Re: [PATCH 3/3] gpio: msm: Add device tree and irqdomain support for gpio-msm-v2

From: Grant Likely
Date: Tue Jun 11 2013 - 08:45:59 EST

On Mon, 10 Jun 2013 15:50:21 -0700, Rohit Vaswani <rvaswani@xxxxxxxxxxxxxx> wrote:
> This cleans up the gpio-msm-v2 driver of all the global define usage.
> The number of gpios are now defined in the device tree. This enables
> adding irqdomain support as well.
>
> Signed-off-by: Rohit Vaswani <rvaswani@xxxxxxxxxxxxxx>

Looks good to me. Go ahead and take it through the same tree as patches
1/3 and 2/3 with my ack since it appears that the patches need to be
applied together.

Acked-by: Grant Likely <grant.likely@xxxxxxxxxx>

g.

> ---
> .../devicetree/bindings/gpio/gpio-msm.txt | 26 +++
> arch/arm/boot/dts/msm8660-surf.dts | 11 ++
> arch/arm/boot/dts/msm8960-cdp.dts | 11 ++
> drivers/gpio/Kconfig | 2 +-
> drivers/gpio/gpio-msm-v2.c | 190 ++++++++++++--------
> 5 files changed, 162 insertions(+), 78 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/gpio/gpio-msm.txt
>
> diff --git a/Documentation/devicetree/bindings/gpio/gpio-msm.txt b/Documentation/devicetree/bindings/gpio/gpio-msm.txt
> new file mode 100644
> index 0000000..ac20e68
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/gpio-msm.txt
> @@ -0,0 +1,26 @@
> +MSM GPIO controller bindings
> +
> +Required properties:
> +- compatible:
> + - "qcom,msm-gpio" for MSM controllers
> +- #gpio-cells : Should be two.
> + - first cell is the pin number
> + - second cell is used to specify optional parameters (unused)
> +- gpio-controller : Marks the device node as a GPIO controller.
> +- #interrupt-cells : Should be 2.
> +- interrupt-controller: Mark the device node as an interrupt controller
> +- interrupts : Specify the TLMM summary interrupt number
> +- ngpio : Specify the number of MSM GPIOs
> +
> +Example:
> +
> + msmgpio: gpio@fd510000 {
> + compatible = "qcom,msm-gpio";
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + reg = <0xfd510000 0x4000>;
> + interrupts = <0 208 0>;
> + ngpio = <150>;
> + };
> diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/msm8660-surf.dts
> index 9bf49b3..8931906 100644
> --- a/arch/arm/boot/dts/msm8660-surf.dts
> +++ b/arch/arm/boot/dts/msm8660-surf.dts
> @@ -26,6 +26,17 @@
> cpu-offset = <0x40000>;
> };
>
> + msmgpio: gpio@800000 {
> + compatible = "qcom,msm-gpio";
> + reg = <0x00800000 0x1000>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + ngpio = <173>;
> + interrupts = <0 32 0x4>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> serial@19c400000 {
> compatible = "qcom,msm-hsuart", "qcom,msm-uart";
> reg = <0x19c40000 0x1000>,
> diff --git a/arch/arm/boot/dts/msm8960-cdp.dts b/arch/arm/boot/dts/msm8960-cdp.dts
> index 2e4d87a..52fe253 100644
> --- a/arch/arm/boot/dts/msm8960-cdp.dts
> +++ b/arch/arm/boot/dts/msm8960-cdp.dts
> @@ -26,6 +26,17 @@
> cpu-offset = <0x80000>;
> };
>
> + msmgpio: gpio@fd510000 {
> + compatible = "qcom,msm-gpio";
> + gpio-controller;
> + #gpio-cells = <2>;
> + ngpio = <150>;
> + interrupts = <0 32 0x4>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + reg = <0xfd510000 0x4000>;
> + };
> +
> serial@19c400000 {
> compatible = "qcom,msm-hsuart", "qcom,msm-uart";
> reg = <0x16440000 0x1000>,
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index 87d5670..6d61a12 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -165,7 +165,7 @@ config GPIO_MSM_V1
>
> config GPIO_MSM_V2
> tristate "Qualcomm MSM GPIO v2"
> - depends on GPIOLIB && ARCH_MSM
> + depends on GPIOLIB && OF && ARCH_MSM
> help
> Say yes here to support the GPIO interface on ARM v7 based
> Qualcomm MSM chips. Most of the pins on the MSM can be
> diff --git a/drivers/gpio/gpio-msm-v2.c b/drivers/gpio/gpio-msm-v2.c
> index 75cc821..f4491a4 100644
> --- a/drivers/gpio/gpio-msm-v2.c
> +++ b/drivers/gpio/gpio-msm-v2.c
> @@ -19,17 +19,21 @@
>
> #include <linux/bitmap.h>
> #include <linux/bitops.h>
> +#include <linux/err.h>
> #include <linux/gpio.h>
> #include <linux/init.h>
> #include <linux/interrupt.h>
> #include <linux/io.h>
> #include <linux/irqchip/chained_irq.h>
> #include <linux/irq.h>
> +#include <linux/irqdomain.h>
> #include <linux/module.h>
> +#include <linux/of_address.h>
> #include <linux/platform_device.h>
> #include <linux/spinlock.h>
> +#include <linux/slab.h>
>
> -#include <mach/msm_iomap.h>
> +#define MAX_NR_GPIO 300
>
> /* Bits of interest in the GPIO_IN_OUT register.
> */
> @@ -76,13 +80,6 @@ enum {
> TARGET_PROC_NONE = 7,
> };
>
> -
> -#define GPIO_INTR_CFG_SU(gpio) (MSM_TLMM_BASE + 0x0400 + (0x04 * (gpio)))
> -#define GPIO_CONFIG(gpio) (MSM_TLMM_BASE + 0x1000 + (0x10 * (gpio)))
> -#define GPIO_IN_OUT(gpio) (MSM_TLMM_BASE + 0x1004 + (0x10 * (gpio)))
> -#define GPIO_INTR_CFG(gpio) (MSM_TLMM_BASE + 0x1008 + (0x10 * (gpio)))
> -#define GPIO_INTR_STATUS(gpio) (MSM_TLMM_BASE + 0x100c + (0x10 * (gpio)))
> -
> /**
> * struct msm_gpio_dev: the MSM8660 SoC GPIO device structure
> *
> @@ -101,11 +98,27 @@ enum {
> */
> struct msm_gpio_dev {
> struct gpio_chip gpio_chip;
> - DECLARE_BITMAP(enabled_irqs, NR_GPIO_IRQS);
> - DECLARE_BITMAP(wake_irqs, NR_GPIO_IRQS);
> - DECLARE_BITMAP(dual_edge_irqs, NR_GPIO_IRQS);
> + DECLARE_BITMAP(enabled_irqs, MAX_NR_GPIO);
> + DECLARE_BITMAP(wake_irqs, MAX_NR_GPIO);
> + DECLARE_BITMAP(dual_edge_irqs, MAX_NR_GPIO);
> + struct irq_domain *domain;
> + unsigned int summary_irq;
> + void __iomem *msm_tlmm_base;
> };
>
> +struct msm_gpio_dev msm_gpio;

As commented before; this is okay for now, but you should have a
follow-on patch to make msm_gpio allocated dymically in the probe
function.

> +
> +#define GPIO_INTR_CFG_SU(gpio) (msm_gpio.msm_tlmm_base + 0x0400 + \
> + (0x04 * (gpio)))
> +#define GPIO_CONFIG(gpio) (msm_gpio.msm_tlmm_base + 0x1000 + \
> + (0x10 * (gpio)))
> +#define GPIO_IN_OUT(gpio) (msm_gpio.msm_tlmm_base + 0x1004 + \
> + (0x10 * (gpio)))
> +#define GPIO_INTR_CFG(gpio) (msm_gpio.msm_tlmm_base + 0x1008 + \
> + (0x10 * (gpio)))
> +#define GPIO_INTR_STATUS(gpio) (msm_gpio.msm_tlmm_base + 0x100c + \
> + (0x10 * (gpio)))
> +
> static DEFINE_SPINLOCK(tlmm_lock);
>
> static inline struct msm_gpio_dev *to_msm_gpio_dev(struct gpio_chip *chip)
> @@ -168,27 +181,19 @@ static void msm_gpio_free(struct gpio_chip *chip, unsigned offset)
>
> static int msm_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
> {
> - return MSM_GPIO_TO_INT(chip->base + offset);
> + struct msm_gpio_dev *g_dev = to_msm_gpio_dev(chip);
> + struct irq_domain *domain = g_dev->domain;
> +
> + return irq_create_mapping(domain, offset);
> }
>
> static inline int msm_irq_to_gpio(struct gpio_chip *chip, unsigned irq)
> {
> - return irq - MSM_GPIO_TO_INT(chip->base);
> + struct irq_data *irq_data = irq_get_irq_data(irq);
> +
> + return irq_data->hwirq;
> }
>
> -static struct msm_gpio_dev msm_gpio = {
> - .gpio_chip = {
> - .base = 0,
> - .ngpio = NR_GPIO_IRQS,
> - .direction_input = msm_gpio_direction_input,
> - .direction_output = msm_gpio_direction_output,
> - .get = msm_gpio_get,
> - .set = msm_gpio_set,
> - .to_irq = msm_gpio_to_irq,
> - .request = msm_gpio_request,
> - .free = msm_gpio_free,
> - },
> -};

This block has been deleted and replaced by open-coding the assignments
in msm_gpio_probe(). It is true that some of the values need to be set
at runtime (.ngpio for example), but the majority of them
>
> /* For dual-edge interrupts in software, since the hardware has no
> * such support:
> @@ -226,9 +231,9 @@ static void msm_gpio_update_dual_edge_pos(unsigned gpio)
> if (intstat || val == val2)
> return;
> } while (loop_limit-- > 0);
> - pr_err("dual-edge irq failed to stabilize, "
> + pr_err("%s: dual-edge irq failed to stabilize, "
> "interrupts dropped. %#08x != %#08x\n",
> - val, val2);
> + __func__, val, val2);
> }
>
> static void msm_gpio_irq_ack(struct irq_data *d)
> @@ -315,10 +320,10 @@ static void msm_summary_irq_handler(unsigned int irq, struct irq_desc *desc)
>
> chained_irq_enter(chip, desc);
>
> - for_each_set_bit(i, msm_gpio.enabled_irqs, NR_GPIO_IRQS) {
> + for_each_set_bit(i, msm_gpio.enabled_irqs, MAX_NR_GPIO) {
> if (readl(GPIO_INTR_STATUS(i)) & BIT(INTR_STATUS))
> - generic_handle_irq(msm_gpio_to_irq(&msm_gpio.gpio_chip,
> - i));
> + generic_handle_irq(irq_find_mapping(msm_gpio.domain,
> + i));
> }
>
> chained_irq_exit(chip, desc);
> @@ -329,13 +334,13 @@ static int msm_gpio_irq_set_wake(struct irq_data *d, unsigned int on)
> int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, d->irq);
>
> if (on) {
> - if (bitmap_empty(msm_gpio.wake_irqs, NR_GPIO_IRQS))
> - irq_set_irq_wake(TLMM_SCSS_SUMMARY_IRQ, 1);
> + if (bitmap_empty(msm_gpio.wake_irqs, MAX_NR_GPIO))
> + irq_set_irq_wake(msm_gpio.summary_irq, 1);
> set_bit(gpio, msm_gpio.wake_irqs);
> } else {
> clear_bit(gpio, msm_gpio.wake_irqs);
> - if (bitmap_empty(msm_gpio.wake_irqs, NR_GPIO_IRQS))
> - irq_set_irq_wake(TLMM_SCSS_SUMMARY_IRQ, 0);
> + if (bitmap_empty(msm_gpio.wake_irqs, MAX_NR_GPIO))
> + irq_set_irq_wake(msm_gpio.summary_irq, 0);
> }
>
> return 0;
> @@ -350,30 +355,86 @@ static struct irq_chip msm_gpio_irq_chip = {
> .irq_set_wake = msm_gpio_irq_set_wake,
> };
>
> -static int msm_gpio_probe(struct platform_device *dev)
> +static struct lock_class_key msm_gpio_lock_class;
> +
> +static int msm_gpio_irq_domain_map(struct irq_domain *d, unsigned int irq,
> + irq_hw_number_t hwirq)
> +{
> + irq_set_lockdep_class(irq, &msm_gpio_lock_class);
> + irq_set_chip_and_handler(irq, &msm_gpio_irq_chip,
> + handle_level_irq);
> + set_irq_flags(irq, IRQF_VALID);
> +
> + return 0;
> +}
> +
> +static const struct irq_domain_ops msm_gpio_irq_domain_ops = {
> + .xlate = irq_domain_xlate_twocell,
> + .map = msm_gpio_irq_domain_map,
> +};
> +
> +static int msm_gpio_probe(struct platform_device *pdev)
> {
> - int i, irq, ret;
> + int ret, ngpio;
> + struct resource *res;
> +
> + if (!of_property_read_u32(pdev->dev.of_node, "ngpio", &ngpio)) {
> + dev_err(&pdev->dev, "%s: ngpio property missing\n", __func__);
> + return -EINVAL;
> + }
> +
> + if (ngpio > MAX_NR_GPIO)
> + WARN(1, "ngpio exceeds the MAX_NR_GPIO. Increase MAX_NR_GPIO\n");
> +
> + bitmap_zero(msm_gpio.enabled_irqs, MAX_NR_GPIO);
> + bitmap_zero(msm_gpio.wake_irqs, MAX_NR_GPIO);
> + bitmap_zero(msm_gpio.dual_edge_irqs, MAX_NR_GPIO);
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + msm_gpio.msm_tlmm_base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(msm_gpio.msm_tlmm_base))
> + return PTR_ERR(msm_gpio.msm_tlmm_base);
> +
> + msm_gpio.gpio_chip.ngpio = ngpio;
> + msm_gpio.gpio_chip.label = pdev->name;
> + msm_gpio.gpio_chip.dev = &pdev->dev;
> + msm_gpio.gpio_chip.base = 0;
> + msm_gpio.gpio_chip.direction_input = msm_gpio_direction_input;
> + msm_gpio.gpio_chip.direction_output = msm_gpio_direction_output;
> + msm_gpio.gpio_chip.get = msm_gpio_get;
> + msm_gpio.gpio_chip.set = msm_gpio_set;
> + msm_gpio.gpio_chip.to_irq = msm_gpio_to_irq;
> + msm_gpio.gpio_chip.request = msm_gpio_request;
> + msm_gpio.gpio_chip.free = msm_gpio_free;
>
> - bitmap_zero(msm_gpio.enabled_irqs, NR_GPIO_IRQS);
> - bitmap_zero(msm_gpio.wake_irqs, NR_GPIO_IRQS);
> - bitmap_zero(msm_gpio.dual_edge_irqs, NR_GPIO_IRQS);
> - msm_gpio.gpio_chip.label = dev->name;
> ret = gpiochip_add(&msm_gpio.gpio_chip);
> - if (ret < 0)
> + if (ret < 0) {
> + dev_err(&pdev->dev, "gpiochip_add failed with error %d\n", ret);
> return ret;
> + }
>
> - for (i = 0; i < msm_gpio.gpio_chip.ngpio; ++i) {
> - irq = msm_gpio_to_irq(&msm_gpio.gpio_chip, i);
> - irq_set_chip_and_handler(irq, &msm_gpio_irq_chip,
> - handle_level_irq);
> - set_irq_flags(irq, IRQF_VALID);
> + msm_gpio.summary_irq = platform_get_irq(pdev, 0);
> + if (msm_gpio.summary_irq < 0) {
> + dev_err(&pdev->dev, "No Summary irq defined for msmgpio\n");
> + return msm_gpio.summary_irq;
> }
>
> - irq_set_chained_handler(TLMM_SCSS_SUMMARY_IRQ,
> - msm_summary_irq_handler);
> + msm_gpio.domain = irq_domain_add_linear(pdev->dev.of_node, ngpio,
> + &msm_gpio_irq_domain_ops,
> + &msm_gpio);
> + if (!msm_gpio.domain)
> + return -ENODEV;
> +
> + irq_set_chained_handler(msm_gpio.summary_irq, msm_summary_irq_handler);
> +
> return 0;
> }
>
> +static struct of_device_id msm_gpio_of_match[] = {
> + { .compatible = "qcom,msm-gpio", },
> + { },
> +};
> +
> static int msm_gpio_remove(struct platform_device *dev)
> {
> int ret = gpiochip_remove(&msm_gpio.gpio_chip);
> @@ -381,7 +442,7 @@ static int msm_gpio_remove(struct platform_device *dev)
> if (ret < 0)
> return ret;
>
> - irq_set_handler(TLMM_SCSS_SUMMARY_IRQ, NULL);
> + irq_set_handler(msm_gpio.summary_irq, NULL);
>
> return 0;
> }
> @@ -392,36 +453,11 @@ static struct platform_driver msm_gpio_driver = {
> .driver = {
> .name = "msmgpio",
> .owner = THIS_MODULE,
> + .of_match_table = msm_gpio_of_match,
> },
> };
>
> -static struct platform_device msm_device_gpio = {
> - .name = "msmgpio",
> - .id = -1,
> -};
> -
> -static int __init msm_gpio_init(void)
> -{
> - int rc;
> -
> - rc = platform_driver_register(&msm_gpio_driver);
> - if (!rc) {
> - rc = platform_device_register(&msm_device_gpio);
> - if (rc)
> - platform_driver_unregister(&msm_gpio_driver);
> - }
> -
> - return rc;
> -}
> -
> -static void __exit msm_gpio_exit(void)
> -{
> - platform_device_unregister(&msm_device_gpio);
> - platform_driver_unregister(&msm_gpio_driver);
> -}
> -
> -postcore_initcall(msm_gpio_init);
> -module_exit(msm_gpio_exit);
> +module_platform_driver(msm_gpio_driver)
>
> MODULE_AUTHOR("Gregory Bean <gbean@xxxxxxxxxxxxxx>");
> MODULE_DESCRIPTION("Driver for Qualcomm MSM TLMMv2 SoC GPIOs");
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> hosted by The Linux Foundation
>

--
Grant Likely, B.Sc, P.Eng.
Secret Lab Technologies, Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/