Re: [PATCH] KVM: fix sil/dil/bpl/spl in the mod/rm fields

[Paolo Bonzini]

Il 03/06/2013 12:25, Gleb Natapov ha scritto:
> On Thu, May 30, 2013 at 05:34:21PM +0200, Paolo Bonzini wrote:
>> Il 30/05/2013 16:35, Paolo Bonzini ha scritto:
>>> The x86-64 extended low-byte registers were fetched correctly from reg,
>>> but not from mod/rm.
>>>
>>> This fixes another bug in the boot of RHEL5.9 64-bit, but it is still
>>> not enough.
>>
>> Well, it is enough but it takes 2 minutes to reach the point where
>> hardware virtualization is used.  It is doing a lot of stuff in
>> emulation mode because FS and GS have leftovers from the A20 test:
>>
>> FS =0000 0000000000000000 0000ffff 00009300 DPL=0 DS16 [-WA]
>> GS =ffff 00000000000ffff0 0000ffff 00009300 DPL=0 DS16 [-WA]
>>
>> 0x00000000000113be:  in     $0x92,%al
>> 0x00000000000113c0:  or     $0x2,%al
>> 0x00000000000113c2:  out    %al,$0x92
>> 0x00000000000113c4:  xor    %ax,%ax
>> 0x00000000000113c6:  mov    %ax,%fs
>> 0x00000000000113c8:  dec    %ax
>> 0x00000000000113c9:  mov    %ax,%gs
>> 0x00000000000113cb:  inc    %ax
>> 0x00000000000113cc:  mov    %ax,%fs:0x200
>> 0x00000000000113d0:  cmp    %gs:0x210,%ax
>> 0x00000000000113d5:  je     0x113cb
>>
> This is 16 bit code that sets them up. So 32bit transition code does not
> reload them?

Yes.  It does this:

        movw    $1, %ax                         # protected mode (PE) bit
        lmsw    %ax                             # This is it!
        jmp     flush_instr

flush_instr:
        xorw    %bx, %bx                        # Flag to indicate a boot
        xorl    %esi, %esi                      # Pointer to real-mode code
        movw    %cs, %si
        subw    $DELTA_INITSEG, %si
        shll    $4, %esi                        # Convert to 32-bit pointer
        .byte 0x66, 0xea                        # prefix + jmpi-opcode
code32: .long   0x1000                          # will be set to 0x100000
                                                # for big kernels
        .word   __KERNEL_CS

which jumps to boot/compressed/head.S:

startup_32:
        cld
        cli
        movl    $(__KERNEL_DS), %eax
        movl    %eax, %ds
        movl    %eax, %es
        movl    %eax, %ss

and totally ignores fs/gs.  Much later there is this (in kernel/head.S):

        /*
         * We don't really need to load %fs or %gs, but load them anyway
         * to kill any stale realmode selectors.  This allows execution
         * under VT hardware.
         */
        movl %eax,%fs
        movl %eax,%gs
 
but the whole decompression is run under emulation.

Paolo

>> The DPL < RPL test fails.  Any ideas?  Should we introduce a new
>> intermediate value for emulate_invalid_guest_state (0=none, 1=some, 2=full)?
>>
>> Paolo
>>
>>> Cc: gnatapov@xxxxxxxxxx
>>> Cc: kvm@xxxxxxxxxxxxxxx
>>> Cc: <stable@xxxxxxxxxxxxxxx> # 3.9
>>> Signed-off-by: Paolo Bonzini <pbonzini@xxxxxxxxxx>
>>> ---
>>>  arch/x86/kvm/emulate.c | 5 ++++-
>>>  1 file changed, 4 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
>>> index aa68106..028b34f 100644
>>> --- a/arch/x86/kvm/emulate.c
>>> +++ b/arch/x86/kvm/emulate.c
>>> @@ -1239,9 +1239,12 @@ static int decode_modrm(struct x86_emulate_ctxt *ctxt,
>>>  	ctxt->modrm_seg = VCPU_SREG_DS;
>>>  
>>>  	if (ctxt->modrm_mod == 3) {
>>> +		int highbyte_regs = ctxt->rex_prefix == 0;
>>> +
>>>  		op->type = OP_REG;
>>>  		op->bytes = (ctxt->d & ByteOp) ? 1 : ctxt->op_bytes;
>>> -		op->addr.reg = decode_register(ctxt, ctxt->modrm_rm, ctxt->d & ByteOp);
>>> +		op->addr.reg = decode_register(ctxt, ctxt->modrm_rm,
>>> +					       highbyte_regs && (ctxt->d & ByteOp));
>>>  		if (ctxt->d & Sse) {
>>>  			op->type = OP_XMM;
>>>  			op->bytes = 16;
>>>
> 
> --
> 			Gleb.
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/