[RESEND][PATCH 3/7] net, ipw2x00: remove redundant D0 power state set

[Yijing Wang]

Pci_enable_device() will set device power state to D0,
so it's no need to do it again in ipw2100_pci_init_one().

Signed-off-by: Yijing Wang <wangyijing@xxxxxxxxxx>
Cc: Stanislav Yakovlev <stas.yakovlev@xxxxxxxxx>
Cc: "John W. Linville" <linville@xxxxxxxxxxxxx>
Cc: netdev@xxxxxxxxxxxxxxx
Cc: linux-wireless@xxxxxxxxxxxxxxx
---
 drivers/net/wireless/ipw2x00/ipw2100.c |    2 --
 1 files changed, 0 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c
index 15920aa..f8ab193 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -6242,8 +6242,6 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev,
 	if ((val & 0x0000ff00) != 0)
 		pci_write_config_dword(pci_dev, 0x40, val & 0xffff00ff);
 
-	pci_set_power_state(pci_dev, PCI_D0);
-
 	if (!ipw2100_hw_is_adapter_in_system(dev)) {
 		printk(KERN_WARNING DRV_NAME
 		       "Device not found via register read.\n");
-- 
1.7.1


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/