[PATCH v2 5/5] clk: zynq: Remove deprecated clock code
From: Soren Brinkmann
Date: Mon May 13 2013 - 13:47:39 EST
Signed-off-by: Soren Brinkmann <soren.brinkmann@xxxxxxxxxx>
Cc: Grant Likely <grant.likely@xxxxxxxxxx>
Cc: Rob Herring <rob.herring@xxxxxxxxxxx>
Cc: Rob Landley <rob@xxxxxxxxxxx>
Cc: devicetree-discuss@xxxxxxxxxxxxxxxx
Cc: linux-doc@xxxxxxxxxxxxxxx
---
.../devicetree/bindings/clock/zynq-7000.txt | 49 ---
drivers/clk/clk-zynq.c | 378 ---------------------
2 files changed, 427 deletions(-)
delete mode 100644 drivers/clk/clk-zynq.c
diff --git a/Documentation/devicetree/bindings/clock/zynq-7000.txt b/Documentation/devicetree/bindings/clock/zynq-7000.txt
index 30bfca9..b013ec6 100644
--- a/Documentation/devicetree/bindings/clock/zynq-7000.txt
+++ b/Documentation/devicetree/bindings/clock/zynq-7000.txt
@@ -102,52 +102,3 @@ Example:
clocks = <&clkc 16>, <&clk_foo>;
clock-names = "gem1_emio_clk", "can_mio_clk_23";
};
-
-
-== PLLs ==
-
-Used to describe the ARM_PLL, DDR_PLL, and IO_PLL.
-
-Required properties:
-- #clock-cells : shall be 0 (only one clock is output from this node)
-- compatible : "xlnx,zynq-pll"
-- reg : pair of u32 values, which are the address offsets within the SLCR
- of the relevant PLL_CTRL register and PLL_CFG register respectively
-- clocks : phandle for parent clock. should be the phandle for ps_clk
-
-Optional properties:
-- clock-output-names : name of the output clock
-
-Example:
- armpll: armpll {
- #clock-cells = <0>;
- compatible = "xlnx,zynq-pll";
- clocks = <&ps_clk>;
- reg = <0x100 0x110>;
- clock-output-names = "armpll";
- };
-
-== Peripheral clocks ==
-
-Describes clock node for the SDIO, SMC, SPI, QSPI, and UART clocks.
-
-Required properties:
-- #clock-cells : shall be 1
-- compatible : "xlnx,zynq-periph-clock"
-- reg : a single u32 value, describing the offset within the SLCR where
- the CLK_CTRL register is found for this peripheral
-- clocks : phandle for parent clocks. should hold phandles for
- the IO_PLL, ARM_PLL, and DDR_PLL in order
-- clock-output-names : names of the output clock(s). For peripherals that have
- two output clocks (for example, the UART), two clocks
- should be listed.
-
-Example:
- uart_clk: uart_clk {
- #clock-cells = <1>;
- compatible = "xlnx,zynq-periph-clock";
- clocks = <&iopll &armpll &ddrpll>;
- reg = <0x154>;
- clock-output-names = "uart0_ref_clk",
- "uart1_ref_clk";
- };
diff --git a/drivers/clk/clk-zynq.c b/drivers/clk/clk-zynq.c
deleted file mode 100644
index 3206297..0000000
--- a/drivers/clk/clk-zynq.c
+++ /dev/null
@@ -1,378 +0,0 @@
-/*
- * Copyright (c) 2012 National Instruments
- *
- * Josh Cartwright <josh.cartwright@xxxxxx>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/slab.h>
-#include <linux/kernel.h>
-#include <linux/clk-provider.h>
-#include <linux/clk/zynq.h>
-
-static void __iomem *slcr_base;
-
-struct zynq_pll_clk {
- struct clk_hw hw;
- void __iomem *pll_ctrl;
- void __iomem *pll_cfg;
-};
-
-#define to_zynq_pll_clk(hw) container_of(hw, struct zynq_pll_clk, hw)
-
-#define CTRL_PLL_FDIV(x) ((x) >> 12)
-
-static unsigned long zynq_pll_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- struct zynq_pll_clk *pll = to_zynq_pll_clk(hw);
- return parent_rate * CTRL_PLL_FDIV(ioread32(pll->pll_ctrl));
-}
-
-static const struct clk_ops zynq_pll_clk_ops = {
- .recalc_rate = zynq_pll_recalc_rate,
-};
-
-static void __init zynq_pll_clk_setup(struct device_node *np)
-{
- struct clk_init_data init;
- struct zynq_pll_clk *pll;
- const char *parent_name;
- struct clk *clk;
- u32 regs[2];
- int ret;
-
- ret = of_property_read_u32_array(np, "reg", regs, ARRAY_SIZE(regs));
- if (WARN_ON(ret))
- return;
-
- pll = kzalloc(sizeof(*pll), GFP_KERNEL);
- if (WARN_ON(!pll))
- return;
-
- pll->pll_ctrl = slcr_base + regs[0];
- pll->pll_cfg = slcr_base + regs[1];
-
- of_property_read_string(np, "clock-output-names", &init.name);
-
- init.ops = &zynq_pll_clk_ops;
- parent_name = of_clk_get_parent_name(np, 0);
- init.parent_names = &parent_name;
- init.num_parents = 1;
-
- pll->hw.init = &init;
-
- clk = clk_register(NULL, &pll->hw);
- if (WARN_ON(IS_ERR(clk)))
- return;
-
- ret = of_clk_add_provider(np, of_clk_src_simple_get, clk);
- if (WARN_ON(ret))
- return;
-}
-CLK_OF_DECLARE(zynq_pll, "xlnx,zynq-pll", zynq_pll_clk_setup);
-
-struct zynq_periph_clk {
- struct clk_hw hw;
- struct clk_onecell_data onecell_data;
- struct clk *gates[2];
- void __iomem *clk_ctrl;
- spinlock_t clkact_lock;
-};
-
-#define to_zynq_periph_clk(hw) container_of(hw, struct zynq_periph_clk, hw)
-
-static const u8 periph_clk_parent_map[] = {
- 0, 0, 1, 2
-};
-#define PERIPH_CLK_CTRL_SRC(x) (periph_clk_parent_map[((x) & 0x30) >> 4])
-#define PERIPH_CLK_CTRL_DIV(x) (((x) & 0x3F00) >> 8)
-
-static unsigned long zynq_periph_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- struct zynq_periph_clk *periph = to_zynq_periph_clk(hw);
- return parent_rate / PERIPH_CLK_CTRL_DIV(ioread32(periph->clk_ctrl));
-}
-
-static u8 zynq_periph_get_parent(struct clk_hw *hw)
-{
- struct zynq_periph_clk *periph = to_zynq_periph_clk(hw);
- return PERIPH_CLK_CTRL_SRC(ioread32(periph->clk_ctrl));
-}
-
-static const struct clk_ops zynq_periph_clk_ops = {
- .recalc_rate = zynq_periph_recalc_rate,
- .get_parent = zynq_periph_get_parent,
-};
-
-static void __init zynq_periph_clk_setup(struct device_node *np)
-{
- struct zynq_periph_clk *periph;
- const char *parent_names[3];
- struct clk_init_data init;
- int clk_num = 0, err;
- const char *name;
- struct clk *clk;
- u32 reg;
- int i;
-
- err = of_property_read_u32(np, "reg", ®);
- if (WARN_ON(err))
- return;
-
- periph = kzalloc(sizeof(*periph), GFP_KERNEL);
- if (WARN_ON(!periph))
- return;
-
- periph->clk_ctrl = slcr_base + reg;
- spin_lock_init(&periph->clkact_lock);
-
- init.name = np->name;
- init.ops = &zynq_periph_clk_ops;
- for (i = 0; i < ARRAY_SIZE(parent_names); i++)
- parent_names[i] = of_clk_get_parent_name(np, i);
- init.parent_names = parent_names;
- init.num_parents = ARRAY_SIZE(parent_names);
-
- periph->hw.init = &init;
-
- clk = clk_register(NULL, &periph->hw);
- if (WARN_ON(IS_ERR(clk)))
- return;
-
- err = of_clk_add_provider(np, of_clk_src_simple_get, clk);
- if (WARN_ON(err))
- return;
-
- err = of_property_read_string_index(np, "clock-output-names", 0,
- &name);
- if (WARN_ON(err))
- return;
-
- periph->gates[0] = clk_register_gate(NULL, name, np->name, 0,
- periph->clk_ctrl, 0, 0,
- &periph->clkact_lock);
- if (WARN_ON(IS_ERR(periph->gates[0])))
- return;
- clk_num++;
-
- /* some periph clks have 2 downstream gates */
- err = of_property_read_string_index(np, "clock-output-names", 1,
- &name);
- if (err != -ENODATA) {
- periph->gates[1] = clk_register_gate(NULL, name, np->name, 0,
- periph->clk_ctrl, 1, 0,
- &periph->clkact_lock);
- if (WARN_ON(IS_ERR(periph->gates[1])))
- return;
- clk_num++;
- }
-
- periph->onecell_data.clks = periph->gates;
- periph->onecell_data.clk_num = clk_num;
-
- err = of_clk_add_provider(np, of_clk_src_onecell_get,
- &periph->onecell_data);
- if (WARN_ON(err))
- return;
-}
-CLK_OF_DECLARE(zynq_periph, "xlnx,zynq-periph-clock", zynq_periph_clk_setup);
-
-/* CPU Clock domain is modelled as a mux with 4 children subclks, whose
- * derivative rates depend on CLK_621_TRUE
- */
-
-struct zynq_cpu_clk {
- struct clk_hw hw;
- struct clk_onecell_data onecell_data;
- struct clk *subclks[4];
- void __iomem *clk_ctrl;
- spinlock_t clkact_lock;
-};
-
-#define to_zynq_cpu_clk(hw) container_of(hw, struct zynq_cpu_clk, hw)
-
-static const u8 zynq_cpu_clk_parent_map[] = {
- 1, 1, 2, 0
-};
-#define CPU_CLK_SRCSEL(x) (zynq_cpu_clk_parent_map[(((x) & 0x30) >> 4)])
-#define CPU_CLK_CTRL_DIV(x) (((x) & 0x3F00) >> 8)
-
-static u8 zynq_cpu_clk_get_parent(struct clk_hw *hw)
-{
- struct zynq_cpu_clk *cpuclk = to_zynq_cpu_clk(hw);
- return CPU_CLK_SRCSEL(ioread32(cpuclk->clk_ctrl));
-}
-
-static unsigned long zynq_cpu_clk_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- struct zynq_cpu_clk *cpuclk = to_zynq_cpu_clk(hw);
- return parent_rate / CPU_CLK_CTRL_DIV(ioread32(cpuclk->clk_ctrl));
-}
-
-static const struct clk_ops zynq_cpu_clk_ops = {
- .get_parent = zynq_cpu_clk_get_parent,
- .recalc_rate = zynq_cpu_clk_recalc_rate,
-};
-
-struct zynq_cpu_subclk {
- struct clk_hw hw;
- void __iomem *clk_621;
- enum {
- CPU_SUBCLK_6X4X,
- CPU_SUBCLK_3X2X,
- CPU_SUBCLK_2X,
- CPU_SUBCLK_1X,
- } which;
-};
-
-#define CLK_621_TRUE(x) ((x) & 1)
-
-#define to_zynq_cpu_subclk(hw) container_of(hw, struct zynq_cpu_subclk, hw);
-
-static unsigned long zynq_cpu_subclk_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- unsigned long uninitialized_var(rate);
- struct zynq_cpu_subclk *subclk;
- bool is_621;
-
- subclk = to_zynq_cpu_subclk(hw)
- is_621 = CLK_621_TRUE(ioread32(subclk->clk_621));
-
- switch (subclk->which) {
- case CPU_SUBCLK_6X4X:
- rate = parent_rate;
- break;
- case CPU_SUBCLK_3X2X:
- rate = parent_rate / 2;
- break;
- case CPU_SUBCLK_2X:
- rate = parent_rate / (is_621 ? 3 : 2);
- break;
- case CPU_SUBCLK_1X:
- rate = parent_rate / (is_621 ? 6 : 4);
- break;
- };
-
- return rate;
-}
-
-static const struct clk_ops zynq_cpu_subclk_ops = {
- .recalc_rate = zynq_cpu_subclk_recalc_rate,
-};
-
-static struct clk *zynq_cpu_subclk_setup(struct device_node *np, u8 which,
- void __iomem *clk_621)
-{
- struct zynq_cpu_subclk *subclk;
- struct clk_init_data init;
- struct clk *clk;
- int err;
-
- err = of_property_read_string_index(np, "clock-output-names",
- which, &init.name);
- if (WARN_ON(err))
- goto err_read_output_name;
-
- subclk = kzalloc(sizeof(*subclk), GFP_KERNEL);
- if (!subclk)
- goto err_subclk_alloc;
-
- subclk->clk_621 = clk_621;
- subclk->which = which;
-
- init.ops = &zynq_cpu_subclk_ops;
- init.parent_names = &np->name;
- init.num_parents = 1;
-
- subclk->hw.init = &init;
-
- clk = clk_register(NULL, &subclk->hw);
- if (WARN_ON(IS_ERR(clk)))
- goto err_clk_register;
-
- return clk;
-
-err_clk_register:
- kfree(subclk);
-err_subclk_alloc:
-err_read_output_name:
- return ERR_PTR(-EINVAL);
-}
-
-static void __init zynq_cpu_clk_setup(struct device_node *np)
-{
- struct zynq_cpu_clk *cpuclk;
- const char *parent_names[3];
- struct clk_init_data init;
- void __iomem *clk_621;
- struct clk *clk;
- u32 reg[2];
- int err;
- int i;
-
- err = of_property_read_u32_array(np, "reg", reg, ARRAY_SIZE(reg));
- if (WARN_ON(err))
- return;
-
- cpuclk = kzalloc(sizeof(*cpuclk), GFP_KERNEL);
- if (WARN_ON(!cpuclk))
- return;
-
- cpuclk->clk_ctrl = slcr_base + reg[0];
- clk_621 = slcr_base + reg[1];
- spin_lock_init(&cpuclk->clkact_lock);
-
- init.name = np->name;
- init.ops = &zynq_cpu_clk_ops;
- for (i = 0; i < ARRAY_SIZE(parent_names); i++)
- parent_names[i] = of_clk_get_parent_name(np, i);
- init.parent_names = parent_names;
- init.num_parents = ARRAY_SIZE(parent_names);
-
- cpuclk->hw.init = &init;
-
- clk = clk_register(NULL, &cpuclk->hw);
- if (WARN_ON(IS_ERR(clk)))
- return;
-
- err = of_clk_add_provider(np, of_clk_src_simple_get, clk);
- if (WARN_ON(err))
- return;
-
- for (i = 0; i < 4; i++) {
- cpuclk->subclks[i] = zynq_cpu_subclk_setup(np, i, clk_621);
- if (WARN_ON(IS_ERR(cpuclk->subclks[i])))
- return;
- }
-
- cpuclk->onecell_data.clks = cpuclk->subclks;
- cpuclk->onecell_data.clk_num = i;
-
- err = of_clk_add_provider(np, of_clk_src_onecell_get,
- &cpuclk->onecell_data);
- if (WARN_ON(err))
- return;
-}
-CLK_OF_DECLARE(zynq_cpu, "xlnx,zynq-cpu-clock", zynq_cpu_clk_setup);
-
-void __init xilinx_zynq_clocks_init(void __iomem *slcr)
-{
- slcr_base = slcr;
- of_clk_init(NULL);
-}
--
1.8.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/