Re: [PATCHv2] Add TI-Nspire timer support

[Daniel Lezcano]

On 06/01/2013 08:02 AM, Daniel Tang wrote:
> This patch adds a clocksource/clockevent driver for the timer found on some models in the TI-Nspire calculator series.
> 
> The timer has two 16bit subtimers within its memory mapped I/O interface but only the first can generate interrupts. 
> 
> The first subtimer is used to generate clockevents but only if an interrupt number and register is given.
> 
> The interrupt acknowledgement mechanism is a little strange because the interrupt mask and acknowledge registers are located in another memory mapped I/O peripheral. The address of this register is passed to the driver through device tree bindings.
> 
> The second subtimer is used as a clocksource because it isn't capable of generating an interrupt. This subtimer is always added.
> 
> Changes between v2 and v1:
> * Added a changelog
> * Moved `int irqnr` out of struct zevio_timer and into the init function
> * Set timer->clkevt.irq to the IRQ number in init function
> * Added spaces in the shift macros (i.e. (1<<2) => (1 << 2))
> * Realigned function declarations, container_of and at timer->clkevt.
> * Remove unnecessary calls to local_irq_save and local_irq_restore
> * Remove redundant setting of dev->mode
> * Change kzalloc call to use GFP_KERNEL
> * Remove redundant line break
> * Remove IRQF_DISABLED flag
> 
> Cheers,
> Daniel Tang
> 
> Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
> Signed-off-by: Daniel Tang <dt.tangr@xxxxxxxxx>
> ---

The patch sounds good for me. If nobody complains, I will queue it for 3.11.

Please in the future, add the subsystem name in the subject line as:

clocksource: Add TI-Nspire timer ...

Thanks
  -- Daniel

>  .../devicetree/bindings/timer/lsi,zevio-timer.txt  |  33 ++++
>  drivers/clocksource/Makefile                       |   1 +
>  drivers/clocksource/zevio-timer.c                  | 215 +++++++++++++++++++++
>  3 files changed, 249 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/timer/lsi,zevio-timer.txt
>  create mode 100644 drivers/clocksource/zevio-timer.c
> 
> diff --git a/Documentation/devicetree/bindings/timer/lsi,zevio-timer.txt b/Documentation/devicetree/bindings/timer/lsi,zevio-timer.txt
> new file mode 100644
> index 0000000..b2d07ad
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/timer/lsi,zevio-timer.txt
> @@ -0,0 +1,33 @@
> +TI-NSPIRE timer
> +
> +Required properties:
> +
> +- compatible : should be "lsi,zevio-timer".
> +- reg : The physical base address and size of the timer (always first).
> +- clocks: phandle to the source clock.
> +
> +Optional properties:
> +
> +- interrupts : The interrupt number of the first timer.
> +- reg : The interrupt acknowledgement registers
> +	(always after timer base address)
> +
> +If any of the optional properties are not given, the timer is added as a
> +clock-source only.
> +
> +Example:
> +
> +timer {
> +	compatible = "lsi,zevio-timer";
> +	reg = <0x900D0000 0x1000>, <0x900A0020 0x8>;
> +	interrupts = <19>;
> +	clocks = <&timer_clk>;
> +};
> +
> +Example (no clock-events):
> +
> +timer {
> +	compatible = "lsi,zevio-timer";
> +	reg = <0x900D0000 0x1000>;
> +	clocks = <&timer_clk>;
> +};
> diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
> index 8d979c7..293f86e 100644
> --- a/drivers/clocksource/Makefile
> +++ b/drivers/clocksource/Makefile
> @@ -22,6 +22,7 @@ obj-$(CONFIG_ARCH_PRIMA2)	+= timer-prima2.o
>  obj-$(CONFIG_SUN4I_TIMER)	+= sun4i_timer.o
>  obj-$(CONFIG_ARCH_TEGRA)	+= tegra20_timer.o
>  obj-$(CONFIG_VT8500_TIMER)	+= vt8500_timer.o
> +obj-$(CONFIG_ARCH_NSPIRE)	+= zevio-timer.o
>  obj-$(CONFIG_ARCH_BCM)		+= bcm_kona_timer.o
>  obj-$(CONFIG_CADENCE_TTC_TIMER)	+= cadence_ttc_timer.o
>  obj-$(CONFIG_CLKSRC_EXYNOS_MCT)	+= exynos_mct.o
> diff --git a/drivers/clocksource/zevio-timer.c b/drivers/clocksource/zevio-timer.c
> new file mode 100644
> index 0000000..ca81809
> --- /dev/null
> +++ b/drivers/clocksource/zevio-timer.c
> @@ -0,0 +1,215 @@
> +/*
> + *  linux/drivers/clocksource/zevio-timer.c
> + *
> + *  Copyright (C) 2013 Daniel Tang <tangrs@xxxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2, as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <linux/io.h>
> +#include <linux/irq.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/clk.h>
> +#include <linux/clockchips.h>
> +#include <linux/cpumask.h>
> +#include <linux/interrupt.h>
> +#include <linux/slab.h>
> +
> +#define IO_CURRENT_VAL	0x00
> +#define IO_DIVIDER	0x04
> +#define IO_CONTROL	0x08
> +
> +#define IO_TIMER1	0x00
> +#define IO_TIMER2	0x0C
> +
> +#define IO_MATCH_BEGIN	0x18
> +#define IO_MATCH(x)	(IO_MATCH_BEGIN + ((x) << 2))
> +
> +#define IO_INTR_STS	0x00
> +#define IO_INTR_ACK	0x00
> +#define IO_INTR_MSK	0x04
> +
> +#define CNTL_STOP_TIMER	(1 << 4)
> +#define CNTL_RUN_TIMER	(0 << 4)
> +
> +#define CNTL_INC	(1 << 3)
> +#define CNTL_DEC	(0 << 3)
> +
> +#define CNTL_TOZERO	0
> +#define CNTL_MATCH(x)	((x) + 1)
> +#define CNTL_FOREVER	7
> +
> +/* There are 6 match registers but we only use one. */
> +#define TIMER_MATCH	0
> +
> +#define TIMER_INTR_MSK	(1 << (TIMER_MATCH))
> +#define TIMER_INTR_ALL	0x3F
> +
> +struct zevio_timer {
> +	void __iomem *base;
> +	void __iomem *timer1, *timer2;
> +	void __iomem *interrupt_regs;
> +
> +	struct clk *clk;
> +	struct clock_event_device clkevt;
> +	struct irqaction clkevt_irq;
> +
> +	char clocksource_name[64];
> +	char clockevent_name[64];
> +};
> +
> +static int zevio_timer_set_event(unsigned long delta,
> +				 struct clock_event_device *dev)
> +{
> +	struct zevio_timer *timer = container_of(dev, struct zevio_timer,
> +						 clkevt);
> +
> +	writel(delta, timer->timer1 + IO_CURRENT_VAL);
> +	writel(CNTL_RUN_TIMER | CNTL_DEC | CNTL_MATCH(TIMER_MATCH),
> +			timer->timer1 + IO_CONTROL);
> +
> +	return 0;
> +}
> +
> +static void zevio_timer_set_mode(enum clock_event_mode mode,
> +				 struct clock_event_device *dev)
> +{
> +	struct zevio_timer *timer = container_of(dev, struct zevio_timer,
> +						 clkevt);
> +
> +	switch (mode) {
> +	case CLOCK_EVT_MODE_RESUME:
> +	case CLOCK_EVT_MODE_ONESHOT:
> +		/* Enable timer interrupts */
> +		writel(TIMER_INTR_MSK, timer->interrupt_regs + IO_INTR_MSK);
> +		writel(TIMER_INTR_ALL, timer->interrupt_regs + IO_INTR_ACK);
> +		break;
> +	case CLOCK_EVT_MODE_SHUTDOWN:
> +	case CLOCK_EVT_MODE_UNUSED:
> +		/* Disable timer interrupts */
> +		writel(0, timer->interrupt_regs + IO_INTR_MSK);
> +		writel(TIMER_INTR_ALL, timer->interrupt_regs + IO_INTR_ACK);
> +		/* Stop timer */
> +		writel(CNTL_STOP_TIMER, timer->timer1 + IO_CONTROL);
> +		break;
> +	case CLOCK_EVT_MODE_PERIODIC:
> +	default:
> +		/* Unsupported */
> +		break;
> +	}
> +}
> +
> +static irqreturn_t zevio_timer_interrupt(int irq, void *dev_id)
> +{
> +	struct zevio_timer *timer = dev_id;
> +	u32 intr;
> +
> +	intr = readl(timer->interrupt_regs + IO_INTR_ACK);
> +	if (!(intr & TIMER_INTR_MSK))
> +		return IRQ_NONE;
> +
> +	writel(TIMER_INTR_MSK, timer->interrupt_regs + IO_INTR_ACK);
> +	writel(CNTL_STOP_TIMER, timer->timer1 + IO_CONTROL);
> +
> +	if (timer->clkevt.event_handler)
> +		timer->clkevt.event_handler(&timer->clkevt);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int __init zevio_timer_add(struct device_node *node)
> +{
> +	struct zevio_timer *timer;
> +	struct resource res;
> +	int irqnr, ret;
> +
> +	timer = kzalloc(sizeof(*timer), GFP_KERNEL);
> +	if (!timer)
> +		return -ENOMEM;
> +
> +	timer->base = of_iomap(node, 0);
> +	if (!timer->base) {
> +		ret = -EINVAL;
> +		goto error_free;
> +	}
> +	timer->timer1 = timer->base + IO_TIMER1;
> +	timer->timer2 = timer->base + IO_TIMER2;
> +
> +	timer->clk = of_clk_get(node, 0);
> +	if (IS_ERR(timer->clk)) {
> +		ret = PTR_ERR(timer->clk);
> +		pr_err("Timer clock not found! (error %d)\n", ret);
> +		goto error_unmap;
> +	}
> +
> +	timer->interrupt_regs = of_iomap(node, 1);
> +	irqnr = irq_of_parse_and_map(node, 0);
> +
> +	of_address_to_resource(node, 0, &res);
> +	scnprintf(timer->clocksource_name, sizeof(timer->clocksource_name),
> +			"%llx.%s_clocksource",
> +			(unsigned long long)res.start, node->name);
> +
> +	scnprintf(timer->clockevent_name, sizeof(timer->clockevent_name),
> +			"%llx.%s_clockevent",
> +			(unsigned long long)res.start, node->name);
> +
> +	if (timer->interrupt_regs && irqnr) {
> +		timer->clkevt.name		= timer->clockevent_name;
> +		timer->clkevt.set_next_event	= zevio_timer_set_event;
> +		timer->clkevt.set_mode		= zevio_timer_set_mode;
> +		timer->clkevt.rating		= 200;
> +		timer->clkevt.cpumask		= cpu_all_mask;
> +		timer->clkevt.features		= CLOCK_EVT_FEAT_ONESHOT;
> +		timer->clkevt.irq		= irqnr;
> +
> +		writel(CNTL_STOP_TIMER, timer->timer1 + IO_CONTROL);
> +		writel(0, timer->timer1 + IO_DIVIDER);
> +
> +		/* Start with timer interrupts disabled */
> +		writel(0, timer->interrupt_regs + IO_INTR_MSK);
> +		writel(TIMER_INTR_ALL, timer->interrupt_regs + IO_INTR_ACK);
> +
> +		/* Interrupt to occur when timer value matches 0 */
> +		writel(0, timer->base + IO_MATCH(TIMER_MATCH));
> +
> +		timer->clkevt_irq.name		= timer->clockevent_name;
> +		timer->clkevt_irq.handler	= zevio_timer_interrupt;
> +		timer->clkevt_irq.dev_id	= timer;
> +		timer->clkevt_irq.flags		= IRQF_TIMER | IRQF_IRQPOLL;
> +
> +		setup_irq(irqnr, &timer->clkevt_irq);
> +
> +		clockevents_config_and_register(&timer->clkevt,
> +				clk_get_rate(timer->clk), 0x0001, 0xffff);
> +		pr_info("Added %s as clockevent\n", timer->clockevent_name);
> +	}
> +
> +	writel(CNTL_STOP_TIMER, timer->timer2 + IO_CONTROL);
> +	writel(0, timer->timer2 + IO_CURRENT_VAL);
> +	writel(0, timer->timer2 + IO_DIVIDER);
> +	writel(CNTL_RUN_TIMER | CNTL_FOREVER | CNTL_INC,
> +			timer->timer2 + IO_CONTROL);
> +
> +	clocksource_mmio_init(timer->timer2 + IO_CURRENT_VAL,
> +			timer->clocksource_name,
> +			clk_get_rate(timer->clk),
> +			200, 16,
> +			clocksource_mmio_readw_up);
> +
> +	pr_info("Added %s as clocksource\n", timer->clocksource_name);
> +
> +	return 0;
> +error_unmap:
> +	iounmap(timer->base);
> +error_free:
> +	kfree(timer);
> +	return ret;
> +}
> +
> +CLOCKSOURCE_OF_DECLARE(zevio_timer, "lsi,zevio-timer", zevio_timer_add);
> 


-- 
 <http://www.linaro.org/> Linaro.org â Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/