On Sat, Apr 27, 2013 at 4:10 AM, Artem S. Tashkinov <t.artem@xxxxxxxxx> wrote:
Did this problem ever get resolved?
Hello,
Unfortunately, no. Out of curiosity I've tried booting kernel
3.9-rc8 in EUFI mode but it exhibits the same problem.
Right after the boot:
[root@localhost ~]# dd if=/dev/zero of=test bs=64M count=3
3+0 records in
3+0 records out
201326592 bytes (201 MB) copied, 1.08544 s, 185 MB/s
After suspend/resume:
# dd if=/dev/zero of=test bs=64M count=3
3+0 records in
3+0 records out
201326592 bytes (201 MB) copied, 66.5392 s, 3.0 MB/s
That's for my primary SATA-3 HDD.
Forgive me my impudence but I believe debugging the USB stack is
tangential to this problem. Something far deeper than USB support
breaks, but so far no one has come even with the slightest clue of
what that might be.
I tend to agree that it sounds like something deeper than USB is
broken. I admit I'm just grasping at straws because I don't have any
good ideas yet.
Here are three easy things you can try:
1) Collect "lspci -vvv -xxxx" output before and after the
suspend/resume to investigate the XHCI Unsupported Request errors.
2) Collect the contents of /proc/mtrr before and after the suspend/resume.
3) After the suspend/resume, try the "setpci" to set the MSI address
back to the original value to see if it makes a difference (see my Feb
12 message).