Re: [PATCH 1/2] spi: atmel: convert to dma_request_slave_channel_compat()
From: Richard Genoud
Date: Mon Jun 03 2013 - 06:31:49 EST
2013/6/3 Ludovic Desroches <ludovic.desroches@xxxxxxxxx>:
> On Fri, May 31, 2013 at 05:01:59PM +0200, Richard Genoud wrote:
>> Use generic DMA DT helper.
>> Platforms booting with or without DT populated are both supported.
>>
>> Based on Ludovic Desroches <ludovic.desroches@xxxxxxxxx> patchset
>> "ARM: at91: move to generic DMA device tree binding"
>>
>> Signed-off-by: Richard Genoud <richard.genoud@xxxxxxxxx>
>
> Looks fine for me to so
> Acked-by: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
>
> One comment below
>
Response below.
>> ---
>> drivers/spi/spi-atmel.c | 42 +++++++++++++++++++++++++++---------------
>> 1 file changed, 27 insertions(+), 15 deletions(-)
>>
>> rebased on linux-next next-20130531
>>
>> diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
>> index 31cfc87..ea1ec00 100644
>> --- a/drivers/spi/spi-atmel.c
>> +++ b/drivers/spi/spi-atmel.c
>> @@ -424,10 +424,15 @@ static int atmel_spi_dma_slave_config(struct atmel_spi *as,
>> return err;
>> }
>>
>> -static bool filter(struct dma_chan *chan, void *slave)
>> +static bool filter(struct dma_chan *chan, void *pdata)
>> {
>> - struct at_dma_slave *sl = slave;
>> + struct atmel_spi_dma *sl_pdata = pdata;
>> + struct at_dma_slave *sl;
>>
>> + if (!sl_pdata)
>> + return false;
>> +
>> + sl = &sl_pdata->dma_slave;
>> if (sl->dma_dev == chan->device->dev) {
>
> I am wondering if a null pointer dereference can happen here. In
> atmel_spi_configure_dma sdata was checked so maybe sl should be check
> here.
sdata was checked, but there was no point checking it:
if as is not null, as->dma.dma_slave is defined ; so its address is not null.
it's the same in the filter function now:
if sl_pdata is not null, sl_pdata->dma_slave is defined ; so its
address is not null.
I added a check on sl_pdata in this patch, maybe a (BUG|WARN)_ON()
would have been better, as it really should not happen.
>> chan->private = sl;
>> return true;
>> @@ -438,24 +443,31 @@ static bool filter(struct dma_chan *chan, void *slave)
>>
>> static int atmel_spi_configure_dma(struct atmel_spi *as)
>> {
>> - struct at_dma_slave *sdata = &as->dma.dma_slave;
>> struct dma_slave_config slave_config;
>> + struct device *dev = &as->pdev->dev;
>> int err;
>>
>> - if (sdata && sdata->dma_dev) {
>> - dma_cap_mask_t mask;
>> + dma_cap_mask_t mask;
>> + dma_cap_zero(mask);
>> + dma_cap_set(DMA_SLAVE, mask);
>>
>> - /* Try to grab two DMA channels */
>> - dma_cap_zero(mask);
>> - dma_cap_set(DMA_SLAVE, mask);
>> - as->dma.chan_tx = dma_request_channel(mask, filter, sdata);
>> - if (as->dma.chan_tx)
>> - as->dma.chan_rx =
>> - dma_request_channel(mask, filter, sdata);
>> + as->dma.chan_tx = dma_request_slave_channel_compat(mask, filter,
>> + &as->dma,
>> + dev, "tx");
>> + if (!as->dma.chan_tx) {
>> + dev_err(dev,
>> + "DMA TX channel not available, SPI unable to use DMA\n");
>> + err = -EBUSY;
>> + goto error;
>> }
>> - if (!as->dma.chan_rx || !as->dma.chan_tx) {
>> - dev_err(&as->pdev->dev,
>> - "DMA channel not available, SPI unable to use DMA\n");
>> +
>> + as->dma.chan_rx = dma_request_slave_channel_compat(mask, filter,
>> + &as->dma,
>> + dev, "rx");
>> +
>> + if (!as->dma.chan_rx) {
>> + dev_err(dev,
>> + "DMA RX channel not available, SPI unable to use DMA\n");
>> err = -EBUSY;
>> goto error;
>> }
>> --
>> 1.7.10.4
>>
Best regards,
Richard.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/