[ 10/63] USB: ftdi_sio: correct ST Micro Connect Lite PIDs

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Adrian Thomasset <adrian.thomasset@xxxxxx>

commit 9f06d15f8db6946e41f73196a122b84a37938878 upstream.

The current ST Micro Connect Lite uses the FT4232H hi-speed quad USB
UART FTDI chip. It is also possible to drive STM reference targets
populated with an on-board JTAG debugger based on the FT2232H chip with
the same STMicroelectronics tools.

For this reason, the ST Micro Connect Lite PIDs should be
ST_STMCLT_2232_PID: 0x3746
ST_STMCLT_4232_PID: 0x3747

Signed-off-by: Adrian Thomasset <adrian.thomasset@xxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/usb/serial/ftdi_sio.c     |    4 +++-
 drivers/usb/serial/ftdi_sio_ids.h |    3 ++-
 2 files changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -879,7 +879,9 @@ static struct usb_device_id id_table_com
 	{ USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) },
 	{ USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-	{ USB_DEVICE(ST_VID, ST_STMCLT1030_PID),
+	{ USB_DEVICE(ST_VID, ST_STMCLT_2232_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(ST_VID, ST_STMCLT_4232_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk },
 	{ USB_DEVICE(FTDI_VID, FTDI_RF_R106) },
 	{ USB_DEVICE(FTDI_VID, FTDI_DISTORTEC_JTAG_LOCK_PICK_PID),
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1151,7 +1151,8 @@
  * STMicroelectonics
  */
 #define ST_VID			0x0483
-#define ST_STMCLT1030_PID	0x3747 /* ST Micro Connect Lite STMCLT1030 */
+#define ST_STMCLT_2232_PID	0x3746
+#define ST_STMCLT_4232_PID	0x3747
 
 /*
  * Papouch products (http://www.papouch.com/)


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/