[PATCH 3/6] keucr: migrate printk to dev_dbg/info/warn/err
From: Johannes Schilling
Date: Wed Jun 05 2013 - 05:03:53 EST
as per suggestion of checkpatch.pl; this resolves warnings like "Prefer
netdev_info .. then dev_info .. to printk".
Signed-off-by: Laura Lawniczak <laura.lawniczak@xxxxxxxxxxxxxx>
Signed-off-by: Johannes Schilling <of82ecuq@xxxxxxxxxxxxx>
---
drivers/staging/keucr/init.c | 62 ++++++++++++++++++--------------------
drivers/staging/keucr/scsiglue.c | 2 +-
drivers/staging/keucr/smilsub.c | 14 ++++-----
drivers/staging/keucr/smscsi.c | 6 ++--
4 files changed, 41 insertions(+), 43 deletions(-)
diff --git a/drivers/staging/keucr/init.c b/drivers/staging/keucr/init.c
index a0fdffd..0e8ced1 100644
--- a/drivers/staging/keucr/init.c
+++ b/drivers/staging/keucr/init.c
@@ -19,13 +19,13 @@ int ENE_InitMedia(struct us_data *us)
int result;
BYTE MiscReg03 = 0;
- printk(KERN_INFO "--- Init Media ---\n");
+ dev_info("--- Init Media ---\n");
result = ene_read_byte(us, REG_CARD_STATUS, &MiscReg03);
if (result != USB_STOR_XFER_GOOD) {
- printk(KERN_ERR "Read register fail !!\n");
+ dev_err("Read register fail !!\n");
return USB_STOR_TRANSPORT_ERROR;
}
- printk(KERN_INFO "MiscReg03 = %x\n", MiscReg03);
+ dev_info("MiscReg03 = %x\n", MiscReg03);
if (MiscReg03 & 0x02) {
if (!us->SM_Status.Ready && !us->MS_Status.Ready) {
@@ -67,11 +67,11 @@ int ENE_SMInit(struct us_data *us)
int result;
BYTE buf[0x200];
- printk(KERN_INFO "transport --- ENE_SMInit\n");
+ dev_info("transport --- ENE_SMInit\n");
result = ENE_LoadBinCode(us, SM_INIT_PATTERN);
if (result != USB_STOR_XFER_GOOD) {
- printk(KERN_INFO "Load SM Init Code Fail !!\n");
+ dev_info("Load SM Init Code Fail !!\n");
return USB_STOR_TRANSPORT_ERROR;
}
@@ -84,8 +84,7 @@ int ENE_SMInit(struct us_data *us)
result = ENE_SendScsiCmd(us, FDIR_READ, &buf, 0);
if (result != USB_STOR_XFER_GOOD) {
- printk(KERN_ERR
- "Execution SM Init Code Fail !! result = %x\n", result);
+ dev_err("Execution SM Init Code Fail !! result = %x\n", result);
return USB_STOR_TRANSPORT_ERROR;
}
@@ -95,15 +94,15 @@ int ENE_SMInit(struct us_data *us)
us->SM_CardID = buf[2];
if (us->SM_Status.Insert && us->SM_Status.Ready) {
- printk(KERN_INFO "Insert = %x\n", us->SM_Status.Insert);
- printk(KERN_INFO "Ready = %x\n", us->SM_Status.Ready);
- printk(KERN_INFO "WtP = %x\n", us->SM_Status.WtP);
- printk(KERN_INFO "DeviceID = %x\n", us->SM_DeviceID);
- printk(KERN_INFO "CardID = %x\n", us->SM_CardID);
+ dev_info("Insert = %x\n", us->SM_Status.Insert);
+ dev_info("Ready = %x\n", us->SM_Status.Ready);
+ dev_info("WtP = %x\n", us->SM_Status.WtP);
+ dev_info("DeviceID = %x\n", us->SM_DeviceID);
+ dev_info("CardID = %x\n", us->SM_CardID);
media_change = 1;
check_d_media_fmt(us);
} else {
- printk(KERN_ERR "SM Card Not Ready --- %x\n", buf[0]);
+ dev_err("SM Card Not Ready --- %x\n", buf[0]);
return USB_STOR_TRANSPORT_ERROR;
}
@@ -120,7 +119,7 @@ int ENE_LoadBinCode(struct us_data *us, BYTE flag)
/* void *buf; */
PBYTE buf;
- /* printk(KERN_INFO "transport --- ENE_LoadBinCode\n"); */
+ /* dev_info("transport --- ENE_LoadBinCode\n"); */
if (us->BIN_FLAG == flag)
return USB_STOR_TRANSPORT_GOOD;
@@ -130,11 +129,11 @@ int ENE_LoadBinCode(struct us_data *us, BYTE flag)
switch (flag) {
/* For SS */
case SM_INIT_PATTERN:
- printk(KERN_INFO "SM_INIT_PATTERN\n");
+ dev_info("SM_INIT_PATTERN\n");
memcpy(buf, sm_init, 0x800);
break;
case SM_RW_PATTERN:
- printk(KERN_INFO "SM_RW_PATTERN\n");
+ dev_info("SM_RW_PATTERN\n");
memcpy(buf, sm_rdwr, 0x800);
break;
}
@@ -165,12 +164,12 @@ int ENE_SendScsiCmd(struct us_data *us, BYTE fDir, void *buf, int use_sg)
cswlen = 0, partial = 0;
unsigned int residue;
- /* printk(KERN_INFO "transport --- ENE_SendScsiCmd\n"); */
+ /* dev_info("transport --- ENE_SendScsiCmd\n"); */
/* send cmd to out endpoint */
result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
bcb, US_BULK_CB_WRAP_LEN, NULL);
if (result != USB_STOR_XFER_GOOD) {
- printk(KERN_ERR "send cmd to out endpoint fail ---\n");
+ dev_err("send cmd to out endpoint fail ---\n");
return USB_STOR_TRANSPORT_ERROR;
}
@@ -189,7 +188,7 @@ int ENE_SendScsiCmd(struct us_data *us, BYTE fDir, void *buf, int use_sg)
result = usb_stor_bulk_transfer_sg(us, pipe, buf,
transfer_length, 0, &partial);
if (result != USB_STOR_XFER_GOOD) {
- printk(KERN_ERR "data transfer fail ---\n");
+ dev_err("data transfer fail ---\n");
return USB_STOR_TRANSPORT_ERROR;
}
}
@@ -199,14 +198,14 @@ int ENE_SendScsiCmd(struct us_data *us, BYTE fDir, void *buf, int use_sg)
US_BULK_CS_WRAP_LEN, &cswlen);
if (result == USB_STOR_XFER_SHORT && cswlen == 0) {
- printk(KERN_WARNING "Received 0-length CSW; retrying...\n");
+ dev_warn("Received 0-length CSW; retrying...\n");
result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
bcs, US_BULK_CS_WRAP_LEN, &cswlen);
}
if (result == USB_STOR_XFER_STALLED) {
/* get the status again */
- printk(KERN_WARNING "Attempting to get CSW (2nd try)...\n");
+ dev_warn("Attempting to get CSW (2nd try)...\n");
result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
bcs, US_BULK_CS_WRAP_LEN, NULL);
}
@@ -243,7 +242,7 @@ int ENE_Read_Data(struct us_data *us, void *buf, unsigned int length)
struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap *) us->iobuf;
int result;
- /* printk(KERN_INFO "transport --- ENE_Read_Data\n"); */
+ /* dev_info("transport --- ENE_Read_Data\n"); */
/* set up the command wrapper */
memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
@@ -333,37 +332,36 @@ void usb_stor_print_cmd(struct scsi_cmnd *srb)
switch (cmd) {
case TEST_UNIT_READY:
- /* printk(KERN_INFO
+ /* dev_info(
"scsi cmd %X --- SCSIOP_TEST_UNIT_READY\n", cmd); */
break;
case INQUIRY:
- printk(KERN_INFO "scsi cmd %X --- SCSIOP_INQUIRY\n", cmd);
+ dev_info("scsi cmd %X --- SCSIOP_INQUIRY\n", cmd);
break;
case MODE_SENSE:
- printk(KERN_INFO "scsi cmd %X --- SCSIOP_MODE_SENSE\n", cmd);
+ dev_info("scsi cmd %X --- SCSIOP_MODE_SENSE\n", cmd);
break;
case START_STOP:
- printk(KERN_INFO "scsi cmd %X --- SCSIOP_START_STOP\n", cmd);
+ dev_info("scsi cmd %X --- SCSIOP_START_STOP\n", cmd);
break;
case READ_CAPACITY:
- printk(KERN_INFO "scsi cmd %X --- SCSIOP_READ_CAPACITY\n", cmd);
+ dev_info("scsi cmd %X --- SCSIOP_READ_CAPACITY\n", cmd);
break;
case READ_10:
- /* printk(KERN_INFO
+ /* dev_info(
"scsi cmd %X --- SCSIOP_READ,bn = %X, blen = %X\n"
,cmd, bn, blen); */
break;
case WRITE_10:
- /* printk(KERN_INFO
+ /* dev_info(
"scsi cmd %X --- SCSIOP_WRITE,
bn = %X, blen = %X\n" , cmd, bn, blen); */
break;
case ALLOW_MEDIUM_REMOVAL:
- printk(KERN_INFO
- "scsi cmd %X --- SCSIOP_ALLOW_MEDIUM_REMOVAL\n", cmd);
+ dev_info("scsi cmd %X --- SCSIOP_ALLOW_MEDIUM_REMOVAL\n", cmd);
break;
default:
- printk(KERN_INFO "scsi cmd %X --- Other cmd\n", cmd);
+ dev_info("scsi cmd %X --- Other cmd\n", cmd);
break;
}
bn = 0;
diff --git a/drivers/staging/keucr/scsiglue.c b/drivers/staging/keucr/scsiglue.c
index 2894ce7..7f0cf1a 100644
--- a/drivers/staging/keucr/scsiglue.c
+++ b/drivers/staging/keucr/scsiglue.c
@@ -145,7 +145,7 @@ static int command_abort(struct scsi_cmnd *srb)
scsi_lock(us_to_host(us));
if (us->srb != srb) {
scsi_unlock(us_to_host(us));
- printk("-- nothing to abort\n");
+ dev_info("-- nothing to abort\n");
return FAILED;
}
diff --git a/drivers/staging/keucr/smilsub.c b/drivers/staging/keucr/smilsub.c
index b10e8c2..d5e289b 100644
--- a/drivers/staging/keucr/smilsub.c
+++ b/drivers/staging/keucr/smilsub.c
@@ -214,7 +214,7 @@ int Ssfdc_D_ReadSect(struct us_data *us, BYTE *buf, BYTE *redundant)
result = ENE_LoadBinCode(us, SM_RW_PATTERN);
if (result != USB_STOR_XFER_GOOD) {
- printk("Load SM RW Code Fail !!\n");
+ dev_err("Load SM RW Code Fail !!\n");
return USB_STOR_TRANSPORT_ERROR;
}
@@ -266,7 +266,7 @@ int Ssfdc_D_ReadBlock(struct us_data *us, WORD count, BYTE *buf,
result = ENE_LoadBinCode(us, SM_RW_PATTERN);
if (result != USB_STOR_XFER_GOOD) {
- printk("Load SM RW Code Fail !!\n");
+ dev_err("Load SM RW Code Fail !!\n");
return USB_STOR_TRANSPORT_ERROR;
}
@@ -319,7 +319,7 @@ int Ssfdc_D_CopyBlock(struct us_data *us, WORD count, BYTE *buf,
result = ENE_LoadBinCode(us, SM_RW_PATTERN);
if (result != USB_STOR_XFER_GOOD) {
- printk("Load SM RW Code Fail !!\n");
+ dev_err("Load SM RW Code Fail !!\n");
return USB_STOR_TRANSPORT_ERROR;
}
@@ -365,7 +365,7 @@ int Ssfdc_D_WriteSectForCopy(struct us_data *us, BYTE *buf, BYTE *redundant)
result = ENE_LoadBinCode(us, SM_RW_PATTERN);
if (result != USB_STOR_XFER_GOOD) {
- printk("Load SM RW Code Fail !!\n");
+ dev_err("Load SM RW Code Fail !!\n");
return USB_STOR_TRANSPORT_ERROR;
}
@@ -403,7 +403,7 @@ int Ssfdc_D_EraseBlock(struct us_data *us)
result = ENE_LoadBinCode(us, SM_RW_PATTERN);
if (result != USB_STOR_XFER_GOOD) {
- printk("Load SM RW Code Fail !!\n");
+ dev_err("Load SM RW Code Fail !!\n");
return USB_STOR_TRANSPORT_ERROR;
}
@@ -438,7 +438,7 @@ int Ssfdc_D_ReadRedtData(struct us_data *us, BYTE *redundant)
result = ENE_LoadBinCode(us, SM_RW_PATTERN);
if (result != USB_STOR_XFER_GOOD) {
- printk("Load SM RW Code Fail !!\n");
+ dev_err("Load SM RW Code Fail !!\n");
return USB_STOR_TRANSPORT_ERROR;
}
@@ -477,7 +477,7 @@ int Ssfdc_D_WriteRedtData(struct us_data *us, BYTE *redundant)
result = ENE_LoadBinCode(us, SM_RW_PATTERN);
if (result != USB_STOR_XFER_GOOD) {
- printk("Load SM RW Code Fail !!\n");
+ dev_err("Load SM RW Code Fail !!\n");
return USB_STOR_TRANSPORT_ERROR;
}
diff --git a/drivers/staging/keucr/smscsi.c b/drivers/staging/keucr/smscsi.c
index cda2447..9f27b2b 100644
--- a/drivers/staging/keucr/smscsi.c
+++ b/drivers/staging/keucr/smscsi.c
@@ -109,14 +109,14 @@ int SM_SCSI_Read_Capacity(struct us_data *us, struct scsi_cmnd *srb)
WORD bl_len;
BYTE buf[8];
- printk("SM_SCSI_Read_Capacity\n");
+ dev_dbg("SM_SCSI_Read_Capacity\n");
bl_len = 0x200;
bl_num = Ssfdc.MaxLogBlocks * Ssfdc.MaxSectors * Ssfdc.MaxZones - 1;
us->bl_num = bl_num;
- printk("bl_len = %x\n", bl_len);
- printk("bl_num = %x\n", bl_num);
+ dev_dbg("bl_len = %x\n", bl_len);
+ dev_dbg("bl_num = %x\n", bl_num);
buf[0] = (bl_num >> 24) & 0xff;
buf[1] = (bl_num >> 16) & 0xff;
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/