[PATCH V1 6/8] scsi: ufs: rework link start-up process
From: Dolev Raviv
Date: Sun May 12 2013 - 10:25:12 EST
Link start-up requires long time with multiphase handshakes
between UFS host and device. This affects driver's probe time.
This patch let link start-up run asynchronously. Link start-up
will be executed at the end of prove separately.
Along with this change, the following is worked.
Defined completion time of uic command to avoid a permanent wait.
Added mutex to guarantee of uic command at a time.
Adapted some sequence of controller initialization after link statup
according to HCI standard.
Signed-off-by: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
Signed-off-by: Sujit Reddy Thumma <sthumma@xxxxxxxxxxxxxx>
Signed-off-by: Dolev Raviv <draviv@xxxxxxxxxxxxxx>
Tested-by: Maya Erez <merez@xxxxxxxxxxxxxx>
---
Change in v4:
- Addressed late interrupt case (Sujit).
- Move print message in link startup (Maya).
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index f4293d1..333812f 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -33,11 +33,15 @@
* this program.
*/
+#include <linux/async.h>
+
#include "ufshcd.h"
#define UFSHCD_ENABLE_INTRS (UTP_TRANSFER_REQ_COMPL |\
UTP_TASK_REQ_COMPL |\
UFSHCD_ERROR_MASK)
+/* UIC command timeout, unit: ms */
+#define UIC_CMD_TIMEOUT 500
enum {
UFSHCD_MAX_CHANNEL = 0,
@@ -401,24 +405,122 @@ static inline void ufshcd_hba_capabilities(struct ufs_hba *hba)
}
/**
- * ufshcd_send_uic_command - Send UIC commands to unipro layers
+ * ufshcd_ready_for_uic_cmd - Check if controller is ready
+ * to accept UIC commands
* @hba: per adapter instance
- * @uic_command: UIC command
+ * Return true on success, else false
+ */
+static inline bool ufshcd_ready_for_uic_cmd(struct ufs_hba *hba)
+{
+ if (ufshcd_readl(hba, REG_CONTROLLER_STATUS) & UIC_COMMAND_READY)
+ return true;
+ else
+ return false;
+}
+
+/**
+ * ufshcd_dispatch_uic_cmd - Dispatch UIC commands to unipro layers
+ * @hba: per adapter instance
+ * @uic_cmd: UIC command
+ *
+ * Mutex must be held.
*/
static inline void
-ufshcd_send_uic_command(struct ufs_hba *hba, struct uic_command *uic_cmnd)
+ufshcd_dispatch_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd)
{
+ WARN_ON(hba->active_uic_cmd);
+
+ hba->active_uic_cmd = uic_cmd;
+
/* Write Args */
- ufshcd_writel(hba, uic_cmnd->argument1, REG_UIC_COMMAND_ARG_1);
- ufshcd_writel(hba, uic_cmnd->argument2, REG_UIC_COMMAND_ARG_2);
- ufshcd_writel(hba, uic_cmnd->argument3, REG_UIC_COMMAND_ARG_3);
+ ufshcd_writel(hba, uic_cmd->argument1, REG_UIC_COMMAND_ARG_1);
+ ufshcd_writel(hba, uic_cmd->argument2, REG_UIC_COMMAND_ARG_2);
+ ufshcd_writel(hba, uic_cmd->argument3, REG_UIC_COMMAND_ARG_3);
/* Write UIC Cmd */
- ufshcd_writel(hba, uic_cmnd->command & COMMAND_OPCODE_MASK,
+ ufshcd_writel(hba, uic_cmd->command & COMMAND_OPCODE_MASK,
REG_UIC_COMMAND);
}
/**
+ * ufshcd_wait_for_uic_cmd - Wait complectioin of UIC command
+ * @hba: per adapter instance
+ * @uic_command: UIC command
+ *
+ * Must be called with mutex held.
+ * Returns 0 only if success.
+ */
+static int
+ufshcd_wait_for_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd)
+{
+ int ret;
+ unsigned long flags;
+
+ if (wait_for_completion_timeout(&uic_cmd->done,
+ msecs_to_jiffies(UIC_CMD_TIMEOUT)))
+ ret = uic_cmd->argument2 & MASK_UIC_COMMAND_RESULT;
+ else
+ ret = -ETIMEDOUT;
+
+ spin_lock_irqsave(hba->host->host_lock, flags);
+ hba->active_uic_cmd = NULL;
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+
+ return ret;
+}
+
+/**
+ * __ufshcd_send_uic_cmd - Send UIC commands and retrieve the result
+ * @hba: per adapter instance
+ * @uic_cmd: UIC command
+ *
+ * Identical to ufshcd_send_uic_cmd() expect mutex. Must be called
+ * with mutex held.
+ * Returns 0 only if success.
+ */
+static int
+__ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd)
+{
+ int ret;
+ unsigned long flags;
+
+ if (!ufshcd_ready_for_uic_cmd(hba)) {
+ dev_err(hba->dev,
+ "Controller not ready to accept UIC commands\n");
+ return -EIO;
+ }
+
+ init_completion(&uic_cmd->done);
+
+ spin_lock_irqsave(hba->host->host_lock, flags);
+ ufshcd_dispatch_uic_cmd(hba, uic_cmd);
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+
+ ret = ufshcd_wait_for_uic_cmd(hba, uic_cmd);
+
+ return ret;
+}
+
+/**
+ * ufshcd_send_uic_cmd - Send UIC commands and retrieve the result
+ * @hba: per adapter instance
+ * @uic_cmd: UIC command
+ *
+ * Returns 0 only if success.
+ */
+static int
+ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd)
+{
+ int ret;
+
+ mutex_lock(&hba->uic_cmd_mutex);
+ ret = __ufshcd_send_uic_cmd(hba, uic_cmd);
+ mutex_unlock(&hba->uic_cmd_mutex);
+
+ return ret;
+}
+
+/**
* ufshcd_map_sg - Map scatter-gather list to prdt
* @lrbp - pointer to local reference block
*
@@ -858,34 +960,16 @@ static void ufshcd_host_memory_configure(struct ufs_hba *hba)
*/
static int ufshcd_dme_link_startup(struct ufs_hba *hba)
{
- struct uic_command *uic_cmd;
- unsigned long flags;
-
- /* check if controller is ready to accept UIC commands */
- if ((ufshcd_readl(hba, REG_CONTROLLER_STATUS) &
- UIC_COMMAND_READY) == 0x0) {
- dev_err(hba->dev,
- "Controller not ready"
- " to accept UIC commands\n");
- return -EIO;
- }
+ struct uic_command uic_cmd = {0};
+ int ret;
- spin_lock_irqsave(hba->host->host_lock, flags);
+ uic_cmd.command = UIC_CMD_DME_LINK_STARTUP;
- /* form UIC command */
- uic_cmd = &hba->active_uic_cmd;
- uic_cmd->command = UIC_CMD_DME_LINK_STARTUP;
- uic_cmd->argument1 = 0;
- uic_cmd->argument2 = 0;
- uic_cmd->argument3 = 0;
-
- /* enable UIC related interrupts */
- ufshcd_enable_intr(hba, UIC_COMMAND_COMPL);
-
- /* sending UIC commands to controller */
- ufshcd_send_uic_command(hba, uic_cmd);
- spin_unlock_irqrestore(hba->host->host_lock, flags);
- return 0;
+ ret = ufshcd_send_uic_cmd(hba, &uic_cmd);
+ if (ret)
+ dev_err(hba->dev,
+ "dme-link-startup: error code %d\n", ret);
+ return ret;
}
/**
@@ -894,9 +978,10 @@ static int ufshcd_dme_link_startup(struct ufs_hba *hba)
*
* To bring UFS host controller to operational state,
* 1. Check if device is present
- * 2. Configure run-stop-registers
- * 3. Enable required interrupts
- * 4. Configure interrupt aggregation
+ * 2. Enable required interrupts
+ * 3. Configure interrupt aggregation
+ * 4. Program UTRL and UTMRL base addres
+ * 5. Configure run-stop-registers
*
* Returns 0 on success, non-zero value on failure
*/
@@ -913,6 +998,22 @@ static int ufshcd_make_hba_operational(struct ufs_hba *hba)
goto out;
}
+ /* Enable required interrupts */
+ ufshcd_enable_intr(hba, UFSHCD_ENABLE_INTRS);
+
+ /* Configure interrupt aggregation */
+ ufshcd_config_int_aggr(hba, INT_AGGR_CONFIG);
+
+ /* Configure UTRL and UTMRL base address registers */
+ ufshcd_writel(hba, lower_32_bits(hba->utrdl_dma_addr),
+ REG_UTP_TRANSFER_REQ_LIST_BASE_L);
+ ufshcd_writel(hba, upper_32_bits(hba->utrdl_dma_addr),
+ REG_UTP_TRANSFER_REQ_LIST_BASE_H);
+ ufshcd_writel(hba, lower_32_bits(hba->utmrdl_dma_addr),
+ REG_UTP_TASK_REQ_LIST_BASE_L);
+ ufshcd_writel(hba, upper_32_bits(hba->utmrdl_dma_addr),
+ REG_UTP_TASK_REQ_LIST_BASE_H);
+
/*
* UCRDY, UTMRLDY and UTRLRDY bits must be 1
* DEI, HEI bits must be 0
@@ -926,17 +1027,11 @@ static int ufshcd_make_hba_operational(struct ufs_hba *hba)
goto out;
}
- /* Enable required interrupts */
- ufshcd_enable_intr(hba, UFSHCD_ENABLE_INTRS);
-
- /* Configure interrupt aggregation */
- ufshcd_config_int_aggr(hba, INT_AGGR_CONFIG);
-
if (hba->ufshcd_state == UFSHCD_STATE_RESET)
scsi_unblock_requests(hba->host);
hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL;
- scsi_scan_host(hba->host);
+
out:
return err;
}
@@ -1005,34 +1100,28 @@ static int ufshcd_hba_enable(struct ufs_hba *hba)
}
/**
- * ufshcd_initialize_hba - start the initialization process
+ * ufshcd_link_startup - Initialize unipro link startup
* @hba: per adapter instance
*
- * 1. Enable the controller via ufshcd_hba_enable.
- * 2. Program the Transfer Request List Address with the starting address of
- * UTRDL.
- * 3. Program the Task Management Request List Address with starting address
- * of UTMRDL.
- *
- * Returns 0 on success, non-zero value on failure.
+ * Returns 0 for success, non-zero in case of failure
*/
-static int ufshcd_initialize_hba(struct ufs_hba *hba)
+static int ufshcd_link_startup(struct ufs_hba *hba)
{
- if (ufshcd_hba_enable(hba))
- return -EIO;
+ int ret;
- /* Configure UTRL and UTMRL base address registers */
- ufshcd_writel(hba, lower_32_bits(hba->utrdl_dma_addr),
- REG_UTP_TRANSFER_REQ_LIST_BASE_L);
- ufshcd_writel(hba, upper_32_bits(hba->utrdl_dma_addr),
- REG_UTP_TRANSFER_REQ_LIST_BASE_H);
- ufshcd_writel(hba, lower_32_bits(hba->utmrdl_dma_addr),
- REG_UTP_TASK_REQ_LIST_BASE_L);
- ufshcd_writel(hba, upper_32_bits(hba->utmrdl_dma_addr),
- REG_UTP_TASK_REQ_LIST_BASE_H);
+ /* enable UIC related interrupts */
+ ufshcd_enable_intr(hba, UIC_COMMAND_COMPL);
- /* Initialize unipro link startup procedure */
- return ufshcd_dme_link_startup(hba);
+ ret = ufshcd_dme_link_startup(hba);
+ if (ret)
+ goto out;
+
+ ret = ufshcd_make_hba_operational(hba);
+
+out:
+ if (ret)
+ dev_err(hba->dev, "link startup failed %d\n", ret);
+ return ret;
}
/**
@@ -1072,12 +1161,19 @@ static int ufshcd_do_reset(struct ufs_hba *hba)
hba->outstanding_reqs = 0;
hba->outstanding_tasks = 0;
- /* start the initialization process */
- if (ufshcd_initialize_hba(hba)) {
+ /* Host controller enable */
+ if (ufshcd_hba_enable(hba)) {
dev_err(hba->dev,
"Reset: Controller initialization failed\n");
return FAILED;
}
+
+ if (ufshcd_link_startup(hba)) {
+ dev_err(hba->dev,
+ "Reset: Link start-up failed\n");
+ return FAILED;
+ }
+
return SUCCESS;
}
@@ -1330,6 +1426,19 @@ ufshcd_transfer_rsp_status(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
}
/**
+ * ufshcd_uic_cmd_compl - handle completion of uic command
+ * @hba: per adapter instance
+ */
+static void ufshcd_uic_cmd_compl(struct ufs_hba *hba)
+{
+ if (hba->active_uic_cmd) {
+ hba->active_uic_cmd->argument2 |=
+ ufshcd_get_uic_cmd_result(hba);
+ complete(&hba->active_uic_cmd->done);
+ }
+}
+
+/**
* ufshcd_transfer_req_compl - handle SCSI and query command completion
* @hba: per adapter instance
*/
@@ -1369,28 +1478,6 @@ static void ufshcd_transfer_req_compl(struct ufs_hba *hba)
}
/**
- * ufshcd_uic_cc_handler - handle UIC command completion
- * @work: pointer to a work queue structure
- *
- * Returns 0 on success, non-zero value on failure
- */
-static void ufshcd_uic_cc_handler (struct work_struct *work)
-{
- struct ufs_hba *hba;
-
- hba = container_of(work, struct ufs_hba, uic_workq);
-
- if ((hba->active_uic_cmd.command == UIC_CMD_DME_LINK_STARTUP) &&
- !(ufshcd_get_uic_cmd_result(hba))) {
-
- if (ufshcd_make_hba_operational(hba))
- dev_err(hba->dev,
- "cc: hba not operational state\n");
- return;
- }
-}
-
-/**
* ufshcd_fatal_err_handler - handle fatal errors
* @hba: per adapter instance
*/
@@ -1451,7 +1538,7 @@ static void ufshcd_sl_intr(struct ufs_hba *hba, u32 intr_status)
ufshcd_err_handler(hba);
if (intr_status & UIC_COMMAND_COMPL)
- schedule_work(&hba->uic_workq);
+ ufshcd_uic_cmd_compl(hba);
if (intr_status & UTP_TASK_REQ_COMPL)
ufshcd_tmc_handler(hba);
@@ -1674,6 +1761,21 @@ out:
return err;
}
+/**
+ * ufshcd_async_scan - asynchronous execution for link startup
+ * @data: data pointer to pass to this function
+ * @cookie: cookie data
+ */
+static void ufshcd_async_scan(void *data, async_cookie_t cookie)
+{
+ struct ufs_hba *hba = (struct ufs_hba *)data;
+ int ret;
+
+ ret = ufshcd_link_startup(hba);
+ if (!ret)
+ scsi_scan_host(hba->host);
+}
+
static struct scsi_host_template ufshcd_driver_template = {
.module = THIS_MODULE,
.name = UFSHCD,
@@ -1835,12 +1937,14 @@ int ufshcd_init(struct device *dev, struct ufs_hba **hba_handle,
init_waitqueue_head(&hba->ufshcd_tm_wait_queue);
/* Initialize work queues */
- INIT_WORK(&hba->uic_workq, ufshcd_uic_cc_handler);
INIT_WORK(&hba->feh_workq, ufshcd_fatal_err_handler);
/* Initialize mutex for query requests */
mutex_init(&hba->query.lock_ufs_query);
+ /* Initialize UIC command mutex */
+ mutex_init(&hba->uic_cmd_mutex);
+
/* IRQ registration */
err = request_irq(irq, ufshcd_intr, IRQF_SHARED, UFSHCD, hba);
if (err) {
@@ -1861,14 +1965,17 @@ int ufshcd_init(struct device *dev, struct ufs_hba **hba_handle,
goto out_free_irq;
}
- /* Initialization routine */
- err = ufshcd_initialize_hba(hba);
+ /* Host controller enable */
+ err = ufshcd_hba_enable(hba);
if (err) {
- dev_err(hba->dev, "Initialization failed\n");
+ dev_err(hba->dev, "Host controller enable failed\n");
goto out_remove_scsi_host;
}
+
*hba_handle = hba;
+ async_schedule(ufshcd_async_scan, hba);
+
return 0;
out_remove_scsi_host:
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index d98e046..974bd07 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -51,6 +51,7 @@
#include <linux/bitops.h>
#include <linux/pm_runtime.h>
#include <linux/clk.h>
+#include <linux/completion.h>
#include <asm/irq.h>
#include <asm/byteorder.h>
@@ -76,6 +77,7 @@
* @argument3: UIC command argument 3
* @cmd_active: Indicate if UIC command is outstanding
* @result: UIC command result
+ * @done: UIC command completion
*/
struct uic_command {
u32 command;
@@ -84,6 +86,7 @@ struct uic_command {
u32 argument3;
int cmd_active;
int result;
+ struct completion done;
};
/**
@@ -150,11 +153,11 @@ struct ufs_query {
* @ufs_version: UFS Version to which controller complies
* @irq: Irq number of the controller
* @active_uic_cmd: handle of active UIC command
+ * @uic_cmd_mutex: mutex for uic command
* @ufshcd_tm_wait_queue: wait queue for task management
* @tm_condition: condition variable for task management
* @ufshcd_state: UFSHCD states
* @intr_mask: Interrupt Mask Bits
- * @uic_workq: Work queue for UIC completion handling
* @feh_workq: Work queue for fatal controller error handling
* @errors: HBA errors
* @query: query request information
@@ -186,7 +189,9 @@ struct ufs_hba {
u32 ufs_version;
unsigned int irq;
- struct uic_command active_uic_cmd;
+ struct uic_command *active_uic_cmd;
+ struct mutex uic_cmd_mutex;
+
wait_queue_head_t ufshcd_tm_wait_queue;
unsigned long tm_condition;
@@ -194,7 +199,6 @@ struct ufs_hba {
u32 intr_mask;
/* Work Queues */
- struct work_struct uic_workq;
struct work_struct feh_workq;
/* HBA Errors */
--
1.7.6
--
QUALCOMM ISRAEL, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/