[PATCHv3 1/4] Documentation: Add memory mapped ARM architected timer binding

[Stephen Boyd]

Add a binding for the arm architected timer hardware's memory
mapped interface. The mmio timer hardware is made up of one base
frame and a collection of up to 8 timer frames, where each of the
8 timer frames can have either one or two views. A frame
typically maps to a privilege level (user/kernel, hypervisor,
secure). The first view has full access to the registers within a
frame, while the second view can be restricted to particular
registers within a frame. Each frame must support a physical
timer. It's optional for a frame to support a virtual timer.

Cc: devicetree-discuss@xxxxxxxxxxxxxxxx
Cc: Marc Zyngier <Marc.Zyngier@xxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Cc: Rob Herring <robherring2@xxxxxxxxx>
Signed-off-by: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
---
 .../devicetree/bindings/arm/arch_timer.txt         | 59 ++++++++++++++++++++--
 1 file changed, 56 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/arch_timer.txt b/Documentation/devicetree/bindings/arm/arch_timer.txt
index 20746e5..06fc760 100644
--- a/Documentation/devicetree/bindings/arm/arch_timer.txt
+++ b/Documentation/devicetree/bindings/arm/arch_timer.txt
@@ -1,10 +1,14 @@
 * ARM architected timer
 
-ARM cores may have a per-core architected timer, which provides per-cpu timers.
+ARM cores may have a per-core architected timer, which provides per-cpu timers,
+or a memory mapped architected timer, which provides up to 8 frames with a
+physical and optional virtual timer per frame.
 
-The timer is attached to a GIC to deliver its per-processor interrupts.
+The per-core architected timer is attached to a GIC to deliver its
+per-processor interrupts via PPIs. The memory mapped timer is attached to a GIC
+to deliver its interrupts via SPIs.
 
-** Timer node properties:
+** CP15 Timer node properties:
 
 - compatible : Should at least contain one of
 	"arm,armv7-timer"
@@ -26,3 +30,52 @@ Example:
 			     <1 10 0xf08>;
 		clock-frequency = <100000000>;
 	};
+
+** Memory mapped timer node properties:
+
+- compatible : Should at least contain "arm,armv7-timer-mem".
+
+- clock-frequency : The frequency of the main counter, in Hz. Optional.
+
+- reg : The control frame base address.
+
+Note that #address-cells, #size-cells, and ranges shall be present to ensure
+the CPU can address a frame's registers.
+
+A timer node has up to 8 frame sub-nodes, each with the following properties:
+
+- frame-number: 0 to 7.
+
+- interrupts : Interrupt list for physical and virtual timers in that order.
+  The virtual timer interrupt is optional.
+
+- reg : The first and second view base addresses in that order. The second view
+  base address is optional.
+
+- status : "disabled" indicates the frame is not available for use. Optional.
+
+Example:
+
+	timer@f0000000 {
+		compatible = "arm,armv7-timer-mem";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		reg = <0xf0000000 0x1000>;
+		clock-frequency = <50000000>;
+
+		frame@f0001000 {
+			frame-number = <0>
+			interrupts = <0 13 0x8>,
+				     <0 14 0x8>;
+			reg = <0xf0001000 0x1000>,
+			      <0xf0002000 0x1000>;
+		};
+
+		frame@f0003000 {
+			frame-number = <1>
+			interrupts = <0 15 0x8>;
+			reg = <0xf0003000 0x1000>;
+			status = "disabled";
+		};
+	};
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/