Re: [PATCH] ARM: dts: add pin state information for DP HPD support to Exynos5250

[Doug Anderson]

Jingoo,

On Sat, May 11, 2013 at 1:09 AM, Jingoo Han <jg1.han@xxxxxxxxxxx> wrote:
> Add pin state information for DP HPD support that requires
> pin configuration support using pinctrl interface.
>
> Signed-off-by: Jingoo Han <jg1.han@xxxxxxxxxxx>
> ---
> Tested on Exynos5250
>
>  arch/arm/boot/dts/exynos5250-pinctrl.dtsi |    7 +++++++
>  arch/arm/boot/dts/exynos5250-smdk5250.dts |    3 +++
>  2 files changed, 10 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
> index d1650fb..e9cdee3 100644
> --- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
> @@ -553,6 +553,13 @@
>                         samsung,pin-pud = <0>;
>                         samaung,pin-drv = <0>;
>                 };
> +
> +               dp_hpd: dp_hpd {
> +                       samsung,pins = "gpx0-7";
> +                       samsung,pin-function = <3>;
> +                       samsung,pin-pud = <0>;
> +                       samaung,pin-drv = <0>;
> +               };
>         };
>
>         pinctrl@13400000 {
> diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
> index 3e0c792..d53ea34 100644
> --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
> +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
> @@ -224,6 +224,9 @@
>                 samsung,color-depth = <1>;
>                 samsung,link-rate = <0x0a>;
>                 samsung,lane-count = <4>;
> +
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&dp_hpd>;

I was going to suggest moving this to exynos5250.dtsi but then
realized that I saw a board recently that used a non-standard HPD pin
recently!  ...so keeping it in the board file (like you've done) is
good.

...so looks good to me.

Reviewed-by: Doug Anderson <dianders@xxxxxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/