00000000d9c9f000 - 00000000dae7f000
[    0.000000] PM: Registered nosave memory: 00000000dae7f000 - 00000000daf9f000
[    0.000000] PM: Registered nosave memory: 00000000daf9f000 - 00000000dafff000
[    0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000dfa00000
[    0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
[    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[    0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000
[    0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
[    0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
[    0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[    0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
[    0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88011fa00000 s86912 r8192 d23680 u262144
[    0.000000] pcpu-alloc: s86912 r8192 d23680 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1007376
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.9.0-rc8-next20130426-4-iniza-small root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3938688k/4716544k available (7042k kernel code, 630544k absent, 147312k reserved, 6265k data, 1316k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] NR_IRQS:16640 nr_irqs:744 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 16777216 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] ODEBUG: 0 of 0 active objects replaced
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 1596.375 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.75 BogoMIPS (lpj=6385500)
[    0.000009] pid_max: default: 32768 minimum: 301
[    0.000141] Security Framework initialized
[    0.000152] AppArmor: AppArmor initialized
[    0.000155] Yama: becoming mindful.
[    0.000541] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001601] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.002069] Mount-cache hash table entries: 256
[    0.002593] Initializing cgroup subsys memory
[    0.002662] Initializing cgroup subsys devices
[    0.002666] Initializing cgroup subsys freezer
[    0.002670] Initializing cgroup subsys blkio
[    0.002674] Initializing cgroup subsys perf_event
[    0.002678] Initializing cgroup subsys hugetlb
[    0.002762] Disabled fast string operations
[    0.002766] CPU: Physical Processor ID: 0
[    0.002769] CPU: Processor Core ID: 0
[    0.002775] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.002775] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.002782] mce: CPU supports 7 MCE banks
[    0.002799] CPU0: Thermal monitoring enabled (TM1)
[    0.002812] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[    0.002812] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[    0.002812] tlb_flushall_shift: 5
[    0.002905] Freeing SMP alternatives: 24k freed
[    0.003893] ACPI: Core revision 20130328
[    0.014725] ACPI: All ACPI Tables successfully acquired
[    0.016273] ftrace: allocating 26574 entries in 104 pages
[    0.031170] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.070831] smpboot: CPU0: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz (fam: 06, model: 2a, stepping: 07)
[    0.070844] TSC deadline timer enabled
[    0.070857] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[    0.070870] ... version:                3
[    0.070872] ... bit width:              48
[    0.070874] ... generic registers:      4
[    0.070877] ... value mask:             0000ffffffffffff
[    0.070879] ... max period:             000000007fffffff
[    0.070882] ... fixed-purpose events:   3
[    0.070884] ... event mask:             000000070000000f
[    0.083957] Disabled fast string operations
[    0.087145] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.098698] Disabled fast string operations
[    0.112367] Disabled fast string operations
[    0.072924] smpboot: Booting Node   0, Processors  #1 #2 #3
[    0.114502] Brought up 4 CPUs
[    0.114510] smpboot: Total of 4 processors activated (12771.00 BogoMIPS)
[    0.118532] devtmpfs: initialized
[    0.120513] EVM: security.selinux
[    0.120517] EVM: security.SMACK64
[    0.120519] EVM: security.capability
[    0.120610] PM: Registering ACPI NVS region [mem 0xdae7f000-0xdaf9efff] (1179648 bytes)
[    0.122110] regulator-dummy: no parameters
[    0.122262] NET: Registered protocol family 16
[    0.122611] ACPI: bus type PCI registered
[    0.122728] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.122734] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.129461] PCI: Using configuration type 1 for base access
[    0.132777] bio: create slab <bio-0> at 0
[    0.133190] ACPI: Added _OSI(Module Device)
[    0.133195] ACPI: Added _OSI(Processor Device)
[    0.133199] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.133202] ACPI: Added _OSI(Processor Aggregator Device)
[    0.135003] ACPI: EC: Look up EC in DSDT
[    0.162576] ACPI: Executed 1 blocks of module-level executable AML code
[    0.168531] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.181039] ACPI: SSDT 00000000dae70718 00688 (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
[    0.181547] ACPI: Dynamic OEM Table Load:
[    0.181552] ACPI: SSDT           (null) 00688 (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
[    0.195015] ACPI: SSDT 00000000dae71a98 00303 (v01  PmRef    ApIst 00003000 INTL 20061109)
[    0.195602] ACPI: Dynamic OEM Table Load:
[    0.195606] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20061109)
[    0.206689] ACPI: SSDT 00000000dae6fd98 00119 (v01  PmRef    ApCst 00003000 INTL 20061109)
[    0.207170] ACPI: Dynamic OEM Table Load:
[    0.207174] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20061109)
[    0.224984] ACPI: Interpreter enabled
[    0.225002] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
[    0.225026] ACPI: (supports S0 S1 S3 S4 S5)
[    0.225030] ACPI: Using IOAPIC for interrupt routing
[    0.225087] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.248731] ACPI: Power Resource [FN00] (off)
[    0.248918] ACPI: Power Resource [FN01] (off)
[    0.249104] ACPI: Power Resource [FN02] (off)
[    0.249289] ACPI: Power Resource [FN03] (off)
[    0.249474] ACPI: Power Resource [FN04] (off)
[    0.250577] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.250921] \_SB_.PCI0:_OSC invalid UUID
[    0.250923] _OSC request data:1 8 0 
[    0.251906] PCI host bridge to bus 0000:00
[    0.251912] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.251917] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.251921] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.251925] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.251929] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[    0.251932] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[    0.251951] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.252110] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    0.252123] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
[    0.252131] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.252136] pci 0000:00:02.0: reg 20: [io  0x3000-0x303f]
[    0.252323] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.252349] pci 0000:00:16.0: reg 10: [mem 0xf0705000-0xf070500f 64bit]
[    0.252434] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.252597] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.252622] pci 0000:00:1a.0: reg 10: [mem 0xf070a000-0xf070a3ff]
[    0.252722] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.252828] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.252846] pci 0000:00:1b.0: reg 10: [mem 0xf0700000-0xf0703fff 64bit]
[    0.252925] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.252971] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.253041] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.253132] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.253181] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.253256] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.253345] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.253400] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.253473] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[    0.253605] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.253738] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.253763] pci 0000:00:1d.0: reg 10: [mem 0xf0709000-0xf07093ff]
[    0.253863] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.253968] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[    0.254168] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.254190] pci 0000:00:1f.2: reg 10: [io  0x3088-0x308f]
[    0.254201] pci 0000:00:1f.2: reg 14: [io  0x3094-0x3097]
[    0.254211] pci 0000:00:1f.2: reg 18: [io  0x3080-0x3087]
[    0.254220] pci 0000:00:1f.2: reg 1c: [io  0x3090-0x3093]
[    0.254229] pci 0000:00:1f.2: reg 20: [io  0x3060-0x307f]
[    0.254240] pci 0000:00:1f.2: reg 24: [mem 0xf0708000-0xf07087ff]
[    0.254292] pci 0000:00:1f.2: PME# supported from D3hot
[    0.254413] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.254431] pci 0000:00:1f.3: reg 10: [mem 0xf0704000-0xf07040ff 64bit]
[    0.254455] pci 0000:00:1f.3: reg 20: [io  0xefa0-0xefbf]
[    0.254835] pci 0000:01:00.0: [8086:0091] type 00 class 0x028000
[    0.255000] pci 0000:01:00.0: reg 10: [mem 0xf0600000-0xf0601fff 64bit]
[    0.255735] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.255905] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.262651] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.262660] pci 0000:00:1c.0:   bridge window [mem 0xf0600000-0xf06fffff]
[    0.262837] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.262909] pci 0000:02:00.0: reg 10: [io  0x2000-0x20ff]
[    0.263031] pci 0000:02:00.0: reg 18: [mem 0xf0404000-0xf0404fff 64bit pref]
[    0.263107] pci 0000:02:00.0: reg 20: [mem 0xf0400000-0xf0403fff 64bit pref]
[    0.263445] pci 0000:02:00.0: supports D1 D2
[    0.263447] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.263573] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.270585] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.270600] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.270622] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.270822] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[    0.270860] pci 0000:03:00.0: reg 10: [mem 0xf0500000-0xf0507fff 64bit]
[    0.271059] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.278579] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.278599] pci 0000:00:1c.4:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.278795] \_SB_.PCI0:_OSC invalid UUID
[    0.278797] _OSC request data:1 1f 0 
[    0.278801] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.278806] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.279681] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.279801] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.279920] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.280036] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.280151] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[    0.280267] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.280384] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.280499] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[    0.281118] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.281128] acpi root: \_SB_.PCI0 notify handler is installed
[    0.281192] Found 1 acpi root devices
[    0.281258] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.281468] ACPI: No dock devices found.
[    0.281673] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.281680] vgaarb: loaded
[    0.281682] vgaarb: bridge control possible 0000:00:02.0
[    0.282362] SCSI subsystem initialized
[    0.282366] ACPI: bus type ATA registered
[    0.282488] libata version 3.00 loaded.
[    0.282550] ACPI: bus type USB registered
[    0.282602] usbcore: registered new interface driver usbfs
[    0.282625] usbcore: registered new interface driver hub
[    0.282681] usbcore: registered new device driver usb
[    0.283004] PCI: Using ACPI for IRQ routing
[    0.284672] PCI: pci_cache_line_size set to 64 bytes
[    0.284784] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.284787] e820: reserve RAM buffer [mem 0xd9c9f000-0xdbffffff]
[    0.284789] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[    0.284791] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff]
[    0.285066] NetLabel: Initializing
[    0.285069] NetLabel:  domain hash size = 128
[    0.285072] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.285121] NetLabel:  unlabeled traffic allowed by default
[    0.285207] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.285216] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.287233] Switching to clocksource hpet
[    0.304323] AppArmor: AppArmor Filesystem Enabled
[    0.304383] pnp: PnP ACPI init
[    0.304401] ACPI: bus type PNP registered
[    0.304816] pnp 00:00: [dma 4]
[    0.304860] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.304903] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[    0.305074] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.305129] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.305207] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.305213] system 00:04: [io  0x1000-0x100f] has been reserved
[    0.305217] system 00:04: [io  0x5000-0x5003] has been reserved
[    0.305222] system 00:04: [io  0xffff] has been reserved
[    0.305226] system 00:04: [io  0x0400-0x0453] has been reserved
[    0.305230] system 00:04: [io  0x0458-0x047f] has been reserved
[    0.305234] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.305239] system 00:04: [io  0x0a00-0x0a0f] has been reserved
[    0.305243] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.305248] system 00:04: [io  0x5000-0x500f] could not be reserved
[    0.305253] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.305300] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.305395] system 00:06: [io  0x0454-0x0457] has been reserved
[    0.305401] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.305466] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.305552] pnp 00:08: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
[    0.305865] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.305870] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.305875] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.305879] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.305884] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.305888] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.305892] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.305897] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.305902] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[    0.305907] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.305912] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.306593] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.306633] pnp: PnP ACPI: found 11 devices
[    0.306637] ACPI: bus type PNP unregistered
[    0.314732] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.314742] pci 0000:00:1c.0:   bridge window [mem 0xf0600000-0xf06fffff]
[    0.314755] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.314760] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.314771] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.314781] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.314788] pci 0000:00:1c.4:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.315225] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.315237] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.315241] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.315244] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff]
[    0.315246] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[    0.315249] pci_bus 0000:01: resource 1 [mem 0xf0600000-0xf06fffff]
[    0.315251] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.315253] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.315255] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff]
[    0.315394] NET: Registered protocol family 2
[    0.315769] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[    0.315952] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
[    0.316234] TCP: Hash tables configured (established 32768 bind 32768)
[    0.316495] TCP: reno registered
[    0.316516] UDP hash table entries: 2048 (order: 5, 196608 bytes)
[    0.316583] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
[    0.316834] NET: Registered protocol family 1
[    0.316856] pci 0000:00:02.0: Boot video device
[    0.317624] PCI: CLS 64 bytes, default 64
[    0.317836] Trying to unpack rootfs image as initramfs...
[    0.390442] Freeing initrd memory: 3240k freed
[    0.391132] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.391142] software IO TLB [mem 0xd5c9f000-0xd9c9f000] (64MB) mapped at [ffff8800d5c9f000-ffff8800d9c9efff]
[    0.391502] Scanning for low memory corruption every 60 seconds
[    0.391908] Initialise module verification
[    0.391978] audit: initializing netlink socket (disabled)
[    0.392006] type=2000 audit(1367007623.388:1): initialized
[    0.421670] bounce pool size: 64 pages
[    0.421698] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.422405] VFS: Disk quotas dquot_6.5.2
[    0.422451] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.423315] fuse init (API version 7.21)
[    0.423432] msgmni has been set to 7699
[    0.424145] Key type asymmetric registered
[    0.424151] Asymmetric key parser 'x509' registered
[    0.424208] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.424270] io scheduler noop registered
[    0.424275] io scheduler deadline registered (default)
[    0.424315] io scheduler cfq registered
[    0.424711] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.424756] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.424850] intel_idle: MWAIT substates: 0x21120
[    0.424852] intel_idle: v0.4 model 0x2A
[    0.424853] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.425407] ACPI: AC Adapter [ADP1] (on-line)
[    0.425798] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    0.425824] ACPI: Lid Switch [LID0]
[    0.425894] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.425902] ACPI: Power Button [PWRB]
[    0.425966] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.425974] ACPI: Power Button [PWRF]
[    0.426070] ACPI: Fan [FAN0] (off)
[    0.426127] ACPI: Fan [FAN1] (off)
[    0.426180] ACPI: Fan [FAN2] (off)
[    0.426234] ACPI: Fan [FAN3] (off)
[    0.426291] ACPI: Fan [FAN4] (off)
[    0.426386] ACPI: Requesting acpi_cpufreq
[    0.433842] thermal LNXTHERM:00: registered as thermal_zone0
[    0.433848] ACPI: Thermal Zone [TZ00] (66 C)
[    0.434274] thermal LNXTHERM:01: registered as thermal_zone1
[    0.434278] ACPI: Thermal Zone [TZ01] (30 C)
[    0.434326] GHES: HEST is not enabled!
[    0.434543] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.439710] ACPI: Battery Slot [BAT1] (battery present)
[    0.439729] Linux agpgart interface v0.103
[    0.442200] brd: module loaded
[    0.443513] loop: module loaded
[    0.443741] mei_me 0000:00:16.0: setting latency timer to 64
[    0.443786] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X
[    0.446743] ahci 0000:00:1f.2: version 3.0
[    0.446918] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    0.447154] ahci: SSS flag set, parallel bus scan disabled
[    0.463168] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode
[    0.463175] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst 
[    0.463183] ahci 0000:00:1f.2: setting latency timer to 64
[    0.487953] scsi0 : ahci
[    0.488123] scsi1 : ahci
[    0.488248] scsi2 : ahci
[    0.488369] scsi3 : ahci
[    0.488495] scsi4 : ahci
[    0.488661] scsi5 : ahci
[    0.488740] ata1: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708100 irq 41
[    0.488746] ata2: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708180 irq 41
[    0.488750] ata3: DUMMY
[    0.488754] ata4: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708280 irq 41
[    0.488759] ata5: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708300 irq 41
[    0.488762] ata6: DUMMY
[    0.489585] libphy: Fixed MDIO Bus: probed
[    0.489851] tun: Universal TUN/TAP device driver, 1.6
[    0.489855] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[    0.489933] PPP generic driver version 2.4.2
[    0.490046] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.490050] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
[    0.490058] ehci-pci: EHCI PCI platform driver
[    0.490241] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    0.490250] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.490261] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.490282] ehci-pci 0000:00:1a.0: debug port 2
[    0.490289] ehci-pci 0000:00:1a.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
[    0.490293] ehci-pci 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr
[    0.490332] ehci-pci 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[    0.494226] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.494228] ehci-pci 0000:00:1a.0: supports USB remote wakeup
[    0.494274] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf070a000
[    0.494281] ehci-pci 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[    0.503110] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.503162] usb usb1: default language 0x0409
[    0.503175] usb usb1: udev 1, busnum 1, minor = 0
[    0.503178] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.503181] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.503186] usb usb1: Product: EHCI Host Controller
[    0.503189] usb usb1: Manufacturer: Linux 3.9.0-rc8-next20130426-4-iniza-small ehci_hcd
[    0.503193] usb usb1: SerialNumber: 0000:00:1a.0
[    0.503317] usb usb1: usb_probe_device
[    0.503320] usb usb1: configuration #1 chosen from 1 choice
[    0.503331] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[    0.503364] hub 1-0:1.0: usb_probe_interface
[    0.503366] hub 1-0:1.0: usb_probe_interface - got id
[    0.503369] hub 1-0:1.0: USB hub found
[    0.503378] hub 1-0:1.0: 2 ports detected
[    0.503381] hub 1-0:1.0: standalone hub
[    0.503383] hub 1-0:1.0: no power switching (usb 1.0)
[    0.503384] hub 1-0:1.0: individual port over-current protection
[    0.503386] hub 1-0:1.0: power on to power good time: 20ms
[    0.503392] hub 1-0:1.0: local power source is good
[    0.503450] hub 1-0:1.0: trying to enable port power on non-switchable hub
[    0.503672] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    0.503680] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.503689] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.503709] ehci-pci 0000:00:1d.0: debug port 2
[    0.503715] ehci-pci 0000:00:1d.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
[    0.503719] ehci-pci 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr
[    0.503753] ehci-pci 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[    0.507645] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.507647] ehci-pci 0000:00:1d.0: supports USB remote wakeup
[    0.507691] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0709000
[    0.507698] ehci-pci 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[    0.519098] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.519143] usb usb2: default language 0x0409
[    0.519155] usb usb2: udev 1, busnum 2, minor = 128
[    0.519157] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.519161] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.519165] usb usb2: Product: EHCI Host Controller
[    0.519168] usb usb2: Manufacturer: Linux 3.9.0-rc8-next20130426-4-iniza-small ehci_hcd
[    0.519172] usb usb2: SerialNumber: 0000:00:1d.0
[    0.519289] usb usb2: usb_probe_device
[    0.519292] usb usb2: configuration #1 chosen from 1 choice
[    0.519301] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[    0.519333] hub 2-0:1.0: usb_probe_interface
[    0.519335] hub 2-0:1.0: usb_probe_interface - got id
[    0.519337] hub 2-0:1.0: USB hub found
[    0.519346] hub 2-0:1.0: 2 ports detected
[    0.519349] hub 2-0:1.0: standalone hub
[    0.519351] hub 2-0:1.0: no power switching (usb 1.0)
[    0.519352] hub 2-0:1.0: individual port over-current protection
[    0.519354] hub 2-0:1.0: power on to power good time: 20ms
[    0.519359] hub 2-0:1.0: local power source is good
[    0.519410] hub 2-0:1.0: trying to enable port power on non-switchable hub
[    0.519488] ehci-platform: EHCI generic platform driver
[    0.519507] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.519511] ohci_hcd: block sizes: ed 80 td 96
[    0.519548] uhci_hcd: USB Universal Host Controller Interface driver
[    0.519747] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.519759] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[    0.529469] xhci_hcd 0000:03:00.0: supports USB remote wakeup
[    0.529499] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
[    0.529507] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
[    0.529514] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
[    0.529521] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
[    0.529528] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
[    0.529798] usb usb3: default language 0x0409
[    0.529810] usb usb3: udev 1, busnum 3, minor = 256
[    0.529812] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.529816] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.529821] usb usb3: Product: xHCI Host Controller
[    0.529824] usb usb3: Manufacturer: Linux 3.9.0-rc8-next20130426-4-iniza-small xhci_hcd
[    0.529828] usb usb3: SerialNumber: 0000:03:00.0
[    0.529934] usb usb3: usb_probe_device
[    0.529937] usb usb3: configuration #1 chosen from 1 choice
[    0.529942] xHCI xhci_add_endpoint called for root hub
[    0.529943] xHCI xhci_check_bandwidth called for root hub
[    0.529949] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[    0.529982] hub 3-0:1.0: usb_probe_interface
[    0.529984] hub 3-0:1.0: usb_probe_interface - got id
[    0.529986] hub 3-0:1.0: USB hub found
[    0.530001] hub 3-0:1.0: 2 ports detected
[    0.530004] hub 3-0:1.0: standalone hub
[    0.530005] hub 3-0:1.0: no power switching (usb 1.0)
[    0.530007] hub 3-0:1.0: individual port over-current protection
[    0.530008] hub 3-0:1.0: Single TT
[    0.530010] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns)
[    0.530012] hub 3-0:1.0: power on to power good time: 20ms
[    0.530017] hub 3-0:1.0: local power source is good
[    0.530057] hub 3-0:1.0: trying to enable port power on non-switchable hub
[    0.530125] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.530133] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[    0.530147] xhci_hcd 0000:03:00.0: supports USB remote wakeup
[    0.530182] usb usb4: skipped 1 descriptor after endpoint
[    0.530187] usb usb4: default language 0x0409
[    0.530201] usb usb4: udev 1, busnum 4, minor = 384
[    0.530203] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.530207] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.530211] usb usb4: Product: xHCI Host Controller
[    0.530214] usb usb4: Manufacturer: Linux 3.9.0-rc8-next20130426-4-iniza-small xhci_hcd
[    0.530218] usb usb4: SerialNumber: 0000:03:00.0
[    0.530319] usb usb4: usb_probe_device
[    0.530322] usb usb4: configuration #1 chosen from 1 choice
[    0.530326] xHCI xhci_add_endpoint called for root hub
[    0.530327] xHCI xhci_check_bandwidth called for root hub
[    0.530333] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[    0.530362] hub 4-0:1.0: usb_probe_interface
[    0.530364] hub 4-0:1.0: usb_probe_interface - got id
[    0.530366] hub 4-0:1.0: USB hub found
[    0.530379] hub 4-0:1.0: 2 ports detected
[    0.530382] hub 4-0:1.0: standalone hub
[    0.530383] hub 4-0:1.0: no power switching (usb 1.0)
[    0.530385] hub 4-0:1.0: individual port over-current protection
[    0.530387] hub 4-0:1.0: TT requires at most 8 FS bit times (666 ns)
[    0.530388] hub 4-0:1.0: power on to power good time: 20ms
[    0.530393] hub 4-0:1.0: local power source is good
[    0.530431] hub 4-0:1.0: trying to enable port power on non-switchable hub
[    0.551145] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12
[    0.557419] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.557427] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.557649] mousedev: PS/2 mouse device common for all mice
[    0.558107] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.558145] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.558214] device-mapper: uevent: version 1.0.3
[    0.558303] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@xxxxxxxxxx
[    0.558314] Intel P-state driver initializing.
[    0.564533] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.599044] Intel pstate controlling: cpu 0
[    0.599071] Intel pstate controlling: cpu 1
[    0.599101] Intel pstate controlling: cpu 2
[    0.599125] Intel pstate controlling: cpu 3
[    0.599361] cpuidle: using governor ladder
[    0.599371] ledtrig-cpu: registered to indicate activity on CPUs
[    0.599602] ashmem: initialized
[    0.599762] TCP: cubic registered
[    0.599867] NET: Registered protocol family 10
[    0.600406] NET: Registered protocol family 17
[    0.600429] Key type dns_resolver registered
[    0.600931] PM: Hibernation image not present or could not be loaded.
[    0.600934] Loading module verification certificates
[    0.602281] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 3eb2c28cbaf2c52645fbe8670c16f4f0265d4e6b'
[    0.602319] registered taskstats version 1
[    0.603055] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001803 0  ACK POWER sig=j CSC CONNECT
[    0.603062] hub 1-0:1.0: port 1: status 0501 change 0001
[    0.606160] Key type trusted registered
[    0.613386] Key type encrypted registered
[    0.619099] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001803 0  ACK POWER sig=j CSC CONNECT
[    0.619114] hub 2-0:1.0: port 1: status 0501 change 0001
[    0.623374] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.623386] EDD information not available.
[    0.627120] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    0.627144] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    0.627301] hub 3-0:1.0: hub_suspend
[    0.627315] usb usb3: bus auto-suspend, wakeup 1
[    0.627370] hub 4-0:1.0: hub_suspend
[    0.627377] usb usb4: bus auto-suspend, wakeup 1
[    0.703163] hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000
[    0.703204] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[    0.759252] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled
[    0.759269] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
[    0.807022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.808223] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133
[    0.808244] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.809286] ata1.00: configured for UDMA/133
[    0.809812] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54505 GG2O PQ: 0 ANSI: 5
[    0.810456] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    0.810480] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.810644] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.810791] sd 0:0:0:0: [sda] Write Protect is off
[    0.810804] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.810982] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.814943] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.855379]  sda: sda1 sda2 sda3
[    0.857168] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.871169] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled
[    0.871185] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
[    0.947358] usb 1-1: udev 2, busnum 1, minor = 1
[    0.947369] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    0.947382] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.947653] usb 1-1: usb_probe_device
[    0.947662] usb 1-1: configuration #1 chosen from 1 choice
[    0.947794] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[    0.947877] hub 1-1:1.0: usb_probe_interface
[    0.947883] hub 1-1:1.0: usb_probe_interface - got id
[    0.947891] hub 1-1:1.0: USB hub found
[    0.948034] hub 1-1:1.0: 6 ports detected
[    0.948045] hub 1-1:1.0: standalone hub
[    0.948049] hub 1-1:1.0: individual port power switching
[    0.948053] hub 1-1:1.0: individual port over-current protection
[    0.948057] hub 1-1:1.0: Single TT
[    0.948061] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
[    0.948065] hub 1-1:1.0: power on to power good time: 100ms
[    0.948327] hub 1-1:1.0: local power source is good
[    0.948834] hub 1-1:1.0: enabling power on all ports
[    0.949812] hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000
[    0.949830] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[    1.003072] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled
[    1.003083] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
[    1.047238] hub 1-1:1.0: port 2: status 0101 change 0001
[    1.047559] hub 1-1:1.0: port 4: status 0101 change 0001
[    1.058746] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.114991] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled
[    1.115002] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
[    1.130740] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.131508] ata2.00: ATA-8: SanDisk iSSD P4 16GB, SSD 9.14, max UDMA/133
[    1.131524] ata2.00: 31277232 sectors, multi 1: LBA48 
[    1.132192] ata2.00: configured for UDMA/133
[    1.132522] scsi 1:0:0:0: Direct-Access     ATA      SanDisk iSSD P4  SSD  PQ: 0 ANSI: 5
[    1.133060] sd 1:0:0:0: [sdb] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
[    1.133115] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.133280] sd 1:0:0:0: [sdb] Write Protect is off
[    1.133293] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.133396] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.134715]  sdb: sdb1 sdb2
[    1.135805] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.146719] usb 1-1: link qh256-0001/ffff8801186d1440 start 1 [1/0 us]
[    1.191181] usb 2-1: udev 2, busnum 2, minor = 129
[    1.191191] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.191204] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.191470] usb 2-1: usb_probe_device
[    1.191478] usb 2-1: configuration #1 chosen from 1 choice
[    1.191643] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
[    1.191730] hub 2-1:1.0: usb_probe_interface
[    1.191736] hub 2-1:1.0: usb_probe_interface - got id
[    1.191743] hub 2-1:1.0: USB hub found
[    1.191852] hub 2-1:1.0: 6 ports detected
[    1.191870] hub 2-1:1.0: standalone hub
[    1.191874] hub 2-1:1.0: individual port power switching
[    1.191878] hub 2-1:1.0: individual port over-current protection
[    1.191882] hub 2-1:1.0: Single TT
[    1.191886] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns)
[    1.191891] hub 2-1:1.0: power on to power good time: 100ms
[    1.192151] hub 2-1:1.0: local power source is good
[    1.192650] hub 2-1:1.0: enabling power on all ports
[    1.193620] hub 1-1:1.0: state 7 ports 6 chg 0014 evt 0000
[    1.193749] hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s
[    1.262864] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
[    1.291207] hub 2-1:1.0: port 5: status 0101 change 0001
[    1.357560] usb 1-1.2: skipped 1 descriptor after interface
[    1.358160] usb 1-1.2: default language 0x0409
[    1.360909] usb 1-1.2: udev 3, busnum 1, minor = 2
[    1.360920] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c00e
[    1.360933] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.360944] usb 1-1.2: Product: USB-PS/2 Optical Mouse
[    1.360952] usb 1-1.2: Manufacturer: Logitech
[    1.361309] usb 1-1.2: usb_probe_device
[    1.361320] usb 1-1.2: configuration #1 chosen from 1 choice
[    1.361965] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0)
[    1.362422] hub 1-1:1.0: port 4, status 0101, change 0000, 12 Mb/s
[    1.390518] tsc: Refined TSC clocksource calibration: 1596.375 MHz
[    1.390529] usb 2-1: link qh256-0001/ffff8801186d1340 start 1 [1/0 us]
[    1.390544] Switching to clocksource tsc
[    1.434600] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[    1.450506] ata4: SATA link down (SStatus 0 SControl 300)
[    1.672420] usb 1-1.4: skipped 1 descriptor after configuration
[    1.672431] usb 1-1.4: skipped 5 descriptors after interface
[    1.672438] usb 1-1.4: skipped 1 descriptor after endpoint
[    1.672443] usb 1-1.4: skipped 23 descriptors after interface
[    1.674825] usb 1-1.4: default language 0x0409
[    1.687194] usb 1-1.4: udev 4, busnum 1, minor = 3
[    1.687205] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1018
[    1.687218] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.687229] usb 1-1.4: Product: WebCam SC-13HDL11431N
[    1.687237] usb 1-1.4: Manufacturer: 123
[    1.687598] usb 1-1.4: usb_probe_device
[    1.687608] usb 1-1.4: configuration #1 chosen from 1 choice
[    1.687802] usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0)
[    1.770327] ata5: SATA link down (SStatus 0 SControl 300)
[    1.773201] Freeing unused kernel memory: 1316k freed
[    1.773634] Write protecting the kernel read-only data: 12288k
[    1.781007] Freeing unused kernel memory: 1140k freed
[    1.787077] Freeing unused kernel memory: 1028k freed
[    1.844465] udevd[120]: starting version 175
[    1.860013] usb 1-1.4: adding 1-1.4:1.1 (config #1, interface 1)
[    1.860240] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0004
[    1.860363] hub 2-1:1.0: state 7 ports 6 chg 0020 evt 0000
[    1.860489] hub 2-1:1.0: port 5, status 0101, change 0000, 12 Mb/s
[    1.930186] usb 2-1.5: new full-speed USB device number 3 using ehci-pci
[    1.983469] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.983842] r8169 0000:02:00.0: irq 47 for MSI/MSI-X
[    1.984266] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000620000, e8:03:9a:36:17:a9, XID 0c900800 IRQ 47
[    1.984277] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.991191] hidraw: raw HID events driver (C) Jiri Kosina
[    1.994329] usbhid 1-1.2:1.0: usb_probe_interface
[    1.994336] usbhid 1-1.2:1.0: usb_probe_interface - got id
[    1.997922] usbcore: registered new interface driver usbhid
[    1.997929] usbhid: USB HID core driver
[    2.026363] usb 2-1.5: udev 3, busnum 2, minor = 130
[    2.026371] usb 2-1.5: New USB device found, idVendor=8086, idProduct=0189
[    2.026380] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.026595] usb 2-1.5: usb_probe_device
[    2.026599] usb 2-1.5: configuration #1 chosen from 1 choice
[    2.027137] usb 2-1.5: adding 2-1.5:1.0 (config #1, interface 0)
[    2.027491] usb 2-1.5: adding 2-1.5:1.1 (config #1, interface 1)
[    2.050226] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4
[    2.050472] hid-generic 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.2/input0
[    2.813984] EXT4-fs (loop0): INFO: recovery required on readonly filesystem
[    2.813994] EXT4-fs (loop0): write access will be enabled during recovery
[    3.728298] EXT4-fs (loop0): orphan cleanup on readonly fs
[    3.754843] EXT4-fs (loop0): ext4_orphan_cleanup: deleting unreferenced inode 528863
[    3.765517] EXT4-fs (loop0): ext4_orphan_cleanup: deleting unreferenced inode 402075
[    3.784134] EXT4-fs (loop0): 2 orphan inodes deleted
[    3.784141] EXT4-fs (loop0): recovery complete
[    3.971916] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[   27.203606] Adding 262140k swap on /host/ubuntu/disks/swap.disk.  Priority:-1 extents:1 across:262140k FS
[   27.268301] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro
[   27.281492] udevd[592]: starting version 175
[   27.430528] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251)
[   27.430539] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   27.430545] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[   27.430551] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   27.430554] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[   27.430560] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   27.430563] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[   27.430568] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   27.430571] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   27.480812] lp: driver loaded but no devices found
[   27.742518] wmi: Mapper loaded
[   27.888318] [drm] Initialized drm 1.1.0 20060810
[   27.928259] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
[   27.929278] samsung_laptop: detected SABI interface: SwSmi@
[   27.929283] samsung_laptop: Backlight controlled by ACPI video driver
[   27.938356] Bluetooth: Core ver 2.16
[   27.938415] NET: Registered protocol family 31
[   27.938418] Bluetooth: HCI device and connection manager initialized
[   27.938866] Bluetooth: HCI socket layer initialized
[   27.938879] Bluetooth: L2CAP socket layer initialized
[   27.938909] Bluetooth: SCO socket layer initialized
[   27.945713] cfg80211: Calling CRDA to update world regulatory domain
[   27.957728] Linux video capture interface: v2.00
[   27.986714] cfg80211: World regulatory domain updated:
[   27.986720] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   27.986724] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   27.986727] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   27.986730] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   27.986732] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   27.986734] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   27.990477] btusb 2-1.5:1.0: usb_probe_interface
[   27.990484] btusb 2-1.5:1.0: usb_probe_interface - got id
[   27.992574] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
[   27.994136] usbcore: registered new interface driver btusb
[   27.995666] usb 2-1.5: link qh1-0e01/ffff88011340dcc0 start 0 [1/2 us]
[   27.997921] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28
[   28.002322] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28
[   28.004911] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[   28.133222] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   28.133226] Bluetooth: BNEP filters: protocol multicast
[   28.133241] Bluetooth: BNEP socket layer initialized
[   28.188493] Bluetooth: RFCOMM TTY layer initialized
[   28.188522] Bluetooth: RFCOMM socket layer initialized
[   28.188525] Bluetooth: RFCOMM ver 1.11
[   28.294232] Intel(R) Wireless WiFi driver for Linux, in-tree:d
[   28.294237] Copyright(c) 2003-2013 Intel Corporation
[   28.294556] iwlwifi 0000:01:00.0: irq 48 for MSI/MSI-X
[   28.295420] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[   28.424228] ppdev: user-space parallel port driver
[   28.641249] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00)
[   28.657402] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c.
[   28.735982] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5
[   28.837001] uvcvideo 1-1.4:1.0: usb_probe_interface
[   28.837008] uvcvideo 1-1.4:1.0: usb_probe_interface - got id
[   28.837057] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11431N (2232:1018)
[   28.856611] input: WebCam SC-13HDL11431N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input6
[   28.857039] usbcore: registered new interface driver uvcvideo
[   28.857043] USB Video Class driver (1.1.1)
[   28.859857] usb 1-1.4: link qh16-0001/ffff88008ece4440 start 2 [1/0 us]
[   28.859911] usb 1-1.4: unlink qh16-0001/ffff88008ece4440 start 2 [1/0 us]
[   28.967177] type=1400 audit(1367000451.980:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=901 comm="apparmor_parser"
[   28.967282] type=1400 audit(1367000451.980:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=864 comm="apparmor_parser"
[   28.968031] type=1400 audit(1367000451.980:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=901 comm="apparmor_parser"
[   28.968140] type=1400 audit(1367000451.980:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=864 comm="apparmor_parser"
[   28.968573] type=1400 audit(1367000451.980:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=901 comm="apparmor_parser"
[   28.968863] type=1400 audit(1367000451.980:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=864 comm="apparmor_parser"
[   29.013812] type=1400 audit(1367000452.024:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=950 comm="apparmor_parser"
[   29.014858] type=1400 audit(1367000452.024:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=950 comm="apparmor_parser"
[   29.070614] [drm] Memory usable by graphics device = 2048M
[   29.070626] i915 0000:00:02.0: setting latency timer to 64
[   29.103552] i915 0000:00:02.0: irq 49 for MSI/MSI-X
[   29.103567] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   29.103569] [drm] Driver supports precise vblank timestamp query.
[   29.103741] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   29.114789] [drm] Wrong MCH_SSKPD value: 0x16040307
[   29.114794] [drm] This can cause pipe underruns and display issues.
[   29.114796] [drm] Please upgrade your BIOS to fix this.
[   29.129048] fbcon: inteldrmfb (fb0) is primary device
[   29.274672] init: failsafe main process (966) killed by TERM signal
[   29.642099] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG enabled
[   29.642101] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[   29.642103] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[   29.642104] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
[   29.642105] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_P2P disabled
[   29.642108] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0
[   29.642161] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[   29.657019] type=1400 audit(1367000452.668:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1093 comm="apparmor_parser"
[   29.657923] type=1400 audit(1367000452.668:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1093 comm="apparmor_parser"
[   29.699767] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   29.718116] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[   29.724733] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[   30.098423] Console: switching to colour frame buffer device 170x48
[   30.101019] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   30.101021] i915 0000:00:02.0: registered panic notifier
[   30.107360] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[   30.113995] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[   30.116893] acpi device:33: registered as cooling_device9
[   30.117384] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   30.117496] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[   30.117682] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   30.119974] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[   30.155268] init: alsa-restore main process (1158) terminated with status 19
[   30.176941] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   30.177423] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   30.177788] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   30.320746] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   30.472473] usb 1-1.2: link qh8-0e01/ffff88008ecd0b40 start 3 [1/2 us]
[   30.802084] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   30.808642] init: plymouth-stop pre-start process (1431) terminated with status 1
[   30.857871] usb 1-1.4: usb auto-suspend, wakeup 0
[   32.323212] usb usb4: usb auto-resume
[   32.323229] hub 4-0:1.0: hub_resume
[   32.323255] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.323285] hub 4-0:1.0: hub_suspend
[   32.323290] usb usb4: bus auto-suspend, wakeup 1
[   32.323332] usb usb4: usb auto-resume
[   32.332609] hub 4-0:1.0: hub_resume
[   32.332634] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.332671] hub 4-0:1.0: hub_suspend
[   32.332678] usb usb4: bus auto-suspend, wakeup 1
[   32.332689] usb usb3: usb auto-resume
[   32.332706] hub 3-0:1.0: hub_resume
[   32.332731] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.332740] hub 3-0:1.0: hub_suspend
[   32.332745] usb usb3: bus auto-suspend, wakeup 1
[   32.332779] usb usb3: usb auto-resume
[   32.344611] hub 3-0:1.0: hub_resume
[   32.344637] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.344651] hub 3-0:1.0: hub_suspend
[   32.344658] usb usb3: bus auto-suspend, wakeup 1
[   32.345183] usb 1-1.4: usb auto-resume
[   32.392677] usb 1-1.4: finish resume
[   32.399163] usb usb4: usb auto-resume
[   32.399181] hub 4-0:1.0: hub_resume
[   32.399213] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.399255] hub 4-0:1.0: hub_suspend
[   32.399262] usb usb4: bus auto-suspend, wakeup 1
[   32.399315] usb usb4: usb auto-resume
[   32.408577] hub 4-0:1.0: hub_resume
[   32.408603] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.408652] hub 4-0:1.0: hub_suspend
[   32.408659] usb usb4: bus auto-suspend, wakeup 1
[   32.408674] usb usb3: usb auto-resume
[   32.408691] hub 3-0:1.0: hub_resume
[   32.408707] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.408730] hub 3-0:1.0: hub_suspend
[   32.408734] usb usb3: bus auto-suspend, wakeup 1
[   32.408783] usb usb3: usb auto-resume
[   32.420616] hub 3-0:1.0: hub_resume
[   32.420650] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.420677] hub 3-0:1.0: hub_suspend
[   32.420685] usb usb3: bus auto-suspend, wakeup 1
[   32.422182] usb usb4: usb auto-resume
[   32.422200] hub 4-0:1.0: hub_resume
[   32.422228] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.422272] hub 4-0:1.0: hub_suspend
[   32.422279] usb usb4: bus auto-suspend, wakeup 1
[   32.422344] usb usb4: usb auto-resume
[   32.432591] hub 4-0:1.0: hub_resume
[   32.432658] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.432695] hub 4-0:1.0: hub_suspend
[   32.432701] usb usb4: bus auto-suspend, wakeup 1
[   32.432737] usb usb3: usb auto-resume
[   32.432758] hub 3-0:1.0: hub_resume
[   32.432795] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.432804] hub 3-0:1.0: hub_suspend
[   32.432808] usb usb3: bus auto-suspend, wakeup 1
[   32.432846] usb usb3: usb auto-resume
[   32.444539] hub 3-0:1.0: hub_resume
[   32.444569] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.444605] hub 3-0:1.0: hub_suspend
[   32.444613] usb usb3: bus auto-suspend, wakeup 1
[   32.450331] usb usb4: usb auto-resume
[   32.450348] hub 4-0:1.0: hub_resume
[   32.450374] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.450427] hub 4-0:1.0: hub_suspend
[   32.450435] usb usb4: bus auto-suspend, wakeup 1
[   32.450462] usb usb4: usb auto-resume
[   32.460654] hub 4-0:1.0: hub_resume
[   32.460698] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.460733] hub 4-0:1.0: hub_suspend
[   32.460738] usb usb4: bus auto-suspend, wakeup 1
[   32.460779] usb usb3: usb auto-resume
[   32.460805] hub 3-0:1.0: hub_resume
[   32.460835] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.460861] hub 3-0:1.0: hub_suspend
[   32.460867] usb usb3: bus auto-suspend, wakeup 1
[   32.460937] usb usb3: usb auto-resume
[   32.472520] hub 3-0:1.0: hub_resume
[   32.472554] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.472585] hub 3-0:1.0: hub_suspend
[   32.472593] usb usb3: bus auto-suspend, wakeup 1
[   32.484557] usb usb4: usb auto-resume
[   32.484574] hub 4-0:1.0: hub_resume
[   32.484598] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.484635] hub 4-0:1.0: hub_suspend
[   32.484640] usb usb4: bus auto-suspend, wakeup 1
[   32.484684] usb usb4: usb auto-resume
[   32.496517] hub 4-0:1.0: hub_resume
[   32.496563] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.496623] hub 4-0:1.0: hub_suspend
[   32.496628] usb usb4: bus auto-suspend, wakeup 1
[   32.496655] usb usb3: usb auto-resume
[   32.496671] hub 3-0:1.0: hub_resume
[   32.496687] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.496710] hub 3-0:1.0: hub_suspend
[   32.496713] usb usb3: bus auto-suspend, wakeup 1
[   32.496756] usb usb3: usb auto-resume
[   32.508550] hub 3-0:1.0: hub_resume
[   32.508594] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.508613] hub 3-0:1.0: hub_suspend
[   32.508619] usb usb3: bus auto-suspend, wakeup 1
[   32.510510] usb usb4: usb auto-resume
[   32.510523] hub 4-0:1.0: hub_resume
[   32.510544] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.510572] hub 4-0:1.0: hub_suspend
[   32.510575] usb usb4: bus auto-suspend, wakeup 1
[   32.510616] usb usb4: usb auto-resume
[   32.520546] hub 4-0:1.0: hub_resume
[   32.520599] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.520632] hub 4-0:1.0: hub_suspend
[   32.520636] usb usb4: bus auto-suspend, wakeup 1
[   32.520690] usb usb3: usb auto-resume
[   32.520705] hub 3-0:1.0: hub_resume
[   32.520720] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.520743] hub 3-0:1.0: hub_suspend
[   32.520746] usb usb3: bus auto-suspend, wakeup 1
[   32.520787] usb usb3: usb auto-resume
[   32.532525] hub 3-0:1.0: hub_resume
[   32.532570] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.532594] hub 3-0:1.0: hub_suspend
[   32.532600] usb usb3: bus auto-suspend, wakeup 1
[   32.533402] usb usb4: usb auto-resume
[   32.533416] hub 4-0:1.0: hub_resume
[   32.533436] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.533463] hub 4-0:1.0: hub_suspend
[   32.533467] usb usb4: bus auto-suspend, wakeup 1
[   32.533507] usb usb4: usb auto-resume
[   32.544510] hub 4-0:1.0: hub_resume
[   32.544578] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.544610] hub 4-0:1.0: hub_suspend
[   32.544615] usb usb4: bus auto-suspend, wakeup 1
[   32.544642] usb usb3: usb auto-resume
[   32.544658] hub 3-0:1.0: hub_resume
[   32.544673] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.544694] hub 3-0:1.0: hub_suspend
[   32.544698] usb usb3: bus auto-suspend, wakeup 1
[   32.544739] usb usb3: usb auto-resume
[   32.556496] hub 3-0:1.0: hub_resume
[   32.556599] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.556633] hub 3-0:1.0: hub_suspend
[   32.556645] usb usb3: bus auto-suspend, wakeup 1
[   32.562832] usb usb4: usb auto-resume
[   32.562848] hub 4-0:1.0: hub_resume
[   32.562889] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.562932] hub 4-0:1.0: hub_suspend
[   32.562937] usb usb4: bus auto-suspend, wakeup 1
[   32.562973] usb usb4: usb auto-resume
[   32.572494] hub 4-0:1.0: hub_resume
[   32.572666] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.572686] usb usb3: usb auto-resume
[   32.572709] hub 3-0:1.0: hub_resume
[   32.572744] hub 4-0:1.0: hub_suspend
[   32.572750] usb usb4: bus auto-suspend, wakeup 1
[   32.572753] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.572773] hub 3-0:1.0: hub_suspend
[   32.572777] usb usb3: bus auto-suspend, wakeup 1
[   32.572880] usb usb3: usb auto-resume
[   32.584490] hub 3-0:1.0: hub_resume
[   32.584590] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.584628] hub 3-0:1.0: hub_suspend
[   32.584641] usb usb3: bus auto-suspend, wakeup 1
[   32.586290] usb usb4: usb auto-resume
[   32.586311] hub 4-0:1.0: hub_resume
[   32.586362] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.586414] hub 4-0:1.0: hub_suspend
[   32.586423] usb usb4: bus auto-suspend, wakeup 1
[   32.586471] usb usb4: usb auto-resume
[   32.596477] hub 4-0:1.0: hub_resume
[   32.596532] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.596588] hub 4-0:1.0: hub_suspend
[   32.596597] usb usb4: bus auto-suspend, wakeup 1
[   32.596661] usb usb3: usb auto-resume
[   32.596683] hub 3-0:1.0: hub_resume
[   32.596727] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.596762] hub 3-0:1.0: hub_suspend
[   32.596770] usb usb3: bus auto-suspend, wakeup 1
[   32.596821] usb usb3: usb auto-resume
[   32.608482] hub 3-0:1.0: hub_resume
[   32.608544] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.608565] hub 3-0:1.0: hub_suspend
[   32.608573] usb usb3: bus auto-suspend, wakeup 1
[   32.612534] usb usb4: usb auto-resume
[   32.612562] hub 4-0:1.0: hub_resume
[   32.612589] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.612634] hub 4-0:1.0: hub_suspend
[   32.612642] usb usb4: bus auto-suspend, wakeup 1
[   32.612700] usb usb4: usb auto-resume
[   32.624431] hub 4-0:1.0: hub_resume
[   32.624654] usb usb3: usb auto-resume
[   32.624672] hub 3-0:1.0: hub_resume
[   32.628428] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.628443] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   32.628481] hub 4-0:1.0: hub_suspend
[   32.628488] usb usb4: bus auto-suspend, wakeup 1
[   32.628503] hub 3-0:1.0: hub_suspend
[   32.628507] usb usb3: bus auto-suspend, wakeup 1
[   33.634939] usb usb4: usb auto-resume
[   33.634967] hub 4-0:1.0: hub_resume
[   33.635077] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.635151] hub 4-0:1.0: hub_suspend
[   33.635165] usb usb4: bus auto-suspend, wakeup 1
[   33.635254] usb usb4: usb auto-resume
[   33.643730] hub 4-0:1.0: hub_resume
[   33.643804] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.643882] hub 4-0:1.0: hub_suspend
[   33.643898] usb usb4: bus auto-suspend, wakeup 1
[   33.643944] usb usb3: usb auto-resume
[   33.643971] hub 3-0:1.0: hub_resume
[   33.644012] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.644029] hub 3-0:1.0: hub_suspend
[   33.644040] usb usb3: bus auto-suspend, wakeup 1
[   33.644151] usb usb3: usb auto-resume
[   33.655728] hub 3-0:1.0: hub_resume
[   33.655843] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.655883] hub 3-0:1.0: hub_suspend
[   33.655898] usb usb3: bus auto-suspend, wakeup 1
[   33.660171] usb usb4: usb auto-resume
[   33.660196] hub 4-0:1.0: hub_resume
[   33.660301] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.660411] hub 4-0:1.0: hub_suspend
[   33.660426] usb usb4: bus auto-suspend, wakeup 1
[   33.660519] usb usb4: usb auto-resume
[   33.671774] hub 4-0:1.0: hub_resume
[   33.671883] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.671955] hub 4-0:1.0: hub_suspend
[   33.671970] usb usb4: bus auto-suspend, wakeup 1
[   33.672008] usb usb3: usb auto-resume
[   33.672032] hub 3-0:1.0: hub_resume
[   33.672118] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.672155] hub 3-0:1.0: hub_suspend
[   33.672168] usb usb3: bus auto-suspend, wakeup 1
[   33.672210] usb usb3: usb auto-resume
[   33.683830] hub 3-0:1.0: hub_resume
[   33.683940] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.683980] hub 3-0:1.0: hub_suspend
[   33.683994] usb usb3: bus auto-suspend, wakeup 1
[   33.686128] usb usb4: usb auto-resume
[   33.686151] hub 4-0:1.0: hub_resume
[   33.686242] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.686314] hub 4-0:1.0: hub_suspend
[   33.686327] usb usb4: bus auto-suspend, wakeup 1
[   33.686412] usb usb4: usb auto-resume
[   33.695682] hub 4-0:1.0: hub_resume
[   33.695800] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.695870] hub 4-0:1.0: hub_suspend
[   33.695882] usb usb4: bus auto-suspend, wakeup 1
[   33.695975] usb usb3: usb auto-resume
[   33.696003] hub 3-0:1.0: hub_resume
[   33.696096] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.696131] hub 3-0:1.0: hub_suspend
[   33.696144] usb usb3: bus auto-suspend, wakeup 1
[   33.696209] usb usb3: usb auto-resume
[   33.707700] hub 3-0:1.0: hub_resume
[   33.707778] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.707815] hub 3-0:1.0: hub_suspend
[   33.707829] usb usb3: bus auto-suspend, wakeup 1
[   33.727138] usb usb4: usb auto-resume
[   33.727167] hub 4-0:1.0: hub_resume
[   33.727284] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.727369] hub 4-0:1.0: hub_suspend
[   33.727386] usb usb4: bus auto-suspend, wakeup 1
[   33.727431] usb usb4: usb auto-resume
[   33.735731] hub 4-0:1.0: hub_resume
[   33.735788] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.735835] hub 4-0:1.0: hub_suspend
[   33.735844] usb usb4: bus auto-suspend, wakeup 1
[   33.735871] usb usb3: usb auto-resume
[   33.735890] hub 3-0:1.0: hub_resume
[   33.735926] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.735939] hub 3-0:1.0: hub_suspend
[   33.735944] usb usb3: bus auto-suspend, wakeup 1
[   33.735969] usb usb3: usb auto-resume
[   33.747660] hub 3-0:1.0: hub_resume
[   33.747739] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.747806] hub 3-0:1.0: hub_suspend
[   33.747823] usb usb3: bus auto-suspend, wakeup 1
[   33.749750] usb usb4: usb auto-resume
[   33.749774] hub 4-0:1.0: hub_resume
[   33.749869] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.749939] hub 4-0:1.0: hub_suspend
[   33.749951] usb usb4: bus auto-suspend, wakeup 1
[   33.750039] usb usb4: usb auto-resume
[   33.759708] hub 4-0:1.0: hub_resume
[   33.759780] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.759854] hub 4-0:1.0: hub_suspend
[   33.759866] usb usb4: bus auto-suspend, wakeup 1
[   33.760018] usb usb3: usb auto-resume
[   33.760039] hub 3-0:1.0: hub_resume
[   33.760076] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.760144] hub 3-0:1.0: hub_suspend
[   33.760153] usb usb3: bus auto-suspend, wakeup 1
[   33.760256] usb usb3: usb auto-resume
[   33.771640] hub 3-0:1.0: hub_resume
[   33.771709] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.771760] hub 3-0:1.0: hub_suspend
[   33.771776] usb usb3: bus auto-suspend, wakeup 1
[   33.774328] usb usb4: usb auto-resume
[   33.774350] hub 4-0:1.0: hub_resume
[   33.774401] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.774448] hub 4-0:1.0: hub_suspend
[   33.774458] usb usb4: bus auto-suspend, wakeup 1
[   33.774587] usb usb4: usb auto-resume
[   33.783633] hub 4-0:1.0: hub_resume
[   33.783703] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.783792] hub 4-0:1.0: hub_suspend
[   33.783808] usb usb4: bus auto-suspend, wakeup 1
[   33.783907] usb usb3: usb auto-resume
[   33.783931] hub 3-0:1.0: hub_resume
[   33.783970] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.784039] hub 3-0:1.0: hub_suspend
[   33.784049] usb usb3: bus auto-suspend, wakeup 1
[   33.784158] usb usb3: usb auto-resume
[   33.795641] hub 3-0:1.0: hub_resume
[   33.795705] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.795733] hub 3-0:1.0: hub_suspend
[   33.795749] usb usb3: bus auto-suspend, wakeup 1
[   33.798646] usb usb4: usb auto-resume
[   33.798674] hub 4-0:1.0: hub_resume
[   33.798789] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.798864] hub 4-0:1.0: hub_suspend
[   33.798878] usb usb4: bus auto-suspend, wakeup 1
[   33.798935] usb usb4: usb auto-resume
[   33.807618] hub 4-0:1.0: hub_resume
[   33.807730] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.807801] hub 4-0:1.0: hub_suspend
[   33.807814] usb usb4: bus auto-suspend, wakeup 1
[   33.807890] usb usb3: usb auto-resume
[   33.807918] hub 3-0:1.0: hub_resume
[   33.808012] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.808048] hub 3-0:1.0: hub_suspend
[   33.808061] usb usb3: bus auto-suspend, wakeup 1
[   33.808134] usb usb3: usb auto-resume
[   33.819614] hub 3-0:1.0: hub_resume
[   33.819699] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.819732] hub 3-0:1.0: hub_suspend
[   33.819745] usb usb3: bus auto-suspend, wakeup 1
[   33.826463] usb usb4: usb auto-resume
[   33.826492] hub 4-0:1.0: hub_resume
[   33.826558] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.826681] hub 4-0:1.0: hub_suspend
[   33.826700] usb usb4: bus auto-suspend, wakeup 1
[   33.826854] usb usb4: usb auto-resume
[   33.835610] hub 4-0:1.0: hub_resume
[   33.835713] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.835787] hub 4-0:1.0: hub_suspend
[   33.835801] usb usb4: bus auto-suspend, wakeup 1
[   33.835825] usb usb3: usb auto-resume
[   33.835849] hub 3-0:1.0: hub_resume
[   33.835931] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.835969] hub 3-0:1.0: hub_suspend
[   33.835983] usb usb3: bus auto-suspend, wakeup 1
[   33.836042] usb usb3: usb auto-resume
[   33.847589] hub 3-0:1.0: hub_resume
[   33.847693] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.847731] hub 3-0:1.0: hub_suspend
[   33.847744] usb usb3: bus auto-suspend, wakeup 1
[   33.853545] usb usb4: usb auto-resume
[   33.853568] hub 4-0:1.0: hub_resume
[   33.853657] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.853725] hub 4-0:1.0: hub_suspend
[   33.853738] usb usb4: bus auto-suspend, wakeup 1
[   33.853790] usb usb4: usb auto-resume
[   33.863566] hub 4-0:1.0: hub_resume
[   33.863670] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.863737] hub 4-0:1.0: hub_suspend
[   33.863749] usb usb4: bus auto-suspend, wakeup 1
[   33.863754] usb usb3: usb auto-resume
[   33.863780] hub 3-0:1.0: hub_resume
[   33.863824] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.863844] hub 3-0:1.0: hub_suspend
[   33.863853] usb usb3: bus auto-suspend, wakeup 1
[   33.863906] usb usb3: usb auto-resume
[   33.875562] hub 3-0:1.0: hub_resume
[   33.875659] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.875695] hub 3-0:1.0: hub_suspend
[   33.875708] usb usb3: bus auto-suspend, wakeup 1
[   33.877122] usb usb4: usb auto-resume
[   33.877141] hub 4-0:1.0: hub_resume
[   33.877226] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.877293] hub 4-0:1.0: hub_suspend
[   33.877305] usb usb4: bus auto-suspend, wakeup 1
[   33.877388] usb usb4: usb auto-resume
[   33.887547] hub 4-0:1.0: hub_resume
[   33.887615] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.887676] hub 4-0:1.0: hub_suspend
[   33.887688] usb usb4: bus auto-suspend, wakeup 1
[   33.887734] usb usb3: usb auto-resume
[   33.887757] hub 3-0:1.0: hub_resume
[   33.887836] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.887872] hub 3-0:1.0: hub_suspend
[   33.887885] usb usb3: bus auto-suspend, wakeup 1
[   33.887943] usb usb3: usb auto-resume
[   33.899542] hub 3-0:1.0: hub_resume
[   33.899607] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.899638] hub 3-0:1.0: hub_suspend
[   33.899651] usb usb3: bus auto-suspend, wakeup 1
[   33.908149] usb usb4: usb auto-resume
[   33.908173] hub 4-0:1.0: hub_resume
[   33.908273] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.908343] hub 4-0:1.0: hub_suspend
[   33.908355] usb usb4: bus auto-suspend, wakeup 1
[   33.908439] usb usb4: usb auto-resume
[   33.919529] hub 4-0:1.0: hub_resume
[   33.919631] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.919698] hub 4-0:1.0: hub_suspend
[   33.919710] usb usb4: bus auto-suspend, wakeup 1
[   33.919720] usb usb3: usb auto-resume
[   33.919743] hub 3-0:1.0: hub_resume
[   33.919788] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.919809] hub 3-0:1.0: hub_suspend
[   33.919817] usb usb3: bus auto-suspend, wakeup 1
[   33.919870] usb usb3: usb auto-resume
[   33.931535] hub 3-0:1.0: hub_resume
[   33.931634] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.931671] hub 3-0:1.0: hub_suspend
[   33.931684] usb usb3: bus auto-suspend, wakeup 1
[   33.933570] usb usb4: usb auto-resume
[   33.933590] hub 4-0:1.0: hub_resume
[   33.933676] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.933743] hub 4-0:1.0: hub_suspend
[   33.933755] usb usb4: bus auto-suspend, wakeup 1
[   33.933840] usb usb4: usb auto-resume
[   33.943515] hub 4-0:1.0: hub_resume
[   33.943616] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.943683] hub 4-0:1.0: hub_suspend
[   33.943695] usb usb4: bus auto-suspend, wakeup 1
[   33.943702] usb usb3: usb auto-resume
[   33.943725] hub 3-0:1.0: hub_resume
[   33.943773] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.943793] hub 3-0:1.0: hub_suspend
[   33.943801] usb usb3: bus auto-suspend, wakeup 1
[   33.943851] usb usb3: usb auto-resume
[   33.955510] hub 3-0:1.0: hub_resume
[   33.955610] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.955646] hub 3-0:1.0: hub_suspend
[   33.955659] usb usb3: bus auto-suspend, wakeup 1
[   33.957538] usb usb4: usb auto-resume
[   33.957558] hub 4-0:1.0: hub_resume
[   33.957643] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.957710] hub 4-0:1.0: hub_suspend
[   33.957722] usb usb4: bus auto-suspend, wakeup 1
[   33.957810] usb usb4: usb auto-resume
[   33.967497] hub 4-0:1.0: hub_resume
[   33.967598] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.967664] hub 4-0:1.0: hub_suspend
[   33.967676] usb usb4: bus auto-suspend, wakeup 1
[   33.967685] usb usb3: usb auto-resume
[   33.967708] hub 3-0:1.0: hub_resume
[   33.967754] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.967774] hub 3-0:1.0: hub_suspend
[   33.967782] usb usb3: bus auto-suspend, wakeup 1
[   33.967834] usb usb3: usb auto-resume
[   33.979494] hub 3-0:1.0: hub_resume
[   33.979594] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.979631] hub 3-0:1.0: hub_suspend
[   33.979644] usb usb3: bus auto-suspend, wakeup 1
[   33.982565] usb usb4: usb auto-resume
[   33.982589] hub 4-0:1.0: hub_resume
[   33.982652] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.982752] hub 4-0:1.0: hub_suspend
[   33.982767] usb usb4: bus auto-suspend, wakeup 1
[   33.982916] usb usb4: usb auto-resume
[   33.991475] hub 4-0:1.0: hub_resume
[   33.991534] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.991622] hub 4-0:1.0: hub_suspend
[   33.991636] usb usb4: bus auto-suspend, wakeup 1
[   33.991785] usb usb3: usb auto-resume
[   33.991805] hub 3-0:1.0: hub_resume
[   33.991843] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   33.991885] hub 3-0:1.0: hub_suspend
[   33.991895] usb usb3: bus auto-suspend, wakeup 1
[   33.991996] usb usb3: usb auto-resume
[   34.003487] hub 3-0:1.0: hub_resume
[   34.004060] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.004100] hub 3-0:1.0: hub_suspend
[   34.004117] usb usb3: bus auto-suspend, wakeup 1
[   34.006450] usb usb4: usb auto-resume
[   34.006473] hub 4-0:1.0: hub_resume
[   34.006526] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.006602] hub 4-0:1.0: hub_suspend
[   34.006618] usb usb4: bus auto-suspend, wakeup 1
[   34.006671] usb usb4: usb auto-resume
[   34.015447] hub 4-0:1.0: hub_resume
[   34.015505] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.015585] hub 4-0:1.0: hub_suspend
[   34.015602] usb usb4: bus auto-suspend, wakeup 1
[   34.015639] usb usb3: usb auto-resume
[   34.015662] hub 3-0:1.0: hub_resume
[   34.015697] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.015714] hub 3-0:1.0: hub_suspend
[   34.015724] usb usb3: bus auto-suspend, wakeup 1
[   34.015821] usb usb3: usb auto-resume
[   34.027448] hub 3-0:1.0: hub_resume
[   34.027515] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.027583] hub 3-0:1.0: hub_suspend
[   34.027602] usb usb3: bus auto-suspend, wakeup 1
[   34.032194] usb usb4: usb auto-resume
[   34.032221] hub 4-0:1.0: hub_resume
[   34.032288] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.032338] hub 4-0:1.0: hub_suspend
[   34.032354] usb usb4: bus auto-suspend, wakeup 1
[   34.032489] usb usb4: usb auto-resume
[   34.043459] hub 4-0:1.0: hub_resume
[   34.043509] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.043575] hub 4-0:1.0: hub_suspend
[   34.043587] usb usb4: bus auto-suspend, wakeup 1
[   34.043728] usb usb3: usb auto-resume
[   34.043749] hub 3-0:1.0: hub_resume
[   34.043785] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.043834] hub 3-0:1.0: hub_suspend
[   34.043843] usb usb3: bus auto-suspend, wakeup 1
[   34.043945] usb usb3: usb auto-resume
[   34.055425] hub 3-0:1.0: hub_resume
[   34.055473] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.055512] hub 3-0:1.0: hub_suspend
[   34.055523] usb usb3: bus auto-suspend, wakeup 1
[   34.060764] usb usb4: usb auto-resume
[   34.060787] hub 4-0:1.0: hub_resume
[   34.060835] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.060922] hub 4-0:1.0: hub_suspend
[   34.060934] usb usb4: bus auto-suspend, wakeup 1
[   34.061031] usb usb4: usb auto-resume
[   34.071415] hub 4-0:1.0: hub_resume
[   34.071492] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.071552] hub 4-0:1.0: hub_suspend
[   34.071564] usb usb4: bus auto-suspend, wakeup 1
[   34.071680] usb usb3: usb auto-resume
[   34.071703] hub 3-0:1.0: hub_resume
[   34.071753] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.071790] hub 3-0:1.0: hub_suspend
[   34.071805] usb usb3: bus auto-suspend, wakeup 1
[   34.071840] usb usb3: usb auto-resume
[   34.083403] hub 3-0:1.0: hub_resume
[   34.083481] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.083510] hub 3-0:1.0: hub_suspend
[   34.083523] usb usb3: bus auto-suspend, wakeup 1
[   34.086565] usb usb4: usb auto-resume
[   34.086587] hub 4-0:1.0: hub_resume
[   34.086636] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.086726] hub 4-0:1.0: hub_suspend
[   34.086741] usb usb4: bus auto-suspend, wakeup 1
[   34.086798] usb usb4: usb auto-resume
[   34.095387] hub 4-0:1.0: hub_resume
[   34.095452] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.095551] hub 4-0:1.0: hub_suspend
[   34.095565] usb usb4: bus auto-suspend, wakeup 1
[   34.095656] usb usb3: usb auto-resume
[   34.095682] hub 3-0:1.0: hub_resume
[   34.095726] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.095794] hub 3-0:1.0: hub_suspend
[   34.095809] usb usb3: bus auto-suspend, wakeup 1
[   34.095967] usb usb3: usb auto-resume
[   34.107384] hub 3-0:1.0: hub_resume
[   34.107446] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.107477] hub 3-0:1.0: hub_suspend
[   34.107489] usb usb3: bus auto-suspend, wakeup 1
[   34.109928] usb usb4: usb auto-resume
[   34.109949] hub 4-0:1.0: hub_resume
[   34.110003] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.110052] hub 4-0:1.0: hub_suspend
[   34.110061] usb usb4: bus auto-suspend, wakeup 1
[   34.110082] usb usb4: usb auto-resume
[   34.119366] hub 4-0:1.0: hub_resume
[   34.119418] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.119480] hub 4-0:1.0: hub_suspend
[   34.119491] usb usb4: bus auto-suspend, wakeup 1
[   34.119525] usb usb3: usb auto-resume
[   34.119547] hub 3-0:1.0: hub_resume
[   34.119627] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.119664] hub 3-0:1.0: hub_suspend
[   34.119677] usb usb3: bus auto-suspend, wakeup 1
[   34.119732] usb usb3: usb auto-resume
[   34.131388] hub 3-0:1.0: hub_resume
[   34.131456] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.131489] hub 3-0:1.0: hub_suspend
[   34.131503] usb usb3: bus auto-suspend, wakeup 1
[   34.133844] usb usb4: usb auto-resume
[   34.133864] hub 4-0:1.0: hub_resume
[   34.133950] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.134016] hub 4-0:1.0: hub_suspend
[   34.134028] usb usb4: bus auto-suspend, wakeup 1
[   34.134110] usb usb4: usb auto-resume
[   34.143436] hub 4-0:1.0: hub_resume
[   34.143554] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.143625] hub 4-0:1.0: hub_suspend
[   34.143639] usb usb4: bus auto-suspend, wakeup 1
[   34.143675] usb usb3: usb auto-resume
[   34.143698] hub 3-0:1.0: hub_resume
[   34.143784] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.143820] hub 3-0:1.0: hub_suspend
[   34.143833] usb usb3: bus auto-suspend, wakeup 1
[   34.143889] usb usb3: usb auto-resume
[   34.155433] hub 3-0:1.0: hub_resume
[   34.155555] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.155595] hub 3-0:1.0: hub_suspend
[   34.155609] usb usb3: bus auto-suspend, wakeup 1
[   34.158694] usb usb4: usb auto-resume
[   34.158715] hub 4-0:1.0: hub_resume
[   34.158803] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.158872] hub 4-0:1.0: hub_suspend
[   34.158884] usb usb4: bus auto-suspend, wakeup 1
[   34.158972] usb usb4: usb auto-resume
[   34.167417] hub 4-0:1.0: hub_resume
[   34.167543] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.167615] hub 4-0:1.0: hub_suspend
[   34.167629] usb usb4: bus auto-suspend, wakeup 1
[   34.167665] usb usb3: usb auto-resume
[   34.167688] hub 3-0:1.0: hub_resume
[   34.167775] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.167811] hub 3-0:1.0: hub_suspend
[   34.167824] usb usb3: bus auto-suspend, wakeup 1
[   34.167881] usb usb3: usb auto-resume
[   34.179371] hub 3-0:1.0: hub_resume
[   34.179480] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   34.179520] hub 3-0:1.0: hub_suspend
[   34.179534] usb usb3: bus auto-suspend, wakeup 1
[   35.183319] usb usb4: usb auto-resume
[   35.183346] hub 4-0:1.0: hub_resume
[   35.183444] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   35.183517] hub 4-0:1.0: hub_suspend
[   35.183530] usb usb4: bus auto-suspend, wakeup 1
[   35.183613] usb usb4: usb auto-resume
[   35.194640] hub 4-0:1.0: hub_resume
[   35.194751] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   35.194824] hub 4-0:1.0: hub_suspend
[   35.194838] usb usb4: bus auto-suspend, wakeup 1
[   35.194868] usb usb3: usb auto-resume
[   35.194891] hub 3-0:1.0: hub_resume
[   35.194976] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   35.195012] hub 3-0:1.0: hub_suspend
[   35.195025] usb usb3: bus auto-suspend, wakeup 1
[   35.195081] usb usb3: usb auto-resume
[   35.206633] hub 3-0:1.0: hub_resume
[   35.206739] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   35.206779] hub 3-0:1.0: hub_suspend
[   35.206793] usb usb3: bus auto-suspend, wakeup 1
[   35.211506] usb usb4: usb auto-resume
[   35.211528] hub 4-0:1.0: hub_resume
[   35.211620] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   35.211689] hub 4-0:1.0: hub_suspend
[   35.211701] usb usb4: bus auto-suspend, wakeup 1
[   35.211782] usb usb4: usb auto-resume
[   35.222678] hub 4-0:1.0: hub_resume
[   35.222796] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   35.222879] hub 4-0:1.0: hub_suspend
[   35.222895] usb usb4: bus auto-suspend, wakeup 1
[   35.222942] usb usb3: usb auto-resume
[   35.222965] hub 3-0:1.0: hub_resume
[   35.223047] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   35.223083] hub 3-0:1.0: hub_suspend
[   35.223096] usb usb3: bus auto-suspend, wakeup 1
[   35.223139] usb usb3: usb auto-resume
[   35.234763] hub 3-0:1.0: hub_resume
[   35.234879] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   35.234920] hub 3-0:1.0: hub_suspend
[   35.234935] usb usb3: bus auto-suspend, wakeup 1
[   35.240298] usb usb4: usb auto-resume
[   35.240320] hub 4-0:1.0: hub_resume
[   35.240407] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   35.240477] hub 4-0:1.0: hub_suspend
[   35.240490] usb usb4: bus auto-suspend, wakeup 1
[   35.240576] usb usb4: usb auto-resume
[   35.250635] hub 4-0:1.0: hub_resume
[   35.250755] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   35.250837] hub 4-0:1.0: hub_suspend
[   35.250852] usb usb4: bus auto-suspend, wakeup 1
[   35.250903] usb usb3: usb auto-resume
[   35.250927] hub 3-0:1.0: hub_resume
[   35.251011] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   35.251047] hub 3-0:1.0: hub_suspend
[   35.251060] usb usb3: bus auto-suspend, wakeup 1
[   35.251101] usb usb3: usb auto-resume
[   35.262637] hub 3-0:1.0: hub_resume
[   35.262756] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   35.262806] hub 3-0:1.0: hub_suspend
[   35.262824] usb usb3: bus auto-suspend, wakeup 1
[   35.265158] usb usb4: usb auto-resume
[   35.265180] hub 4-0:1.0: hub_resume
[   35.265267] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   35.265336] hub 4-0:1.0: hub_suspend
[   35.265348] usb usb4: bus auto-suspend, wakeup 1
[   35.265428] usb usb4: usb auto-resume
[   35.274623] hub 4-0:1.0: hub_resume
[   35.274743] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   35.274826] hub 4-0:1.0: hub_suspend
[   35.274841] usb usb4: bus auto-suspend, wakeup 1
[   35.274896] usb usb3: usb auto-resume
[   35.274920] hub 3-0:1.0: hub_resume
[   35.275004] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   35.275040] hub 3-0:1.0: hub_suspend
[   35.275053] usb usb3: bus auto-suspend, wakeup 1
[   35.275092] usb usb3: usb auto-resume
[   35.286584] hub 3-0:1.0: hub_resume
[   35.286692] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   35.286732] hub 3-0:1.0: hub_suspend
[   35.286746] usb usb3: bus auto-suspend, wakeup 1
[   35.290283] usb usb4: usb auto-resume
[   35.290305] hub 4-0:1.0: hub_resume
[   35.290392] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   35.290461] hub 4-0:1.0: hub_suspend
[   35.290474] usb usb4: bus auto-suspend, wakeup 1
[   35.290548] usb usb4: usb auto-resume
[   35.302561] hub 4-0:1.0: hub_resume
[   35.302666] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   35.302733] hub 4-0:1.0: hub_suspend
[   35.302745] usb usb4: bus auto-suspend, wakeup 1
[   35.302755] usb usb3: usb auto-resume
[   35.302777] hub 3-0:1.0: hub_resume
[   35.302824] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   35.302844] hub 3-0:1.0: hub_suspend
[   35.302853] usb usb3: bus auto-suspend, wakeup 1
[   35.302903] usb usb3: usb auto-resume
[   35.314589] hub 3-0:1.0: hub_resume
[   35.314714] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   35.314762] hub 3-0:1.0: hub_suspend
[   35.314781] usb usb3: bus auto-suspend, wakeup 1
[   35.321010] usb usb4: usb auto-resume
[   35.321032] hub 4-0:1.0: hub_resume
[   35.321123] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   35.321193] hub 4-0:1.0: hub_suspend
[   35.321205] usb usb4: bus auto-suspend, wakeup 1
[   35.321288] usb usb4: usb auto-resume
[   35.330755] hub 4-0:1.0: hub_resume
[   35.330828] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   35.330879] hub 4-0:1.0: hub_suspend
[   35.330892] usb usb4: bus auto-suspend, wakeup 1
[   35.331063] usb usb3: usb auto-resume
[   35.331084] hub 3-0:1.0: hub_resume
[   35.331121] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   35.331182] hub 3-0:1.0: hub_suspend
[   35.331191] usb usb3: bus auto-suspend, wakeup 1
[   35.331295] usb usb3: usb auto-resume
[   35.342589] hub 3-0:1.0: hub_resume
[   35.342669] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   35.342693] hub 3-0:1.0: hub_suspend
[   35.342711] usb usb3: bus auto-suspend, wakeup 1
[   35.348007] usb usb4: usb auto-resume
[   35.348028] hub 4-0:1.0: hub_resume
[   35.348080] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   35.348126] hub 4-0:1.0: hub_suspend
[   35.348136] usb usb4: bus auto-suspend, wakeup 1
[   35.348230] usb usb4: usb auto-resume
[   35.358567] hub 4-0:1.0: hub_resume
[   35.358655] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   35.358761] hub 4-0:1.0: hub_suspend
[   35.358777] usb usb4: bus auto-suspend, wakeup 1
[   35.358965] usb usb3: usb auto-resume
[   35.358988] hub 3-0:1.0: hub_resume
[   35.359031] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   35.359090] hub 3-0:1.0: hub_suspend
[   35.359100] usb usb3: bus auto-suspend, wakeup 1
[   35.359203] usb usb3: usb auto-resume
[   35.370517] hub 3-0:1.0: hub_resume
[   35.370583] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   35.370605] hub 3-0:1.0: hub_suspend
[   35.370623] usb usb3: bus auto-suspend, wakeup 1
[   35.411100] usb usb4: usb auto-resume
[   35.411126] hub 4-0:1.0: hub_resume
[   35.411223] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   35.411294] hub 4-0:1.0: hub_suspend
[   35.411307] usb usb4: bus auto-suspend, wakeup 1
[   35.411343] usb usb4: usb auto-resume
[   35.422480] hub 4-0:1.0: hub_resume
[   35.422541] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   35.422617] hub 4-0:1.0: hub_suspend
[   35.422628] usb usb4: bus auto-suspend, wakeup 1
[   35.422771] usb usb3: usb auto-resume
[   35.422792] hub 3-0:1.0: hub_resume
[   35.422829] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   35.422895] hub 3-0:1.0: hub_suspend
[   35.422903] usb usb3: bus auto-suspend, wakeup 1
[   35.423005] usb usb3: usb auto-resume
[   35.434469] hub 3-0:1.0: hub_resume
[   35.434530] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   35.434566] hub 3-0:1.0: hub_suspend
[   35.434579] usb usb3: bus auto-suspend, wakeup 1
[   36.585716] wlan0: authenticate with 00:04:0e:e4:00:3d
[   36.592328] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3)
[   36.594104] wlan0: authenticated
[   36.594446] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[   36.594454] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[   36.597611] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3)
[   36.601286] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1)
[   36.610648] wlan0: associated
[   36.610821] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   37.757101] usb 1-1.4: usb auto-suspend, wakeup 0
[  225.305302] wlan0: deauthenticating from 00:04:0e:e4:00:3d by local choice (reason=3)
[  225.315346] cfg80211: Calling CRDA to update world regulatory domain
[  225.325407] cfg80211: World regulatory domain updated:
[  225.325413] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  225.325418] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  225.325421] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  225.325424] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  225.325427] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  225.325430] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  227.207590] PM: Syncing filesystems ... done.
[  227.210934] PM: Preparing system for mem sleep
[  227.211350] Freezing user space processes ... (elapsed 0.01 seconds) done.
[  227.227301] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[  227.243272] PM: Entering mem sleep
[  227.243366] Suspending console(s) (use no_console_suspend to debug)
[  227.243798] usb 2-1.5: unlink qh1-0e01/ffff88011340dcc0 start 0 [1/2 us]
[  227.243840] usb 1-1.2: unlink qh8-0e01/ffff88008ecd0b40 start 3 [1/2 us]
[  227.243858] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[  227.243897] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  227.246021] usb 1-1.2: usb suspend, wakeup 0
[  227.246059] hub 1-1:1.0: hub_suspend
[  227.246094] usb 1-1: unlink qh256-0001/ffff8801186d1440 start 1 [1/0 us]
[  227.246511] sd 1:0:0:0: [sdb] Stopping disk
[  227.246561] usb 2-1: clear tt buffer port 5, a3 ep2 t04048d82
[  227.246616] usb 2-1.5: usb suspend, wakeup 0
[  227.246652] hub 2-1:1.0: hub_suspend
[  227.246657] usb 2-1: unlink qh256-0001/ffff8801186d1340 start 1 [1/0 us]
[  227.248277] usb 2-1: usb suspend, wakeup 0
[  227.248419] usb 1-1: usb suspend, wakeup 0
[  227.256587] usb usb3: usb auto-resume
[  227.256610] hub 3-0:1.0: hub_resume
[  227.256621] usb usb4: usb auto-resume
[  227.256630] hub 3-0:1.0: hub_suspend
[  227.256635] usb usb3: bus suspend, wakeup 0
[  227.256638] hub 4-0:1.0: hub_resume
[  227.256644] hub 2-0:1.0: hub_suspend
[  227.256649] usb usb2: bus suspend, wakeup 0
[  227.256651] ehci-pci 0000:00:1d.0: suspend root hub
[  227.256658] hub 4-0:1.0: hub_suspend
[  227.256661] usb usb4: bus suspend, wakeup 0
[  227.256680] hub 1-0:1.0: hub_suspend
[  227.256684] usb usb1: bus suspend, wakeup 0
[  227.256686] ehci-pci 0000:00:1a.0: suspend root hub
[  227.257092] mei_me 0000:00:16.0: suspend
[  227.378628] sd 0:0:0:0: [sda] Stopping disk
[  227.982872] PM: suspend of devices complete after 739.710 msecs
[  227.983130] PM: late suspend of devices complete after 0.255 msecs
[  227.983387] xhci_hcd 0000:03:00.0: wakeup: 1
[  227.998663] xhci_hcd 0000:03:00.0: --> PCI D3hot
[  227.998749] r8169 0000:02:00.0: System wakeup enabled by ACPI
[  228.030714] ehci-pci 0000:00:1d.0: wakeup: 1
[  228.046598] ehci-pci 0000:00:1d.0: --> PCI D3hot
[  228.046779] ehci-pci 0000:00:1a.0: wakeup: 1
[  228.062587] ehci-pci 0000:00:1a.0: --> PCI D3hot
[  228.078628] PM: noirq suspend of devices complete after 95.564 msecs
[  228.078895] ACPI: Preparing to enter system sleep state S3
[  228.079932] PM: Saving platform NVS memory
[  228.081683] Disabling non-boot CPUs ...
[  228.083434] smpboot: CPU 1 is now offline
[  228.186499] smpboot: CPU 2 is now offline
[  228.290424] smpboot: CPU 3 is now offline
[  228.292679] ACPI: Low-level resume complete
[  228.292733] PM: Restoring platform NVS memory
[  228.294020] Enabling non-boot CPUs ...
[  228.295096] smpboot: Booting Node 0 Processor 1 APIC 0x1
[  228.306088] Disabled fast string operations
[  228.308504] Intel pstate controlling: cpu 1
[  228.308603] CPU1 is up
[  228.309677] smpboot: Booting Node 0 Processor 2 APIC 0x2
[  228.320713] Disabled fast string operations
[  228.323147] Intel pstate controlling: cpu 2
[  228.323241] CPU2 is up
[  228.324301] smpboot: Booting Node 0 Processor 3 APIC 0x3
[  228.335335] Disabled fast string operations
[  228.337843] Intel pstate controlling: cpu 3
[  228.337938] CPU3 is up
[  228.342830] ACPI: Waking up from system sleep state S3
[  228.489120] PM: noirq resume of devices complete after 143.162 msecs
[  228.489362] PM: early resume of devices complete after 0.204 msecs
[  228.489404] i915 0000:00:02.0: setting latency timer to 64
[  228.489438] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X
[  228.489568] ahci 0000:00:1f.2: setting latency timer to 64
[  228.489691] iwlwifi 0000:01:00.0: RF_KILL bit toggled to enable radio.
[  228.489712] r8169 0000:02:00.0: System wakeup disabled by ACPI
[  228.489769] ehci-pci 0000:00:1a.0: setting latency timer to 64
[  228.489814] usb usb3: root hub lost power or was reset
[  228.489817] usb usb4: root hub lost power or was reset
[  228.491154] usb usb1: usb resume
[  228.491158] ehci-pci 0000:00:1a.0: resume root hub
[  228.493188] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[  228.493560] ehci-pci 0000:00:1d.0: setting latency timer to 64
[  228.493587] usb usb2: usb resume
[  228.493591] ehci-pci 0000:00:1d.0: resume root hub
[  228.494443] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
[  228.494454] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
[  228.494464] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
[  228.494474] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
[  228.494484] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
[  228.494960] usb usb3: usb resume
[  228.494982] usb usb4: usb resume
[  228.494985] hub 3-0:1.0: hub_reset_resume
[  228.494987] hub 3-0:1.0: trying to enable port power on non-switchable hub
[  228.494999] hub 4-0:1.0: hub_reset_resume
[  228.495001] hub 4-0:1.0: trying to enable port power on non-switchable hub
[  228.496488] [drm] Wrong MCH_SSKPD value: 0x16040307
[  228.496488] [drm] This can cause pipe underruns and display issues.
[  228.496489] [drm] Please upgrade your BIOS to fix this.
[  228.523930] hub 1-0:1.0: hub_resume
[  228.523950] hub 1-0:1.0: port 1: status 0503 change 0000
[  228.523995] usb 1-1: finish resume
[  228.524075] hub 1-1:1.0: hub_resume
[  228.524311] hub 1-1:1.0: port 2: status 0101 change 0001
[  228.524820] hub 1-1:1.0: port 4: status 0101 change 0001
[  228.527914] hub 2-0:1.0: hub_resume
[  228.527933] hub 2-0:1.0: port 1: status 0503 change 0000
[  228.527977] usb 2-1: finish resume
[  228.528081] hub 2-1:1.0: hub_resume
[  228.528687] hub 2-1:1.0: port 5: status 0101 change 0001
[  228.628802] ehci-pci 0000:00:1a.0: reused qh ffff8801186d1440 schedule
[  228.628806] usb 1-1: link qh256-0001/ffff8801186d1440 start 1 [1/0 us]
[  228.629063] usb 1-1.2: finish reset-resume
[  228.629366] usb 1-1.4: finish reset-resume
[  228.632741] ehci-pci 0000:00:1d.0: reused qh ffff8801186d1340 schedule
[  228.632751] usb 2-1: link qh256-0001/ffff8801186d1340 start 1 [1/0 us]
[  228.632986] usb 2-1.5: finish reset-resume
[  228.832716] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  228.836861] ata2.00: configured for UDMA/133
[  228.840625] ata4: SATA link down (SStatus 0 SControl 300)
[  228.848617] ata5: SATA link down (SStatus 0 SControl 300)
[  228.852696] sd 1:0:0:0: [sdb] Starting disk
[  228.888680] usb 1-1.2: reset low-speed USB device number 3 using ehci-pci
[  229.175217] usb 1-1.2: link qh8-0e01/ffff88008ecd0b40 start 4 [1/2 us]
[  229.240453] usb 1-1.4: reset high-speed USB device number 4 using ehci-pci
[  229.404361] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci
[  229.498911] btusb 2-1.5:1.0: no reset_resume for driver btusb?
[  229.498914] btusb 2-1.5:1.1: no reset_resume for driver btusb?
[  229.498919] btusb 2-1.5:1.0: forced unbind
[  229.624350] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[  230.903206] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  230.905464] ata1.00: configured for UDMA/133
[  230.919249] sd 0:0:0:0: [sda] Starting disk
[  230.947021] PM: resume of devices complete after 2459.392 msecs
[  230.947093] btusb 2-1.5:1.0: usb_probe_interface
[  230.947095] btusb 2-1.5:1.0: usb_probe_interface - got id
[  230.947846] usb 2-1.5: link qh1-0e01/ffff880073637740 start 0 [1/2 us]
[  230.948100] PM: Finishing wakeup.
[  230.948171] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[  230.948178] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[  230.948181] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000
[  230.948184] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
[  230.948187] hub 1-1:1.0: state 7 ports 6 chg 0014 evt 0010
[  230.951032] hub 4-0:1.0: hub_suspend
[  230.951043] usb usb4: bus auto-suspend, wakeup 1
[  230.951117] hub 3-0:1.0: hub_suspend
[  230.951123] usb usb3: bus auto-suspend, wakeup 1
[  230.948102] Restarting tasks ... done.
[  230.951215] hub 1-1:1.0: port 2, status 0303, change 0000, 1.5 Mb/s
[  230.952534] hub 1-1:1.0: port 4, status 0503, change 0000, 480 Mb/s
[  230.952544] hub 2-1:1.0: state 7 ports 6 chg 0020 evt 0000
[  230.952798] hub 2-1:1.0: port 5, status 0103, change 0000, 12 Mb/s
[  230.961966] video LNXVIDEO:00: Restoring backlight state
[  231.476452] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[  231.483282] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[  231.643011] usb 1-1.4: usb auto-suspend, wakeup 0
[  231.693546] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  237.929999] wlan0: authenticate with 00:04:0e:e4:00:3d
[  237.934593] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3)
[  237.936422] wlan0: authenticated
[  237.936549] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[  237.936552] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[  237.938167] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3)
[  237.942163] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1)
[  237.949513] wlan0: associated
[  237.949645] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

Attachment: config-3.9.0-rc8-next20130426-4-iniza-small
Description: Binary data