[PATCH] ethernet/arc/arc_emac - Add new driver
From: Alexey Brodkin
Date: Tue Jun 04 2013 - 08:23:25 EST
Driver for non-standard on-chip ethernet device ARC EMAC 10/100,
instantiated in some legacy ARC (Synopsys) FPGA Boards such as
ARCAngel4/ML50x.
This is based off of current Linus tree, build tested for x86.
Signed-off-by: Alexey Brodkin <abrodkin@xxxxxxxxxxxx>
Reviewed-by: Vineet Gupta <vgupta@xxxxxxxxxxxx>
Reviewed-by: Mischa Jonker <mjonker@xxxxxxxxxxxx>
Cc: Vineet Gupta <vgupta@xxxxxxxxxxxx>
Cc: Mischa Jonker <mjonker@xxxxxxxxxxxx>
Cc: Grant Likely <grant.likely@xxxxxxxxxx>
Cc: Rob Herring <rob.herring@xxxxxxxxxxx>
Cc: Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx>
Cc: "David S. Miller" <davem@xxxxxxxxxxxxx>
Cc: "Steven J. Hill" <sjhill@xxxxxxxx>
Cc: linux-kernel@xxxxxxxxxxxxxxx
Cc: devicetree-discuss@xxxxxxxxxxxxxxxx
---
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/arc/Kconfig | 29 +
drivers/net/ethernet/arc/Makefile | 6 +
drivers/net/ethernet/arc/arc_emac_main.c | 905 ++++++++++++++++++++++++++++++
drivers/net/ethernet/arc/arc_emac_main.h | 82 +++
drivers/net/ethernet/arc/arc_emac_mdio.c | 181 ++++++
drivers/net/ethernet/arc/arc_emac_mdio.h | 22 +
drivers/net/ethernet/arc/arc_emac_regs.h | 73 +++
9 files changed, 1300 insertions(+)
create mode 100644 drivers/net/ethernet/arc/Kconfig
create mode 100644 drivers/net/ethernet/arc/Makefile
create mode 100644 drivers/net/ethernet/arc/arc_emac_main.c
create mode 100644 drivers/net/ethernet/arc/arc_emac_main.h
create mode 100644 drivers/net/ethernet/arc/arc_emac_mdio.c
create mode 100644 drivers/net/ethernet/arc/arc_emac_mdio.h
create mode 100644 drivers/net/ethernet/arc/arc_emac_regs.h
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index ed956e0..c986521 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -23,6 +23,7 @@ source "drivers/net/ethernet/aeroflex/Kconfig"
source "drivers/net/ethernet/alteon/Kconfig"
source "drivers/net/ethernet/amd/Kconfig"
source "drivers/net/ethernet/apple/Kconfig"
+source "drivers/net/ethernet/arc/Kconfig"
source "drivers/net/ethernet/atheros/Kconfig"
source "drivers/net/ethernet/cadence/Kconfig"
source "drivers/net/ethernet/adi/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 8268d85..ceed1d3 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_GRETH) += aeroflex/
obj-$(CONFIG_NET_VENDOR_ALTEON) += alteon/
obj-$(CONFIG_NET_VENDOR_AMD) += amd/
obj-$(CONFIG_NET_VENDOR_APPLE) += apple/
+obj-$(CONFIG_NET_VENDOR_ARC) += arc/
obj-$(CONFIG_NET_VENDOR_ATHEROS) += atheros/
obj-$(CONFIG_NET_CADENCE) += cadence/
obj-$(CONFIG_NET_BFIN) += adi/
diff --git a/drivers/net/ethernet/arc/Kconfig b/drivers/net/ethernet/arc/Kconfig
new file mode 100644
index 0000000..4fa4872
--- /dev/null
+++ b/drivers/net/ethernet/arc/Kconfig
@@ -0,0 +1,29 @@
+#
+# ARC EMAC network device configuration
+#
+
+config NET_VENDOR_ARC
+ bool "ARC devices"
+ default y
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about ARC cards. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if NET_VENDOR_ARC
+
+config ARC_EMAC
+ tristate "ARC EMAC support"
+ select MII
+ select PHYLIB
+ ---help---
+ On some legacy ARC (Synopsys) FPGA boards such as ARCAngel4/ML50x
+ non-standard on-chip ethernet device ARC EMAC 10/100 is used.
+ Say Y here if you have such a board. If unsure, say N.
+
+endif # NET_VENDOR_ARC
diff --git a/drivers/net/ethernet/arc/Makefile b/drivers/net/ethernet/arc/Makefile
new file mode 100644
index 0000000..f5b73e5
--- /dev/null
+++ b/drivers/net/ethernet/arc/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the ARC network device drivers.
+#
+
+arc_emac-objs := arc_emac_main.o arc_emac_mdio.o
+obj-$(CONFIG_ARC_EMAC) += arc_emac.o
diff --git a/drivers/net/ethernet/arc/arc_emac_main.c b/drivers/net/ethernet/arc/arc_emac_main.c
new file mode 100644
index 0000000..de2f94f
--- /dev/null
+++ b/drivers/net/ethernet/arc/arc_emac_main.c
@@ -0,0 +1,905 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2013 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Driver for the ARC EMAC 10100 (Rev 5)
+ *
+ * Alexey Brodkin: June 2013
+ * -Upsteaming
+ * -Refactoring
+ * = Use device-tree/OF for configuration
+ * = Use libphy for phy management
+ * = Remove non-NAPI code sections
+ * = Remove ARC-specific BD management implementations
+ * = Add ethtool functionality
+ *
+ * Vineet Gupta: June 2011
+ * -Issues when working with 64b cache line size
+ * = BD rings point to aligned location in an internal buffer
+ * = added support for cache coherent BD Ring memory
+ *
+ * Vineet Gupta: May 2010
+ * -Reduced foot-print of the main ISR (handling for error cases moved out
+ * into a separate non-inline function).
+ * -Driver Tx path optimized for small packets (which fit into 1 BD = 2K).
+ * Any specifics for chaining are in a separate block of code.
+ *
+ * Vineet Gupta: Nov 2009
+ * -Unified NAPI and Non-NAPI Code.
+ * -API changes since 2.6.26 for making NAPI independent of netdevice
+ * -Cutting a few checks in main Rx poll routine
+ * -Tweaked NAPI implementation:
+ * In poll mode, Original driver would always start sweeping BD chain
+ * from BD-0 upto poll budget (40). And if it got over-budget it would
+ * drop reminder of packets.
+ * Instead now we remember last BD polled and in next
+ * cycle, we resume from next BD onwards. That way in case of over-budget
+ * no packet needs to be dropped.
+ *
+ * Vineet Gupta: Nov 2009
+ * -Rewrote the driver register access macros so that multiple accesses
+ * in same function use "anchor" reg to save the base addr causing
+ * shorter instructions
+ *
+ * Amit Bhor, Sameer Dhavale: 2004
+ */
+
+#include <linux/etherdevice.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_mdio.h>
+#include <linux/of_net.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#include "arc_emac_regs.h"
+#include "arc_emac_mdio.h"
+#include "arc_emac_main.h"
+
+#define DRV_NAME "arc_emac"
+#define DRV_VERSION "2.0"
+
+/**
+ * arc_emac_adjust_link - Adjust the PHY link speed/duplex.
+ * @net_dev: Pointer to the net_device structure.
+ *
+ * This function is called to change the speed and duplex setting after
+ * auto negotiation is done by the PHY.
+ */
+static void
+arc_emac_adjust_link(struct net_device *net_dev)
+{
+ struct arc_emac_priv *priv = netdev_priv(net_dev);
+ struct phy_device *phydev = priv->phy_dev;
+ u32 reg;
+
+ int status_change = 0;
+
+ BUG_ON(!priv->phy_dev);
+
+ if (phydev->link && (priv->old_speed != phydev->speed)) {
+ /* speed changed */
+ switch (phydev->speed) {
+ case SPEED_10:
+ case SPEED_100:
+ break;
+ default:
+ netdev_warn(net_dev,
+ "Speed (%d) is not 10/100?\n", phydev->speed);
+ break;
+ }
+ priv->old_speed = phydev->speed;
+ status_change = 1;
+ }
+
+ if (phydev->link && (priv->old_duplex != phydev->duplex)) {
+ /* duplex mode changed */
+ reg = EMAC_REG_GET(priv->reg_base_addr, R_CTRL);
+ if (DUPLEX_FULL == phydev->duplex)
+ reg |= ENFL_MASK;
+ else
+ reg &= ~ENFL_MASK;
+ EMAC_REG_SET(priv->reg_base_addr, R_CTRL, reg);
+ priv->old_duplex = phydev->duplex;
+ status_change = 1;
+ }
+
+ if (phydev->link != priv->old_link) {
+ /* link state changed */
+ if (!phydev->link) {
+ /* link went down */
+ priv->old_speed = 0;
+ priv->old_duplex = -1;
+ }
+ priv->old_link = phydev->link;
+ status_change = 1;
+ }
+
+ if (status_change)
+ phy_print_status(phydev);
+}
+
+/**
+ * arc_emac_get_settings - Get PHY settings.
+ * @net_dev: Pointer to net_device structure.
+ * @cmd: Pointer to ethtool_cmd structure.
+ *
+ * This implements ethtool command for getting PHY settings. If PHY could
+ * not be found, the function returns -ENODEV. This function calls the
+ * relevant PHY ethtool API to get the PHY settings.
+ * Issue "ethtool ethX" under linux prompt to execute this function.
+ */
+static int arc_emac_get_settings(struct net_device *net_dev,
+ struct ethtool_cmd *cmd)
+{
+ struct arc_emac_priv *aup = netdev_priv(net_dev);
+
+ if (aup->phy_dev)
+ return phy_ethtool_gset(aup->phy_dev, cmd);
+
+ return -EINVAL;
+}
+
+/**
+ * arc_emac_set_settings - Set PHY settings as passed in the argument.
+ * @net_dev: Pointer to net_device structure.
+ * @cmd: Pointer to ethtool_cmd structure.
+ *
+ * This implements ethtool command for setting various PHY settings. If PHY
+ * could not be found, the function returns -ENODEV. This function calls the
+ * relevant PHY ethtool API to set the PHY.
+ * Issue e.g. "ethtool -s ethX speed 1000" under linux prompt to execute this
+ * function.
+ */
+static int arc_emac_set_settings(struct net_device *net_dev,
+ struct ethtool_cmd *cmd)
+{
+ struct arc_emac_priv *aup = netdev_priv(net_dev);
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ if (aup->phy_dev)
+ return phy_ethtool_sset(aup->phy_dev, cmd);
+
+ return -EINVAL;
+}
+
+/**
+ * arc_emac_get_drvinfo - Get EMAC driver information.
+ * @net_dev: Pointer to net_device structure.
+ * @info: Pointer to ethtool_drvinfo structure.
+ *
+ * This implements ethtool command for getting the driver information.
+ * Issue "ethtool -i ethX" under linux prompt to execute this function.
+ */
+static void arc_emac_get_drvinfo(struct net_device *net_dev,
+ struct ethtool_drvinfo *info)
+{
+ strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
+ strlcpy(info->version, DRV_VERSION, sizeof(info->version));
+}
+
+static const struct ethtool_ops arc_emac_ethtool_ops = {
+ .get_settings = arc_emac_get_settings,
+ .set_settings = arc_emac_set_settings,
+ .get_drvinfo = arc_emac_get_drvinfo,
+ .get_link = ethtool_op_get_link,
+};
+
+static int arc_emac_poll(struct napi_struct *napi, int budget)
+{
+ struct net_device *net_dev = napi->dev;
+ struct arc_emac_priv *priv = netdev_priv(net_dev);
+ struct sk_buff *skb, *skbnew;
+ unsigned int i, loop, len, info, work_done = 0;
+
+ /* Loop thru the BD chain, but not always from 0.
+ * Start from right after where we last saw a packet.
+ */
+ i = priv->last_rx_bd;
+
+ for (loop = 0; loop < RX_BD_NUM; loop++) {
+ i = (i + 1) & (RX_BD_NUM - 1);
+
+ info = priv->rxbd[i].info;
+
+ /* BD contains a packet for CPU to grab */
+ if (likely((info & OWN_MASK) == FOR_CPU)) {
+
+ /* Make a note that we saw a packet at this BD.
+ * So next time, driver starts from this + 1
+ */
+ priv->last_rx_bd = i;
+
+ /* Packet fits in one BD (Non Fragmented) */
+ if (likely((info & (FRST_MASK | LAST_MASK)) ==
+ (FRST_MASK | LAST_MASK))) {
+
+ len = info & LEN_MASK;
+ priv->stats.rx_packets++;
+ priv->stats.rx_bytes += len;
+ skb = priv->rx_skbuff[i];
+
+ /* Get a new SKB from stack */
+ skbnew = netdev_alloc_skb(net_dev,
+ net_dev->mtu + EMAC_BUFFER_PAD);
+ if (!skbnew) {
+ netdev_err(net_dev,
+ "Out of memory, dropping packet\n");
+
+ /* Return buffer to EMAC */
+ priv->rxbd[i].info = FOR_EMAC |
+ (net_dev->mtu +
+ EMAC_BUFFER_PAD);
+ priv->stats.rx_dropped++;
+ continue;
+ }
+
+ /* Actually preparing the BD for next cycle
+ * IP header align, eth is 14 bytes
+ */
+ skb_reserve(skbnew, 2);
+ priv->rx_skbuff[i] = skbnew;
+
+ priv->rxbd[i].data = skbnew->data;
+ priv->rxbd[i].info = FOR_EMAC |
+ (net_dev->mtu + EMAC_BUFFER_PAD);
+
+ /* Prepare arrived pkt for delivery to stack */
+ dma_map_single(&net_dev->dev,
+ (void *)skb->data,
+ len, DMA_FROM_DEVICE);
+
+ skb->dev = net_dev;
+ /* Make room for data */
+ skb_put(skb, len - 4);
+ skb->protocol = eth_type_trans(skb, net_dev);
+
+ /* Correct NAPI semantics:
+ * If work quota exceeded return don't de-queue
+ * any further packets
+ */
+ work_done++;
+ netif_receive_skb(skb);
+ if (work_done >= budget)
+ break;
+ } else {
+ /* Buffer chaining results in a significant
+ * amount of additional bus overhead and thus
+ * a higher CLK frequency is required or larger
+ * FIFOs are required.
+ * Because of that fact we don't support
+ * chaining of receive packets. We preallocate
+ * buffers of MTU size so incoming packets
+ * won't be chained
+ */
+ netdev_warn(net_dev,
+ "Rx chained, packet is larger than "
+ "device MTU (%d bytes)\n",
+ net_dev->mtu);
+
+ /* Return buffer to EMAC */
+ priv->rxbd[i].info = FOR_EMAC |
+ (net_dev->mtu + EMAC_BUFFER_PAD);
+ priv->stats.rx_length_errors++;
+ }
+ } /* BD for CPU */
+ } /* BD chain loop */
+
+ if (work_done < budget) {
+ napi_complete(napi);
+ EMAC_REG_OR(priv->reg_base_addr, R_ENABLE, RXINT_MASK);
+ }
+
+ return work_done;
+}
+
+/**
+ * arc_emac_intr - Global interrupt handler for EMAC.
+ * @irq: irq number.
+ * @net_dev: net_device pointer.
+ *
+ * returns: IRQ_HANDLED for all cases.
+ *
+ * ARC EMAC has only 1 interrupt line, and depending on bits raised in
+ * STATUS register we may tell what is a reason for interrupt to fire.
+ */
+static irqreturn_t arc_emac_intr(int irq, void *dev_instance)
+{
+ struct net_device *net_dev = (struct net_device *)dev_instance;
+ struct arc_emac_priv *priv = netdev_priv(net_dev);
+ unsigned int status;
+
+ /* Read STATUS register from EMAC */
+ status = EMAC_REG_GET(priv->reg_base_addr, R_STATUS);
+
+ /* Mask all bits except "MDIO complete" */
+ status &= ~MDIO_MASK;
+
+ /* To reset any bit in STATUS register we need to write "1" in
+ * corresponding bit. That's why we write only masked bits back.
+ */
+ EMAC_REG_SET(priv->reg_base_addr, R_STATUS, status);
+
+ if (likely(status & (RXINT_MASK | TXINT_MASK))) {
+ if (status & RXINT_MASK) {
+ if (likely(napi_schedule_prep(&priv->napi))) {
+ EMAC_REG_CLR(priv->reg_base_addr, R_ENABLE,
+ RXINT_MASK);
+ __napi_schedule(&priv->napi);
+ }
+ }
+ if (status & TXINT_MASK) {
+ unsigned int i, info;
+ struct sk_buff *skb;
+
+ for (i = 0; i < TX_BD_NUM; i++) {
+ info = priv->txbd[priv->txbd_dirty].info;
+
+ if (info & (DROP | DEFR | LTCL | UFLO))
+ netdev_warn(net_dev,
+ "FIXME: add Tx errors to stats\n");
+
+ if ((info & FOR_EMAC) ||
+ !priv->txbd[priv->txbd_dirty].data)
+ break;
+
+ if (info & LAST_MASK) {
+ skb = priv->tx_skbuff[priv->txbd_dirty];
+ priv->stats.tx_packets++;
+ priv->stats.tx_bytes += skb->len;
+ /* return the sk_buff to system */
+ dev_kfree_skb_irq(skb);
+ }
+ priv->txbd[priv->txbd_dirty].data = 0x0;
+ priv->txbd[priv->txbd_dirty].info = 0x0;
+ priv->txbd_dirty =
+ (priv->txbd_dirty + 1) % TX_BD_NUM;
+ }
+ }
+ } else {
+ if (status & ERR_MASK) {
+ /* MSER/RXCR/RXFR/RXFL interrupt fires on corresponding
+ * 8-bit error counter overrun.
+ * Because of this fact we add 256 items each time
+ * overrun interrupt happens.
+ */
+
+ if (status & TXCH_MASK) {
+ priv->stats.tx_errors++;
+ priv->stats.tx_aborted_errors++;
+ netdev_err(priv->net_dev,
+ "Tx chaining error! txbd_dirty = %u\n",
+ priv->txbd_dirty);
+ } else if (status & MSER_MASK) {
+ priv->stats.rx_missed_errors += 255;
+ priv->stats.rx_errors += 255;
+ } else if (status & RXCR_MASK) {
+ priv->stats.rx_crc_errors += 255;
+ priv->stats.rx_errors += 255;
+ } else if (status & RXFR_MASK) {
+ priv->stats.rx_frame_errors += 255;
+ priv->stats.rx_errors += 255;
+ } else if (status & RXFL_MASK) {
+ priv->stats.rx_over_errors += 255;
+ priv->stats.rx_errors += 255;
+ } else {
+ netdev_err(priv->net_dev,
+ "unknown error. Status reg is 0x%x\n",
+ status);
+ }
+ }
+ }
+ return IRQ_HANDLED;
+}
+
+/**
+ * arc_emac_open - Open the network device.
+ * @net_dev: Pointer to the network device.
+ *
+ * returns: 0, on success or non-zero error value on failure.
+ *
+ * This function sets the MAC address, requests and enables an IRQ
+ * for the EMAC device and starts the Tx queue.
+ * It also connects to the phy device.
+ */
+int arc_emac_open(struct net_device *net_dev)
+{
+ struct arc_emac_bd_t *bd;
+ struct sk_buff *skb;
+ int i;
+
+ struct arc_emac_priv *priv = netdev_priv(net_dev);
+
+ if (!priv->phy_node) {
+ netdev_err(net_dev, "arc_emac_open: phy device is absent\n");
+ return -ENODEV;
+ }
+
+ priv->phy_dev = of_phy_connect(net_dev, priv->phy_node,
+ arc_emac_adjust_link, 0,
+ PHY_INTERFACE_MODE_MII);
+
+ if (!priv->phy_dev) {
+ netdev_err(net_dev, "of_phy_connect() failed\n");
+ return -ENODEV;
+ }
+
+ netdev_info(net_dev, "connected to %s phy with id 0x%x\n",
+ priv->phy_dev->drv->name, priv->phy_dev->phy_id);
+
+ priv->phy_dev->autoneg = AUTONEG_ENABLE;
+ priv->phy_dev->speed = 0;
+ priv->phy_dev->duplex = 0;
+
+ /* We support only up-to 100mbps speeds */
+ priv->phy_dev->advertising =
+ priv->phy_dev->supported & PHY_BASIC_FEATURES;
+ priv->phy_dev->advertising |= ADVERTISED_Autoneg;
+
+ /* Restart auto negotiation */
+ phy_start_aneg(priv->phy_dev);
+
+ netif_start_queue(net_dev);
+
+ /* Allocate and set buffers for Rx BD's */
+ bd = priv->rxbd;
+ for (i = 0; i < RX_BD_NUM; i++) {
+ skb = dev_alloc_skb(net_dev->mtu + EMAC_BUFFER_PAD);
+
+ /* IP header Alignment (14 byte Ethernet header) */
+ skb_reserve(skb, 2);
+ priv->rx_skbuff[i] = skb;
+ bd->data = skb->data;
+
+ /* EMAC owns Rx descriptors */
+ bd->info = FOR_EMAC | (net_dev->mtu + EMAC_BUFFER_PAD);
+ bd++;
+ }
+
+ /* setup last seen to MAX, so driver starts from 0 */
+ priv->last_rx_bd = RX_BD_NUM - 1;
+
+ /* Allocate Tx BD's similar to Rx BD's. All Tx BD's owned by CPU */
+ bd = priv->txbd;
+ for (i = 0; i < TX_BD_NUM; i++) {
+ bd->data = 0;
+ bd->info = 0;
+ bd++;
+ }
+
+ /* Initialize logical address filter */
+ EMAC_REG_SET(priv->reg_base_addr, R_LAFL, 0);
+ EMAC_REG_SET(priv->reg_base_addr, R_LAFH, 0);
+
+ /* Set BD ring pointers for device side */
+ EMAC_REG_SET(priv->reg_base_addr, R_RX_RING,
+ (unsigned int)priv->rxbd_dma_hdl);
+
+ EMAC_REG_SET(priv->reg_base_addr, R_TX_RING,
+ (unsigned int)priv->rxbd_dma_hdl + RX_RING_SZ);
+
+ /* Set Poll rate so that it polls every 1 ms */
+ EMAC_REG_SET(priv->reg_base_addr, R_POLLRATE,
+ priv->clock_frequency / 1000000);
+
+ /* Enable interrupts. Note: interrupts wont actually come till we set
+ * CONTROL below.
+ */
+ EMAC_REG_SET(priv->reg_base_addr, R_ENABLE,
+ TXINT_MASK | /* Transmit interrupt */
+ RXINT_MASK | /* Receive interrupt */
+ ERR_MASK | /* Error interrupt */
+ TXCH_MASK | /* Transmit chaining error interrupt */
+ MSER_MASK); /* Missed packet error */
+
+ /* Set CONTROL */
+ EMAC_REG_SET(priv->reg_base_addr, R_CTRL,
+ (RX_BD_NUM << 24) | /* RX buffer desc table len */
+ (TX_BD_NUM << 16) | /* TX buffer desc table len */
+ TXRN_MASK | /* TX enable */
+ RXRN_MASK); /* RX enable */
+
+ EMAC_REG_OR(priv->reg_base_addr, R_CTRL, EN_MASK);
+
+ netif_wake_queue(net_dev);
+ napi_enable(&priv->napi);
+
+ return 0;
+}
+
+/**
+ * arc_emac_stop - Close the network device.
+ * @net_dev: Pointer to the network device.
+ *
+ * This function stops the Tx queue, disables interrupts and frees the IRQ for
+ * the EMAC device.
+ * It also disconnects the phy device associated with the EMAC device.
+ */
+int arc_emac_stop(struct net_device *net_dev)
+{
+ struct arc_emac_priv *priv = netdev_priv(net_dev);
+
+ napi_disable(&priv->napi);
+ netif_stop_queue(net_dev);
+
+ /* Disable interrupts */
+ EMAC_REG_CLR(priv->reg_base_addr, R_ENABLE,
+ TXINT_MASK | /* Tx interrupt */
+ RXINT_MASK | /* Rx interrupt */
+ ERR_MASK | /* Error interrupt */
+ TXCH_MASK); /* Transmit chaining error interrupt */
+
+ if (priv->phy_dev)
+ phy_disconnect(priv->phy_dev);
+ priv->phy_dev = NULL;
+
+ /* Disable EMAC */
+ EMAC_REG_CLR(priv->reg_base_addr, R_CTRL, EN_MASK);
+
+ return 0;
+}
+
+/**
+ * arc_emac_stats - Get system network statistics.
+ * @net_dev: Pointer to net_device structure.
+ *
+ * Returns the address of the device statistics structure.
+ * Statistics are updated in interrupt handler.
+ */
+struct net_device_stats *arc_emac_stats(struct net_device *net_dev)
+{
+ unsigned long miss, rxerr, rxfram, rxcrc, rxoflow;
+ struct arc_emac_priv *priv = netdev_priv(net_dev);
+
+ rxerr = EMAC_REG_GET(priv->reg_base_addr, R_RXERR);
+ miss = EMAC_REG_GET(priv->reg_base_addr, R_MISS);
+
+ rxcrc = (rxerr & 0xff);
+ rxfram = (rxerr >> 8 & 0xff);
+ rxoflow = (rxerr >> 16 & 0xff);
+
+ priv->stats.rx_errors += miss;
+ priv->stats.rx_errors += rxcrc + rxfram + rxoflow;
+
+ priv->stats.rx_over_errors += rxoflow;
+ priv->stats.rx_frame_errors += rxfram;
+ priv->stats.rx_crc_errors += rxcrc;
+ priv->stats.rx_missed_errors += miss;
+
+ return &priv->stats;
+}
+
+/**
+ * arc_emac_tx - Starts the data transmission.
+ * @skb: sk_buff pointer that contains data to be Transmitted.
+ * @net_dev: Pointer to net_device structure.
+ *
+ * returns: NETDEV_TX_OK, on success
+ * NETDEV_TX_BUSY, if any of the descriptors are not free.
+ *
+ * This function is invoked from upper layers to initiate transmission.
+ */
+int arc_emac_tx(struct sk_buff *skb, struct net_device *net_dev)
+{
+ int len, bitmask;
+ unsigned int info;
+ char *pkt;
+ struct arc_emac_priv *priv = netdev_priv(net_dev);
+
+ len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
+ pkt = skb->data;
+ net_dev->trans_start = jiffies;
+
+ dma_map_single(&net_dev->dev, (void *)pkt, len, DMA_TO_DEVICE);
+
+ /* Set first bit */
+ bitmask = FRST_MASK;
+
+tx_next_chunk:
+
+ info = priv->txbd[priv->txbd_curr].info;
+ if (likely((info & OWN_MASK) == FOR_CPU)) {
+ priv->txbd[priv->txbd_curr].data = pkt;
+
+ /* This case handles 2 scenarios:
+ * 1. pkt fits into 1 BD (2k)
+ * 2. Last chunk of pkt (in multiples of 2k)
+ */
+ if (likely(len <= TX_FIFO_SIZE)) {
+ priv->tx_skbuff[priv->txbd_curr] = skb;
+
+ /* Set data length, bit mask and give ownership to
+ * EMAC This should be the last thing we do. EMAC
+ * might immediately start sending
+ */
+ priv->txbd[priv->txbd_curr].info =
+ FOR_EMAC |
+ bitmask |
+ LAST_MASK |
+ len;
+
+ /* Set TXPOLL bit to force a poll */
+ EMAC_REG_SET(priv->reg_base_addr, R_STATUS, TXPL_MASK);
+
+ priv->txbd_curr = (priv->txbd_curr + 1) % TX_BD_NUM;
+ return NETDEV_TX_OK;
+ } else {
+ /* if pkt > 2k, this case handles all non last chunks */
+ priv->txbd[priv->txbd_curr].info =
+ FOR_EMAC |
+ bitmask |
+ (len & (TX_FIFO_SIZE - 1));
+
+ /* clear the FIRST CHUNK bit */
+ bitmask = 0;
+
+ len -= TX_FIFO_SIZE;
+ }
+
+ priv->txbd_curr = (priv->txbd_curr + 1) % TX_BD_NUM;
+ goto tx_next_chunk;
+
+ } else {
+ return NETDEV_TX_BUSY;
+ }
+}
+
+/**
+ * arc_emac_set_address - Set the MAC address for this device.
+ * @net_dev: Pointer to net_device structure.
+ * @p: 6 byte Address to be written as MAC address.
+ *
+ * This function copies the HW address from the sockaddr structure to the
+ * net_device structure and updates the address in HW.
+ *
+ * returns: -EBUSY if the net device is busy or 0 if the address is set
+ * successfully.
+ */
+int arc_emac_set_address(struct net_device *net_dev, void *p)
+{
+ struct sockaddr *addr = p;
+ struct arc_emac_priv *priv = netdev_priv(net_dev);
+
+ if (netif_running(net_dev))
+ return -EBUSY;
+
+ memcpy(net_dev->dev_addr, addr->sa_data, net_dev->addr_len);
+
+ EMAC_REG_SET(priv->reg_base_addr, R_ADDRL,
+ *(unsigned int *)net_dev->dev_addr);
+ EMAC_REG_SET(priv->reg_base_addr, R_ADDRH,
+ (*(unsigned int *)&net_dev->dev_addr[4]) & 0x0000ffff);
+
+ return 0;
+}
+
+static const struct net_device_ops arc_emac_netdev_ops = {
+ .ndo_open = arc_emac_open,
+ .ndo_stop = arc_emac_stop,
+ .ndo_start_xmit = arc_emac_tx,
+ .ndo_set_mac_address = arc_emac_set_address,
+ .ndo_get_stats = arc_emac_stats,
+};
+
+static int arc_emac_probe(struct platform_device *pdev)
+{
+ struct net_device *net_dev;
+ struct arc_emac_priv *priv;
+ int err;
+ unsigned int clock_frequency;
+ unsigned int id;
+ struct resource res_regs;
+#ifdef CONFIG_OF_IRQ
+ struct resource res_irq;
+#endif
+ const char *mac_addr = NULL;
+
+ /* no device tree device */
+ if (!pdev->dev.of_node)
+ return -ENODEV;
+
+ net_dev = alloc_etherdev(sizeof(struct arc_emac_priv));
+ if (!net_dev) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ SET_NETDEV_DEV(net_dev, &pdev->dev);
+
+ /* Populate our net_device structure */
+ net_dev->netdev_ops = &arc_emac_netdev_ops;
+ net_dev->ethtool_ops = &arc_emac_ethtool_ops;
+ net_dev->watchdog_timeo = TX_TIMEOUT;
+ /* FIXME :: no multicast support yet */
+ net_dev->flags &= ~IFF_MULTICAST;
+
+ priv = netdev_priv(net_dev);
+ priv->net_dev = net_dev;
+
+ /* Get phy from device tree */
+ priv->phy_node = of_parse_phandle(pdev->dev.of_node, "phy", 0);
+ if (!priv->phy_node) {
+ dev_err(&pdev->dev,
+ "failed to retrieve phy description from device tree\n");
+ err = -ENODEV;
+ goto out;
+ }
+
+ /* Get EMAC registers base address from device tree */
+ err = of_address_to_resource(pdev->dev.of_node, 0, &res_regs);
+ if (err) {
+ dev_err(&pdev->dev,
+ "failed to retrieve base register from device tree\n");
+ err = -ENODEV;
+ goto out;
+ }
+
+ if (!devm_request_mem_region(&pdev->dev, res_regs.start,
+ resource_size(&res_regs), pdev->name)) {
+ dev_err(&pdev->dev,
+ "failed to request memory region for base registers\n");
+ err = -ENXIO;
+ goto out;
+ }
+
+ priv->reg_base_addr = (void *) devm_ioremap_nocache(&pdev->dev,
+ res_regs.start, resource_size(&res_regs));
+ if (!priv->reg_base_addr) {
+ dev_err(&pdev->dev, "failed to ioremap MAC registers\n");
+ err = -ENXIO;
+ goto out;
+ }
+ dev_dbg(&pdev->dev,
+ "Registers base address is 0x%p\n", priv->reg_base_addr);
+
+ id = EMAC_REG_GET(priv->reg_base_addr, R_ID);
+ /* Check for EMAC revision 5 or 7, magic number */
+ if (!(id == 0x0005fd02 || id == 0x0007fd02)) {
+ dev_err(&pdev->dev,
+ "ARC EMAC not detected, read id=0x%x\n", id);
+ err = -ENODEV;
+ goto out;
+ }
+ dev_info(&pdev->dev, "ARC EMAC detected with id: 0x%x\n", id);
+
+ /* Get CPU clock frequency from device tree */
+ if (of_property_read_u32(pdev->dev.of_node, "clock-frequency",
+ &clock_frequency)) {
+ dev_err(&pdev->dev,
+ "can't read <clock-frequency> from device tree\n");
+ err = -EINVAL;
+ goto out;
+ }
+ priv->clock_frequency = clock_frequency;
+
+ /* Get IRQ from device tree */
+#ifdef CONFIG_OF_IRQ
+ err = of_irq_to_resource(pdev->dev.of_node, 0, &res_irq);
+ if (!err) {
+ dev_err(&pdev->dev,
+ "failed to retrieve <irq> value from device tree\n");
+ err = -ENODEV;
+ goto out;
+ }
+ net_dev->irq = res_irq.start;
+#endif
+ dev_info(&pdev->dev, "IRQ is %d\n", net_dev->irq);
+
+ /* Register interrupt handler for device */
+ err = devm_request_irq(&pdev->dev, net_dev->irq, arc_emac_intr, 0,
+ net_dev->name, net_dev);
+ if (err) {
+ dev_err(&pdev->dev, "could not allocate IRQ\n");
+ goto out;
+ }
+
+ /* Get MAC address from device tree */
+#ifdef CONFIG_OF_NET
+ mac_addr = of_get_mac_address(pdev->dev.of_node);
+#endif
+ if (!mac_addr || !is_valid_ether_addr(mac_addr))
+ eth_hw_addr_random(net_dev);
+ else
+ memcpy(net_dev->dev_addr, mac_addr, ETH_ALEN);
+
+ dev_info(&pdev->dev, "MAC address is now %pM\n", net_dev->dev_addr);
+
+ /* Allocate cache coherent memory for BD Rings - to avoid need to do
+ * explicit uncached ".di" accesses, which can potentially screw-up
+ */
+ priv->rxbd = (struct arc_emac_bd_t *)dmam_alloc_coherent(&pdev->dev,
+ RX_RING_SZ + TX_RING_SZ, &priv->rxbd_dma_hdl, GFP_KERNEL);
+
+ if (!priv->rxbd) {
+ dev_err(&pdev->dev, "failed to allocate data buffers\n");
+ err = -ENOMEM;
+ goto out;
+ }
+
+ priv->txbd = priv->rxbd + RX_BD_NUM;
+
+ /* To keep things simple - we just do 1 big allocation, instead of 2
+ * separate ones for Rx and Tx Rings responsively
+ */
+ priv->txbd_dma_hdl = priv->rxbd_dma_hdl + RX_RING_SZ;
+ dev_dbg(&pdev->dev, "EMAC Device addr: Rx Ring [0x%x], Tx Ring[%x]\n",
+ (unsigned int)priv->rxbd_dma_hdl,
+ (unsigned int)priv->txbd_dma_hdl);
+
+ priv->mdio_priv = devm_kzalloc(&pdev->dev, sizeof(struct arc_mdio_priv),
+ GFP_KERNEL);
+
+ if (!priv->mdio_priv) {
+ dev_err(&pdev->dev,
+ "cannot allocate memory for MDIO private structure\n");
+ err = -ENOMEM;
+ goto out;
+ }
+
+ priv->mdio_priv->reg_base_addr = priv->reg_base_addr;
+ priv->mdio_priv->dev = &pdev->dev;
+
+ err = arc_mdio_probe(pdev->dev.of_node, priv->mdio_priv);
+ if (err) {
+ dev_err(&pdev->dev, "failed to probe MII bus\n");
+ goto out;
+ }
+
+ netif_napi_add(net_dev, &priv->napi, arc_emac_poll, NAPI_WEIGHT);
+
+ err = register_netdev(net_dev);
+ if (err) {
+ netif_napi_del(&priv->napi);
+ dev_err(&pdev->dev, "failed to register network device\n");
+ goto out;
+ }
+
+ return 0;
+
+out:
+ free_netdev(net_dev);
+ return err;
+}
+
+static int arc_emac_remove(struct platform_device *pdev)
+{
+ struct net_device *net_dev = platform_get_drvdata(pdev);
+ struct arc_emac_priv *priv = netdev_priv(net_dev);
+
+ arc_mdio_remove(priv->mdio_priv);
+ unregister_netdev(net_dev);
+ netif_napi_del(&priv->napi);
+ free_netdev(net_dev);
+
+ return 0;
+}
+
+static const struct of_device_id arc_emac_dt_ids[] = {
+ { .compatible = "snps,arc-emac" },
+ { /* Sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, arc_emac_dt_ids);
+
+static struct platform_driver arc_emac_driver = {
+ .probe = arc_emac_probe,
+ .remove = arc_emac_remove,
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = arc_emac_dt_ids,
+ },
+};
+
+module_platform_driver(arc_emac_driver);
+
+MODULE_AUTHOR("Alexey Brodkin <abrodkin@xxxxxxxxxxxx>");
+MODULE_DESCRIPTION("ARC EMAC driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/ethernet/arc/arc_emac_main.h b/drivers/net/ethernet/arc/arc_emac_main.h
new file mode 100644
index 0000000..6f03d26
--- /dev/null
+++ b/drivers/net/ethernet/arc/arc_emac_main.h
@@ -0,0 +1,82 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2013 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Definitions for ARC EMAC device driver
+ */
+
+#ifndef ARC_EMAC_H
+#define ARC_EMAC_H
+
+/* Transmission timeout */
+#define TX_TIMEOUT (400*HZ/1000)
+
+#define NAPI_WEIGHT 40 /* Workload for NAPI */
+
+#define TX_FIFO_SIZE 0x800 /* EMAC Tx FIFO size */
+
+/* Assuming MTU=1500 (IP pkt: hdr+payload), we round off to next cache-line
+ * boundary: 1536 % {32,64,128} == 0
+ * This provides enough space for Ethernet header (14) and also ensures that
+ * buf-size passed to EMAC > max pkt rx (1514). Latter is due to a EMAC quirk
+ * wherein it can generate a chained pkt (with all data in first part, and
+ * an empty 2nd part - albeit with last bit set) when Rx-pkt-sz is exactly
+ * equal to buf-size: hence the need to keep buf-size slightly bigger than
+ * largest pkt.
+ */
+#define EMAC_BUFFER_PAD 36
+
+struct arc_emac_bd_t {
+ unsigned int info;
+ void *data;
+};
+
+/* Number of Rx/Tx BD's */
+#define RX_BD_NUM 128
+#define TX_BD_NUM 128
+
+#define RX_RING_SZ (RX_BD_NUM * sizeof(struct arc_emac_bd_t))
+#define TX_RING_SZ (TX_BD_NUM * sizeof(struct arc_emac_bd_t))
+
+struct arc_emac_priv {
+ struct net_device_stats stats;
+ unsigned int clock_frequency;
+
+ /* Pointers to BD rings - CPU side */
+ struct arc_emac_bd_t *rxbd;
+ struct arc_emac_bd_t *txbd;
+
+ /* Pointers to BD rings - Device side */
+ dma_addr_t rxbd_dma_hdl;
+ dma_addr_t txbd_dma_hdl;
+
+ /* The actual socket buffers */
+ struct sk_buff *rx_skbuff[RX_BD_NUM];
+ struct sk_buff *tx_skbuff[TX_BD_NUM];
+ unsigned int txbd_curr;
+ unsigned int txbd_dirty;
+
+ /* Remember where driver last saw a packet, so next iteration it
+ * starts from here and not 0
+ */
+ unsigned int last_rx_bd;
+
+ struct napi_struct napi;
+
+ /* Storage for "arc_emac_adjust_link" */
+ int old_link;
+ int old_speed;
+ int old_duplex;
+
+ /* Devices */
+ struct device_node *phy_node;
+ struct phy_device *phy_dev;
+ struct net_device *net_dev;
+
+ /* MDIO private structure */
+ struct arc_mdio_priv *mdio_priv;
+
+ /* EMAC registers base address */
+ void *reg_base_addr;
+};
+
+#endif /* ARC_EMAC_H */
diff --git a/drivers/net/ethernet/arc/arc_emac_mdio.c b/drivers/net/ethernet/arc/arc_emac_mdio.c
new file mode 100644
index 0000000..f8cf5aa
--- /dev/null
+++ b/drivers/net/ethernet/arc/arc_emac_mdio.c
@@ -0,0 +1,181 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2013 Synopsys, Inc. (www.synopsys.com)
+ *
+ * MDIO implementation for ARC EMAC
+ */
+
+#include <linux/delay.h>
+#include <linux/of_mdio.h>
+
+#include "arc_emac_regs.h"
+#include "arc_emac_mdio.h"
+
+/* Number of seconds we wait for "MDIO complete" flag to appear */
+#define ARC_MDIO_COMPLETE_POLL_COUNT 1
+
+/**
+ * arc_mdio_complete_wait - Waits until MDIO transaction is completed.
+ * @priv: Pointer to ARC MDIO private data structure.
+ *
+ * returns: 0 on success, -ETIMEDOUT on a timeout.
+ */
+static inline int arc_mdio_complete_wait(struct arc_mdio_priv *priv)
+{
+ unsigned int status;
+ unsigned int count = (ARC_MDIO_COMPLETE_POLL_COUNT * 40);
+
+ while (1) {
+ /* Read STATUS register from EMAC */
+ status = EMAC_REG_GET(priv->reg_base_addr, R_STATUS);
+ /* Mask "MDIO complete" bit */
+ status &= MDIO_MASK;
+ if (status) {
+ /* Reset "MDIO complete" flag */
+ EMAC_REG_SET(priv->reg_base_addr, R_STATUS, status);
+ break;
+ }
+
+ /* Make sure we never get into infinite loop */
+ if (count-- == 0) {
+ WARN_ON(1);
+ /* Still we prefer to exit from this loop */
+ return -ETIMEDOUT;
+ }
+ msleep(25);
+ }
+ return 0;
+}
+
+/**
+ * arc_mdio_read - MDIO interface read function.
+ * @bus: Pointer to MII bus structure.
+ * @phy_addr: Address of the PHY device.
+ * @reg_num: PHY register to read.
+ *
+ * returns: The register contents on success, -ETIMEDOUT on a timeout.
+ *
+ * Reads the contents of the requested register from the requested PHY
+ * address.
+ */
+static int arc_mdio_read(struct mii_bus *bus, int phy_addr, int reg_num)
+{
+ int error;
+ unsigned int value;
+ struct arc_mdio_priv *priv = bus->priv;
+
+ EMAC_REG_SET(priv->reg_base_addr,
+ R_MDIO, 0x60020000 |
+ (phy_addr << 23) |
+ (reg_num << 18));
+
+ error = arc_mdio_complete_wait(priv);
+ if (error < 0)
+ return error;
+
+ value = EMAC_REG_GET(priv->reg_base_addr, R_MDIO) & 0xffff;
+
+ dev_dbg(priv->dev, "arc_mdio_read(phy_addr=%i, reg_num=%x) = %x\n",
+ phy_addr, reg_num, value);
+
+ return value;
+}
+
+/**
+ * arc_mdio_write - MDIO interface write function.
+ * @bus: Pointer to MII bus structure.
+ * @phy_addr: Address of the PHY device.
+ * @reg_num: PHY register to write to.
+ * @value: Value to be written into the register.
+ *
+ * returns: 0 on success, -ETIMEDOUT on a timeout.
+ *
+ * Writes the value to the requested register.
+ */
+static int arc_mdio_write(struct mii_bus *bus, int phy_addr,
+ int reg_num, u16 value)
+{
+ struct arc_mdio_priv *priv = bus->priv;
+
+ dev_dbg(priv->dev,
+ "arc_mdio_write(phy_addr=%i, reg_num=%x, value=%x)\n",
+ phy_addr, reg_num, value);
+
+ EMAC_REG_SET(priv->reg_base_addr, R_MDIO,
+ 0x50020000 |
+ (phy_addr << 23) |
+ (reg_num << 18) |
+ (value & 0xffff));
+
+ return arc_mdio_complete_wait(priv);
+}
+
+/**
+ * arc_mdio_probe - MDIO probe function.
+ * @dev_node: Pointer to device node.
+ * @priv: Pointer to ARC MDIO private data structure.
+ *
+ * returns: 0 on success, -ENOMEM when mdiobus_alloc
+ * (to allocate memory for MII bus structure) fails.
+ *
+ * Sets up and registers the MDIO interface.
+ */
+int arc_mdio_probe(struct device_node *dev_node, struct arc_mdio_priv *priv)
+{
+ struct device_node *mdio_np;
+ struct mii_bus *bus;
+ int error;
+
+ bus = mdiobus_alloc();
+ if (!bus) {
+ error = -ENOMEM;
+ goto cleanup;
+ }
+
+ priv->bus = bus;
+ bus->priv = priv;
+ bus->name = "Synopsys MII Bus",
+ bus->read = &arc_mdio_read;
+ bus->write = &arc_mdio_write;
+
+ snprintf(bus->id, MII_BUS_ID_SIZE, "%.8x",
+ (unsigned int)priv->reg_base_addr);
+
+ bus->parent = priv->dev;
+
+ mdio_np = of_find_node_by_name(NULL, "mdio");
+ if (!mdio_np) {
+ dev_err(priv->dev, "cannot find <mdio> in device tree\n");
+ error = -ENODEV;
+ goto cleanup;
+ }
+
+ error = of_mdiobus_register(bus, mdio_np);
+ if (error) {
+ dev_err(priv->dev,
+ "cannot register %s as MDIO bus\n", bus->name);
+ goto cleanup;
+ }
+
+ return 0;
+
+cleanup:
+ if (bus)
+ mdiobus_free(bus);
+
+ return error;
+}
+
+/**
+ * arc_mdio_remove - MDIO remove function.
+ * @priv: Pointer to ARC MDIO private data structure.
+ *
+ * Unregisters the MDIO and frees any associate memory for MII bus.
+ */
+int arc_mdio_remove(struct arc_mdio_priv *priv)
+{
+ mdiobus_unregister(priv->bus);
+ mdiobus_free(priv->bus);
+ priv->bus = NULL;
+
+ return 0;
+}
diff --git a/drivers/net/ethernet/arc/arc_emac_mdio.h b/drivers/net/ethernet/arc/arc_emac_mdio.h
new file mode 100644
index 0000000..9ddabf9
--- /dev/null
+++ b/drivers/net/ethernet/arc/arc_emac_mdio.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2013 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Definitions for MDIO of ARC EMAC device driver
+ */
+
+#ifndef ARC_MDIO_H
+#define ARC_MDIO_H
+
+#include <linux/device.h>
+#include <linux/phy.h>
+
+struct arc_mdio_priv {
+ struct mii_bus *bus;
+ struct device *dev;
+ void *reg_base_addr; /* MAC registers base address */
+};
+
+int arc_mdio_probe(struct device_node *np, struct arc_mdio_priv *priv);
+int arc_mdio_remove(struct arc_mdio_priv *priv);
+
+#endif /* ARC_MDIO_H */
diff --git a/drivers/net/ethernet/arc/arc_emac_regs.h b/drivers/net/ethernet/arc/arc_emac_regs.h
new file mode 100644
index 0000000..14c85a2
--- /dev/null
+++ b/drivers/net/ethernet/arc/arc_emac_regs.h
@@ -0,0 +1,73 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2013 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Registers and bits definitions of ARC EMAC
+ */
+
+#ifndef ARC_EMAC_REGS_H
+#define ARC_EMAC_REGS_H
+
+/* STATUS and ENABLE Register bit masks */
+#define TXINT_MASK (1<<0) /* Transmit interrupt */
+#define RXINT_MASK (1<<1) /* Receive interrupt */
+#define ERR_MASK (1<<2) /* Error interrupt */
+#define TXCH_MASK (1<<3) /* Transmit chaining error interrupt */
+#define MSER_MASK (1<<4) /* Missed packet counter error */
+#define RXCR_MASK (1<<8) /* RXCRCERR counter rolled over */
+#define RXFR_MASK (1<<9) /* RXFRAMEERR counter rolled over */
+#define RXFL_MASK (1<<10) /* RXOFLOWERR counter rolled over */
+#define MDIO_MASK (1<<12) /* MDIO complete interrupt */
+#define TXPL_MASK (1<<31) /* TXPOLL */
+
+/* CONTROL Register bit masks */
+#define EN_MASK (1<<0) /* VMAC enable */
+#define TXRN_MASK (1<<3) /* TX enable */
+#define RXRN_MASK (1<<4) /* RX enable */
+#define DSBC_MASK (1<<8) /* Disable receive broadcast */
+#define ENFL_MASK (1<<10) /* Enable Full-duplex */
+#define PROM_MASK (1<<11) /* Promiscuous mode */
+
+/* Buffer descriptor INFO bit masks */
+#define OWN_MASK (1<<31) /* 0-CPU owns buffer, 1-EMAC owns buffer */
+#define FRST_MASK (1<<16) /* First buffer in chain */
+#define LAST_MASK (1<<17) /* Last buffer in chain */
+#define LEN_MASK 0x000007FF /* last 11 bits */
+#define CRLS (1<<21)
+#define DEFR (1<<22)
+#define DROP (1<<23)
+#define RTRY (1<<24)
+#define LTCL (1<<28)
+#define UFLO (1<<29)
+
+#define FOR_EMAC OWN_MASK
+#define FOR_CPU 0
+
+/* ARC EMAC register set combines entries for MAC and MDIO */
+enum {
+ R_ID = 0,
+ R_STATUS,
+ R_ENABLE,
+ R_CTRL,
+ R_POLLRATE,
+ R_RXERR,
+ R_MISS,
+ R_TX_RING,
+ R_RX_RING,
+ R_ADDRL,
+ R_ADDRH,
+ R_LAFL,
+ R_LAFH,
+ R_MDIO,
+};
+
+#define EMAC_REG_SET(reg_base_addr, reg, val) iowrite32((val), \
+ reg_base_addr + \
+ reg * sizeof(int))
+
+#define EMAC_REG_GET(reg_base_addr, reg) ioread32(reg_base_addr + \
+ reg * sizeof(int))
+
+#define EMAC_REG_OR(b, r, v) EMAC_REG_SET(b, r, EMAC_REG_GET(b, r) | (v))
+#define EMAC_REG_CLR(b, r, v) EMAC_REG_SET(b, r, EMAC_REG_GET(b, r) & ~(v))
+
+#endif /* ARC_EMAC_REGS_H */
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/