[PATCH v2] sound/sgtl5000: fix codec register initial values and mask

[Oskar Schirmer]

According to documentation bit 3:2 in register SSS_CTRL are
reserved and zero, so initially setting the register to 0x0008
does not make much sense. Instead, bit 4 should be marked set,
as this is the power up default.

Further, mask computation in declarative part is obviously wrong:
Fix FRAC DIVISOR to provide an 11 bit mask correctly.

Signed-off-by: Oskar Schirmer <oskar@xxxxxxxxx>
Tested-by: Fabio Estevam <fabio.estevam@xxxxxxxxxxxxx>
---
 sound/soc/codecs/sgtl5000.c |    2 +-
 sound/soc/codecs/sgtl5000.h |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index d441559..10092ba 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -38,7 +38,7 @@
 static const struct reg_default sgtl5000_reg_defaults[] = {
 	{ SGTL5000_CHIP_CLK_CTRL,		0x0008 },
 	{ SGTL5000_CHIP_I2S_CTRL,		0x0010 },
-	{ SGTL5000_CHIP_SSS_CTRL,		0x0008 },
+	{ SGTL5000_CHIP_SSS_CTRL,		0x0010 },
 	{ SGTL5000_CHIP_DAC_VOL,		0x3c3c },
 	{ SGTL5000_CHIP_PAD_STRENGTH,		0x015f },
 	{ SGTL5000_CHIP_ANA_HP_CTRL,		0x1818 },
diff --git a/sound/soc/codecs/sgtl5000.h b/sound/soc/codecs/sgtl5000.h
index 4b69229..52bd843 100644
--- a/sound/soc/codecs/sgtl5000.h
+++ b/sound/soc/codecs/sgtl5000.h
@@ -347,7 +347,7 @@
 #define SGTL5000_PLL_INT_DIV_MASK		0xf800
 #define SGTL5000_PLL_INT_DIV_SHIFT		11
 #define SGTL5000_PLL_INT_DIV_WIDTH		5
-#define SGTL5000_PLL_FRAC_DIV_MASK		0x0700
+#define SGTL5000_PLL_FRAC_DIV_MASK		0x07ff
 #define SGTL5000_PLL_FRAC_DIV_SHIFT		0
 #define SGTL5000_PLL_FRAC_DIV_WIDTH		11
 
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/