Re: [RFC PATCHv2 2/2] PM: compile-time configuration of devicesuspend/resume watchdogs.

[Colin Cross]

On Sat, May 11, 2013 at 2:28 AM, Pavel Machek <pavel@xxxxxx> wrote:
> Hi!
>
>> Power management debug option to configure device suspend/resume watchdogs.
>> Available options are:
>>   1. Enable/disable the feature.
>>   2. Select triggered watchdog action between:
>>         - system panic (default)
>>         - dump stacktrace
>>         - log event
>>   3. Select timeout value for the watchdog(s).
>
> People disliked the previous behaviour, so you add 10 config
> options... with different behaviours. Also 1 second timeout is not
> acceptable for endusers (will break the system), so it should not be
> offered. In fact, remove that option, too. People doing that kind of
> debugging can modify the sources, right?

Greg KH asked for more configurable options.  I agree this may be a
little too far (I would replace the action choice with a simple "panic
on timeout?"), but its better than it was before.  Also, a 1 second
timeout is perfectly reasonable, especially if you configure it to
dump a stack trace but not panic.  Mobile devices normally finish
suspending within a few hundred ms.

> (Maybe it would make sense to do same action regular watchdog does,
> but...)
>
> That's not the way to go. If "panic" is right behaviour, just go with
> panic.

I can see uses for both panic and stack trace.  If you have a driver
that takes too long, but eventually suspends, then a panic is
unnecessary and a stack trace that you can see in the logs is better,
especially for a short timeout.

>> @@ -402,13 +422,9 @@ static int dpm_run_callback(pm_callback_t cb, struct device *dev,
>>  static void dpm_wd_handler(unsigned long data)
>>  {
>>       struct dpm_watchdog *wd = (void *)data;
>> -     struct device *dev      = wd->dev;
>> -     struct task_struct *tsk = wd->tsk;
>> -
>> -     dev_emerg(dev, "**** DPM device timeout ****\n");
>> -     show_stack(tsk, NULL);
>>
>> -     BUG();
>> +     dev_emerg(wd->dev, "**** DPM device timeout ****\n");
>> +     dpm_wd_action(wd);
>>  }
>>
>>  /**
>
> And merge this to previous patch. Introducing the code then redoing it
> in next patch does not help review.
>
>                                                                         Pavel
>
> --
> (english) http://www.livejournal.com/~pavelmachek
> (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/