Re: [PATCHv2] ARM:dts:omap4-panda:Update the LED support for thepanda DTS
From: Tony Lindgren
Date: Wed May 08 2013 - 19:47:56 EST
* Dan Murphy <dmurphy@xxxxxx> [130418 11:35]:
> On 04/18/2013 04:30 AM, Vincent Stehlà wrote:
> >On 04/17/2013 10:16 PM, Dan Murphy wrote:
> >>The GPIO for LED D1 on the omap4-panda a1-a3 rev and the omap4-panda-es
> >>are different.
> >(..)
> >>diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
> >>index 03bd60d..0c48f6b 100644
> >>--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
> >>+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
> >(..)
> >>@@ -135,6 +136,25 @@
> >> 0xf0 0x118 /* i2c4_sda PULLUP | INPUTENABLE | MODE0 */
> >> >;
> >> };
> >>+
> >>+ led_gpio_pins: pinmux_leds_pins {
> >>+ pinctrl-single,pins = <
> >>+ >;
> >>+ };
> >>+};
> >Hi,
> >
> >FYI, there was a recent discussion precisely on this topic, where Tomy
> >suggested to remove the empty section:
> >http://marc.info/?l=linux-omap&m=136546635409232&w=2
> >
> >Apart from that, I just tested your patch on top of Tomy's
> >omap-for-v3.10/dt branch and it is working fine for me on PandaBoards
> >EA3, A4 and ES.
> >
> >Tested-by: Vincent Stehlà <v-stehle@xxxxxx>
> >
> >Best regards,
> >
> >V.
> >
> Thanks for testing Vincent
>
> Is there a way to append the data to an already existing node?
> I do not see a clean way.
If you have something in omap4-panda-common.dtsi and the same entry
in the omap4-panda-es.dts, the entries in omap4-panda-es.dts will
override and append the entries in omap4-panda-common.dtsi.
So I think you can avoid the empty entry that way.
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/