Re: [PATCH v2 3/3] PCI/AER: Provide reset_link for firmware firstroot port

From: Bjorn Helgaas
Date: Tue Jun 04 2013 - 14:32:25 EST


On Tue, Jun 4, 2013 at 2:36 AM, Chen Gong <gong.chen@xxxxxxxxxxxxxxx> wrote:
> On Thu, May 30, 2013 at 08:39:29AM -0600, Betty Dall wrote:
>> Date: Thu, 30 May 2013 08:39:29 -0600
>> From: Betty Dall <betty.dall@xxxxxx>
>> To: rjw@xxxxxxx, bhelgaas@xxxxxxxxxx
>> Cc: ying.huang@xxxxxxxxx, linux-acpi@xxxxxxxxxxxxxxx,
>> linux-kernel@xxxxxxxxxxxxxxx, linux-pci@xxxxxxxxxxxxxxx, Betty Dall
>> <betty.dall@xxxxxx>
>> Subject: [PATCH v2 3/3] PCI/AER: Provide reset_link for firmware first root
>> port
>> X-Mailer: git-send-email 1.7.7.6
>>
>> The firmware first path does not install the aerdrv root port
>> service driver, so the firmware first root port does not have
>> a reset_link callback. When a firmware first root port does not have
>> a reset_link callback, use a new default reset_link similar to what
>> we already do for the default_downstream_reset_link(). The firmware
>> first default reset_link brings the root port out of SBR if firmware
>> left it in SBR.
>>
>> Changes since v1:
>> Removed incorrect setting of p2p_ctrl after the read.
>>
>> Signed-off-by: Betty Dall <betty.dall@xxxxxx>
>> ---
>>
>> drivers/pci/pcie/aer/aerdrv_core.c | 36 ++++++++++++++++++++++++++++++++++++
>> 1 files changed, 36 insertions(+), 0 deletions(-)
>>
>>
>> diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c
>> index 8ec8b4f..72f76cd 100644
>> --- a/drivers/pci/pcie/aer/aerdrv_core.c
>> +++ b/drivers/pci/pcie/aer/aerdrv_core.c
>> @@ -413,6 +413,39 @@ static pci_ers_result_t default_downstream_reset_link(struct pci_dev *dev)
>> return PCI_ERS_RESULT_RECOVERED;
>> }
>>
>> +/**
>> + * default_ff_root_port_reset_link - default reset function for firmware
>> + * first Root Port
>> + * @dev: pointer to root port's pci_dev data structure
>> + *
>> + * Invoked when performing link reset at Root Port w/ no aer driver.
>> + * This happens through the firmware first path. Firmware may leave
>> + * the Root Port in SBR and it is the OS responsiblity to bring it out
>> + * of SBR.
>> + */
>> +static pci_ers_result_t default_ff_root_port_reset_link(struct pci_dev *dev)
>> +{
>> + u16 p2p_ctrl;
>> +
>> + /* Read Secondary Bus Reset */
>> + pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &p2p_ctrl);
>> +
>> + /* De-assert Secondary Bus Reset, if it is set */
>> + if (p2p_ctrl & PCI_BRIDGE_CTL_BUS_RESET) {
>> + p2p_ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
>> + pci_write_config_word(dev, PCI_BRIDGE_CONTROL, p2p_ctrl);
>> +
>> + /*
>> + * System software must wait for at least 100ms from the end
>> + * of a reset of one or more device before it is permitted
>> + * to issue Configuration Requests to those devices.
>> + */
>> + msleep(200);
>> + dev_dbg(&dev->dev, "Root Port link has been reset\n");
>> + }
>> + return PCI_ERS_RESULT_RECOVERED;
>> +}
>
> I don't think this function is OK.
> 1) You don't really reset the 2nd Bus but just checking its status.
> I think you should have following steps to reset 2nd Bus:
>
> a. Assert 2nd Bus Reset
> b. wait for some time until this message has been broadcasted well
> c. De-assert 2nd Bus Reset
> d. wait for Trst time
>
> IOW, since we have aer_do_secondary_bus_reset to perform secondary bus
> reset, why you repeat it again?
>
> 2) msleep(200) is too long for kernel. You'd better yield the CPU when
> sleep.
>
>> +
>> static int find_aer_service_iter(struct device *device, void *data)
>> {
>> struct pcie_port_service_driver *service_driver, **drv;
>> @@ -460,6 +493,9 @@ static pci_ers_result_t reset_link(struct pci_dev *dev)
>> status = driver->reset_link(udev);
>> } else if (pci_pcie_type(udev) == PCI_EXP_TYPE_DOWNSTREAM) {
>> status = default_downstream_reset_link(udev);
>> + } else if (pci_pcie_type(udev) == PCI_EXP_TYPE_ROOT_PORT &&
>> + pcie_aer_get_firmware_first(udev)) {
>> + status = default_ff_root_port_reset_link(udev);

Can we just handle Root Ports the same as Downstream Ports, e.g.,

if (pci_pcie_type(udev) == PCI_EXP_TYPE_DOWNSTREAM ||
pci_pcie_type(udev) == PCI_EXP_TYPE_ROOT_PORT)
status = default_downstream_reset_link(udev);

>> } else {
>> dev_printk(KERN_DEBUG, &dev->dev,
>> "no link-reset support at upstream device %s\n",
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>> Please read the FAQ at http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/