[PATCH -v11 resend 11/11] Move arch/x86 reboot= handling to generic kernel.
From: Robin Holt
Date: Thu Jun 06 2013 - 07:48:31 EST
Merge together the unicore32, arm, and x86 reboot= command line
parameter handling.
Signed-off-by: Robin Holt <holt@xxxxxxx>
To: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Cc: H. Peter Anvin <hpa@xxxxxxxxx>
Cc: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
Cc: Guan Xuetao <gxt@xxxxxxxxxxxxxxx>
Cc: Russ Anderson <rja@xxxxxxx>
Cc: Robin Holt <holt@xxxxxxx>
Cc: Linux Kernel Mailing List <linux-kernel@xxxxxxxxxxxxxxx>
Cc: the arch/x86 maintainers <x86@xxxxxxxxxx>
Cc: Arm Mailing List <linux-arm-kernel@xxxxxxxxxxxxxxxxxxx>
Acked-by: Ingo Molnar <mingo@xxxxxxxxxx>
Acked-by: Guan Xuetao <gxt@xxxxxxxxxxxxxxx>
Acked-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
---
Changes since -v8
- Add missing break statements.
- Change parsing so #ifdef's are no longer needed.
- Switch to using simple_strtoul to make parsing cleaner.
- Add handling of REBOOT_HARD/SOFT
---
Documentation/kernel-parameters.txt | 14 +++-
arch/arm/kernel/process.c | 10 ---
arch/unicore32/kernel/process.c | 10 ---
arch/x86/include/asm/emergency-restart.h | 12 ----
arch/x86/kernel/apic/x2apic_uv_x.c | 2 +-
arch/x86/kernel/reboot.c | 111 +------------------------------
include/linux/reboot.h | 17 +++++
kernel/reboot.c | 76 ++++++++++++++++++++-
8 files changed, 107 insertions(+), 145 deletions(-)
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index c3bfacb..b2945ce 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -2677,9 +2677,17 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
Run specified binary instead of /init from the ramdisk,
used for early userspace startup. See initrd.
- reboot= [BUGS=X86-32,BUGS=ARM,BUGS=IA-64] Rebooting mode
- Format: <reboot_mode>[,<reboot_mode2>[,...]]
- See arch/*/kernel/reboot.c or arch/*/kernel/process.c
+ reboot= [KNL]
+ Format (x86 or x86_64):
+ [w[arm] | c[old] | h[ard] | s[oft] | g[pio]] \
+ [[,]s[mp]#### \
+ [[,]b[ios] | a[cpi] | k[bd] | t[riple] | e[fi] | p[ci]] \
+ [[,]f[orce]
+ Where reboot_mode is one of warm (soft) or cold (hard) or gpio,
+ reboot_type is one of bios, acpi, kbd, triple, efi, or pci,
+ reboot_force is either force or not specified,
+ reboot_cpu is s[mp]#### with #### being the processor
+ to be used for rebooting.
relax_domain_level=
[KNL, SMP] Set scheduler's default relax_domain_level.
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 42856fc..304b102 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -175,16 +175,6 @@ void arch_cpu_idle(void)
default_idle();
}
-enum reboot_mode reboot_mode = REBOOT_HARD;
-
-static int __init reboot_setup(char *str)
-{
- if ('s' == str[0])
- reboot_mode = REBOOT_SOFT;
- return 1;
-}
-__setup("reboot=", reboot_setup);
-
void machine_shutdown(void)
{
#ifdef CONFIG_SMP
diff --git a/arch/unicore32/kernel/process.c b/arch/unicore32/kernel/process.c
index 93dd035..778ebba 100644
--- a/arch/unicore32/kernel/process.c
+++ b/arch/unicore32/kernel/process.c
@@ -51,16 +51,6 @@ void arch_cpu_idle(void)
local_irq_enable();
}
-static enum reboot_mode reboot_mode = REBOOT_HARD;
-
-int __init reboot_setup(char *str)
-{
- if ('s' == str[0])
- reboot_mode = REBOOT_SOFT;
- return 1;
-}
-__setup("reboot=", reboot_setup);
-
void machine_halt(void)
{
gpio_set_value(GPO_SOFT_OFF, 0);
diff --git a/arch/x86/include/asm/emergency-restart.h b/arch/x86/include/asm/emergency-restart.h
index 75ce3f4..77a99ac 100644
--- a/arch/x86/include/asm/emergency-restart.h
+++ b/arch/x86/include/asm/emergency-restart.h
@@ -1,18 +1,6 @@
#ifndef _ASM_X86_EMERGENCY_RESTART_H
#define _ASM_X86_EMERGENCY_RESTART_H
-enum reboot_type {
- BOOT_TRIPLE = 't',
- BOOT_KBD = 'k',
- BOOT_BIOS = 'b',
- BOOT_ACPI = 'a',
- BOOT_EFI = 'e',
- BOOT_CF9 = 'p',
- BOOT_CF9_COND = 'q',
-};
-
-extern enum reboot_type reboot_type;
-
extern void machine_emergency_restart(void);
#endif /* _ASM_X86_EMERGENCY_RESTART_H */
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 794f6eb..958e3e4 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -25,6 +25,7 @@
#include <linux/kdebug.h>
#include <linux/delay.h>
#include <linux/crash_dump.h>
+#include <linux/reboot.h>
#include <asm/uv/uv_mmrs.h>
#include <asm/uv/uv_hub.h>
@@ -36,7 +37,6 @@
#include <asm/ipi.h>
#include <asm/smp.h>
#include <asm/x86_init.h>
-#include <asm/emergency-restart.h>
#include <asm/nmi.h>
/* BMC sets a bit this MMR non-zero before sending an NMI */
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index f770340..563ed91 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -36,22 +36,6 @@ void (*pm_power_off)(void);
EXPORT_SYMBOL(pm_power_off);
static const struct desc_ptr no_idt = {};
-static enum reboot_mode reboot_mode;
-enum reboot_type reboot_type = BOOT_ACPI;
-int reboot_force;
-
-/*
- * This variable is used privately to keep track of whether or not
- * reboot_type is still set to its default value (i.e., reboot= hasn't
- * been set on the command line). This is needed so that we can
- * suppress DMI scanning for reboot quirks. Without it, it's
- * impossible to override a faulty reboot quirk without recompiling.
- */
-static int reboot_default = 1;
-
-#ifdef CONFIG_SMP
-static int reboot_cpu = -1;
-#endif
/*
* This is set if we need to go through the 'emergency' path.
@@ -64,79 +48,6 @@ static int reboot_emergency;
bool port_cf9_safe = false;
/*
- * reboot=b[ios] | s[mp] | t[riple] | k[bd] | e[fi] [, [w]arm | [c]old] | p[ci]
- * warm Don't set the cold reboot flag
- * cold Set the cold reboot flag
- * bios Reboot by jumping through the BIOS
- * smp Reboot by executing reset on BSP or other CPU
- * triple Force a triple fault (init)
- * kbd Use the keyboard controller. cold reset (default)
- * acpi Use the RESET_REG in the FADT
- * efi Use efi reset_system runtime service
- * pci Use the so-called "PCI reset register", CF9
- * force Avoid anything that could hang.
- */
-static int __init reboot_setup(char *str)
-{
- for (;;) {
- /*
- * Having anything passed on the command line via
- * reboot= will cause us to disable DMI checking
- * below.
- */
- reboot_default = 0;
-
- switch (*str) {
- case 'w':
- reboot_mode = REBOOT_WARM;
- break;
-
- case 'c':
- reboot_mode = REBOOT_COLD;
- break;
-
-#ifdef CONFIG_SMP
- case 's':
- if (isdigit(*(str+1))) {
- reboot_cpu = (int) (*(str+1) - '0');
- if (isdigit(*(str+2)))
- reboot_cpu = reboot_cpu*10 + (int)(*(str+2) - '0');
- }
- /*
- * We will leave sorting out the final value
- * when we are ready to reboot, since we might not
- * have detected BSP APIC ID or smp_num_cpu
- */
- break;
-#endif /* CONFIG_SMP */
-
- case 'b':
- case 'a':
- case 'k':
- case 't':
- case 'e':
- case 'p':
- reboot_type = *str;
- break;
-
- case 'f':
- reboot_force = 1;
- break;
- }
-
- str = strchr(str, ',');
- if (str)
- str++;
- else
- break;
- }
- return 1;
-}
-
-__setup("reboot=", reboot_setup);
-
-
-/*
* Reboot options and system auto-detection code provided by
* Dell Inc. so their systems "just work". :-)
*/
@@ -616,26 +527,10 @@ void native_machine_shutdown(void)
{
/* Stop the cpus and apics */
#ifdef CONFIG_SMP
-
- /* The boot cpu is always logical cpu 0 */
- int reboot_cpu_id = 0;
-
- /* See if there has been given a command line override */
- if ((reboot_cpu != -1) && (reboot_cpu < nr_cpu_ids) &&
- cpu_online(reboot_cpu))
- reboot_cpu_id = reboot_cpu;
-
- /* Make certain the cpu I'm about to reboot on is online */
- if (!cpu_online(reboot_cpu_id))
- reboot_cpu_id = smp_processor_id();
-
- /* Make certain I only run on the appropriate processor */
- set_cpus_allowed_ptr(current, cpumask_of(reboot_cpu_id));
-
/*
- * O.K Now that I'm on the appropriate processor, stop all of the
- * others. Also disable the local irq to not receive the per-cpu
- * timer interrupt which may trigger scheduler's load balance.
+ * Stop all of the others. Also disable the local irq to
+ * not receive the per-cpu timer interrupt which may trigger
+ * scheduler's load balance.
*/
local_irq_disable();
stop_other_cpus();
diff --git a/include/linux/reboot.h b/include/linux/reboot.h
index 5a5d7f7..8e00f9f 100644
--- a/include/linux/reboot.h
+++ b/include/linux/reboot.h
@@ -17,6 +17,23 @@ enum reboot_mode {
REBOOT_SOFT,
REBOOT_GPIO,
};
+extern enum reboot_mode reboot_mode;
+
+enum reboot_type {
+ BOOT_TRIPLE = 't',
+ BOOT_KBD = 'k',
+ BOOT_BIOS = 'b',
+ BOOT_ACPI = 'a',
+ BOOT_EFI = 'e',
+ BOOT_CF9 = 'p',
+ BOOT_CF9_COND = 'q',
+};
+extern enum reboot_type reboot_type;
+
+extern int reboot_default;
+extern int reboot_cpu;
+extern int reboot_force;
+
extern int register_reboot_notifier(struct notifier_block *);
extern int unregister_reboot_notifier(struct notifier_block *);
diff --git a/kernel/reboot.c b/kernel/reboot.c
index abb6a04..269ed93 100644
--- a/kernel/reboot.c
+++ b/kernel/reboot.c
@@ -6,6 +6,7 @@
#define pr_fmt(fmt) "reboot: " fmt
+#include <linux/ctype.h>
#include <linux/export.h>
#include <linux/kexec.h>
#include <linux/kmod.h>
@@ -24,6 +25,18 @@ int C_A_D = 1;
struct pid *cad_pid;
EXPORT_SYMBOL(cad_pid);
+#if defined(CONFIG_ARM) || defined(CONFIG_UNICORE32)
+#define DEFAULT_REBOOT_MODE = REBOOT_HARD
+#else
+#define DEFAULT_REBOOT_MODE
+#endif
+enum reboot_mode reboot_mode DEFAULT_REBOOT_MODE;
+
+int reboot_default;
+int reboot_cpu;
+enum reboot_type reboot_type = BOOT_ACPI;
+int reboot_force;
+
/*
* If set, this is used for preparing the system to power off.
*/
@@ -87,7 +100,7 @@ EXPORT_SYMBOL(unregister_reboot_notifier);
static void migrate_to_reboot_cpu(void)
{
/* The boot cpu is always logical cpu 0 */
- int cpu = 0;
+ int cpu = reboot_cpu;
cpu_hotplug_disable();
@@ -343,3 +356,64 @@ int orderly_poweroff(bool force)
return 0;
}
EXPORT_SYMBOL_GPL(orderly_poweroff);
+
+static int __init reboot_setup(char *str)
+{
+ for (;;) {
+ /*
+ * Having anything passed on the command line via
+ * reboot= will cause us to disable DMI checking
+ * below.
+ */
+ reboot_default = 0;
+
+ switch (*str) {
+ case 'w':
+ reboot_mode = REBOOT_WARM;
+ break;
+
+ case 'c':
+ reboot_mode = REBOOT_COLD;
+ break;
+
+ case 'h':
+ reboot_mode = REBOOT_HARD;
+ break;
+
+ case 's':
+ if (isdigit(*(str+1)))
+ reboot_cpu = simple_strtoul(str+1, NULL, 0);
+ else if (str[1] == 'm' && str[2] == 'p' &&
+ isdigit(*(str+3)))
+ reboot_cpu = simple_strtoul(str+3, NULL, 0);
+ else
+ reboot_mode = REBOOT_SOFT;
+ break;
+
+ case 'g':
+ reboot_mode = REBOOT_GPIO;
+ break;
+
+ case 'b':
+ case 'a':
+ case 'k':
+ case 't':
+ case 'e':
+ case 'p':
+ reboot_type = *str;
+ break;
+
+ case 'f':
+ reboot_force = 1;
+ break;
+ }
+
+ str = strchr(str, ',');
+ if (str)
+ str++;
+ else
+ break;
+ }
+ return 1;
+}
+__setup("reboot=", reboot_setup);
--
1.8.2.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/