Re: net: phy: realtek: add rtl8201f driver

[Francois Romieu]

Jongsung Kim <neidhard.kim@xxxxxxx> :
> This patch adds the minimal driver to manage the
> Realtek RTL8201F 10/100Mbps Transceivers.

Your patch contains both "remove unused #define" and "support new hardware"
parts. I am not sure that the former is adequate for submission until
net-next opens.

> diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
[...]
> +static int rtl8201f_config_intr(struct phy_device *phydev)
> +{
> +	int err;
> +
> +	phy_write(phydev, RTL8201F_PSR, 0x0007);	/* select page 7 */

static void rtl8201f_page_select(struct phy_device *phydev, int page) ?

[...]
> @@ -96,16 +141,16 @@ static struct phy_driver rtl8211e_driver = {
>  
>  static int __init realtek_init(void)
>  {
> -	int ret;
> -
> -	ret = phy_driver_register(&rtl8211b_driver);
> -	if (ret < 0)
> +	if(phy_driver_register(&rtl8201f_driver) < 0)
         ^^ -> missing space.

> +		return -ENODEV;

Please propagate phy_driver_register error code.

> +	if(phy_driver_register(&rtl8211b_driver) < 0)
>  		return -ENODEV;
>  	return phy_driver_register(&rtl8211e_driver);

Unbalanced error paths.

>  }
>  
>  static void __exit realtek_exit(void)
>  {
> +	phy_driver_unregister(&rtl8201f_driver);
>  	phy_driver_unregister(&rtl8211b_driver);
>  	phy_driver_unregister(&rtl8211e_driver);

Code duplication.

You may use an array of phy_driver for realtek_{init/exit}

-- 
Ueimor
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/