Re: [PATCH] xen/blkback: Check for insane amounts of request on thering.

[Konrad Rzeszutek Wilk]

On Tue, Jun 04, 2013 at 03:57:06PM -0400, Konrad Rzeszutek Wilk wrote:
> Check that the ring does not have an insane amount of requests
> (more than there could fit on the ring).
> 
> If we detect this case we will stop processing the requests
> and wait until the XenBus disconnects the ring.
> 
> Looking at the code, one would expect that the existing check
> RING_REQUEST_CONS_OVERFLOW which checks for how many responses we
> have created in the past (rsp_prod_pvt) vs requests consumed (req_cons)
> and that difference between is greater or equal to the size of the
> ring. If that condition is satisfied that means we should not be
> processing more requests as we still have a backlog of responses
> to finish. Note that both of those values (rsp_prod_pvt and req_cons)
> are not exposed on the shared ring.
> 
> To understand this problem a mini crash course in ring protocol
> response/request updates.
> 
> There are four entries: req_prod and rsp_prod; req_event and rsp_event.
> We are only concerned about the first two - which set the tone of
> this bug.
> 
> The req_prod is a value incremented by frontend for each request put
> on the ring. Conversely the rsp_prod is a value incremented by the backend
> for each response put on the ring (rsp_prod gets set by rsp_prod_pvt when
> pushing the responses on the ring).  Both values can
> wrap and are modulo the size of the ring (in block case that is 32).
> Please see RING_GET_REQUEST and RING_GET_RESPONSE for the more details.
> 
> The culprit here is that if the difference between the
> req_prod and req_cons is greater than the ring size we have a problem.
> Fortunately for us, the '__do_block_io_op' loop:
> 
> 	rc = blk_rings->common.req_cons;
> 	rp = blk_rings->common.sring->req_prod;
> 
> 	while (rc != rp) {
> 
> 		..
> 		blk_rings->common.req_cons = ++rc; /* before make_response() */
> 
> 	}
> 
> will loop up to the point when rc == rp. The macros inside of the
> loop (RING_GET_REQUEST) is smart and is indexing based on the modulo
> of the ring size. If the frontend has provided a bogus req_prod value
> we will loop until the 'rc == rp' - which means we could be processing
> already processed requests (or responses) often.
> 
> The reason the RING_REQUEST_CONS_OVERFLOW is not helping here is
> b/c it only tracks how many responses we have internally produced
> and whether we would should process more. The astute reader will
> notice that the macro RING_REQUEST_CONS_OVERFLOW provides two
> arguments - more on this later.
> 
> For example, if we were to enter this function with these values:
> 
>        	blk_rings->common.sring->req_prod =  X+31415 (X is the value from
> 		the last time __do_block_io_op was called).
>         blk_rings->common.req_cons = X
>         blk_rings->common.rsp_prod_pvt = X
> 
> The RING_REQUEST_CONS_OVERFLOW(&blk_rings->common, blk_rings->common.req_cons)
> is doing:
> 
> 	req_cons - sring->rsp_prod_pvt >= 32
> 
> Which is,
> 	X - X >= 32 or 0 >= 32
> 
> And that is false, so we continue on looping (this bug).
> 
> If we re-use said macro RING_REQUEST_CONS_OVERFLOW and pass in the rp
> instead (sring->req_prod) of rc, the this macro can do the check:
> 
>      req_prod - sring->rsp_prov_pvt >= 32
> 
> Which is,
>        X + 31415 - X >= 32 , or 31415 >= 32
> 
> which is true, so we can error out and break out of the function.
> 
> Cc: stable@xxxxxxxxxxxxxxx
> [v1: Move the check outside the loop]
> [v2: Add a pr_warn as suggested by David]
> [v3: Use RING_REQUEST_CONS_OVERFLOW as suggested by Jan]
> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
> ---
>  drivers/block/xen-blkback/blkback.c | 14 ++++++++++++--
>  drivers/block/xen-blkback/common.h  |  2 ++
>  drivers/block/xen-blkback/xenbus.c  |  2 ++
>  3 files changed, 16 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/block/xen-blkback/blkback.c b/drivers/block/xen-blkback/blkback.c
> index d81dfca..c4b23be 100644
> --- a/drivers/block/xen-blkback/blkback.c
> +++ b/drivers/block/xen-blkback/blkback.c
> @@ -397,7 +397,7 @@ int xen_blkif_schedule(void *arg)
>  {
>  	struct xen_blkif *blkif = arg;
>  	struct xen_vbd *vbd = &blkif->vbd;
> -
> +	int rc = 0;
>  	xen_blkif_get(blkif);
>  
>  	while (!kthread_should_stop()) {
> @@ -417,8 +417,12 @@ int xen_blkif_schedule(void *arg)
>  		blkif->waiting_reqs = 0;
>  		smp_mb(); /* clear flag *before* checking for work */
>  
> -		if (do_block_io_op(blkif))
> +		rc = do_block_io_op(blkif);
> +		if (rc > 0)
>  			blkif->waiting_reqs = 1;
> +		if (rc == -EACCES)
> +			wait_event_interruptible(blkif->shutdown_wq,
> +						 kthread_should_stop());
>  
>  		if (log_stats && time_after(jiffies, blkif->st_print))
>  			print_stats(blkif);
> @@ -778,6 +782,12 @@ __do_block_io_op(struct xen_blkif *blkif)
>  	rp = blk_rings->common.sring->req_prod;
>  	rmb(); /* Ensure we see queued requests up to 'rp'. */
>  
> +	/* N.B. 'rp', not 'rc'. */
> +	if (RING_REQUEST_CONS_OVERFLOW(&blk_rings->common, rp)) {
> +		pr_warn(DRV_PFX "Frontend provided bogus ring requests (%d - %d = %d). Halting ring processing on dev=%04x\n",
> +			rp, rc, rp - rc, blkif->vbd.pdevice);

Hm, I seem to be able to get:

[  189.398095] xen-blkback:Frontend provided bogus ring requests (125 - 115 = 10). Halting ring processing on dev=800011
or:
[  478.558699] xen-blkback:Frontend provided bogus ring requests (95 - 94 = 1). Halting ring processing on dev=800011

Which is clearly wrong. Piggybacking on the rsp_prod_pvt does not seem to cut it.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/