[PATCH V5 08/30] thermal: exynos: Add missing definations and code cleanup

[Amit Daniel Kachhap]

This patch adds some extra register bitfield definations and cleans
up the code to prepare for moving register macros and definations inside
the TMU data section.

Acked-by: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
Signed-off-by: Amit Daniel Kachhap <amit.daniel@xxxxxxxxxxx>
---
 drivers/thermal/samsung/exynos_tmu.c |   62 +++++++++++++++++++++++++---------
 1 files changed, 46 insertions(+), 16 deletions(-)

diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 5df04a1..fa33a48 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -43,9 +43,12 @@
 
 #define EXYNOS_TMU_TRIM_TEMP_MASK	0xff
 #define EXYNOS_TMU_GAIN_SHIFT		8
+#define EXYNOS_TMU_GAIN_MASK		0xf
 #define EXYNOS_TMU_REF_VOLTAGE_SHIFT	24
-#define EXYNOS_TMU_CORE_ON		3
-#define EXYNOS_TMU_CORE_OFF		2
+#define EXYNOS_TMU_REF_VOLTAGE_MASK	0x1f
+#define EXYNOS_TMU_BUF_SLOPE_SEL_MASK	0xf
+#define EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT	8
+#define EXYNOS_TMU_CORE_EN_SHIFT	0
 #define EXYNOS_TMU_DEF_CODE_TO_TEMP_OFFSET	50
 
 /* Exynos4210 specific registers */
@@ -63,6 +66,7 @@
 #define EXYNOS4210_TMU_TRIG_LEVEL1_MASK	0x10
 #define EXYNOS4210_TMU_TRIG_LEVEL2_MASK	0x100
 #define EXYNOS4210_TMU_TRIG_LEVEL3_MASK	0x1000
+#define EXYNOS4210_TMU_TRIG_LEVEL_MASK	0x1111
 #define EXYNOS4210_TMU_INTCLEAR_VAL	0x1111
 
 /* Exynos5250 and Exynos4412 specific registers */
@@ -72,17 +76,30 @@
 #define EXYNOS_EMUL_CON		0x80
 
 #define EXYNOS_TRIMINFO_RELOAD		0x1
+#define EXYNOS_TRIMINFO_SHIFT		0x0
+#define EXYNOS_TMU_RISE_INT_MASK	0x111
+#define EXYNOS_TMU_RISE_INT_SHIFT	0
+#define EXYNOS_TMU_FALL_INT_MASK	0x111
+#define EXYNOS_TMU_FALL_INT_SHIFT	12
 #define EXYNOS_TMU_CLEAR_RISE_INT	0x111
 #define EXYNOS_TMU_CLEAR_FALL_INT	(0x111 << 12)
-#define EXYNOS_MUX_ADDR_VALUE		6
-#define EXYNOS_MUX_ADDR_SHIFT		20
 #define EXYNOS_TMU_TRIP_MODE_SHIFT	13
+#define EXYNOS_TMU_TRIP_MODE_MASK	0x7
+
+#define EXYNOS_TMU_INTEN_RISE0_SHIFT	0
+#define EXYNOS_TMU_INTEN_RISE1_SHIFT	4
+#define EXYNOS_TMU_INTEN_RISE2_SHIFT	8
+#define EXYNOS_TMU_INTEN_RISE3_SHIFT	12
+#define EXYNOS_TMU_INTEN_FALL0_SHIFT	16
+#define EXYNOS_TMU_INTEN_FALL1_SHIFT	20
+#define EXYNOS_TMU_INTEN_FALL2_SHIFT	24
 
 #define EFUSE_MIN_VALUE 40
 #define EFUSE_MAX_VALUE 100
 
 #ifdef CONFIG_THERMAL_EMULATION
 #define EXYNOS_EMUL_TIME	0x57F0
+#define EXYNOS_EMUL_TIME_MASK	0xffff
 #define EXYNOS_EMUL_TIME_SHIFT	16
 #define EXYNOS_EMUL_DATA_SHIFT	8
 #define EXYNOS_EMUL_DATA_MASK	0xFF
@@ -261,24 +278,37 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
 	mutex_lock(&data->lock);
 	clk_enable(data->clk);
 
-	con = pdata->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT |
-		pdata->gain << EXYNOS_TMU_GAIN_SHIFT;
+	con = readl(data->base + EXYNOS_TMU_REG_CONTROL);
 
-	if (data->soc == SOC_ARCH_EXYNOS) {
-		con |= pdata->noise_cancel_mode << EXYNOS_TMU_TRIP_MODE_SHIFT;
-		con |= (EXYNOS_MUX_ADDR_VALUE << EXYNOS_MUX_ADDR_SHIFT);
+	if (pdata->reference_voltage) {
+		con &= ~(EXYNOS_TMU_REF_VOLTAGE_MASK <<
+				EXYNOS_TMU_REF_VOLTAGE_SHIFT);
+		con |= pdata->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT;
+	}
+
+	if (pdata->gain) {
+		con &= ~(EXYNOS_TMU_GAIN_MASK << EXYNOS_TMU_GAIN_SHIFT);
+		con |= (pdata->gain << EXYNOS_TMU_GAIN_SHIFT);
+	}
+
+	if (pdata->noise_cancel_mode) {
+		con &= ~(EXYNOS_TMU_TRIP_MODE_MASK <<
+					EXYNOS_TMU_TRIP_MODE_SHIFT);
+		con |= (pdata->noise_cancel_mode << EXYNOS_TMU_TRIP_MODE_SHIFT);
 	}
 
 	if (on) {
-		con |= EXYNOS_TMU_CORE_ON;
-		interrupt_en = pdata->trigger_level3_en << 12 |
-			pdata->trigger_level2_en << 8 |
-			pdata->trigger_level1_en << 4 |
-			pdata->trigger_level0_en;
+		con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
+		interrupt_en =
+		pdata->trigger_level3_en << EXYNOS_TMU_INTEN_RISE3_SHIFT |
+		pdata->trigger_level2_en << EXYNOS_TMU_INTEN_RISE2_SHIFT |
+		pdata->trigger_level1_en << EXYNOS_TMU_INTEN_RISE1_SHIFT |
+		pdata->trigger_level0_en << EXYNOS_TMU_INTEN_RISE0_SHIFT;
 		if (pdata->threshold_falling)
-			interrupt_en |= interrupt_en << 16;
+			interrupt_en |=
+				interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT;
 	} else {
-		con |= EXYNOS_TMU_CORE_OFF;
+		con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
 		interrupt_en = 0; /* Disable all interrupts */
 	}
 	writel(interrupt_en, data->base + EXYNOS_TMU_REG_INTEN);
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/