Re: [PATCH v5 00/11] mtd: add datasheet's ECC information tonand_chip{}

[Artem Bityutskiy]

On Wed, 2013-05-15 at 16:40 +0800, Huang Shijie wrote:
> 1.) Why add the ECC information to the nand_chip{} ?
>    Each nand chip has its requirement for the ECC correctability, such as
>    "4bit ECC for each 512Byte" or "40bit ECC for each 1024Byte".
>    This ECC info is very important to the nand controller, such as gpmi.
> 
>    Take the Micron MT29F64G08CBABA for example, its geometry is
>    8k page size, 744 bytes oob size and it requires 40bit ECC per 1K bytes.
>    If we do not provide the ECC info to the gpmi nand driver, it has to
>    calculate the ECC correctability itself. The gpmi driver will gets the 56bit
>    ECC for per 1K bytes which is beyond its BCH's 40bit ecc capibility.
>    The gpmi will quits in this case. But in actually, the gpmi can supports
>    this nand chip if it can get the right ECC info.

Thanks. Brian has disappeared, may be busy, but I would still like to
wait for his response. At the very least, I would like to make sure he
does not object.

-- 
Best Regards,
Artem Bityutskiy

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/