Re: [PATCH] clk: ux500: clk-sysctrl: handle clocks with no parents

[Ulf Hansson]

On 3 May 2013 10:51, Ulf Hansson <ulf.hansson@xxxxxxxxxx> wrote:
> On 30 April 2013 14:45, Fabio Baltieri <fabio.baltieri@xxxxxxxxxx> wrote:
>> Fix clk_reg_sysctrl() to set main clock registers of new struct
>> clk_sysctrl even if the registered clock has no parents.
>>
>> This fixes an issue where "ulpclk" was registered with all clk->reg_*
>> fields uninitialized, causing a -EINVAL error from clk_prepare().
>>
>> Cc: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
>> Signed-off-by: Fabio Baltieri <fabio.baltieri@xxxxxxxxxx>
>> ---
>>  drivers/clk/ux500/clk-sysctrl.c | 8 +++++++-
>>  1 file changed, 7 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/clk/ux500/clk-sysctrl.c b/drivers/clk/ux500/clk-sysctrl.c
>> index bc7e9bd..e364c9d 100644
>> --- a/drivers/clk/ux500/clk-sysctrl.c
>> +++ b/drivers/clk/ux500/clk-sysctrl.c
>> @@ -145,7 +145,13 @@ static struct clk *clk_reg_sysctrl(struct device *dev,
>>                 return ERR_PTR(-ENOMEM);
>>         }
>>
>> -       for (i = 0; i < num_parents; i++) {
>> +       /* set main clock registers */
>> +       clk->reg_sel[0] = reg_sel[0];
>> +       clk->reg_bits[0] = reg_bits[0];
>> +       clk->reg_mask[0] = reg_mask[0];
>> +
>> +       /* handle clocks with more than one parent */
>> +       for (i = 1; i < num_parents; i++) {
>>                 clk->reg_sel[i] = reg_sel[i];
>>                 clk->reg_bits[i] = reg_bits[i];
>>                 clk->reg_mask[i] = reg_mask[i];
>> --
>> 1.8.2
>>
>
> Acked-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
>
> This is bugfix, should go "stable" as well?

Stable means 3.10 rcs, since the abx500 clk tree was added for 3.10.

>
> Kind regards
> Ulf Hansson
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/