[PATCH] usb: xhci: Consolidate XHCI TD Size calculation
From: Julius Werner
Date: Fri May 10 2013 - 00:43:44 EST
The TD Size field in an XHCI TRB is calculated in two different ways,
depending on the XHCI version. The current code does this version check
in every caller, which makes it easy to forget (such as in the function
for control transfers, which still erroneously uses the old calculation
for its data stage TRB). The 1.0 calculation has also been corrected and
amended several times, growing slightly more complicated than necessary.
This patch moves the XHCI version check into a single, unified (and
slightly simplified) xhci_td_remainder() function, which deduplicates
code and looks cleaner in the callers.
Signed-off-by: Julius Werner <jwerner@xxxxxxxxxxxx>
---
drivers/usb/host/xhci-ring.c | 111 +++++++++++--------------------------------
1 file changed, 29 insertions(+), 82 deletions(-)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 1969c00..32629b2 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -3074,54 +3074,33 @@ int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
}
/*
- * The TD size is the number of bytes remaining in the TD (including this TRB),
- * right shifted by 10.
- * It must fit in bits 21:17, so it can't be bigger than 31.
- */
-static u32 xhci_td_remainder(unsigned int remainder)
-{
- u32 max = (1 << (21 - 17 + 1)) - 1;
-
- if ((remainder >> 10) >= max)
- return max << 17;
- else
- return (remainder >> 10) << 17;
-}
-
-/*
- * For xHCI 1.0 host controllers, TD size is the number of max packet sized
- * packets remaining in the TD (*not* including this TRB).
- *
- * Total TD packet count = total_packet_count =
- * DIV_ROUND_UP(TD size in bytes / wMaxPacketSize)
+ * Calculate the TD Size field of a TRB, shifted to its correct position
+ * in bits 21:17. In pre-1.0 XHCI versions, this field contains the
+ * number of bytes left in the TD, including the current TRB, in kB.
*
- * Packets transferred up to and including this TRB = packets_transferred =
- * rounddown(total bytes transferred including this TRB / wMaxPacketSize)
+ * In XHCI 1.0, it contains the amount of packets left in the TD,
+ * excluding the current TRB. Even though the spec explains this in a
+ * roundabout way, the end result is just the amount of bytes left after
+ * this TRB divided by the maximum packet size, rounded up. For the last
+ * TRB this is naturally zero since there cannot be any more bytes left.
*
- * TD size = total_packet_count - packets_transferred
- *
- * It must fit in bits 21:17, so it can't be bigger than 31.
- * The last TRB in a TD must have the TD size set to zero.
+ * @running_total: amount of bytes in the TD before this TRB
+ * @trb_len: amount of bytes in the current TRB
+ * @total_len: total amount of bytes in the TD
*/
-static u32 xhci_v1_0_td_remainder(int running_total, int trb_buff_len,
- unsigned int total_packet_count, struct urb *urb,
- unsigned int num_trbs_left)
+static u32 xhci_td_remainder(int running_total, int trb_len, int total_len,
+ struct urb *urb)
{
- int packets_transferred;
+ u32 result;
- /* One TRB with a zero-length data packet. */
- if (num_trbs_left == 0 || (running_total == 0 && trb_buff_len == 0))
- return 0;
-
- /* All the TRB queueing functions don't count the current TRB in
- * running_total.
- */
- packets_transferred = (running_total + trb_buff_len) /
- GET_MAX_PACKET(usb_endpoint_maxp(&urb->ep->desc));
+ if (hcd_to_xhci(bus_to_hcd(urb->dev->bus))->hci_version < 0x100)
+ result = (total_len - running_total) >> 10;
+ else
+ result = DIV_ROUND_UP(total_len - running_total - trb_len,
+ GET_MAX_PACKET(usb_endpoint_maxp(&urb->ep->desc)));
- if ((total_packet_count - packets_transferred) > 31)
- return 31 << 17;
- return (total_packet_count - packets_transferred) << 17;
+ /* TD size field is only 5 bit wide, so cap this at 31 */
+ return min(result, 31u) << 17;
}
static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
@@ -3134,7 +3113,6 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
struct scatterlist *sg;
int num_sgs;
int trb_buff_len, this_sg_len, running_total;
- unsigned int total_packet_count;
bool first_trb;
u64 addr;
bool more_trbs_coming;
@@ -3148,8 +3126,6 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
num_trbs = count_sg_trbs_needed(xhci, urb);
num_sgs = urb->num_mapped_sgs;
- total_packet_count = DIV_ROUND_UP(urb->transfer_buffer_length,
- usb_endpoint_maxp(&urb->ep->desc));
trb_buff_len = prepare_transfer(xhci, xhci->devs[slot_id],
ep_index, urb->stream_id,
@@ -3191,7 +3167,6 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
do {
u32 field = 0;
u32 length_field = 0;
- u32 remainder = 0;
/* Don't change the cycle bit of the first TRB until later */
if (first_trb) {
@@ -3225,17 +3200,9 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
}
/* Set the TRB length, TD size, and interrupter fields. */
- if (xhci->hci_version < 0x100) {
- remainder = xhci_td_remainder(
- urb->transfer_buffer_length -
- running_total);
- } else {
- remainder = xhci_v1_0_td_remainder(running_total,
- trb_buff_len, total_packet_count, urb,
- num_trbs - 1);
- }
length_field = TRB_LEN(trb_buff_len) |
- remainder |
+ xhci_td_remainder(running_total, trb_buff_len,
+ urb->transfer_buffer_length, urb) |
TRB_INTR_TARGET(0);
if (num_trbs > 1)
@@ -3294,7 +3261,6 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
u32 field, length_field;
int running_total, trb_buff_len, ret;
- unsigned int total_packet_count;
u64 addr;
if (urb->num_sgs)
@@ -3340,8 +3306,6 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
start_cycle = ep_ring->cycle_state;
running_total = 0;
- total_packet_count = DIV_ROUND_UP(urb->transfer_buffer_length,
- usb_endpoint_maxp(&urb->ep->desc));
/* How much data is in the first TRB? */
addr = (u64) urb->transfer_dma;
trb_buff_len = TRB_MAX_BUFF_SIZE -
@@ -3353,7 +3317,6 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
/* Queue the first TRB, even if it's zero-length */
do {
- u32 remainder = 0;
field = 0;
/* Don't change the cycle bit of the first TRB until later */
@@ -3380,17 +3343,9 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
field |= TRB_ISP;
/* Set the TRB length, TD size, and interrupter fields. */
- if (xhci->hci_version < 0x100) {
- remainder = xhci_td_remainder(
- urb->transfer_buffer_length -
- running_total);
- } else {
- remainder = xhci_v1_0_td_remainder(running_total,
- trb_buff_len, total_packet_count, urb,
- num_trbs - 1);
- }
length_field = TRB_LEN(trb_buff_len) |
- remainder |
+ xhci_td_remainder(running_total, trb_buff_len,
+ urb->transfer_buffer_length, urb) |
TRB_INTR_TARGET(0);
if (num_trbs > 1)
@@ -3502,7 +3457,8 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
field = TRB_TYPE(TRB_DATA);
length_field = TRB_LEN(urb->transfer_buffer_length) |
- xhci_td_remainder(urb->transfer_buffer_length) |
+ xhci_td_remainder(0, urb->transfer_buffer_length,
+ urb->transfer_buffer_length, urb) |
TRB_INTR_TARGET(0);
if (urb->transfer_buffer_length > 0) {
if (setup->bRequestType & USB_DIR_IN)
@@ -3673,7 +3629,6 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
td = urb_priv->td[i];
for (j = 0; j < trbs_per_td; j++) {
- u32 remainder = 0;
field = 0;
if (first_trb) {
@@ -3726,17 +3681,9 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
trb_buff_len = td_remain_len;
/* Set the TRB length, TD size, & interrupter fields. */
- if (xhci->hci_version < 0x100) {
- remainder = xhci_td_remainder(
- td_len - running_total);
- } else {
- remainder = xhci_v1_0_td_remainder(
- running_total, trb_buff_len,
- total_packet_count, urb,
- (trbs_per_td - j - 1));
- }
length_field = TRB_LEN(trb_buff_len) |
- remainder |
+ xhci_td_remainder(running_total, trb_buff_len,
+ td_len, urb) |
TRB_INTR_TARGET(0);
queue_trb(xhci, ep_ring, more_trbs_coming,
--
1.7.12.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/