Re: [PATCH 1/1] powerpc: mpc512x_dma: add support for datatransfers between memory and i/o memory

[Vinod Koul]

On Wed, May 01, 2013 at 03:28:09PM +0400, Alexander Popov wrote:
> The initial version of this driver supports only memory to memory
> data transfers.
> 
> Data transfers between memory and i/o memory require more delicate TCD
> (Transfer Control Descriptor) configuration and DMA channel service requests
> via hardware.
> 
> dma_device.device_control callback function is needed to configure
> DMA channel to work with i/o memory.
> 
> Signed-off-by: Alexander Popov <a13xp0p0v88@xxxxxxxxx>
> ---
>  drivers/dma/mpc512x_dma.c | 230 ++++++++++++++++++++++++++++++++++++++--------
>  1 file changed, 192 insertions(+), 38 deletions(-)
> 
> diff --git a/drivers/dma/mpc512x_dma.c b/drivers/dma/mpc512x_dma.c
> index 2d95673..8aedff1 100644
> --- a/drivers/dma/mpc512x_dma.c
> +++ b/drivers/dma/mpc512x_dma.c
> @@ -2,6 +2,7 @@
>   * Copyright (C) Freescale Semicondutor, Inc. 2007, 2008.
>   * Copyright (C) Semihalf 2009
>   * Copyright (C) Ilya Yanok, Emcraft Systems 2010
> + * Copyright (C) Alexander Popov, Promcontroller 2013
>   *
>   * Written by Piotr Ziecik <kosmo@xxxxxxxxxxxx>. Hardware description
>   * (defines, structures and comments) was taken from MPC5121 DMA driver
> @@ -28,11 +29,6 @@
>   * file called COPYING.
>   */
>  
> -/*
> - * This is initial version of MPC5121 DMA driver. Only memory to memory
> - * transfers are supported (tested using dmatest module).
> - */
> -
>  #include <linux/module.h>
>  #include <linux/dmaengine.h>
>  #include <linux/dma-mapping.h>
> @@ -183,6 +179,8 @@ struct mpc_dma_desc {
>  
>  struct mpc_dma_chan {
>  	struct dma_chan			chan;
> +	enum dma_transfer_direction	dir;
> +	enum dma_slave_buswidth		slave_reg_width;
>  	struct list_head		free;
>  	struct list_head		prepared;
>  	struct list_head		queued;
> @@ -190,6 +188,7 @@ struct mpc_dma_chan {
>  	struct list_head		completed;
>  	struct mpc_dma_tcd		*tcd;
>  	dma_addr_t			tcd_paddr;
> +	u32				tcd_nunits;
>  
>  	/* Lock for this structure */
>  	spinlock_t			lock;
> @@ -268,7 +267,11 @@ static void mpc_dma_execute(struct mpc_dma_chan *mchan)
>  
>  	if (first != prev)
>  		mdma->tcd[cid].e_sg = 1;
> -	out_8(&mdma->regs->dmassrt, cid);
> +
> +	if (first->tcd->biter != 1) /* Request channel service by... */
> +		out_8(&mdma->regs->dmaserq, cid); /* hardware */
> +	else
> +		out_8(&mdma->regs->dmassrt, cid); /* software */
>  }
>  
>  /* Handle interrupt on one half of DMA controller (32 channels) */
> @@ -567,7 +570,42 @@ mpc_dma_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
>  	return ret;
>  }
>  
> -/* Prepare descriptor for memory to memory copy */
> +static int mpc_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
> +						unsigned long arg)
> +{
> +	struct mpc_dma_chan *mchan = dma_chan_to_mpc_dma_chan(chan);
> +	struct dma_slave_config *cfg = (void *)arg;
> +	int ret = 0;
> +
> +	if (!chan)
> +		return -EINVAL;
> +
> +	if (cmd == DMA_SLAVE_CONFIG && cfg) {
> +		if (cfg->direction == DMA_DEV_TO_MEM) {
> +			if (cfg->src_addr_width != DMA_SLAVE_BUSWIDTH_UNDEFINED)
> +				mchan->slave_reg_width = cfg->src_addr_width;
> +			else
> +				return -EINVAL;
> +			mchan->dir = DMA_DEV_TO_MEM;
> +			mchan->tcd_nunits = cfg->src_maxburst;
you need to save the slave addr too.

> +		} else if (cfg->direction == DMA_MEM_TO_DEV) {
> +			if (cfg->dst_addr_width != DMA_SLAVE_BUSWIDTH_UNDEFINED)
> +				mchan->slave_reg_width = cfg->dst_addr_width;
> +			else
> +				return -EINVAL;
> +			mchan->dir = DMA_MEM_TO_DEV;
> +			mchan->tcd_nunits = cfg->dst_maxburst;
> +		} else {
> +			mchan->dir = DMA_MEM_TO_MEM;
> +			mchan->slave_reg_width = DMA_SLAVE_BUSWIDTH_UNDEFINED;
> +			mchan->tcd_nunits = 0;
> +		}
> +	} else
> +		return -ENOSYS;
ENXIO?

while at it, consider a different way:

	if (cmd != DMA_SLAVE_CONFIG || !cfg)
		return -ENXIO;

then you can shift the sholw code one indent left, makes it look a little
better.

> +
> +	return ret;
> +}
> +
>  static struct dma_async_tx_descriptor *
>  mpc_dma_prep_memcpy(struct dma_chan *chan, dma_addr_t dst, dma_addr_t src,
>  					size_t len, unsigned long flags)
> @@ -577,6 +615,7 @@ mpc_dma_prep_memcpy(struct dma_chan *chan, dma_addr_t dst, dma_addr_t src,
>  	struct mpc_dma_desc *mdesc = NULL;
>  	struct mpc_dma_tcd *tcd;
>  	unsigned long iflags;
> +	u32 iter = 0;
>  
>  	/* Get free descriptor */
>  	spin_lock_irqsave(&mchan->lock, iflags);
> @@ -599,39 +638,153 @@ mpc_dma_prep_memcpy(struct dma_chan *chan, dma_addr_t dst, dma_addr_t src,
>  	/* Prepare Transfer Control Descriptor for this transaction */
>  	memset(tcd, 0, sizeof(struct mpc_dma_tcd));
>  
> -	if (IS_ALIGNED(src | dst | len, 32)) {
> -		tcd->ssize = MPC_DMA_TSIZE_32;
> -		tcd->dsize = MPC_DMA_TSIZE_32;
> -		tcd->soff = 32;
> -		tcd->doff = 32;
> -	} else if (!mdma->is_mpc8308 && IS_ALIGNED(src | dst | len, 16)) {
> -		/* MPC8308 doesn't support 16 byte transfers */
> -		tcd->ssize = MPC_DMA_TSIZE_16;
> -		tcd->dsize = MPC_DMA_TSIZE_16;
> -		tcd->soff = 16;
> -		tcd->doff = 16;
> -	} else if (IS_ALIGNED(src | dst | len, 4)) {
> -		tcd->ssize = MPC_DMA_TSIZE_4;
> -		tcd->dsize = MPC_DMA_TSIZE_4;
> -		tcd->soff = 4;
> -		tcd->doff = 4;
> -	} else if (IS_ALIGNED(src | dst | len, 2)) {
> -		tcd->ssize = MPC_DMA_TSIZE_2;
> -		tcd->dsize = MPC_DMA_TSIZE_2;
> -		tcd->soff = 2;
> -		tcd->doff = 2;
> -	} else {
> -		tcd->ssize = MPC_DMA_TSIZE_1;
> -		tcd->dsize = MPC_DMA_TSIZE_1;
> -		tcd->soff = 1;
> -		tcd->doff = 1;
> -	}
> -
>  	tcd->saddr = src;
>  	tcd->daddr = dst;
> -	tcd->nbytes = len;
> -	tcd->biter = 1;
> -	tcd->citer = 1;
> +	if (mchan->dir == DMA_MEM_TO_MEM) {
> +		if (IS_ALIGNED(src | dst | len, 32)) {
> +			tcd->ssize = MPC_DMA_TSIZE_32;
> +			tcd->dsize = MPC_DMA_TSIZE_32;
> +			tcd->soff = 32;
> +			tcd->doff = 32;
> +		} else if (!mdma->is_mpc8308 &&
> +					IS_ALIGNED(src | dst | len, 16)) {
> +			/* MPC8308 doesn't support 16 byte transfers */
> +			tcd->ssize = MPC_DMA_TSIZE_16;
> +			tcd->dsize = MPC_DMA_TSIZE_16;
> +			tcd->soff = 16;
> +			tcd->doff = 16;
> +		} else if (IS_ALIGNED(src | dst | len, 4)) {
> +			tcd->ssize = MPC_DMA_TSIZE_4;
> +			tcd->dsize = MPC_DMA_TSIZE_4;
> +			tcd->soff = 4;
> +			tcd->doff = 4;
> +		} else if (IS_ALIGNED(src | dst | len, 2)) {
> +			tcd->ssize = MPC_DMA_TSIZE_2;
> +			tcd->dsize = MPC_DMA_TSIZE_2;
> +			tcd->soff = 2;
> +			tcd->doff = 2;
> +		} else {
> +			tcd->ssize = MPC_DMA_TSIZE_1;
> +			tcd->dsize = MPC_DMA_TSIZE_1;
> +			tcd->soff = 1;
> +			tcd->doff = 1;
> +		}
> +		tcd->nbytes = len;
> +		tcd->biter = 1;
> +		tcd->citer = 1;
> +	} else {
Nope!

This is mempcy and just does memcy and not io-transfers. You need to use
.device_prep_slave_sg() for below...
> +		/* Memory to io-memory transfer or vice versa.
> +		 * DMA controller is going to access io-memory via
> +		 * some FIFO data register. The width of this register
> +		 * is mchan->slave_reg_width.
> +		 *
> +		 * Since some FIFO registers require full width access,
> +		 * let's firmly set the corresponding transfer size
> +		 * to mchan->slave_reg_width
> +		 * and prohibit transfers of packets with a length
> +		 * which is not aligned on mchan->slave_reg_width boundaries
> +		 * to avoid Transfer Control Descriptor inconsistency.
> +		 * Moreover this will save us from playing with
> +		 * source and destination address modulo.
> +		 */
> +
> +		if (!IS_ALIGNED(len, mchan->slave_reg_width))
> +			return NULL;
> +
> +		if (mchan->dir == DMA_DEV_TO_MEM) {
> +			tcd->soff = 0;
> +			if (mchan->slave_reg_width ==
> +					DMA_SLAVE_BUSWIDTH_4_BYTES) {
> +				tcd->ssize = MPC_DMA_TSIZE_4;
> +				if (IS_ALIGNED(dst, 4)) {
> +					tcd->dsize = MPC_DMA_TSIZE_4;
> +					tcd->doff = 4;
> +				} else if (IS_ALIGNED(dst, 2)) {
> +					tcd->dsize = MPC_DMA_TSIZE_2;
> +					tcd->doff = 2;
> +				} else {
> +					tcd->dsize = MPC_DMA_TSIZE_1;
> +					tcd->doff = 1;
> +				}
1. this could use a handler and thus code can look better
2. consider switch for above logic
3. consider converting to TSIZE programatically

> +			} else if (mchan->slave_reg_width ==
> +					DMA_SLAVE_BUSWIDTH_2_BYTES) {
> +				tcd->ssize = MPC_DMA_TSIZE_2;
> +				if (IS_ALIGNED(dst, 2)) {
> +					tcd->dsize = MPC_DMA_TSIZE_2;
> +					tcd->doff = 2;
> +				} else {
> +					tcd->dsize = MPC_DMA_TSIZE_1;
> +					tcd->doff = 1;
> +				}
> +			} else if (mchan->slave_reg_width ==
> +					DMA_SLAVE_BUSWIDTH_1_BYTE) {
> +				tcd->ssize = MPC_DMA_TSIZE_1;
> +				tcd->dsize = MPC_DMA_TSIZE_1;
> +				tcd->doff = 1;
seems repeat of above and should be handled seprately in single place...

> +			} else
> +				return NULL;
> +		} else {
> +			tcd->doff = 0;
> +			if (mchan->slave_reg_width ==
> +					DMA_SLAVE_BUSWIDTH_4_BYTES) {
> +				tcd->dsize = MPC_DMA_TSIZE_4;
> +				if (IS_ALIGNED(src, 4)) {
> +					tcd->ssize = MPC_DMA_TSIZE_4;
> +					tcd->soff = 4;
> +				} else if (IS_ALIGNED(src, 2)) {
> +					tcd->ssize = MPC_DMA_TSIZE_2;
> +					tcd->soff = 2;
> +				} else {
> +					tcd->ssize = MPC_DMA_TSIZE_1;
> +					tcd->soff = 1;
> +				}
> +			} else if (mchan->slave_reg_width ==
> +					DMA_SLAVE_BUSWIDTH_2_BYTES) {
> +				tcd->dsize = MPC_DMA_TSIZE_2;
> +				if (IS_ALIGNED(src, 2)) {
> +					tcd->ssize = MPC_DMA_TSIZE_2;
> +					tcd->soff = 2;
> +				} else {
> +					tcd->ssize = MPC_DMA_TSIZE_1;
> +					tcd->soff = 1;
> +				}
> +			} else if (mchan->slave_reg_width ==
> +					DMA_SLAVE_BUSWIDTH_1_BYTE) {
> +				tcd->dsize = MPC_DMA_TSIZE_1;
> +				tcd->ssize = MPC_DMA_TSIZE_1;
> +				tcd->soff = 1;
> +			} else
> +				return NULL;
> +		}
> +
> +		if (mchan->tcd_nunits) {
> +			tcd->nbytes = mchan->tcd_nunits *
> +						mchan->slave_reg_width;
> +			if (!IS_ALIGNED(len, tcd->nbytes)) {
> +				/* mchan->tcd_nunits is inconsistent */
> +				return NULL;
> +			}
> +
> +			iter = len / tcd->nbytes;
> +			if (iter > ((1 << 15) - 1)) {	/* maximum biter */
> +				return NULL; /* len is too big */
> +			} else {
> +				tcd->biter = iter;
> +				tcd->biter_linkch = iter >> 9;
> +				tcd->citer = tcd->biter;
> +				tcd->citer_linkch = tcd->biter_linkch;
> +			}
> +
> +			/* DMA hardware should automatically clear
> +			 * the corresponding DMAERQ bit when
> +			 * the current major iteration count reaches zero. */
> +			tcd->d_req = 1;
> +		} else {
> +			tcd->nbytes = len;
> +			tcd->biter = 1;
> +			tcd->citer = 1;
> +		}
> +	}

--
~Vinod
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/