Re: [PATCH] ACPIPHP: fix device destroying order issue in handlingdock notification

From: Alexander E. Patrakov
Date: Tue Jun 11 2013 - 12:52:15 EST

Next message: Andy Lutomirski: "Re: adopt(pid_t pid) syscall proposal [patch included]"
Previous message: Paul E. McKenney: "Re: [PATCH RFC ticketlock] Auto-queued ticketlock"
In reply to: Jiang Liu: "Re: [PATCH] ACPIPHP: fix device destroying order issue in handlingdock notification"
Next in thread: Jiang Liu: "Re: [PATCH] ACPIPHP: fix device destroying order issue in handlingdock notification"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

2013/6/11 Jiang Liu <liuj97@xxxxxxxxx>:
> Hi Alexander,
> This is much more harder issue to resolve. Let's first work around
> this
> issue and check whether other things are OK. The patch below is just a
> prove of concept, could you please help to try it?

In the initially-undocked case it passes the "dock and undock three
times, verify lspci output at each step" test.

In the initially-docked case, it exhibits the following problem: when
I press the undock button, only one PCI device disappears, and the
"docked" LED does not turn off. Additionally, there is a hung task.

Both dmesgs are attached.

--
Alexander E. Patrakov
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.0-rc4 (root@aep-vaio) (gcc version 4.6.3 (Gentoo 4.6.3 p1.11, pie-0.5.2) ) #7 SMP PREEMPT Tue Jun 11 22:34:46 YEKT 2013
[ 0.000000] Command line: root=/dev/vaio/gentoo64a-root rd.luks.uuid=luks-54ed2bf3-fb3d-4442-b8be-2f0cfda6a521 acpiphp.debug=1 initrd=/boot/initramfs.img BOOT_IMAGE=/boot/vmlinuz
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009ae3efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009ae3f000-0x000000009aebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Sony Corporation VPCZ23A4R/VAIO, BIOS R1013H5 05/21/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x25fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FE0000000 write-back
[ 0.000000] 2 base 09B000000 mask FFF000000 uncachable
[ 0.000000] 3 base 09C000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 5 base 100000000 mask F00000000 write-back
[ 0.000000] 6 base 200000000 mask FC0000000 write-back
[ 0.000000] 7 base 240000000 mask FF0000000 write-back
[ 0.000000] 8 base 250000000 mask FF0000000 write-back
[ 0.000000] 9 base 25FE00000 mask FFFE00000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[ 0.000000] Base memory trampoline at [ffff880000089000] 89000 size 24576
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x026ba000, 0x026bafff] PGTABLE
[ 0.000000] BRK [0x026bb000, 0x026bbfff] PGTABLE
[ 0.000000] BRK [0x026bc000, 0x026bcfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x25fc00000-0x25fdfffff]
[ 0.000000] [mem 0x25fc00000-0x25fdfffff] page 2M
[ 0.000000] BRK [0x026bd000, 0x026bdfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x25c000000-0x25fbfffff]
[ 0.000000] [mem 0x25c000000-0x25fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x25bffffff]
[ 0.000000] [mem 0x200000000-0x25bffffff] page 2M
[ 0.000000] BRK [0x026be000, 0x026befff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x9ae3efff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x9adfffff] page 2M
[ 0.000000] [mem 0x9ae00000-0x9ae3efff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9afff000-0x9affffff]
[ 0.000000] [mem 0x9afff000-0x9affffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x7fac4000-0x7fffefff]
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 Sony)
[ 0.000000] ACPI: XSDT 000000009affe120 00094 (v01 Sony VAIO 20120521 01000013)
[ 0.000000] ACPI: FACP 000000009affc000 000F4 (v04 Sony VAIO 20120521 ACPI 00040000)
[ 0.000000] ACPI: DSDT 000000009aff0000 08607 (v01 Sony VAIO 20120521 ACPI 00040000)
[ 0.000000] ACPI: FACS 000000009af6e000 00040
[ 0.000000] ACPI: ASF! 000000009affd000 000A5 (v32 Sony VAIO 20120521 ACPI 00040000)
[ 0.000000] ACPI: HPET 000000009affb000 00038 (v01 Sony VAIO 20120521 ACPI 00040000)
[ 0.000000] ACPI: APIC 000000009affa000 0008C (v02 Sony VAIO 20120521 ACPI 00040000)
[ 0.000000] ACPI: MCFG 000000009aff9000 0003C (v01 Sony VAIO 20120521 ACPI 00040000)
[ 0.000000] ACPI: SLIC 000000009afef000 00176 (v01 Sony VAIO 20120521 ACPI 00040000)
[ 0.000000] ACPI: WDAT 000000009afee000 00224 (v01 Sony VAIO 20120521 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009afed000 00CA6 (v01 Sony VAIO 20120521 ACPI 00040000)
[ 0.000000] ACPI: BOOT 000000009afeb000 00028 (v01 Sony VAIO 20120521 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009afe9000 0022B (v01 Sony VAIO 20120521 ACPI 00040000)
[ 0.000000] ACPI: ASPT 000000009afe6000 00034 (v07 Sony VAIO 20120521 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009afe5000 00846 (v01 Sony VAIO 20120521 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009afe4000 00996 (v01 Sony VAIO 20120521 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009afe3000 00EE8 (v01 Sony VAIO 20120521 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x25fdfffff]
[ 0.000000] NODE_DATA [mem 0x25fdf4000-0x25fdf8fff]
[ 0.000000] [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880257400000-ffff88025f3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x25fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0008efff]
[ 0.000000] node 0: [mem 0x00100000-0x9ae3efff]
[ 0.000000] node 0: [mem 0x9afff000-0x9affffff]
[ 0.000000] node 0: [mem 0x100000000-0x25fdfffff]
[ 0.000000] On node 0 totalpages: 2075598
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 142 pages reserved
[ 0.000000] DMA zone: 3982 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9849 pages used for memmap
[ 0.000000] DMA32 zone: 630336 pages, LIFO batch:31
[ 0.000000] Normal zone: 22520 pages used for memmap
[ 0.000000] Normal zone: 1441280 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000008f000 - 0000000000090000
[ 0.000000] PM: Registered nosave memory: 0000000000090000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000009ae3f000 - 000000009aebf000
[ 0.000000] PM: Registered nosave memory: 000000009aebf000 - 000000009afbf000
[ 0.000000] PM: Registered nosave memory: 000000009afbf000 - 000000009afff000
[ 0.000000] PM: Registered nosave memory: 000000009b000000 - 000000009fa00000
[ 0.000000] PM: Registered nosave memory: 000000009fa00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
[ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
[ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88025fa00000 s83904 r8192 d22592 u262144
[ 0.000000] pcpu-alloc: s83904 r8192 d22592 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2043023
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/vaio/gentoo64a-root rd.luks.uuid=luks-54ed2bf3-fb3d-4442-b8be-2f0cfda6a521 acpiphp.debug=1 initrd=/boot/initramfs.img BOOT_IMAGE=/boot/vmlinuz
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8074256k/9959424k available (6575k kernel code, 1657032k absent, 228136k reserved, 6466k data, 980k init)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] Additional per-CPU info printed with stalls.
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 5855 kB
[ 0.000000] per task-struct memory footprint: 1920 bytes
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] kmemleak: Kernel memory leak detector disabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.001000] tsc: Detected 2793.628 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.25 BogoMIPS (lpj=2793628)
[ 0.000123] pid_max: default: 32768 minimum: 301
[ 0.000239] Security Framework initialized
[ 0.000829] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002405] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003104] Mount-cache hash table entries: 256
[ 0.003765] Initializing cgroup subsys memory
[ 0.003846] Initializing cgroup subsys devices
[ 0.003929] Initializing cgroup subsys freezer
[ 0.004481] Initializing cgroup subsys blkio
[ 0.004540] Initializing cgroup subsys net_prio
[ 0.004599] Initializing cgroup subsys hugetlb
[ 0.004703] CPU: Physical Processor ID: 0
[ 0.004760] CPU: Processor Core ID: 0
[ 0.004819] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.004915] mce: CPU supports 7 MCE banks
[ 0.004981] CPU0: Thermal monitoring enabled (TM1)
[ 0.005052] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
[ 0.005315] Freeing SMP alternatives: 24k freed
[ 0.005380] ACPI: Core revision 20130328
[ 0.016565] ACPI: All ACPI Tables successfully acquired
[ 0.028840] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.038921] smpboot: CPU0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz (fam: 06, model: 2a, stepping: 07)
[ 0.039121] TSC deadline timer enabled
[ 0.039136] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.039372] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[ 0.039453] ... version: 3
[ 0.039510] ... bit width: 48
[ 0.039567] ... generic registers: 4
[ 0.039625] ... value mask: 0000ffffffffffff
[ 0.039684] ... max period: 000000007fffffff
[ 0.039744] ... fixed-purpose events: 3
[ 0.039801] ... event mask: 000000070000000f
[ 0.049497] SMP alternatives: lockdep: fixing up alternatives
[ 0.063045] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.049575] smpboot: Booting Node 0, Processors #1
[ 0.064981] SMP alternatives: lockdep: fixing up alternatives
[ 0.065093] #2
[ 0.080541] SMP alternatives: lockdep: fixing up alternatives
[ 0.080654] #3
[ 0.093978] Brought up 4 CPUs
[ 0.094088] smpboot: Total of 4 processors activated (22349.02 BogoMIPS)
[ 0.097699] devtmpfs: initialized
[ 0.100408] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
[ 0.100743] xor: automatically using best checksumming function:
[ 0.110068] avx : 20480.000 MB/sec
[ 0.110301] NET: Registered protocol family 16
[ 0.110717] ACPI: bus type PCI registered
[ 0.110776] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.110910] dca service started, version 1.12.1
[ 0.111027] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.111110] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.133669] PCI: Using configuration type 1 for base access
[ 0.135775] bio: create slab <bio-0> at 0
[ 0.152234] raid6: sse2x1 7578 MB/s
[ 0.169286] raid6: sse2x2 9316 MB/s
[ 0.186335] raid6: sse2x4 10820 MB/s
[ 0.186392] raid6: using algorithm sse2x4 (10820 MB/s)
[ 0.186452] raid6: using ssse3x2 recovery algorithm
[ 0.186586] ACPI: Added _OSI(Module Device)
[ 0.186645] ACPI: Added _OSI(Processor Device)
[ 0.186704] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.186763] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.191434] ACPI: EC: Look up EC in DSDT
[ 0.195980] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.204559] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.212427] ACPI: SSDT 000000009ae70718 0067C (v01 Sony VAIO 20120521 INTL 20100121)
[ 0.213757] ACPI: Dynamic OEM Table Load:
[ 0.213894] ACPI: SSDT (null) 0067C (v01 Sony VAIO 20120521 INTL 20100121)
[ 0.217801] ACPI: SSDT 000000009ae71a98 00303 (v01 Sony VAIO 20120521 INTL 20100121)
[ 0.219187] ACPI: Dynamic OEM Table Load:
[ 0.219323] ACPI: SSDT (null) 00303 (v01 Sony VAIO 20120521 INTL 20100121)
[ 0.223712] ACPI: SSDT 000000009ae6fd98 00119 (v01 Sony VAIO 20120521 INTL 20100121)
[ 0.225041] ACPI: Dynamic OEM Table Load:
[ 0.225178] ACPI: SSDT (null) 00119 (v01 Sony VAIO 20120521 INTL 20100121)
[ 0.636740] ACPI: Interpreter enabled
[ 0.636798] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568)
[ 0.636940] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
[ 0.637109] ACPI: (supports S0 S3 S4 S5)
[ 0.637162] ACPI: Using IOAPIC for interrupt routing
[ 0.637249] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.638184] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.655479] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.655646] \_SB_.PCI0:_OSC invalid UUID
[ 0.655647] _OSC request data:1 8 0
[ 0.656695] PCI host bridge to bus 0000:00
[ 0.656749] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.656806] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.656863] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.656919] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.656977] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
[ 0.657068] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.657277] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
[ 0.657293] pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd03fffff 64bit]
[ 0.657301] pci 0000:00:02.0: reg 18: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.657307] pci 0000:00:02.0: reg 20: [io 0xa000-0xa03f]
[ 0.657494] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.657532] pci 0000:00:16.0: reg 10: [mem 0xd9404000-0xd940400f 64bit]
[ 0.657658] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.657840] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.658126] pci 0000:00:1a.0: reg 10: [mem 0xd9409000-0xd94093ff]
[ 0.659782] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.659876] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.660041] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.660067] pci 0000:00:1b.0: reg 10: [mem 0xd9400000-0xd9403fff 64bit]
[ 0.660189] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.660239] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.660351] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.660486] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.660543] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.660661] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.660797] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.660858] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.660969] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
[ 0.661104] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.661166] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.661278] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.661413] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.661478] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.661593] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
[ 0.661733] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.661810] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 0.661931] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.662216] pci 0000:00:1d.0: reg 10: [mem 0xd9408000-0xd94083ff]
[ 0.663865] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.663930] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.664045] pci 0000:00:1f.0: [8086:1c4b] type 00 class 0x060100
[ 0.664283] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
[ 0.664316] pci 0000:00:1f.2: reg 10: [io 0xa088-0xa08f]
[ 0.664329] pci 0000:00:1f.2: reg 14: [io 0xa094-0xa097]
[ 0.664343] pci 0000:00:1f.2: reg 18: [io 0xa080-0xa087]
[ 0.664356] pci 0000:00:1f.2: reg 1c: [io 0xa090-0xa093]
[ 0.664369] pci 0000:00:1f.2: reg 20: [io 0xa060-0xa07f]
[ 0.664382] pci 0000:00:1f.2: reg 24: [mem 0xd9407000-0xd94077ff]
[ 0.664467] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.664578] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.664603] pci 0000:00:1f.3: reg 10: [mem 0xd9405000-0xd94050ff 64bit]
[ 0.664640] pci 0000:00:1f.3: reg 20: [io 0xa040-0xa05f]
[ 0.665047] pci 0000:02:00.0: [8086:0091] type 00 class 0x028000
[ 0.665198] pci 0000:02:00.0: reg 10: [mem 0xd8400000-0xd8401fff 64bit]
[ 0.665941] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.666107] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.667844] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.667902] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff]
[ 0.667907] pci 0000:00:1c.0: bridge window [mem 0xd8400000-0xd93fffff]
[ 0.667916] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
[ 0.668067] pci 0000:03:00.0: [10ec:5209] type 00 class 0xff0000
[ 0.668095] pci 0000:03:00.0: reg 10: [mem 0xd7400000-0xd7400fff]
[ 0.668304] pci 0000:03:00.0: supports D1 D2
[ 0.668306] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
[ 0.668357] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.669755] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.669841] pci 0000:00:1c.1: bridge window [io 0x8000-0x8fff]
[ 0.669846] pci 0000:00:1c.1: bridge window [mem 0xd7400000-0xd83fffff]
[ 0.669855] pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
[ 0.670054] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.670092] pci 0000:04:00.0: reg 10: [mem 0xd6400000-0xd6401fff 64bit]
[ 0.670294] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.670349] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.670484] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.670541] pci 0000:00:1c.2: bridge window [io 0x7000-0x7fff]
[ 0.670546] pci 0000:00:1c.2: bridge window [mem 0xd6400000-0xd73fffff]
[ 0.670555] pci 0000:00:1c.2: bridge window [mem 0xd2400000-0xd33fffff 64bit pref]
[ 0.670752] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 0.670822] pci 0000:05:00.0: reg 10: [io 0x6000-0x60ff]
[ 0.670946] pci 0000:05:00.0: reg 18: [mem 0xd3404000-0xd3404fff 64bit pref]
[ 0.671023] pci 0000:05:00.0: reg 20: [mem 0xd3400000-0xd3403fff 64bit pref]
[ 0.671360] pci 0000:05:00.0: supports D1 D2
[ 0.671362] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.671490] pci 0000:05:00.0: System wakeup disabled by ACPI
[ 0.672798] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.672874] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
[ 0.672879] pci 0000:00:1c.3: bridge window [mem 0xd5400000-0xd63fffff]
[ 0.672888] pci 0000:00:1c.3: bridge window [mem 0xd3400000-0xd43fffff 64bit pref]
[ 0.673033] acpiphp_glue: found ACPI PCI Hotplug slot 1 at PCI 0000:08:00
[ 0.673152] acpiphp: Slot [1] registered
[ 0.673258] pci 0000:08:00.0: [8086:151b] type 01 class 0x060400
[ 0.673424] pci 0000:08:00.0: supports D1 D2
[ 0.673426] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.674790] pci 0000:00:1c.6: PCI bridge to [bus 08-20]
[ 0.674882] pci 0000:00:1c.6: bridge window [io 0x3000-0x5fff]
[ 0.674887] pci 0000:00:1c.6: bridge window [mem 0xb0000000-0xcfffffff]
[ 0.674896] pci 0000:00:1c.6: bridge window [mem 0xd4400000-0xd53fffff 64bit pref]
[ 0.675036] acpiphp_glue: found ACPI PCI Hotplug slot 1 at PCI 0000:0a:00
[ 0.675052] acpiphp: Slot [1-1] registered
[ 0.675124] acpiphp_glue: found ACPI PCI Hotplug slot 2 at PCI 0000:0a:03
[ 0.675137] acpiphp: Slot [2] registered
[ 0.675209] acpiphp_glue: found ACPI PCI Hotplug slot 3 at PCI 0000:0a:04
[ 0.675221] acpiphp: Slot [3] registered
[ 0.675311] pci 0000:0a:00.0: [8086:151b] type 01 class 0x060400
[ 0.675480] pci 0000:0a:00.0: supports D1 D2
[ 0.675482] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.675610] pci 0000:0a:03.0: [8086:151b] type 01 class 0x060400
[ 0.675783] pci 0000:0a:03.0: supports D1 D2
[ 0.675784] pci 0000:0a:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.675907] pci 0000:0a:04.0: [8086:151b] type 01 class 0x060400
[ 0.676076] pci 0000:0a:04.0: supports D1 D2
[ 0.676078] pci 0000:0a:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.676248] pci 0000:08:00.0: PCI bridge to [bus 0a-1d]
[ 0.676313] pci 0000:08:00.0: bridge window [io 0x3000-0x5fff]
[ 0.676319] pci 0000:08:00.0: bridge window [mem 0xb0000000-0xc03fffff]
[ 0.676331] pci 0000:08:00.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref]
[ 0.676451] pci 0000:0a:00.0: PCI bridge to [bus 0b]
[ 0.676520] pci 0000:0a:00.0: bridge window [mem 0xc0300000-0xc03fffff]
[ 0.676649] pci 0000:0a:03.0: PCI bridge to [bus 0c]
[ 0.676899] pci 0000:14:00.0: [8086:151b] type 01 class 0x060400
[ 0.677150] pci 0000:14:00.0: supports D1 D2
[ 0.677151] pci 0000:14:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.677307] pci 0000:0a:04.0: PCI bridge to [bus 14-1d]
[ 0.677372] pci 0000:0a:04.0: bridge window [io 0x3000-0x5fff]
[ 0.677379] pci 0000:0a:04.0: bridge window [mem 0xb0000000-0xc02fffff]
[ 0.677390] pci 0000:0a:04.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref]
[ 0.677618] pci 0000:15:03.0: [8086:151b] type 01 class 0x060400
[ 0.677877] pci 0000:15:03.0: supports D1 D2
[ 0.677878] pci 0000:15:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.678035] pci 0000:15:04.0: [8086:151b] type 01 class 0x060400
[ 0.678289] pci 0000:15:04.0: supports D1 D2
[ 0.678291] pci 0000:15:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.678509] pci 0000:14:00.0: PCI bridge to [bus 15-1d]
[ 0.678578] pci 0000:14:00.0: bridge window [io 0x3000-0x5fff]
[ 0.678587] pci 0000:14:00.0: bridge window [mem 0xb0000000-0xc02fffff]
[ 0.678604] pci 0000:14:00.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref]
[ 0.678794] acpiphp_glue: found ACPI PCI Hotplug slot 1 at PCI 0000:16:00
[ 0.678810] acpiphp: Slot [1-2] registered
[ 0.678886] acpiphp_glue: sibling found, but _SUN doesn't match!
[ 0.679001] pci 0000:16:00.0: [1002:6740] type 00 class 0x030000
[ 0.679068] pci 0000:16:00.0: reg 10: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.679121] pci 0000:16:00.0: reg 18: [mem 0xc0200000-0xc021ffff 64bit]
[ 0.679155] pci 0000:16:00.0: reg 20: [io 0x5000-0x50ff]
[ 0.679222] pci 0000:16:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.679393] pci 0000:16:00.0: supports D1 D2
[ 0.679542] pci 0000:16:00.1: [1002:aa90] type 00 class 0x040300
[ 0.679608] pci 0000:16:00.1: reg 10: [mem 0xc0220000-0xc0223fff 64bit]
[ 0.679944] pci 0000:16:00.1: supports D1 D2
[ 0.680150] pci 0000:15:03.0: PCI bridge to [bus 16]
[ 0.680220] pci 0000:15:03.0: bridge window [io 0x5000-0x5fff]
[ 0.680229] pci 0000:15:03.0: bridge window [mem 0xc0200000-0xc02fffff]
[ 0.680246] pci 0000:15:03.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.680479] pci 0000:17:00.0: [8086:151b] type 01 class 0x060400
[ 0.680817] pci 0000:17:00.0: supports D1 D2
[ 0.680818] pci 0000:17:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.681012] pci 0000:15:04.0: PCI bridge to [bus 17-1d]
[ 0.681081] pci 0000:15:04.0: bridge window [io 0x3000-0x4fff]
[ 0.681090] pci 0000:15:04.0: bridge window [mem 0xc0000000-0xc01fffff]
[ 0.681106] pci 0000:15:04.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref]
[ 0.681396] pci 0000:18:00.0: [8086:151b] type 01 class 0x060400
[ 0.681735] pci 0000:18:00.0: supports D1 D2
[ 0.681736] pci 0000:18:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.681934] pci 0000:18:01.0: [8086:151b] type 01 class 0x060400
[ 0.682274] pci 0000:18:01.0: supports D1 D2
[ 0.682275] pci 0000:18:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.682473] pci 0000:18:02.0: [8086:151b] type 01 class 0x060400
[ 0.682815] pci 0000:18:02.0: supports D1 D2
[ 0.682817] pci 0000:18:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.683024] pci 0000:18:03.0: [8086:151b] type 01 class 0x060400
[ 0.683362] pci 0000:18:03.0: supports D1 D2
[ 0.683363] pci 0000:18:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.683578] pci 0000:18:04.0: [8086:151b] type 01 class 0x060400
[ 0.683920] pci 0000:18:04.0: supports D1 D2
[ 0.683922] pci 0000:18:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.684221] pci 0000:17:00.0: PCI bridge to [bus 18-1d]
[ 0.684296] pci 0000:17:00.0: bridge window [io 0x3000-0x4fff]
[ 0.684308] pci 0000:17:00.0: bridge window [mem 0xc0000000-0xc01fffff]
[ 0.684330] pci 0000:17:00.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref]
[ 0.684560] acpiphp_glue: found ACPI PCI Hotplug slot 1 at PCI 0000:19:00
[ 0.684574] acpiphp: Slot [1-3] registered
[ 0.684712] pci 0000:19:00.0: [10ec:8168] type 00 class 0x020000
[ 0.684773] pci 0000:19:00.0: reg 10: [io 0x4000-0x40ff]
[ 0.684886] pci 0000:19:00.0: reg 18: [mem 0xd4404000-0xd4404fff 64bit pref]
[ 0.684953] pci 0000:19:00.0: reg 20: [mem 0xd4400000-0xd4403fff 64bit pref]
[ 0.685256] pci 0000:19:00.0: supports D1 D2
[ 0.685258] pci 0000:19:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.685502] pci 0000:18:00.0: PCI bridge to [bus 19]
[ 0.685575] pci 0000:18:00.0: bridge window [io 0x4000-0x4fff]
[ 0.685607] pci 0000:18:00.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref]
[ 0.685846] acpiphp_glue: found ACPI PCI Hotplug slot 1 at PCI 0000:1a:00
[ 0.685862] acpiphp: Slot [1-4] registered
[ 0.685999] pci 0000:1a:00.0: [11ab:6121] type 00 class 0x01018f
[ 0.686061] pci 0000:1a:00.0: reg 10: [io 0x3018-0x301f]
[ 0.686104] pci 0000:1a:00.0: reg 14: [io 0x3024-0x3027]
[ 0.686147] pci 0000:1a:00.0: reg 18: [io 0x3010-0x3017]
[ 0.686191] pci 0000:1a:00.0: reg 1c: [io 0x3020-0x3023]
[ 0.686234] pci 0000:1a:00.0: reg 20: [io 0x3000-0x300f]
[ 0.686278] pci 0000:1a:00.0: reg 24: [mem 0xc0100000-0xc01003ff]
[ 0.686544] pci 0000:1a:00.0: supports D1
[ 0.686546] pci 0000:1a:00.0: PME# supported from D0 D1 D3hot
[ 0.686673] pci 0000:1a:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.686754] pci 0000:18:01.0: PCI bridge to [bus 1a]
[ 0.686832] pci 0000:18:01.0: bridge window [io 0x3000-0x3fff]
[ 0.686844] pci 0000:18:01.0: bridge window [mem 0xc0100000-0xc01fffff]
[ 0.687101] acpiphp_glue: found ACPI PCI Hotplug slot 1 at PCI 0000:1b:00
[ 0.687116] acpiphp: Slot [1-5] registered
[ 0.687258] pci 0000:1b:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.687337] pci 0000:1b:00.0: reg 10: [mem 0xc0000000-0xc0001fff 64bit]
[ 0.687756] pci 0000:1b:00.0: PME# supported from D0 D3hot D3cold
[ 0.687984] pci 0000:18:02.0: PCI bridge to [bus 1b]
[ 0.688069] pci 0000:18:02.0: bridge window [mem 0xc0000000-0xc00fffff]
[ 0.688308] pci 0000:18:03.0: PCI bridge to [bus 1c]
[ 0.688628] pci 0000:18:04.0: PCI bridge to [bus 1d]
[ 0.689069] \_SB_.PCI0:_OSC invalid UUID
[ 0.689071] _OSC request data:1 1f 0
[ 0.689076] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.689146] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.690905] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.691505] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.692062] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.692611] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.693166] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.693760] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.694394] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.694950] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.696270] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.696397] acpi root: \_SB_.PCI0 notify handler is installed
[ 0.696546] Found 1 acpi root devices
[ 0.696672] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.697067] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.697156] vgaarb: device added: PCI:0000:16:00.0,decodes=io+mem,owns=none,locks=none
[ 0.697229] vgaarb: loaded
[ 0.697279] vgaarb: bridge control possible 0000:16:00.0
[ 0.697333] vgaarb: no bridge control possible 0000:00:02.0
[ 0.697467] SCSI subsystem initialized
[ 0.697519] ACPI: bus type ATA registered
[ 0.697655] libata version 3.00 loaded.
[ 0.697669] ACPI: bus type USB registered
[ 0.697746] usbcore: registered new interface driver usbfs
[ 0.697813] usbcore: registered new interface driver hub
[ 0.697902] usbcore: registered new device driver usb
[ 0.698001] PCI: Using ACPI for IRQ routing
[ 0.705438] PCI: pci_cache_line_size set to 64 bytes
[ 0.705778] e820: reserve RAM buffer [mem 0x0008f400-0x0008ffff]
[ 0.705784] e820: reserve RAM buffer [mem 0x9ae3f000-0x9bffffff]
[ 0.705786] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
[ 0.705788] e820: reserve RAM buffer [mem 0x25fe00000-0x25fffffff]
[ 0.706142] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.706500] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.708586] Switching to clocksource hpet
[ 0.715244] pnp: PnP ACPI init
[ 0.715324] ACPI: bus type PNP registered
[ 0.715488] pnp 00:00: [dma 4]
[ 0.715543] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.715581] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.715703] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.715755] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.715847] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.715904] system 00:04: [io 0x1000-0x100f] has been reserved
[ 0.715961] system 00:04: [io 0xffff] has been reserved
[ 0.716016] system 00:04: [io 0xffff] has been reserved
[ 0.716071] system 00:04: [io 0x0400-0x0453] has been reserved
[ 0.716127] system 00:04: [io 0x0458-0x047f] has been reserved
[ 0.716183] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.716729] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.716785] system 00:04: [io 0x2000] has been reserved
[ 0.716840] system 00:04: [io 0x2004] has been reserved
[ 0.716899] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.716946] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.717019] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.717078] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.717130] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.717190] pnp 00:08: Plug and Play ACPI device, IDs SNY9015 PNP0f13 (active)
[ 0.717389] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.717447] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.717505] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.717562] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.717620] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.717685] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.717743] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.717801] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.717859] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.717918] system 00:09: [mem 0x9fa00000-0x9fa00fff] has been reserved
[ 0.717977] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.718764] system 00:0a: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.718828] system 00:0a: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.718893] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.718914] pnp: PnP ACPI: found 11 devices
[ 0.718967] ACPI: bus type PNP unregistered
[ 0.726949] pci 0000:16:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.727099] pci 0000:0a:00.0: bridge window [io 0x1000-0x0fff] to [bus 0b] add_size 1000
[ 0.727103] pci 0000:0a:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000
[ 0.727119] pci 0000:0a:03.0: bridge window [io 0x1000-0x0fff] to [bus 0c] add_size 1000
[ 0.727122] pci 0000:0a:03.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0c] add_size 200000
[ 0.727124] pci 0000:0a:03.0: bridge window [mem 0x00100000-0x000fffff] to [bus 0c] add_size 200000
[ 0.727179] pci 0000:18:00.0: bridge window [mem 0x00100000-0x000fffff] to [bus 19] add_size 400000
[ 0.727211] pci 0000:18:01.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 1a] add_size 200000
[ 0.727244] pci 0000:18:02.0: bridge window [io 0x1000-0x0fff] to [bus 1b] add_size 1000
[ 0.727246] pci 0000:18:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 1b] add_size 200000
[ 0.727278] pci 0000:18:03.0: bridge window [io 0x1000-0x0fff] to [bus 1c] add_size 1000
[ 0.727280] pci 0000:18:03.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 1c] add_size 200000
[ 0.727282] pci 0000:18:03.0: bridge window [mem 0x00100000-0x000fffff] to [bus 1c] add_size 200000
[ 0.727315] pci 0000:18:04.0: bridge window [io 0x1000-0x0fff] to [bus 1d] add_size 1000
[ 0.727317] pci 0000:18:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 1d] add_size 200000
[ 0.727319] pci 0000:18:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus 1d] add_size 200000
[ 0.727437] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.727493] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff]
[ 0.727554] pci 0000:00:1c.0: bridge window [mem 0xd8400000-0xd93fffff]
[ 0.727615] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
[ 0.727699] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.727754] pci 0000:00:1c.1: bridge window [io 0x8000-0x8fff]
[ 0.727816] pci 0000:00:1c.1: bridge window [mem 0xd7400000-0xd83fffff]
[ 0.727876] pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
[ 0.727952] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.728008] pci 0000:00:1c.2: bridge window [io 0x7000-0x7fff]
[ 0.728069] pci 0000:00:1c.2: bridge window [mem 0xd6400000-0xd73fffff]
[ 0.728129] pci 0000:00:1c.2: bridge window [mem 0xd2400000-0xd33fffff 64bit pref]
[ 0.728206] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.728261] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
[ 0.728322] pci 0000:00:1c.3: bridge window [mem 0xd5400000-0xd63fffff]
[ 0.728383] pci 0000:00:1c.3: bridge window [mem 0xd3400000-0xd43fffff 64bit pref]
[ 0.728462] pci 0000:0a:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.728464] pci 0000:0a:03.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.728465] pci 0000:0a:03.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.728467] pci 0000:0a:00.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.728469] pci 0000:0a:03.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.728473] pci 0000:0a:00.0: BAR 15: can't assign mem pref (size 0x200000)
[ 0.728539] pci 0000:0a:03.0: BAR 14: can't assign mem (size 0x200000)
[ 0.728597] pci 0000:0a:03.0: BAR 15: can't assign mem pref (size 0x200000)
[ 0.728656] pci 0000:0a:00.0: BAR 13: can't assign io (size 0x1000)
[ 0.728719] pci 0000:0a:03.0: BAR 13: can't assign io (size 0x1000)
[ 0.728777] pci 0000:0a:03.0: BAR 14: can't assign mem (size 0x200000)
[ 0.728835] pci 0000:0a:03.0: BAR 15: can't assign mem pref (size 0x200000)
[ 0.728893] pci 0000:0a:03.0: BAR 13: can't assign io (size 0x1000)
[ 0.728950] pci 0000:0a:00.0: BAR 15: can't assign mem pref (size 0x200000)
[ 0.729008] pci 0000:0a:00.0: BAR 13: can't assign io (size 0x1000)
[ 0.729065] pci 0000:0a:00.0: PCI bridge to [bus 0b]
[ 0.729127] pci 0000:0a:00.0: bridge window [mem 0xc0300000-0xc03fffff]
[ 0.729199] pci 0000:0a:03.0: PCI bridge to [bus 0c]
[ 0.729277] pci 0000:16:00.0: BAR 6: assigned [mem 0xc0240000-0xc025ffff pref]
[ 0.729347] pci 0000:15:03.0: PCI bridge to [bus 16]
[ 0.729404] pci 0000:15:03.0: bridge window [io 0x5000-0x5fff]
[ 0.729471] pci 0000:15:03.0: bridge window [mem 0xc0200000-0xc02fffff]
[ 0.729536] pci 0000:15:03.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.729623] pci 0000:18:00.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
[ 0.729625] pci 0000:18:01.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.729627] pci 0000:18:02.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.729629] pci 0000:18:03.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.729631] pci 0000:18:03.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.729632] pci 0000:18:04.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.729634] pci 0000:18:04.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.729636] pci 0000:18:02.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.729638] pci 0000:18:03.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.729640] pci 0000:18:04.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.729642] pci 0000:18:00.0: BAR 14: can't assign mem (size 0x400000)
[ 0.729706] pci 0000:18:01.0: BAR 15: can't assign mem pref (size 0x200000)
[ 0.729764] pci 0000:18:02.0: BAR 15: can't assign mem pref (size 0x200000)
[ 0.729822] pci 0000:18:03.0: BAR 14: can't assign mem (size 0x200000)
[ 0.729880] pci 0000:18:03.0: BAR 15: can't assign mem pref (size 0x200000)
[ 0.729938] pci 0000:18:04.0: BAR 14: can't assign mem (size 0x200000)
[ 0.729995] pci 0000:18:04.0: BAR 15: can't assign mem pref (size 0x200000)
[ 0.730053] pci 0000:18:02.0: BAR 13: can't assign io (size 0x1000)
[ 0.730110] pci 0000:18:03.0: BAR 13: can't assign io (size 0x1000)
[ 0.730166] pci 0000:18:04.0: BAR 13: can't assign io (size 0x1000)
[ 0.730225] pci 0000:18:04.0: BAR 14: can't assign mem (size 0x200000)
[ 0.730283] pci 0000:18:04.0: BAR 15: can't assign mem pref (size 0x200000)
[ 0.730341] pci 0000:18:04.0: BAR 13: can't assign io (size 0x1000)
[ 0.730398] pci 0000:18:03.0: BAR 14: can't assign mem (size 0x200000)
[ 0.730456] pci 0000:18:03.0: BAR 15: can't assign mem pref (size 0x200000)
[ 0.730514] pci 0000:18:03.0: BAR 13: can't assign io (size 0x1000)
[ 0.730571] pci 0000:18:02.0: BAR 15: can't assign mem pref (size 0x200000)
[ 0.730629] pci 0000:18:02.0: BAR 13: can't assign io (size 0x1000)
[ 0.730686] pci 0000:18:01.0: BAR 15: can't assign mem pref (size 0x200000)
[ 0.730750] pci 0000:18:00.0: BAR 14: can't assign mem (size 0x400000)
[ 0.730808] pci 0000:18:00.0: PCI bridge to [bus 19]
[ 0.730867] pci 0000:18:00.0: bridge window [io 0x4000-0x4fff]
[ 0.730948] pci 0000:18:00.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref]
[ 0.731038] pci 0000:18:01.0: PCI bridge to [bus 1a]
[ 0.731097] pci 0000:18:01.0: bridge window [io 0x3000-0x3fff]
[ 0.731168] pci 0000:18:01.0: bridge window [mem 0xc0100000-0xc01fffff]
[ 0.731255] pci 0000:18:02.0: PCI bridge to [bus 1b]
[ 0.731324] pci 0000:18:02.0: bridge window [mem 0xc0000000-0xc00fffff]
[ 0.731411] pci 0000:18:03.0: PCI bridge to [bus 1c]
[ 0.731510] pci 0000:18:04.0: PCI bridge to [bus 1d]
[ 0.731609] pci 0000:17:00.0: PCI bridge to [bus 18-1d]
[ 0.731668] pci 0000:17:00.0: bridge window [io 0x3000-0x4fff]
[ 0.731745] pci 0000:17:00.0: bridge window [mem 0xc0000000-0xc01fffff]
[ 0.731812] pci 0000:17:00.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref]
[ 0.731902] pci 0000:15:04.0: PCI bridge to [bus 17-1d]
[ 0.731960] pci 0000:15:04.0: bridge window [io 0x3000-0x4fff]
[ 0.732027] pci 0000:15:04.0: bridge window [mem 0xc0000000-0xc01fffff]
[ 0.732092] pci 0000:15:04.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref]
[ 0.732176] pci 0000:14:00.0: PCI bridge to [bus 15-1d]
[ 0.732234] pci 0000:14:00.0: bridge window [io 0x3000-0x5fff]
[ 0.732301] pci 0000:14:00.0: bridge window [mem 0xb0000000-0xc02fffff]
[ 0.732366] pci 0000:14:00.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref]
[ 0.732450] pci 0000:0a:04.0: PCI bridge to [bus 14-1d]
[ 0.732507] pci 0000:0a:04.0: bridge window [io 0x3000-0x5fff]
[ 0.732570] pci 0000:0a:04.0: bridge window [mem 0xb0000000-0xc02fffff]
[ 0.732632] pci 0000:0a:04.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref]
[ 0.732718] pci 0000:08:00.0: PCI bridge to [bus 0a-1d]
[ 0.732774] pci 0000:08:00.0: bridge window [io 0x3000-0x5fff]
[ 0.732837] pci 0000:08:00.0: bridge window [mem 0xb0000000-0xc03fffff]
[ 0.732899] pci 0000:08:00.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref]
[ 0.732979] pci 0000:00:1c.6: PCI bridge to [bus 08-20]
[ 0.733035] pci 0000:00:1c.6: bridge window [io 0x3000-0x5fff]
[ 0.733095] pci 0000:00:1c.6: bridge window [mem 0xb0000000-0xcfffffff]
[ 0.733156] pci 0000:00:1c.6: bridge window [mem 0xd4400000-0xd53fffff 64bit pref]
[ 0.734238] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.734240] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.734242] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.734244] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
[ 0.734246] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff]
[ 0.734247] pci_bus 0000:02: resource 1 [mem 0xd8400000-0xd93fffff]
[ 0.734249] pci_bus 0000:02: resource 2 [mem 0xd0400000-0xd13fffff 64bit pref]
[ 0.734251] pci_bus 0000:03: resource 0 [io 0x8000-0x8fff]
[ 0.734253] pci_bus 0000:03: resource 1 [mem 0xd7400000-0xd83fffff]
[ 0.734254] pci_bus 0000:03: resource 2 [mem 0xd1400000-0xd23fffff 64bit pref]
[ 0.734256] pci_bus 0000:04: resource 0 [io 0x7000-0x7fff]
[ 0.734258] pci_bus 0000:04: resource 1 [mem 0xd6400000-0xd73fffff]
[ 0.734259] pci_bus 0000:04: resource 2 [mem 0xd2400000-0xd33fffff 64bit pref]
[ 0.734261] pci_bus 0000:05: resource 0 [io 0x6000-0x6fff]
[ 0.734263] pci_bus 0000:05: resource 1 [mem 0xd5400000-0xd63fffff]
[ 0.734264] pci_bus 0000:05: resource 2 [mem 0xd3400000-0xd43fffff 64bit pref]
[ 0.734266] pci_bus 0000:08: resource 0 [io 0x3000-0x5fff]
[ 0.734268] pci_bus 0000:08: resource 1 [mem 0xb0000000-0xcfffffff]
[ 0.734270] pci_bus 0000:08: resource 2 [mem 0xd4400000-0xd53fffff 64bit pref]
[ 0.734271] pci_bus 0000:0a: resource 0 [io 0x3000-0x5fff]
[ 0.734273] pci_bus 0000:0a: resource 1 [mem 0xb0000000-0xc03fffff]
[ 0.734275] pci_bus 0000:0a: resource 2 [mem 0xd4400000-0xd44fffff 64bit pref]
[ 0.734276] pci_bus 0000:0b: resource 1 [mem 0xc0300000-0xc03fffff]
[ 0.734278] pci_bus 0000:14: resource 0 [io 0x3000-0x5fff]
[ 0.734280] pci_bus 0000:14: resource 1 [mem 0xb0000000-0xc02fffff]
[ 0.734282] pci_bus 0000:14: resource 2 [mem 0xd4400000-0xd44fffff 64bit pref]
[ 0.734283] pci_bus 0000:15: resource 0 [io 0x3000-0x5fff]
[ 0.734285] pci_bus 0000:15: resource 1 [mem 0xb0000000-0xc02fffff]
[ 0.734287] pci_bus 0000:15: resource 2 [mem 0xd4400000-0xd44fffff 64bit pref]
[ 0.734288] pci_bus 0000:16: resource 0 [io 0x5000-0x5fff]
[ 0.734290] pci_bus 0000:16: resource 1 [mem 0xc0200000-0xc02fffff]
[ 0.734292] pci_bus 0000:16: resource 2 [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.734294] pci_bus 0000:17: resource 0 [io 0x3000-0x4fff]
[ 0.734295] pci_bus 0000:17: resource 1 [mem 0xc0000000-0xc01fffff]
[ 0.734297] pci_bus 0000:17: resource 2 [mem 0xd4400000-0xd44fffff 64bit pref]
[ 0.734299] pci_bus 0000:18: resource 0 [io 0x3000-0x4fff]
[ 0.734300] pci_bus 0000:18: resource 1 [mem 0xc0000000-0xc01fffff]
[ 0.734302] pci_bus 0000:18: resource 2 [mem 0xd4400000-0xd44fffff 64bit pref]
[ 0.734304] pci_bus 0000:19: resource 0 [io 0x4000-0x4fff]
[ 0.734305] pci_bus 0000:19: resource 2 [mem 0xd4400000-0xd44fffff 64bit pref]
[ 0.734307] pci_bus 0000:1a: resource 0 [io 0x3000-0x3fff]
[ 0.734309] pci_bus 0000:1a: resource 1 [mem 0xc0100000-0xc01fffff]
[ 0.734311] pci_bus 0000:1b: resource 1 [mem 0xc0000000-0xc00fffff]
[ 0.734352] NET: Registered protocol family 2
[ 0.734864] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.735334] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)
[ 0.738839] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.738950] TCP: reno registered
[ 0.739049] UDP hash table entries: 4096 (order: 7, 655360 bytes)
[ 0.739588] UDP-Lite hash table entries: 4096 (order: 7, 655360 bytes)
[ 0.740298] NET: Registered protocol family 1
[ 0.740367] pci 0000:00:02.0: Boot video device
[ 0.812315] PCI: CLS 64 bytes, default 64
[ 0.812471] Unpacking initramfs...
[ 0.897053] Freeing initrd memory: 5356k freed
[ 0.897801] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.897863] software IO TLB [mem 0x96e3f000-0x9ae3f000] (64MB) mapped at [ffff880096e3f000-ffff88009ae3efff]
[ 0.897993] Simple Boot Flag at 0x44 set to 0x1
[ 0.898658] audit: initializing netlink socket (disabled)
[ 0.898744] type=2000 audit(1370968978.875:1): initialized
[ 0.919344] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.921962] VFS: Disk quotas dquot_6.5.2
[ 0.922069] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.922708] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.923084] NILFS version 2 loaded
[ 0.923341] bio: create slab <bio-1> at 1
[ 0.923652] Btrfs loaded
[ 0.923709] msgmni has been set to 15780
[ 0.924402] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.924485] io scheduler noop registered
[ 0.924537] io scheduler deadline registered
[ 0.924655] io scheduler cfq registered (default)
[ 0.925289] pcieport 0000:08:00.0: irq 40 for MSI/MSI-X
[ 0.925493] pcieport 0000:0a:00.0: irq 41 for MSI/MSI-X
[ 0.925646] pcieport 0000:0a:03.0: irq 42 for MSI/MSI-X
[ 0.925797] pcieport 0000:0a:04.0: irq 43 for MSI/MSI-X
[ 0.925978] pcieport 0000:14:00.0: irq 44 for MSI/MSI-X
[ 0.926190] pcieport 0000:15:03.0: irq 45 for MSI/MSI-X
[ 0.926404] pcieport 0000:15:04.0: irq 46 for MSI/MSI-X
[ 0.926633] pcieport 0000:17:00.0: irq 47 for MSI/MSI-X
[ 0.926903] pcieport 0000:18:00.0: irq 48 for MSI/MSI-X
[ 0.927194] pcieport 0000:18:01.0: irq 49 for MSI/MSI-X
[ 0.927468] pcieport 0000:18:02.0: irq 50 for MSI/MSI-X
[ 0.927741] pcieport 0000:18:03.0: irq 51 for MSI/MSI-X
[ 0.928029] pcieport 0000:18:04.0: irq 52 for MSI/MSI-X
[ 0.928269] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.928413] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.928469] cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version: 0.2
[ 0.928552] cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1
[ 0.928621] cpcihp_generic: not configured, disabling.
[ 0.928707] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.931387] acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
[ 0.931876] intel_idle: MWAIT substates: 0x21120
[ 0.931878] intel_idle: v0.4 model 0x2A
[ 0.931879] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.932040] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.932255] ACPI: AC Adapter [ADP1] (on-line)
[ 0.932549] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.932654] ACPI: Lid Switch [LID0]
[ 0.932757] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.932856] ACPI: Power Button [PWRB]
[ 0.933030] ACPI: Requesting acpi_cpufreq
[ 0.940582] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.940639] ACPI: Thermal Zone [TZ01] (55 C)
[ 0.940814] ioatdma: Intel(R) QuickData Technology Driver 4.00
[ 0.941022] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.945823] loop: module loaded
[ 0.946322] mei_me 0000:00:16.0: setting latency timer to 64
[ 0.946405] mei_me 0000:00:16.0: irq 53 for MSI/MSI-X
[ 0.947035] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.947122] ACPI: Battery Slot [BAT1] (battery present)
[ 0.947290] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.947376] ACPI: Battery Slot [BAT2] (battery absent)
[ 0.951452] Loading iSCSI transport class v2.0-870.
[ 0.951663] iscsi: registered transport (tcp)
[ 0.951782] ahci 0000:00:1f.2: version 3.0
[ 0.951927] ahci 0000:00:1f.2: irq 54 for MSI/MSI-X
[ 0.952009] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl RAID mode
[ 0.952082] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part apst
[ 0.952155] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.953151] scsi0 : ahci
[ 0.953428] scsi1 : ahci
[ 0.953575] scsi2 : ahci
[ 0.953738] scsi3 : ahci
[ 0.953892] scsi4 : ahci
[ 0.954061] scsi5 : ahci
[ 0.954195] ata1: SATA max UDMA/133 abar m2048@0xd9407000 port 0xd9407100 irq 54
[ 0.954265] ata2: SATA max UDMA/133 abar m2048@0xd9407000 port 0xd9407180 irq 54
[ 0.954341] ata3: DUMMY
[ 0.954399] ata4: DUMMY
[ 0.954448] ata5: DUMMY
[ 0.954497] ata6: DUMMY
[ 0.954753] ata1: hard resetting link
[ 0.954774] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.954956] ata2: hard resetting link
[ 0.957350] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.957596] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.957827] mousedev: PS/2 mouse device common for all mice
[ 0.958351] rtc_cmos 00:05: RTC can wake from S4
[ 0.958646] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.958735] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.958874] Intel P-state driver initializing.
[ 0.958947] Intel pstate controlling: cpu 0
[ 0.959088] Intel pstate controlling: cpu 1
[ 0.959159] Intel pstate controlling: cpu 2
[ 0.959228] Intel pstate controlling: cpu 3
[ 0.959485] cpuidle: using governor ladder
[ 0.959987] cpuidle: using governor menu
[ 0.960048] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.960121] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.960443] TCP: cubic registered
[ 0.960497] Initializing XFRM netlink socket
[ 0.960710] NET: Registered protocol family 10
[ 0.961193] NET: Registered protocol family 17
[ 0.961326] Key type dns_resolver registered
[ 0.961802] PM: Hibernation image not present or could not be loaded.
[ 0.961821] registered taskstats version 1
[ 0.963879] rtc_cmos 00:05: setting system clock to 2013-06-11 16:42:59 UTC (1370968979)
[ 0.976600] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.259502] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.260400] ata1.00: ATA-8: SAMSUNG MZRPC256HADR-000SO, CXM05S1Q, max UDMA/133
[ 1.260476] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.260559] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.261137] ata1.00: configured for UDMA/133
[ 1.261197] ata1: EH complete
[ 1.261303] ata2.00: ATA-8: SAMSUNG MZRPC256HADR-000SO, CXM05S1Q, max UDMA/133
[ 1.261392] ata2.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.261678] ata2.00: configured for UDMA/133
[ 1.261756] ata2: EH complete
[ 1.261813] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZRPC256 CXM0 PQ: 0 ANSI: 5
[ 1.262313] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.262572] sd 0:0:0:0: [sda] Write Protect is off
[ 1.262624] scsi 1:0:0:0: Direct-Access ATA SAMSUNG MZRPC256 CXM0 PQ: 0 ANSI: 5
[ 1.262718] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.262775] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.262799] sd 1:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.262962] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.263015] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.263070] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.263930] sda: sda1 sda2
[ 1.263931] sdb: unknown partition table
[ 1.264219] sda: p2 size 489641984 extends beyond EOD, enabling native capacity
[ 1.264369] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.265247] sda: sda1 sda2
[ 1.265351] sda: p2 size 489641984 extends beyond EOD, truncated
[ 1.265715] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.267000] Freeing unused kernel memory: 980k freed
[ 1.267224] Write protecting the kernel read-only data: 12288k
[ 1.272081] Freeing unused kernel memory: 1604k freed
[ 1.274935] Freeing unused kernel memory: 1256k freed
[ 1.300794] dracut: dracut-027-r3
[ 1.323552] device-mapper: uevent: version 1.0.3
[ 1.323746] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@xxxxxxxxxx
[ 1.327732] systemd-udevd[168]: starting version 204
[ 1.393343] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.393645] ehci-pci: EHCI PCI platform driver
[ 1.393890] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 1.393971] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.394165] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.394285] ehci-pci 0000:00:1a.0: debug port 2
[ 1.398325] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.398373] ehci-pci 0000:00:1a.0: irq 23, io mem 0xd9409000
[ 1.400160] scsi6 : pata_marvell
[ 1.400421] scsi7 : pata_marvell
[ 1.400555] ata7: PATA max UDMA/100 cmd 0x3018 ctl 0x3024 bmdma 0x3000 irq 19
[ 1.400612] ata8: PATA max UDMA/133 cmd 0x3010 ctl 0x3020 bmdma 0x3008 irq 19
[ 1.400736] ata7: no reset method available, skipping reset
[ 1.400794] ata7: XXX assuming ATAPI
[ 1.400848] ata7: XXX assuming ATAPI
[ 1.417607] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.419680] hub 1-0:1.0: USB hub found
[ 1.419821] hub 1-0:1.0: 2 ports detected
[ 1.420862] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.420976] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
[ 1.421087] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 1.421412] xhci_hcd 0000:04:00.0: irq 55 for MSI/MSI-X
[ 1.421425] xhci_hcd 0000:04:00.0: irq 56 for MSI/MSI-X
[ 1.421436] xhci_hcd 0000:04:00.0: irq 57 for MSI/MSI-X
[ 1.421447] xhci_hcd 0000:04:00.0: irq 58 for MSI/MSI-X
[ 1.421459] xhci_hcd 0000:04:00.0: irq 59 for MSI/MSI-X
[ 1.422232] xHCI xhci_add_endpoint called for root hub
[ 1.422236] xHCI xhci_check_bandwidth called for root hub
[ 1.422624] hub 2-0:1.0: USB hub found
[ 1.422817] hub 2-0:1.0: 2 ports detected
[ 1.423145] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.423184] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.423199] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 1.423232] ehci-pci 0000:00:1d.0: debug port 2
[ 1.423706] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[ 1.424925] xHCI xhci_add_endpoint called for root hub
[ 1.424929] xHCI xhci_check_bandwidth called for root hub
[ 1.427144] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.427188] ehci-pci 0000:00:1d.0: irq 20, io mem 0xd9408000
[ 1.427501] hub 4-0:1.0: USB hub found
[ 1.427611] hub 4-0:1.0: 2 ports detected
[ 1.450644] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.451421] hub 3-0:1.0: USB hub found
[ 1.451506] hub 3-0:1.0: 2 ports detected
[ 1.475852] md: bind<sda>
[ 1.501118] xhci_hcd 0000:1b:00.0: xHCI Host Controller
[ 1.501209] xhci_hcd 0000:1b:00.0: new USB bus registered, assigned bus number 5
[ 1.501835] xhci_hcd 0000:1b:00.0: irq 60 for MSI/MSI-X
[ 1.501847] xhci_hcd 0000:1b:00.0: irq 61 for MSI/MSI-X
[ 1.501857] xhci_hcd 0000:1b:00.0: irq 62 for MSI/MSI-X
[ 1.501868] xhci_hcd 0000:1b:00.0: irq 63 for MSI/MSI-X
[ 1.501891] xhci_hcd 0000:1b:00.0: irq 64 for MSI/MSI-X
[ 1.502543] xHCI xhci_add_endpoint called for root hub
[ 1.502546] xHCI xhci_check_bandwidth called for root hub
[ 1.502624] hub 5-0:1.0: USB hub found
[ 1.502748] hub 5-0:1.0: 2 ports detected
[ 1.503104] xhci_hcd 0000:1b:00.0: xHCI Host Controller
[ 1.503190] xhci_hcd 0000:1b:00.0: new USB bus registered, assigned bus number 6
[ 1.505263] xHCI xhci_add_endpoint called for root hub
[ 1.505266] xHCI xhci_check_bandwidth called for root hub
[ 1.505339] hub 6-0:1.0: USB hub found
[ 1.505437] hub 6-0:1.0: 2 ports detected
[ 1.517552] ata7.01: NODEV after polling detection
[ 1.633322] ata7.00: NODEV after polling detection
[ 1.649578] ata7: EH complete
[ 1.649721] ata8: soft resetting link
[ 1.681378] md: bind<sdb>
[ 1.689251] md: bind<sdb>
[ 1.690141] md: bind<sda>
[ 1.692128] md: raid0 personality registered for level 0
[ 1.692544] md/raid0:md126: md_size is 500129792 sectors.
[ 1.692598] md: RAID0 configuration for md126 - 1 zone
[ 1.692649] md: zone0=[sda/sdb]
[ 1.692797] zone-offset= 0KB, device-offset= 0KB, size= 250065152KB

[ 1.693005] md126: detected capacity change from 0 to 256066453504
[ 1.694342] md126: p1 p2
[ 1.718965] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.803022] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x122c00, board id: 1690, fw id: 934878
[ 1.834314] hub 1-1:1.0: USB hub found
[ 1.834518] hub 1-1:1.0: 6 ports detected
[ 1.837731] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input3
[ 1.901276] tsc: Refined TSC clocksource calibration: 2793.653 MHz
[ 1.901347] Switching to clocksource tsc
[ 1.938261] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 2.032155] dracut: luksOpen /dev/md126p2 luks-54ed2bf3-fb3d-4442-b8be-2f0cfda6a521
[ 2.053133] hub 3-1:1.0: USB hub found
[ 2.053276] hub 3-1:1.0: 8 ports detected
[ 2.207680] usb 5-1: new high-speed USB device number 2 using xhci_hcd
[ 2.222044] hub 5-1:1.0: USB hub found
[ 2.222451] hub 5-1:1.0: 2 ports detected
[ 2.286873] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 2.449289] usb 1-1.2: new full-speed USB device number 4 using ehci-pci
[ 2.615268] usb 1-1.3: new high-speed USB device number 5 using ehci-pci
[ 2.796523] usb 1-1.4: new high-speed USB device number 6 using ehci-pci
[ 2.885702] usb 1-1.4: config 1 has an invalid interface number: 8 but max is 3
[ 2.885813] usb 1-1.4: config 1 has no interface number 1
[ 6.838693] ata8.00: qc timeout (cmd 0xa1)
[ 6.838770] ata8.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 9.479998] sha256_ssse3: Using AVX optimized SHA-256 implementation
[ 9.481371] bio: create slab <bio-2> at 2
[ 9.642592] dracut: Scanning devices dm-0 for LVM logical volumes vaio/gentoo64a-root
[ 9.652952] dracut: inactive '/dev/vaio/gentoo64a-root' [16.00 GiB] inherit
[ 9.653090] dracut: inactive '/dev/vaio/portage' [12.00 GiB] inherit
[ 9.653215] dracut: inactive '/dev/vaio/home' [180.00 GiB] inherit
[ 11.894680] ata8: link is slow to respond, please be patient (ready=0)
[ 16.898884] ata8: device not ready (errno=-16), forcing hardreset
[ 16.898989] ata8: soft resetting link
[ 22.105337] ata8: link is slow to respond, please be patient (ready=0)
[ 26.956342] ata8: SRST failed (errno=-16)
[ 26.956437] ata8: soft resetting link
[ 32.162784] ata8: link is slow to respond, please be patient (ready=0)
[ 33.762251] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 33.777645] dracut: Checking ext4: /dev/vaio/gentoo64a-root
[ 33.777758] dracut: issuing e2fsck -a /dev/vaio/gentoo64a-root
[ 33.828619] dracut: /dev/vaio/gentoo64a-root: clean, 589317/1048576 files, 3694407/4194304 blocks
[ 33.830630] dracut: Mounting /dev/vaio/gentoo64a-root with -o noatime,ro
[ 33.835818] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 33.843691] dracut: Mounted root filesystem /dev/mapper/vaio-gentoo64a--root
[ 37.013803] ata8: SRST failed (errno=-16)
[ 37.013902] ata8: soft resetting link
[ 37.200457] ata8.00: ATAPI: Optiarc BD RW BD-5850H, 1.70, max UDMA/100
[ 37.207471] ata8.00: configured for UDMA/100
[ 37.208108] ata8: EH complete
[ 37.209925] scsi 7:0:0:0: CD-ROM Optiarc BD RW BD-5850H 1.70 PQ: 0 ANSI: 5
[ 37.212724] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
[ 37.212797] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 37.213474] sr 7:0:0:0: Attached scsi CD-ROM sr0
[ 37.226266] dracut: Switching root
[ 37.548157] systemd-udevd[630]: starting version 204
[ 37.628762] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251)
[ 37.628771] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 37.628776] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[ 37.628781] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 37.628783] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[ 37.628788] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 37.628790] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[ 37.628794] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 37.628796] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 37.628956] Linux agpgart interface v0.103
[ 37.633829] rtsx_pci 0000:03:00.0: irq 65 for MSI/MSI-X
[ 37.636314] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 65
[ 37.640120] [drm] Initialized drm 1.1.0 20060810
[ 37.646555] snd_hda_intel 0000:00:1b.0: irq 66 for MSI/MSI-X
[ 37.650772] cfg80211: Calling CRDA to update world regulatory domain
[ 37.658891] sony_laptop: Sony Notebook Control Driver v0.6
[ 37.659093] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/SNY5001:00/input/input4
[ 37.659944] input: Sony Vaio Jogdial as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/SNY5001:00/input/input5
[ 37.660168] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 37.660170] Copyright(c) 2003-2013 Intel Corporation
[ 37.660600] iwlwifi 0000:02:00.0: irq 67 for MSI/MSI-X
[ 37.666975] hda_codec: ALC275: SKU not ready 0x411111f0
[ 37.668521] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 37.671058] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 37.682189] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 37.682193] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 37.682195] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 37.682198] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
[ 37.682200] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_P2P disabled
[ 37.682203] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0
[ 37.682338] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 37.686626] sony_laptop: brightness ignored, must be controlled by ACPI video driver
[ 37.696610] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 37.700781] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 37.700791] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 37.701160] r8169 0000:05:00.0: irq 68 for MSI/MSI-X
[ 37.701630] r8169 0000:05:00.0 eth0: RTL8168evl/8111evl at 0xffffc9001167e000, 54:42:49:9a:df:1e, XID 0c900800 IRQ 68
[ 37.701632] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 37.701752] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 37.702066] r8169 0000:19:00.0: irq 69 for MSI/MSI-X
[ 37.702315] r8169 0000:19:00.0 eth1: RTL8168evl/8111evl at 0xffffc90011d7a000, 54:42:49:9a:de:86, XID 0c900800 IRQ 69
[ 37.702316] r8169 0000:19:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 37.710669] hda-intel 0000:16:00.1: Handle VGA-switcheroo audio client
[ 37.710836] snd_hda_intel 0000:16:00.1: irq 70 for MSI/MSI-X
[ 37.713501] [drm] Memory usable by graphics device = 2048M
[ 37.713582] i915 0000:00:02.0: setting latency timer to 64
[ 37.713866] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 37.716628] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1c.6/0000:08:00.0/0000:0a:04.0/0000:14:00.0/0000:15:03.0/0000:16:00.1/sound/card1/input9
[ 37.721815] usbcore: registered new interface driver usbserial
[ 37.721834] usbcore: registered new interface driver usbserial_generic
[ 37.722482] usbserial: USB Serial support registered for generic
[ 37.731321] usbcore: registered new interface driver qcserial
[ 37.731354] usbserial: USB Serial support registered for Qualcomm USB modem
[ 37.732405] qcserial 1-1.4:1.0: Qualcomm USB modem converter detected
[ 37.735224] usb 1-1.4: Qualcomm USB modem converter now attached to ttyUSB0
[ 37.735461] Bluetooth: Core ver 2.16
[ 37.735499] NET: Registered protocol family 31
[ 37.735501] Bluetooth: HCI device and connection manager initialized
[ 37.735539] Bluetooth: HCI socket layer initialized
[ 37.735545] Bluetooth: L2CAP socket layer initialized
[ 37.735566] Bluetooth: SCO socket layer initialized
[ 37.736529] qcserial 1-1.4:1.2: Qualcomm USB modem converter detected
[ 37.737650] usb 1-1.4: Qualcomm USB modem converter now attached to ttyUSB1
[ 37.739526] qcserial 1-1.4:1.3: Qualcomm USB modem converter detected
[ 37.739744] usb 1-1.4: Qualcomm USB modem converter now attached to ttyUSB2
[ 37.741610] i915 0000:00:02.0: irq 71 for MSI/MSI-X
[ 37.741624] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 37.741626] [drm] Driver supports precise vblank timestamp query.
[ 37.742179] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 37.742182] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:16:00.0
[ 37.745767] usbcore: registered new interface driver btusb
[ 37.759514] media: Linux media interface: v0.10
[ 37.762861] Linux video capture interface: v2.00
[ 37.767951] uvcvideo: Found UVC 1.00 device USB2.0 Camera (05c8:0318)
[ 37.771370] input: USB2.0 Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input10
[ 37.771711] usbcore: registered new interface driver uvcvideo
[ 37.771713] USB Video Class driver (1.1.1)
[ 37.790634] [drm] Wrong MCH_SSKPD value: 0x16040307
[ 37.790636] [drm] This can cause pipe underruns and display issues.
[ 37.790637] [drm] Please upgrade your BIOS to fix this.
[ 37.807617] fbcon: inteldrmfb (fb0) is primary device
[ 37.818560] input: PC Speaker as /devices/platform/pcspkr/input/input11
[ 37.822024] Error: Driver 'pcspkr' is already registered, aborting...
[ 37.832171] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x14
[ 37.833162] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x14
[ 37.833616] microcode: CPU0 updated to revision 0x28, date = 2012-04-24
[ 37.833625] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x14
[ 37.833664] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x14
[ 37.833899] microcode: CPU1 updated to revision 0x28, date = 2012-04-24
[ 37.834061] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x14
[ 37.834118] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x14
[ 37.834388] microcode: CPU2 updated to revision 0x28, date = 2012-04-24
[ 37.834400] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x14
[ 37.834454] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x14
[ 37.834725] microcode: CPU3 updated to revision 0x28, date = 2012-04-24
[ 37.834747] perf_event_intel: PEBS enabled due to microcode update
[ 37.834838] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 37.880340] iTCO_vendor_support: vendor-support=0
[ 37.882347] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 37.882387] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 37.923249] cfg80211: World regulatory domain updated:
[ 37.923250] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 37.923252] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 37.923254] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 37.923255] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 37.923257] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 37.923258] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 37.934953] systemd-udevd[660]: renamed network interface eth0 to enp5s0
[ 37.942944] systemd-udevd[650]: renamed network interface wlan0 to wlp2s0
[ 37.950961] systemd-udevd[659]: renamed network interface eth1 to enp25s0
[ 39.608683] Console: switching to colour frame buffer device 240x67
[ 39.612191] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 39.612193] i915 0000:00:02.0: registered panic notifier
[ 39.612681] [Firmware Bug]: ACPI(GFXA) defines _DOD but not _DOS
[ 39.614260] acpi LNXVIDEO:02: registered as cooling_device5
[ 39.614493] ACPI: Video Device [GFXA] (multi-head: yes rom: no post: no)
[ 39.614720] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1f/device:20/device:23/device:24/device:25/LNXVIDEO:00/input/input12
[ 39.615534] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 39.615555] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 39.615579] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 39.615597] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 39.615616] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 39.615642] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 39.615662] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 39.617533] acpi device:3e: registered as cooling_device6
[ 39.617753] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 39.617864] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:09/input/input13
[ 39.618004] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 39.618157] ACPI Warning: 0x000000000000a040-0x000000000000a05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130328/utaddress-251)
[ 39.618164] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 39.774697] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp on
[ 40.700279] EXT4-fs (dm-1): re-mounted. Opts: (null)
[ 40.777600] EXT4-fs (md126p1): mounted filesystem with ordered data mode. Opts: (null)
[ 40.782531] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 40.788151] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[ 41.237801] microcode: Microcode Update Driver: v2.00 removed.
[ 41.694248] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 41.701222] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 42.084405] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 42.091280] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 42.301781] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 43.658254] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 43.658257] Bluetooth: BNEP filters: protocol multicast
[ 43.658266] Bluetooth: BNEP socket layer initialized
[ 43.831333] Bluetooth: RFCOMM TTY layer initialized
[ 43.831352] Bluetooth: RFCOMM socket layer initialized
[ 43.831354] Bluetooth: RFCOMM ver 1.11
[ 44.377842] zram: module is from the staging directory, the quality is unknown, you have been warned.
[ 44.379602] zram: Created 4 device(s) ...
[ 44.392072] Adding 1572860k swap on /dev/zram0. Priority:10 extents:1 across:1572860k SSFS
[ 44.398198] Adding 1572860k swap on /dev/zram1. Priority:10 extents:1 across:1572860k SSFS
[ 44.404333] Adding 1572860k swap on /dev/zram2. Priority:10 extents:1 across:1572860k SSFS
[ 44.410465] Adding 1572860k swap on /dev/zram3. Priority:10 extents:1 across:1572860k SSFS
[ 45.594362] wlp2s0: authenticate with 08:60:6e:cc:a2:94
[ 45.601155] wlp2s0: send auth to 08:60:6e:cc:a2:94 (try 1/3)
[ 45.624596] wlp2s0: authenticated
[ 45.625576] wlp2s0: associate with 08:60:6e:cc:a2:94 (try 1/3)
[ 45.626471] wlp2s0: RX AssocResp from 08:60:6e:cc:a2:94 (capab=0x11 status=0 aid=1)
[ 45.629899] wlp2s0: associated
[ 45.629988] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 48.582501] fuse init (API version 7.22)
[ 48.842322] ata1.00: configured for UDMA/133
[ 48.842342] ata1: EH complete
[ 48.851794] ata2.00: configured for UDMA/133
[ 48.851800] ata2: EH complete
[ 48.932755] EXT4-fs (dm-1): re-mounted. Opts: commit=0
[ 48.937799] EXT4-fs (md126p1): re-mounted. Opts: commit=0
[ 48.940814] EXT4-fs (dm-2): re-mounted. Opts: commit=0
[ 48.952575] EXT4-fs (dm-3): re-mounted. Opts: commit=0
[ 73.485059] acpiphp_glue: __handle_hotplug_event_func: Device eject notify on \_SB_.PCI0.RP07.LPMB
[ 73.490650] xhci_hcd 0000:1b:00.0: remove, state 4
[ 73.490860] usb usb6: USB disconnect, device number 1
[ 73.494335] xHCI xhci_drop_endpoint called for root hub
[ 73.494341] xHCI xhci_check_bandwidth called for root hub
[ 73.504733] xhci_hcd 0000:1b:00.0: USB bus 6 deregistered
[ 73.504772] xhci_hcd 0000:1b:00.0: remove, state 4
[ 73.504819] usb usb5: USB disconnect, device number 1
[ 73.504823] usb 5-1: USB disconnect, device number 2
[ 73.507049] xHCI xhci_drop_endpoint called for root hub
[ 73.507060] xHCI xhci_check_bandwidth called for root hub
[ 73.508560] xhci_hcd 0000:1b:00.0: USB bus 5 deregistered
[ 73.519456] ata8.00: disabled
[ 73.525555] cdrom: issuing MRW background format suspend
[ 73.527318] INFO: trying to register non-static key.
[ 73.527322] the code is fine but needs lockdep annotation.
[ 73.527324] turning off the locking correctness validator.
[ 73.527328] CPU: 0 PID: 40 Comm: kworker/0:1 Tainted: G C 3.10.0-rc4 #7
[ 73.527330] Hardware name: Sony Corporation VPCZ23A4R/VAIO, BIOS R1013H5 05/21/2012
[ 73.527335] Workqueue: kacpi_hotplug acpi_os_execute_deferred
[ 73.527338] ffff880253db0000 ffff880253db9688 ffffffff8165aab8 ffff880253db9778
[ 73.527343] ffffffff810a018e ffff880200000014 ffffffff81079f6a ffff880200000000
[ 73.527348] ffff880200000000 ffff880200000000 00000000000005de ffff880253db9728
[ 73.527353] Call Trace:
[ 73.527359] [<ffffffff8165aab8>] dump_stack+0x19/0x1b
[ 73.527363] [<ffffffff810a018e>] __lock_acquire+0x181e/0x1ee0
[ 73.527368] [<ffffffff81079f6a>] ? update_curr+0x1fa/0x200
[ 73.527371] [<ffffffff810a1751>] ? mark_held_locks+0x61/0x150
[ 73.527375] [<ffffffff810a1aae>] ? debug_check_no_locks_freed+0x8e/0x160
[ 73.527380] [<ffffffff8105b940>] ? queue_delayed_work_on+0xa0/0xa0
[ 73.527383] [<ffffffff810a0e77>] lock_acquire+0x87/0x150
[ 73.527387] [<ffffffff8105b940>] ? queue_delayed_work_on+0xa0/0xa0
[ 73.527390] [<ffffffff8109c430>] ? lockdep_init_map+0xb0/0x530
[ 73.527394] [<ffffffff8105b978>] flush_work+0x38/0x270
[ 73.527398] [<ffffffff8105b940>] ? queue_delayed_work_on+0xa0/0xa0
[ 73.527401] [<ffffffff810a1751>] ? mark_held_locks+0x61/0x150
[ 73.527405] [<ffffffff8105d645>] ? __cancel_work_timer+0xa5/0x110
[ 73.527408] [<ffffffff810a1945>] ? trace_hardirqs_on_caller+0x105/0x1d0
[ 73.527411] [<ffffffff8105d61a>] __cancel_work_timer+0x7a/0x110
[ 73.527415] [<ffffffff8105d6cb>] cancel_work_sync+0xb/0x10
[ 73.527421] [<ffffffffa05333ae>] rtl_remove_one+0x5e/0x140 [r8169]
[ 73.527426] [<ffffffff81385631>] pci_device_remove+0x41/0xc0
[ 73.527432] [<ffffffff8143bd47>] __device_release_driver+0x77/0xe0
[ 73.527436] [<ffffffff8143bdd9>] device_release_driver+0x29/0x40
[ 73.527440] [<ffffffff8143b7e1>] bus_remove_device+0xf1/0x140
[ 73.527443] [<ffffffff81438ecd>] device_del+0x11d/0x1b0
[ 73.527447] [<ffffffff8138062c>] pci_stop_bus_device+0x9c/0xb0
[ 73.527451] [<ffffffff813805cb>] pci_stop_bus_device+0x3b/0xb0
[ 73.527454] [<ffffffff813805cb>] pci_stop_bus_device+0x3b/0xb0
[ 73.527458] [<ffffffff813805cb>] pci_stop_bus_device+0x3b/0xb0
[ 73.527462] [<ffffffff813a0fe5>] ? acpiphp_disable_slot+0x35/0x140
[ 73.527466] [<ffffffff813805cb>] pci_stop_bus_device+0x3b/0xb0
[ 73.527469] [<ffffffff813805cb>] pci_stop_bus_device+0x3b/0xb0
[ 73.527472] [<ffffffff813805cb>] pci_stop_bus_device+0x3b/0xb0
[ 73.527476] [<ffffffff81380791>] pci_stop_and_remove_bus_device+0x11/0x20
[ 73.527479] [<ffffffff813a1036>] acpiphp_disable_slot+0x86/0x140
[ 73.527483] [<ffffffff813a13da>] __handle_hotplug_event_func+0xba/0x1a0
[ 73.527487] [<ffffffff813c729b>] hotplug_dock_devices+0x57/0xda
[ 73.527491] [<ffffffff813c79a1>] handle_eject_request+0xaf/0xdf
[ 73.527494] [<ffffffff813c7b6f>] acpi_dock_deferred_cb+0x163/0x1c8
[ 73.527498] [<ffffffff813bfba9>] acpi_os_execute_deferred+0x20/0x2d
[ 73.527502] [<ffffffff8105c212>] process_one_work+0x1c2/0x560
[ 73.527505] [<ffffffff8105c1a7>] ? process_one_work+0x157/0x560
[ 73.527509] [<ffffffff8105d126>] worker_thread+0x116/0x370
[ 73.527512] [<ffffffff8105d010>] ? manage_workers.isra.20+0x2d0/0x2d0
[ 73.527516] [<ffffffff81063986>] kthread+0xd6/0xe0
[ 73.527520] [<ffffffff81660ccb>] ? _raw_spin_unlock_irq+0x2b/0x60
[ 73.527525] [<ffffffff810638b0>] ? __init_kthread_worker+0x70/0x70
[ 73.527529] [<ffffffff8166806c>] ret_from_fork+0x7c/0xb0
[ 73.527533] [<ffffffff810638b0>] ? __init_kthread_worker+0x70/0x70
[ 241.215872] INFO: task kworker/0:1:40 blocked for more than 120 seconds.
[ 241.215876] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 241.215878] kworker/0:1 D ffff8802543df0e8 0 40 2 0x00000000
[ 241.215887] Workqueue: kacpi_hotplug acpi_os_execute_deferred
[ 241.215889] ffff880253db9918 0000000000000046 0000000000000000 ffff880253db9940
[ 241.215894] ffffffff810642b5 ffff880253db9fd8 ffff880253db9fd8 0000000000004000
[ 241.215898] ffffffff81c11440 ffff880253db0000 ffff880200000000 0000000081359e89
[ 241.215903] Call Trace:
[ 241.215910] [<ffffffff810642b5>] ? prepare_to_wait+0x25/0x90
[ 241.215914] [<ffffffff810a1a1d>] ? trace_hardirqs_on+0xd/0x10
[ 241.215918] [<ffffffff81660c5d>] ? _raw_spin_unlock_irqrestore+0x3d/0x80
[ 241.215921] [<ffffffff810642e9>] ? prepare_to_wait+0x59/0x90
[ 241.215925] [<ffffffff8165f284>] schedule+0x24/0x70
[ 241.215942] [<ffffffffa015ca75>] snd_card_free+0x65/0xb0 [snd]
[ 241.215946] [<ffffffff81064470>] ? __init_waitqueue_head+0x60/0x60
[ 241.215950] [<ffffffffa033896b>] azx_remove+0x4b/0x70 [snd_hda_intel]
[ 241.215954] [<ffffffff81385631>] pci_device_remove+0x41/0xc0
[ 241.215959] [<ffffffff8143bd47>] __device_release_driver+0x77/0xe0
[ 241.215962] [<ffffffff8143bdd9>] device_release_driver+0x29/0x40
[ 241.215965] [<ffffffff8143b7e1>] bus_remove_device+0xf1/0x140
[ 241.215968] [<ffffffff81438ecd>] device_del+0x11d/0x1b0
[ 241.215972] [<ffffffff8138062c>] pci_stop_bus_device+0x9c/0xb0
[ 241.215975] [<ffffffff813805cb>] pci_stop_bus_device+0x3b/0xb0
[ 241.215978] [<ffffffff813a0fe5>] ? acpiphp_disable_slot+0x35/0x140
[ 241.215981] [<ffffffff813805cb>] pci_stop_bus_device+0x3b/0xb0
[ 241.215983] [<ffffffff813805cb>] pci_stop_bus_device+0x3b/0xb0
[ 241.215986] [<ffffffff813805cb>] pci_stop_bus_device+0x3b/0xb0
[ 241.215989] [<ffffffff81380791>] pci_stop_and_remove_bus_device+0x11/0x20
[ 241.215991] [<ffffffff813a1036>] acpiphp_disable_slot+0x86/0x140
[ 241.215994] [<ffffffff813a13da>] __handle_hotplug_event_func+0xba/0x1a0
[ 241.215997] [<ffffffff813c729b>] hotplug_dock_devices+0x57/0xda
[ 241.216000] [<ffffffff813c79a1>] handle_eject_request+0xaf/0xdf
[ 241.216002] [<ffffffff813c7b6f>] acpi_dock_deferred_cb+0x163/0x1c8
[ 241.216005] [<ffffffff813bfba9>] acpi_os_execute_deferred+0x20/0x2d
[ 241.216009] [<ffffffff8105c212>] process_one_work+0x1c2/0x560
[ 241.216012] [<ffffffff8105c1a7>] ? process_one_work+0x157/0x560
[ 241.216014] [<ffffffff8105d126>] worker_thread+0x116/0x370
[ 241.216017] [<ffffffff8105d010>] ? manage_workers.isra.20+0x2d0/0x2d0
[ 241.216020] [<ffffffff81063986>] kthread+0xd6/0xe0
[ 241.216022] [<ffffffff81660ccb>] ? _raw_spin_unlock_irq+0x2b/0x60
[ 241.216025] [<ffffffff810638b0>] ? __init_kthread_worker+0x70/0x70
[ 241.216029] [<ffffffff8166806c>] ret_from_fork+0x7c/0xb0
[ 241.216032] [<ffffffff810638b0>] ? __init_kthread_worker+0x70/0x70
[ 241.216033] INFO: lockdep is turned off.
[ 361.364794] INFO: task kworker/0:1:40 blocked for more than 120 seconds.
[ 361.364799] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 361.364801] kworker/0:1 D ffff8802543df0e8 0 40 2 0x00000000
[ 361.364824] Workqueue: kacpi_hotplug acpi_os_execute_deferred
[ 361.364828] ffff880253db9918 0000000000000046 0000000000000000 ffff880253db9940
[ 361.364837] ffffffff810642b5 ffff880253db9fd8 ffff880253db9fd8 0000000000004000
[ 361.364845] ffffffff81c11440 ffff880253db0000 ffff880200000000 0000000081359e89
[ 361.364854] Call Trace:
[ 361.364866] [<ffffffff810642b5>] ? prepare_to_wait+0x25/0x90
[ 361.364873] [<ffffffff810a1a1d>] ? trace_hardirqs_on+0xd/0x10
[ 361.364880] [<ffffffff81660c5d>] ? _raw_spin_unlock_irqrestore+0x3d/0x80
[ 361.364886] [<ffffffff810642e9>] ? prepare_to_wait+0x59/0x90
[ 361.364893] [<ffffffff8165f284>] schedule+0x24/0x70
[ 361.364918] [<ffffffffa015ca75>] snd_card_free+0x65/0xb0 [snd]
[ 361.364924] [<ffffffff81064470>] ? __init_waitqueue_head+0x60/0x60
[ 361.364932] [<ffffffffa033896b>] azx_remove+0x4b/0x70 [snd_hda_intel]
[ 361.364940] [<ffffffff81385631>] pci_device_remove+0x41/0xc0
[ 361.364948] [<ffffffff8143bd47>] __device_release_driver+0x77/0xe0
[ 361.364954] [<ffffffff8143bdd9>] device_release_driver+0x29/0x40
[ 361.364960] [<ffffffff8143b7e1>] bus_remove_device+0xf1/0x140
[ 361.364965] [<ffffffff81438ecd>] device_del+0x11d/0x1b0
[ 361.364972] [<ffffffff8138062c>] pci_stop_bus_device+0x9c/0xb0
[ 361.364977] [<ffffffff813805cb>] pci_stop_bus_device+0x3b/0xb0
[ 361.364983] [<ffffffff813a0fe5>] ? acpiphp_disable_slot+0x35/0x140
[ 361.364989] [<ffffffff813805cb>] pci_stop_bus_device+0x3b/0xb0
[ 361.364994] [<ffffffff813805cb>] pci_stop_bus_device+0x3b/0xb0
[ 361.364999] [<ffffffff813805cb>] pci_stop_bus_device+0x3b/0xb0
[ 361.365005] [<ffffffff81380791>] pci_stop_and_remove_bus_device+0x11/0x20
[ 361.365010] [<ffffffff813a1036>] acpiphp_disable_slot+0x86/0x140
[ 361.365016] [<ffffffff813a13da>] __handle_hotplug_event_func+0xba/0x1a0
[ 361.365022] [<ffffffff813c729b>] hotplug_dock_devices+0x57/0xda
[ 361.365027] [<ffffffff813c79a1>] handle_eject_request+0xaf/0xdf
[ 361.365032] [<ffffffff813c7b6f>] acpi_dock_deferred_cb+0x163/0x1c8
[ 361.365037] [<ffffffff813bfba9>] acpi_os_execute_deferred+0x20/0x2d
[ 361.365044] [<ffffffff8105c212>] process_one_work+0x1c2/0x560
[ 361.365050] [<ffffffff8105c1a7>] ? process_one_work+0x157/0x560
[ 361.365055] [<ffffffff8105d126>] worker_thread+0x116/0x370
[ 361.365060] [<ffffffff8105d010>] ? manage_workers.isra.20+0x2d0/0x2d0
[ 361.365066] [<ffffffff81063986>] kthread+0xd6/0xe0
[ 361.365071] [<ffffffff81660ccb>] ? _raw_spin_unlock_irq+0x2b/0x60
[ 361.365078] [<ffffffff810638b0>] ? __init_kthread_worker+0x70/0x70
[ 361.365085] [<ffffffff8166806c>] ret_from_fork+0x7c/0xb0
[ 361.365091] [<ffffffff810638b0>] ? __init_kthread_worker+0x70/0x70
[ 361.365094] INFO: lockdep is turned off.
[ 0.897483] ata2: hard resetting link
[ 0.897509] ata1: hard resetting link
[ 0.900211] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.900459] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.900706] mousedev: PS/2 mouse device common for all mice
[ 0.901228] rtc_cmos 00:05: RTC can wake from S4
[ 0.901529] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.901644] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.901791] Intel P-state driver initializing.
[ 0.901871] Intel pstate controlling: cpu 0
[ 0.902003] Intel pstate controlling: cpu 1
[ 0.902081] Intel pstate controlling: cpu 2
[ 0.902156] Intel pstate controlling: cpu 3
[ 0.902444] cpuidle: using governor ladder
[ 0.902984] cpuidle: using governor menu
[ 0.903048] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.903124] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.903419] TCP: cubic registered
[ 0.903478] Initializing XFRM netlink socket
[ 0.903714] NET: Registered protocol family 10
[ 0.904199] NET: Registered protocol family 17
[ 0.904337] Key type dns_resolver registered
[ 0.904821] PM: Hibernation image not present or could not be loaded.
[ 0.904841] registered taskstats version 1
[ 0.905989] rtc_cmos 00:05: setting system clock to 2013-06-11 16:36:40 UTC (1370968600)
[ 0.920003] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.202092] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.202227] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.203040] ata1.00: ATA-8: SAMSUNG MZRPC256HADR-000SO, CXM05S1Q, max UDMA/133
[ 1.203152] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.203259] ata2.00: ATA-8: SAMSUNG MZRPC256HADR-000SO, CXM05S1Q, max UDMA/133
[ 1.203364] ata2.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.203836] ata1.00: configured for UDMA/133
[ 1.203958] ata1: EH complete
[ 1.204106] ata2.00: configured for UDMA/133
[ 1.204185] ata2: EH complete
[ 1.204960] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZRPC256 CXM0 PQ: 0 ANSI: 5
[ 1.206019] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.206401] sd 0:0:0:0: [sda] Write Protect is off
[ 1.206487] scsi 1:0:0:0: Direct-Access ATA SAMSUNG MZRPC256 CXM0 PQ: 0 ANSI: 5
[ 1.206561] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.206617] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.206669] sd 1:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.206865] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.206924] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.206993] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.207795] sda: sda1 sda2
[ 1.207797] sdb: unknown partition table
[ 1.208124] sda: p2 size 489641984 extends beyond EOD, enabling native capacity
[ 1.208362] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.209360] sda: sda1 sda2
[ 1.209523] sda: p2 size 489641984 extends beyond EOD, truncated
[ 1.210085] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.210928] Freeing unused kernel memory: 980k freed
[ 1.211110] Write protecting the kernel read-only data: 12288k
[ 1.213963] Freeing unused kernel memory: 1604k freed
[ 1.216221] Freeing unused kernel memory: 1256k freed
[ 1.241426] dracut: dracut-027-r3
[ 1.263955] device-mapper: uevent: version 1.0.3
[ 1.264187] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@xxxxxxxxxx
[ 1.268190] systemd-udevd[168]: starting version 204
[ 1.330770] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.330957] ehci-pci: EHCI PCI platform driver
[ 1.331164] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 1.331211] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.331370] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.331476] ehci-pci 0000:00:1a.0: debug port 2
[ 1.335486] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.335555] ehci-pci 0000:00:1a.0: irq 23, io mem 0xd9409000
[ 1.341130] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.342293] hub 1-0:1.0: USB hub found
[ 1.342384] hub 1-0:1.0: 2 ports detected
[ 1.343026] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.343176] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 1.343644] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
[ 1.343964] xhci_hcd 0000:04:00.0: irq 42 for MSI/MSI-X
[ 1.343971] xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X
[ 1.343978] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X
[ 1.343985] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X
[ 1.343991] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X
[ 1.344407] xHCI xhci_add_endpoint called for root hub
[ 1.344409] xHCI xhci_check_bandwidth called for root hub
[ 1.344450] hub 2-0:1.0: USB hub found
[ 1.344542] hub 2-0:1.0: 2 ports detected
[ 1.344782] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.344799] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.344811] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 1.344831] ehci-pci 0000:00:1d.0: debug port 2
[ 1.345415] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[ 1.347506] xHCI xhci_add_endpoint called for root hub
[ 1.347508] xHCI xhci_check_bandwidth called for root hub
[ 1.347572] hub 4-0:1.0: USB hub found
[ 1.347672] hub 4-0:1.0: 2 ports detected
[ 1.348746] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.348773] ehci-pci 0000:00:1d.0: irq 20, io mem 0xd9408000
[ 1.354151] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.355219] hub 3-0:1.0: USB hub found
[ 1.355299] hub 3-0:1.0: 2 ports detected
[ 1.382366] md: bind<sda>
[ 1.591246] md: bind<sdb>
[ 1.600759] md: bind<sdb>
[ 1.601135] md: bind<sda>
[ 1.605778] md: raid0 personality registered for level 0
[ 1.606208] md/raid0:md126: md_size is 500129792 sectors.
[ 1.606276] md: RAID0 configuration for md126 - 1 zone
[ 1.606338] md: zone0=[sda/sdb]
[ 1.606557] zone-offset= 0KB, device-offset= 0KB, size= 250065152KB

[ 1.606764] md126: detected capacity change from 0 to 256066453504
[ 1.608113] md126: p1 p2
[ 1.644518] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.681374] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x122c00, board id: 1690, fw id: 934878
[ 1.716432] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input3
[ 1.760517] hub 1-1:1.0: USB hub found
[ 1.760754] hub 1-1:1.0: 6 ports detected
[ 1.847112] tsc: Refined TSC clocksource calibration: 2793.652 MHz
[ 1.847250] Switching to clocksource tsc
[ 1.864882] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.971773] dracut: luksOpen /dev/md126p2 luks-54ed2bf3-fb3d-4442-b8be-2f0cfda6a521
[ 1.979841] hub 3-1:1.0: USB hub found
[ 1.980090] hub 3-1:1.0: 8 ports detected
[ 2.055202] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 2.218424] usb 1-1.2: new full-speed USB device number 4 using ehci-pci
[ 2.374820] usb 1-1.3: new high-speed USB device number 5 using ehci-pci
[ 2.555843] usb 1-1.4: new high-speed USB device number 6 using ehci-pci
[ 2.633990] usb 1-1.4: config 1 has an invalid interface number: 8 but max is 3
[ 2.634103] usb 1-1.4: config 1 has no interface number 1
[ 9.499533] sha256_ssse3: Using AVX optimized SHA-256 implementation
[ 9.500913] bio: create slab <bio-2> at 2
[ 9.661684] dracut: Scanning devices dm-0 for LVM logical volumes vaio/gentoo64a-root
[ 9.672910] dracut: inactive '/dev/vaio/gentoo64a-root' [16.00 GiB] inherit
[ 9.673025] dracut: inactive '/dev/vaio/portage' [12.00 GiB] inherit
[ 9.673152] dracut: inactive '/dev/vaio/home' [180.00 GiB] inherit
[ 9.715892] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 9.728023] dracut: Checking ext4: /dev/vaio/gentoo64a-root
[ 9.728118] dracut: issuing e2fsck -a /dev/vaio/gentoo64a-root
[ 9.778642] dracut: /dev/vaio/gentoo64a-root: clean, 589316/1048576 files, 3694223/4194304 blocks
[ 9.780447] dracut: Mounting /dev/vaio/gentoo64a-root with -o noatime,ro
[ 9.785271] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 9.793074] dracut: Mounted root filesystem /dev/mapper/vaio-gentoo64a--root
[ 9.806872] dracut: Switching root
[ 10.126336] systemd-udevd[629]: starting version 204
[ 10.206381] ACPI Warning: 0x000000000000a040-0x000000000000a05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130328/utaddress-251)
[ 10.206390] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.207378] Linux agpgart interface v0.103
[ 10.209493] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251)
[ 10.209499] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.209503] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[ 10.209506] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.209507] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[ 10.209920] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.209923] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[ 10.209928] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.209930] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 10.212043] [drm] Initialized drm 1.1.0 20060810
[ 10.240380] rtsx_pci 0000:03:00.0: irq 47 for MSI/MSI-X
[ 10.240399] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 47
[ 10.296076] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 10.296453] r8169 0000:05:00.0: irq 48 for MSI/MSI-X
[ 10.297125] r8169 0000:05:00.0 eth0: RTL8168evl/8111evl at 0xffffc9001168e000, 54:42:49:9a:df:1e, XID 0c900800 IRQ 48
[ 10.297129] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 10.300282] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 10.302038] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x14
[ 10.305228] [drm] Memory usable by graphics device = 2048M
[ 10.305301] i915 0000:00:02.0: setting latency timer to 64
[ 10.306980] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x14
[ 10.307455] microcode: CPU0 updated to revision 0x28, date = 2012-04-24
[ 10.307470] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x14
[ 10.307531] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x14
[ 10.307762] microcode: CPU1 updated to revision 0x28, date = 2012-04-24
[ 10.307781] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x14
[ 10.307831] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x14
[ 10.308064] microcode: CPU2 updated to revision 0x28, date = 2012-04-24
[ 10.308073] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x14
[ 10.308123] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x14
[ 10.308364] microcode: CPU3 updated to revision 0x28, date = 2012-04-24
[ 10.308392] perf_event_intel: PEBS enabled due to microcode update
[ 10.308850] Error: Driver 'pcspkr' is already registered, aborting...
[ 10.310811] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 10.323516] sony_laptop: Sony Notebook Control Driver v0.6
[ 10.323730] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/SNY5001:00/input/input5
[ 10.323916] input: Sony Vaio Jogdial as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/SNY5001:00/input/input6
[ 10.328468] cfg80211: Calling CRDA to update world regulatory domain
[ 10.338494] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 10.338498] Copyright(c) 2003-2013 Intel Corporation
[ 10.339978] iwlwifi 0000:02:00.0: irq 49 for MSI/MSI-X
[ 10.345226] Bluetooth: Core ver 2.16
[ 10.345259] NET: Registered protocol family 31
[ 10.345262] Bluetooth: HCI device and connection manager initialized
[ 10.345309] Bluetooth: HCI socket layer initialized
[ 10.345315] Bluetooth: L2CAP socket layer initialized
[ 10.345333] Bluetooth: SCO socket layer initialized
[ 10.348877] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 10.353032] usbcore: registered new interface driver usbserial
[ 10.353065] usbcore: registered new interface driver usbserial_generic
[ 10.353319] usbserial: USB Serial support registered for generic
[ 10.353765] media: Linux media interface: v0.10
[ 10.358385] Linux video capture interface: v2.00
[ 10.358797] usbcore: registered new interface driver btusb
[ 10.364373] usbcore: registered new interface driver qcserial
[ 10.364400] usbserial: USB Serial support registered for Qualcomm USB modem
[ 10.365071] sony_laptop: brightness ignored, must be controlled by ACPI video driver
[ 10.365559] qcserial 1-1.4:1.0: Qualcomm USB modem converter detected
[ 10.365732] usb 1-1.4: Qualcomm USB modem converter now attached to ttyUSB0
[ 10.367052] qcserial 1-1.4:1.2: Qualcomm USB modem converter detected
[ 10.367187] usb 1-1.4: Qualcomm USB modem converter now attached to ttyUSB1
[ 10.368431] i915 0000:00:02.0: irq 50 for MSI/MSI-X
[ 10.368455] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 10.368457] [drm] Driver supports precise vblank timestamp query.
[ 10.368591] qcserial 1-1.4:1.3: Qualcomm USB modem converter detected
[ 10.368801] usb 1-1.4: Qualcomm USB modem converter now attached to ttyUSB2
[ 10.370402] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 10.370407] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 10.370410] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 10.370413] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
[ 10.370415] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_P2P disabled
[ 10.370419] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0
[ 10.370535] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 10.371815] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 10.372315] uvcvideo: Found UVC 1.00 device USB2.0 Camera (05c8:0318)
[ 10.376175] input: USB2.0 Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input7
[ 10.376809] usbcore: registered new interface driver uvcvideo
[ 10.376812] USB Video Class driver (1.1.1)
[ 10.393052] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 10.422580] [drm] Wrong MCH_SSKPD value: 0x16040307
[ 10.422584] [drm] This can cause pipe underruns and display issues.
[ 10.422586] [drm] Please upgrade your BIOS to fix this.
[ 10.425214] iTCO_vendor_support: vendor-support=0
[ 10.426888] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 10.426928] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 10.441936] fbcon: inteldrmfb (fb0) is primary device
[ 10.452554] systemd-udevd[656]: renamed network interface eth0 to enp5s0
[ 10.469477] cfg80211: World regulatory domain updated:
[ 10.469479] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.469481] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.469483] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.469484] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.469485] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.469486] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.495555] systemd-udevd[644]: renamed network interface wlan0 to wlp2s0
[ 11.743584] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp on
[ 12.164969] Console: switching to colour frame buffer device 240x67
[ 12.168141] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 12.168143] i915 0000:00:02.0: registered panic notifier
[ 12.168622] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 12.168632] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 12.168641] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 12.168651] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 12.168661] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 12.168670] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 12.168679] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 12.170170] acpi device:3e: registered as cooling_device5
[ 12.170385] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 12.170453] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:09/input/input8
[ 12.170790] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 12.171106] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
[ 12.183614] hda_codec: ALC275: SKU not ready 0x411111f0
[ 12.185327] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 12.191927] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 12.192052] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 12.566304] EXT4-fs (dm-1): re-mounted. Opts: (null)
[ 12.643511] EXT4-fs (md126p1): mounted filesystem with ordered data mode. Opts: (null)
[ 12.648488] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 12.653905] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[ 13.068452] microcode: Microcode Update Driver: v2.00 removed.
[ 13.555587] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 13.562564] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 13.949455] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 13.956327] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 14.168382] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 15.523806] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.523810] Bluetooth: BNEP filters: protocol multicast
[ 15.523818] Bluetooth: BNEP socket layer initialized
[ 15.688868] Bluetooth: RFCOMM TTY layer initialized
[ 15.688943] Bluetooth: RFCOMM socket layer initialized
[ 15.688945] Bluetooth: RFCOMM ver 1.11
[ 15.827750] zram: module is from the staging directory, the quality is unknown, you have been warned.
[ 15.830871] zram: Created 4 device(s) ...
[ 15.842642] Adding 1572860k swap on /dev/zram0. Priority:10 extents:1 across:1572860k SSFS
[ 15.849798] Adding 1572860k swap on /dev/zram1. Priority:10 extents:1 across:1572860k SSFS
[ 15.856358] Adding 1572860k swap on /dev/zram2. Priority:10 extents:1 across:1572860k SSFS
[ 15.863648] Adding 1572860k swap on /dev/zram3. Priority:10 extents:1 across:1572860k SSFS
[ 17.429135] wlp2s0: authenticate with 08:60:6e:cc:a2:94
[ 17.436128] wlp2s0: send auth to 08:60:6e:cc:a2:94 (try 1/3)
[ 17.459580] wlp2s0: authenticated
[ 17.460389] wlp2s0: associate with 08:60:6e:cc:a2:94 (try 1/3)
[ 17.461239] wlp2s0: RX AssocResp from 08:60:6e:cc:a2:94 (capab=0x11 status=0 aid=1)
[ 17.464656] wlp2s0: associated
[ 17.465130] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 20.677380] fuse init (API version 7.22)
[ 21.219485] ata1.00: configured for UDMA/133
[ 21.219491] ata1: EH complete
[ 21.220655] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 21.229004] ata2.00: configured for UDMA/133
[ 21.229010] ata2: EH complete
[ 21.229243] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 21.656820] EXT4-fs (dm-1): re-mounted. Opts: commit=600
[ 21.662586] EXT4-fs (md126p1): re-mounted. Opts: commit=600
[ 21.664985] EXT4-fs (dm-2): re-mounted. Opts: commit=600
[ 21.695058] EXT4-fs (dm-3): re-mounted. Opts: commit=600
[ 34.448551] ata1.00: configured for UDMA/133
[ 34.448556] ata1: EH complete
[ 34.448730] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 34.452549] ata2.00: configured for UDMA/133
[ 34.452553] ata2: EH complete
[ 34.452761] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 34.477755] EXT4-fs (dm-1): re-mounted. Opts: commit=0
[ 34.483731] EXT4-fs (md126p1): re-mounted. Opts: commit=0
[ 34.485965] EXT4-fs (dm-2): re-mounted. Opts: commit=0
[ 34.495726] EXT4-fs (dm-3): re-mounted. Opts: commit=0
[ 35.739398] ACPI: \_SB_.DOCK: docking
[ 35.739687] acpiphp_glue: __handle_hotplug_event_func: Bus check notify on \_SB_.PCI0.RP07.LPMB
[ 35.739746] acpiphp_glue: bus exists... trim
[ 35.740308] ACPI: Device does not support D3cold
[ 35.740429] ACPI: Device does not support D3cold
[ 35.740663] ACPI: Device does not support D3cold
[ 35.740796] ACPI: Device does not support D3cold
[ 35.740928] ACPI: Device does not support D3cold
[ 35.741055] ACPI: Device does not support D3cold
[ 35.741211] ACPI: Device does not support D3cold
[ 35.741347] ACPI: Device does not support D3cold
[ 35.741507] ACPI: Device does not support D3cold
[ 35.741636] ACPI: Device does not support D3cold
[ 35.743587] ACPI: Device does not support D3cold
[ 35.745017] ACPI: Device does not support D3cold
[ 35.746897] ACPI: Device does not support D3cold
[ 35.747417] ACPI: Device does not support D3cold
[ 35.748184] ACPI: Device does not support D3cold
[ 35.748368] ACPI: Device does not support D3cold
[ 35.749044] ACPI: Device does not support D3cold
[ 35.749268] ACPI: Device does not support D3cold
[ 35.750138] ACPI: Device does not support D3cold
[ 35.750438] ACPI: Device does not support D3cold
[ 35.751098] ACPI: Device does not support D3cold
[ 35.751308] ACPI: Device does not support D3cold
[ 35.751356] ACPI: Device does not support D3cold
[ 35.751402] ACPI: Device does not support D3cold
[ 35.751450] ACPI: Device does not support D3cold
[ 35.751497] ACPI: Device does not support D3cold
[ 35.751542] ACPI: Device does not support D3cold
[ 35.751587] ACPI: Device does not support D3cold
[ 35.751632] ACPI: Device does not support D3cold
[ 35.751677] ACPI: Device does not support D3cold
[ 35.751724] ACPI: Device does not support D3cold
[ 35.759497] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 35.759554] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 35.759584] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 35.759615] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 35.759642] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 35.759667] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 35.759688] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 35.759929] pci 0000:08:00.0: [8086:151b] type 01 class 0x060400
[ 35.760108] pci 0000:08:00.0: supports D1 D2
[ 35.760110] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 35.762581] acpiphp_glue: found ACPI PCI Hotplug slot 1 at PCI 0000:0a:00
[ 35.763713] acpiphp: Slot [1-1] registered
[ 35.763767] acpiphp_glue: found ACPI PCI Hotplug slot 2 at PCI 0000:0a:03
[ 35.763800] acpiphp: Slot [2] registered
[ 35.763837] acpiphp_glue: found ACPI PCI Hotplug slot 3 at PCI 0000:0a:04
[ 35.764928] acpiphp: Slot [3] registered
[ 35.764978] pci 0000:0a:00.0: [8086:151b] type 01 class 0x060400
[ 35.765146] pci 0000:0a:00.0: supports D1 D2
[ 35.765148] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 35.766386] pci 0000:0a:03.0: [8086:151b] type 01 class 0x060400
[ 35.766550] pci 0000:0a:03.0: supports D1 D2
[ 35.766552] pci 0000:0a:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 35.766724] pci 0000:0a:04.0: [8086:151b] type 01 class 0x060400
[ 35.766900] pci 0000:0a:04.0: supports D1 D2
[ 35.766903] pci 0000:0a:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 35.767083] pci 0000:08:00.0: PCI bridge to [bus 0a-1d]
[ 35.767095] pci 0000:08:00.0: bridge window [io 0x3000-0x5fff]
[ 35.767101] pci 0000:08:00.0: bridge window [mem 0xb0000000-0xc03fffff]
[ 35.767110] pci 0000:08:00.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref]
[ 35.767234] pci 0000:0a:00.0: PCI bridge to [bus 0b]
[ 35.767248] pci 0000:0a:00.0: bridge window [mem 0xc0300000-0xc03fffff]
[ 35.767382] pci 0000:0a:03.0: PCI bridge to [bus 0c]
[ 35.767571] pci 0000:14:00.0: [8086:151b] type 01 class 0x060400
[ 35.767817] pci 0000:14:00.0: supports D1 D2
[ 35.767820] pci 0000:14:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 35.768047] pci 0000:0a:04.0: PCI bridge to [bus 14-1d]
[ 35.768059] pci 0000:0a:04.0: bridge window [io 0x3000-0x5fff]
[ 35.768066] pci 0000:0a:04.0: bridge window [mem 0xb0000000-0xc02fffff]
[ 35.768079] pci 0000:0a:04.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref]
[ 35.768338] pci 0000:15:03.0: [8086:151b] type 01 class 0x060400
[ 35.768593] pci 0000:15:03.0: supports D1 D2
[ 35.768597] pci 0000:15:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 35.768825] pci 0000:15:04.0: [8086:151b] type 01 class 0x060400
[ 35.769080] pci 0000:15:04.0: supports D1 D2
[ 35.769083] pci 0000:15:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 35.770374] pci 0000:14:00.0: PCI bridge to [bus 15-1d]
[ 35.770394] pci 0000:14:00.0: bridge window [io 0x3000-0x5fff]
[ 35.770404] pci 0000:14:00.0: bridge window [mem 0xb0000000-0xc02fffff]
[ 35.770422] pci 0000:14:00.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref]
[ 35.770802] acpiphp_glue: found ACPI PCI Hotplug slot 1 at PCI 0000:16:00
[ 35.772920] acpiphp: Slot [1-2] registered
[ 35.772951] acpiphp_glue: sibling found, but _SUN doesn't match!
[ 35.773010] pci 0000:16:00.0: [1002:6740] type 00 class 0x030000
[ 35.773078] pci 0000:16:00.0: reg 10: [mem 0x00000000-0x0fffffff 64bit pref]
[ 35.773128] pci 0000:16:00.0: reg 18: [mem 0x00000000-0x0001ffff 64bit]
[ 35.773159] pci 0000:16:00.0: reg 20: [io 0x0000-0x00ff]
[ 35.773223] pci 0000:16:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 35.773393] pci 0000:16:00.0: supports D1 D2
[ 35.775470] vgaarb: device added: PCI:0000:16:00.0,decodes=io+mem,owns=none,locks=none
[ 35.775475] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 35.775476] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:16:00.0
[ 35.775573] pci 0000:16:00.1: [1002:aa90] type 00 class 0x040300
[ 35.775640] pci 0000:16:00.1: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 35.775993] pci 0000:16:00.1: supports D1 D2
[ 35.778816] pci 0000:15:03.0: PCI bridge to [bus 16]
[ 35.778833] pci 0000:15:03.0: bridge window [io 0x5000-0x5fff]
[ 35.778842] pci 0000:15:03.0: bridge window [mem 0xc0200000-0xc02fffff]
[ 35.778857] pci 0000:15:03.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
[ 35.779408] pci 0000:17:00.0: [8086:151b] type 01 class 0x060400
[ 35.779754] pci 0000:17:00.0: supports D1 D2
[ 35.779757] pci 0000:17:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 35.780033] pci 0000:15:04.0: PCI bridge to [bus 17-1d]
[ 35.780048] pci 0000:15:04.0: bridge window [io 0x3000-0x4fff]
[ 35.780058] pci 0000:15:04.0: bridge window [mem 0xc0000000-0xc01fffff]
[ 35.780073] pci 0000:15:04.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref]
[ 35.780372] pci 0000:18:00.0: [8086:151b] type 01 class 0x060400
[ 35.780689] pci 0000:18:00.0: supports D1 D2
[ 35.780690] pci 0000:18:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 35.780904] pci 0000:18:01.0: [8086:151b] type 01 class 0x060400
[ 35.781217] pci 0000:18:01.0: supports D1 D2
[ 35.781218] pci 0000:18:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 35.781416] pci 0000:18:02.0: [8086:151b] type 01 class 0x060400
[ 35.781729] pci 0000:18:02.0: supports D1 D2
[ 35.781731] pci 0000:18:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 35.782716] pci 0000:18:03.0: [8086:151b] type 01 class 0x060400
[ 35.783070] pci 0000:18:03.0: supports D1 D2
[ 35.783073] pci 0000:18:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 35.783692] pci 0000:18:04.0: [8086:151b] type 01 class 0x060400
[ 35.784047] pci 0000:18:04.0: supports D1 D2
[ 35.784050] pci 0000:18:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 35.785705] pci 0000:17:00.0: PCI bridge to [bus 18-1d]
[ 35.785727] pci 0000:17:00.0: bridge window [io 0x3000-0x4fff]
[ 35.785737] pci 0000:17:00.0: bridge window [mem 0xc0000000-0xc01fffff]
[ 35.785759] pci 0000:17:00.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref]
[ 35.786864] acpiphp_glue: found ACPI PCI Hotplug slot 1 at PCI 0000:19:00
[ 35.786887] acpiphp: Slot [1-3] registered
[ 35.786971] pci 0000:19:00.0: [10ec:8168] type 00 class 0x020000
[ 35.787030] pci 0000:19:00.0: reg 10: [io 0x0000-0x00ff]
[ 35.787132] pci 0000:19:00.0: reg 18: [mem 0x00000000-0x00000fff 64bit pref]
[ 35.787194] pci 0000:19:00.0: reg 20: [mem 0x00000000-0x00003fff 64bit pref]
[ 35.787476] pci 0000:19:00.0: supports D1 D2
[ 35.787477] pci 0000:19:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 35.787739] pci 0000:18:00.0: PCI bridge to [bus 19]
[ 35.787759] pci 0000:18:00.0: bridge window [io 0x4000-0x4fff]
[ 35.787809] pci 0000:18:00.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref]
[ 35.788240] acpiphp_glue: found ACPI PCI Hotplug slot 1 at PCI 0000:1a:00
[ 35.788296] acpiphp: Slot [1-4] registered
[ 35.788391] pci 0000:1a:00.0: [11ab:6121] type 00 class 0x01018f
[ 35.788455] pci 0000:1a:00.0: reg 10: [io 0x8000-0x8007]
[ 35.788500] pci 0000:1a:00.0: reg 14: [io 0x8040-0x8043]
[ 35.788546] pci 0000:1a:00.0: reg 18: [io 0x8200-0x8207]
[ 35.788591] pci 0000:1a:00.0: reg 1c: [io 0x8800-0x8803]
[ 35.788636] pci 0000:1a:00.0: reg 20: [io 0x900000-0x90000f]
[ 35.788680] pci 0000:1a:00.0: reg 24: [mem 0x00800000-0x008003ff]
[ 35.788964] pci 0000:1a:00.0: supports D1
[ 35.788967] pci 0000:1a:00.0: PME# supported from D0 D1 D3hot
[ 35.789561] pci 0000:18:01.0: PCI bridge to [bus 1a]
[ 35.789583] pci 0000:18:01.0: bridge window [io 0x3000-0x3fff]
[ 35.789594] pci 0000:18:01.0: bridge window [mem 0xc0100000-0xc01fffff]
[ 35.789878] acpiphp_glue: found ACPI PCI Hotplug slot 1 at PCI 0000:1b:00
[ 35.789900] acpiphp: Slot [1-5] registered
[ 35.789993] pci 0000:1b:00.0: [1033:0194] type 00 class 0x0c0330
[ 35.790072] pci 0000:1b:00.0: reg 10: [mem 0x00000000-0x00001fff 64bit]
[ 35.790487] pci 0000:1b:00.0: PME# supported from D0 D3hot D3cold
[ 35.791943] pci 0000:18:02.0: PCI bridge to [bus 1b]
[ 35.791977] pci 0000:18:02.0: bridge window [mem 0xc0000000-0xc00fffff]
[ 35.792490] pci 0000:18:03.0: PCI bridge to [bus 1c]
[ 35.792900] pci 0000:18:04.0: PCI bridge to [bus 1d]
[ 35.793507] pci 0000:08:00.0: BAR 15: can't assign mem pref (size 0x28000000)
[ 35.793510] pci 0000:08:00.0: BAR 14: assigned [mem 0xb0000000-0xc06fffff]
[ 35.793512] pci 0000:08:00.0: BAR 13: can't assign io (size 0xb000)
[ 35.793517] pci 0000:0a:04.0: BAR 15: can't assign mem pref (size 0x20000000)
[ 35.793519] pci 0000:0a:00.0: BAR 14: assigned [mem 0xb0000000-0xb01fffff]
[ 35.793521] pci 0000:0a:00.0: BAR 15: assigned [mem 0xb0200000-0xb03fffff 64bit pref]
[ 35.793523] pci 0000:0a:03.0: BAR 14: assigned [mem 0xb0400000-0xb05fffff]
[ 35.793525] pci 0000:0a:03.0: BAR 15: assigned [mem 0xb0600000-0xb07fffff 64bit pref]
[ 35.793527] pci 0000:0a:04.0: BAR 14: can't assign mem (size 0x10300000)
[ 35.793528] pci 0000:0a:00.0: BAR 13: can't assign io (size 0x1000)
[ 35.793530] pci 0000:0a:03.0: BAR 13: can't assign io (size 0x1000)
[ 35.793532] pci 0000:0a:04.0: BAR 13: can't assign io (size 0x8000)
[ 35.793535] pci 0000:0a:00.0: PCI bridge to [bus 0b]
[ 35.793543] pci 0000:0a:00.0: bridge window [mem 0xb0000000-0xb01fffff]
[ 35.793549] pci 0000:0a:00.0: bridge window [mem 0xb0200000-0xb03fffff 64bit pref]
[ 35.793560] pci 0000:0a:03.0: PCI bridge to [bus 0c]
[ 35.793568] pci 0000:0a:03.0: bridge window [mem 0xb0400000-0xb05fffff]
[ 35.793573] pci 0000:0a:03.0: bridge window [mem 0xb0600000-0xb07fffff 64bit pref]
[ 35.793585] pci 0000:14:00.0: BAR 15: can't assign mem pref (size 0x20000000)
[ 35.793586] pci 0000:14:00.0: BAR 14: can't assign mem (size 0x10300000)
[ 35.793588] pci 0000:14:00.0: BAR 13: can't assign io (size 0x7000)
[ 35.793591] pci 0000:15:03.0: BAR 15: can't assign mem pref (size 0x18000000)
[ 35.793592] pci 0000:15:03.0: BAR 14: can't assign mem (size 0x200000)
[ 35.793594] pci 0000:15:04.0: BAR 14: can't assign mem (size 0xa00000)
[ 35.793596] pci 0000:15:04.0: BAR 15: can't assign mem pref (size 0xa00000)
[ 35.793597] pci 0000:15:03.0: BAR 13: can't assign io (size 0x1000)
[ 35.793599] pci 0000:15:04.0: BAR 13: can't assign io (size 0x6000)
[ 35.793602] pci 0000:16:00.0: BAR 0: can't assign mem pref (size 0x10000000)
[ 35.793604] pci 0000:16:00.0: BAR 2: can't assign mem (size 0x20000)
[ 35.793605] pci 0000:16:00.0: BAR 6: can't assign mem pref (size 0x20000)
[ 35.793607] pci 0000:16:00.1: BAR 0: can't assign mem (size 0x4000)
[ 35.793608] pci 0000:16:00.0: BAR 4: can't assign io (size 0x100)
[ 35.793611] pci 0000:15:03.0: PCI bridge to [bus 16]
[ 35.793643] pci 0000:17:00.0: BAR 14: can't assign mem (size 0xa00000)
[ 35.793644] pci 0000:17:00.0: BAR 15: can't assign mem pref (size 0xa00000)
[ 35.793646] pci 0000:17:00.0: BAR 13: can't assign io (size 0x5000)
[ 35.793651] pci 0000:18:00.0: BAR 14: can't assign mem (size 0x200000)
[ 35.793652] pci 0000:18:00.0: BAR 15: can't assign mem pref (size 0x200000)
[ 35.793654] pci 0000:18:01.0: BAR 14: can't assign mem (size 0x200000)
[ 35.793657] pci 0000:18:01.0: BAR 15: can't assign mem pref (size 0x200000)
[ 35.793659] pci 0000:18:02.0: BAR 14: can't assign mem (size 0x200000)
[ 35.793662] pci 0000:18:02.0: BAR 15: can't assign mem pref (size 0x200000)
[ 35.793665] pci 0000:18:03.0: BAR 14: can't assign mem (size 0x200000)
[ 35.793668] pci 0000:18:03.0: BAR 15: can't assign mem pref (size 0x200000)
[ 35.793671] pci 0000:18:04.0: BAR 14: can't assign mem (size 0x200000)
[ 35.793673] pci 0000:18:04.0: BAR 15: can't assign mem pref (size 0x200000)
[ 35.793676] pci 0000:18:00.0: BAR 13: can't assign io (size 0x1000)
[ 35.793679] pci 0000:18:01.0: BAR 13: can't assign io (size 0x1000)
[ 35.793682] pci 0000:18:02.0: BAR 13: can't assign io (size 0x1000)
[ 35.793685] pci 0000:18:03.0: BAR 13: can't assign io (size 0x1000)
[ 35.793687] pci 0000:18:04.0: BAR 13: can't assign io (size 0x1000)
[ 35.793695] pci 0000:19:00.0: BAR 4: can't assign mem pref (size 0x4000)
[ 35.793698] pci 0000:19:00.0: BAR 2: can't assign mem pref (size 0x1000)
[ 35.793701] pci 0000:19:00.0: BAR 0: can't assign io (size 0x100)
[ 35.793705] pci 0000:18:00.0: PCI bridge to [bus 19]
[ 35.793755] pci 0000:1a:00.0: BAR 5: can't assign mem (size 0x400)
[ 35.793758] pci 0000:1a:00.0: BAR 4: can't assign io (size 0x10)
[ 35.793761] pci 0000:1a:00.0: BAR 0: can't assign io (size 0x8)
[ 35.793764] pci 0000:1a:00.0: BAR 2: can't assign io (size 0x8)
[ 35.793767] pci 0000:1a:00.0: BAR 1: can't assign io (size 0x4)
[ 35.793769] pci 0000:1a:00.0: BAR 3: can't assign io (size 0x4)
[ 35.793774] pci 0000:18:01.0: PCI bridge to [bus 1a]
[ 35.793837] pci 0000:1b:00.0: BAR 0: can't assign mem (size 0x2000)
[ 35.793841] pci 0000:18:02.0: PCI bridge to [bus 1b]
[ 35.793890] pci 0000:18:03.0: PCI bridge to [bus 1c]
[ 35.793940] pci 0000:18:04.0: PCI bridge to [bus 1d]
[ 35.793987] pci 0000:17:00.0: PCI bridge to [bus 18-1d]
[ 35.794036] pci 0000:15:04.0: PCI bridge to [bus 17-1d]
[ 35.794071] pci 0000:14:00.0: PCI bridge to [bus 15-1d]
[ 35.794106] pci 0000:0a:04.0: PCI bridge to [bus 14-1d]
[ 35.794131] pci 0000:08:00.0: PCI bridge to [bus 0a-1d]
[ 35.794140] pci 0000:08:00.0: bridge window [mem 0xb0000000-0xc06fffff]
[ 35.794172] pci 0000:08:00.0: no hotplug settings from platform
[ 35.794189] pci 0000:0a:00.0: no hotplug settings from platform
[ 35.794206] pci 0000:0a:03.0: no hotplug settings from platform
[ 35.794223] pci 0000:0a:04.0: no hotplug settings from platform
[ 35.794244] pci 0000:14:00.0: no hotplug settings from platform
[ 35.794270] pci 0000:15:03.0: no hotplug settings from platform
[ 35.794301] pci 0000:16:00.0: no hotplug settings from platform
[ 35.794331] pci 0000:16:00.1: no hotplug settings from platform
[ 35.794357] pci 0000:15:04.0: no hotplug settings from platform
[ 35.794386] pci 0000:17:00.0: no hotplug settings from platform
[ 35.794421] pci 0000:18:00.0: no hotplug settings from platform
[ 35.794459] pci 0000:19:00.0: no hotplug settings from platform
[ 35.794493] pci 0000:18:01.0: no hotplug settings from platform
[ 35.794532] pci 0000:1a:00.0: no hotplug settings from platform
[ 35.794565] pci 0000:18:02.0: no hotplug settings from platform
[ 35.794605] pci 0000:1b:00.0: no hotplug settings from platform
[ 35.794639] pci 0000:18:03.0: no hotplug settings from platform
[ 35.794674] pci 0000:18:04.0: no hotplug settings from platform
[ 35.795907] pcieport 0000:08:00.0: irq 52 for MSI/MSI-X
[ 35.797083] pcieport 0000:0a:00.0: irq 53 for MSI/MSI-X
[ 35.797339] pcieport 0000:0a:03.0: irq 54 for MSI/MSI-X
[ 35.798554] pcieport 0000:0a:04.0: irq 55 for MSI/MSI-X
[ 35.799012] pcieport 0000:14:00.0: irq 56 for MSI/MSI-X
[ 35.800534] pcieport 0000:15:03.0: irq 57 for MSI/MSI-X
[ 35.801220] pcieport 0000:15:04.0: irq 58 for MSI/MSI-X
[ 35.802764] hda-intel 0000:16:00.1: Handle VGA-switcheroo audio client
[ 35.802787] ------------[ cut here ]------------
[ 35.802792] WARNING: at drivers/pci/pci.c:130 pci_ioremap_bar+0x69/0x70()
[ 35.802793] Modules linked in: fuse zram(C) rfcomm bnep snd_hda_codec_hdmi snd_hda_codec_realtek rtsx_pci_ms rtsx_pci_sdmmc memstick mmc_core iTCO_wdt iTCO_vendor_support arc4 uvcvideo iwldvm videobuf2_vmalloc videobuf2_memops mac80211 qcserial videobuf2_core usb_wwan videodev media usbserial btusb bluetooth iwlwifi coretemp kvm_intel kvm sony_laptop cfg80211 snd_hda_intel snd_hda_codec rfkill i915 pcspkr r8169 joydev mii rtsx_pci snd_hwdep intel_agp snd_pcm intel_gtt i2c_algo_bit snd_page_alloc drm_kms_helper snd_timer drm lpc_ich snd agpgart i2c_i801 mfd_core sha256_ssse3 sha256_generic dm_crypt raid0 md_mod crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 glue_helper lrw gf128mul ablk_helper cryptd xhci_hcd ehci_pci ehci_hcd dm_mirror dm_region_hash dm_log dm_mod [last unloaded: microcode]

[ 35.802872] CPU: 0 PID: 530 Comm: kworker/0:2 Tainted: G C 3.10.0-rc4 #7
[ 35.802874] Hardware name: Sony Corporation VPCZ23A4R/VAIO, BIOS R1013H5 05/21/2012
[ 35.802877] Workqueue: kacpi_hotplug acpi_os_execute_deferred
[ 35.802879] ffffffff81a2a114 ffff8802527d37b8 ffffffff8165aab8 ffff8802527d37f8
[ 35.802882] ffffffff8103c8cb ffff8802527d37d8 ffff88022eaf4800 ffff88022eac6000
[ 35.802885] 0000000000000000 ffff88022eaf4000 0000000000000001 ffff8802527d3808
[ 35.802888] Call Trace:
[ 35.802892] [<ffffffff8165aab8>] dump_stack+0x19/0x1b
[ 35.802896] [<ffffffff8103c8cb>] warn_slowpath_common+0x6b/0xa0
[ 35.802898] [<ffffffff8103c915>] warn_slowpath_null+0x15/0x20
[ 35.802901] [<ffffffff813831e9>] pci_ioremap_bar+0x69/0x70
[ 35.802905] [<ffffffffa0388bd6>] azx_first_init+0x56/0x600 [snd_hda_intel]
[ 35.802908] [<ffffffff813868ef>] ? pci_get_domain_bus_and_slot+0x2f/0x70
[ 35.802911] [<ffffffffa038ad25>] azx_probe+0x555/0x940 [snd_hda_intel]
[ 35.802915] [<ffffffff810a1a1d>] ? trace_hardirqs_on+0xd/0x10
[ 35.802917] [<ffffffff81384f66>] local_pci_probe+0x46/0x80
[ 35.802920] [<ffffffff813857d9>] pci_device_probe+0xf9/0x120
[ 35.802924] [<ffffffff8143c2c6>] driver_probe_device+0x76/0x220
[ 35.802927] [<ffffffff8143c56b>] __device_attach+0x4b/0x60
[ 35.802929] [<ffffffff8143c520>] ? __driver_attach+0xb0/0xb0
[ 35.802932] [<ffffffff8143a61c>] bus_for_each_drv+0x5c/0x90
[ 35.802934] [<ffffffff8143c218>] device_attach+0x98/0xb0
[ 35.802937] [<ffffffff8137d8d4>] pci_bus_add_device+0x34/0x60
[ 35.802939] [<ffffffff8137d939>] pci_bus_add_devices+0x39/0xa0
[ 35.802942] [<ffffffff8137d987>] pci_bus_add_devices+0x87/0xa0
[ 35.802944] [<ffffffff8137d987>] pci_bus_add_devices+0x87/0xa0
[ 35.802946] [<ffffffff8137d987>] pci_bus_add_devices+0x87/0xa0
[ 35.802948] [<ffffffff8137d987>] pci_bus_add_devices+0x87/0xa0
[ 35.802951] [<ffffffff816446b0>] enable_device+0x370/0x450
[ 35.802954] [<ffffffff813a0f3a>] acpiphp_enable_slot+0xca/0x140
[ 35.802957] [<ffffffff813a13b6>] __handle_hotplug_event_func+0x96/0x1a0
[ 35.802959] [<ffffffff813c729b>] hotplug_dock_devices+0x57/0xda
[ 35.802962] [<ffffffff813c7ae0>] acpi_dock_deferred_cb+0xd4/0x1c8
[ 35.802964] [<ffffffff813bfba9>] acpi_os_execute_deferred+0x20/0x2d
[ 35.802968] [<ffffffff8105c212>] process_one_work+0x1c2/0x560
[ 35.802970] [<ffffffff8105c1a7>] ? process_one_work+0x157/0x560
[ 35.802972] [<ffffffff8105d126>] worker_thread+0x116/0x370
[ 35.802974] [<ffffffff810a1a1d>] ? trace_hardirqs_on+0xd/0x10
[ 35.802977] [<ffffffff8105d010>] ? manage_workers.isra.20+0x2d0/0x2d0
[ 35.802980] [<ffffffff81063986>] kthread+0xd6/0xe0
[ 35.802982] [<ffffffff81660ccb>] ? _raw_spin_unlock_irq+0x2b/0x60
[ 35.802985] [<ffffffff810638b0>] ? __init_kthread_worker+0x70/0x70
[ 35.802988] [<ffffffff8166806c>] ret_from_fork+0x7c/0xb0
[ 35.802991] [<ffffffff810638b0>] ? __init_kthread_worker+0x70/0x70
[ 35.802992] ---[ end trace f366acc9dc87b388 ]---
[ 35.802994] hda-intel 0000:16:00.1: ioremap error
[ 35.803314] pcieport 0000:17:00.0: irq 59 for MSI/MSI-X
[ 35.804643] pcieport 0000:18:00.0: irq 60 for MSI/MSI-X
[ 35.806478] pcieport 0000:18:01.0: irq 61 for MSI/MSI-X
[ 35.807376] pcieport 0000:18:02.0: irq 62 for MSI/MSI-X
[ 35.808150] pcieport 0000:18:03.0: irq 63 for MSI/MSI-X
[ 35.808759] pcieport 0000:18:04.0: irq 64 for MSI/MSI-X
[ 35.809570] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 35.809699] r8169 0000:19:00.0 (unregistered net_device): region #2 not an MMIO resource, aborting
[ 35.810960] xhci_hcd 0000:1b:00.0: init 0000:1b:00.0 fail, -16
[ 35.811002] xhci_hcd: probe of 0000:1b:00.0 failed with error -16
[ 35.811014] acpiphp_glue: __handle_hotplug_event_func: Bus check notify on \_SB_.PCI0.RP07.LPMB.LPM0
[ 35.811020] acpiphp_glue: __handle_hotplug_event_func: Bus check notify on \_SB_.PCI0.RP07.LPMB.LPM1
[ 35.811025] acpiphp_glue: __handle_hotplug_event_func: Bus check notify on \_SB_.PCI0.RP07.LPMB.LPM2
[ 35.811029] acpiphp_glue: __handle_hotplug_event_func: Bus check notify on \_SB_.PCI0.RP07.LPMB.LPM2.LPRI.LPR0.GFXA
[ 35.811045] acpiphp_glue: __handle_hotplug_event_func: Bus check notify on \_SB_.PCI0.RP07.LPMB.LPM2.LPRI.LPR0.GHDA
[ 35.811057] acpiphp_glue: __handle_hotplug_event_func: Bus check notify on \_SB_.PCI0.RP07.LPMB.LPM2.LPRI.LPR1.LPCI.LPC0.DLAN
[ 35.811064] acpiphp_glue: __handle_hotplug_event_func: Bus check notify on \_SB_.PCI0.RP07.LPMB.LPM2.LPRI.LPR1.LPCI.LPC1.DODD
[ 35.811072] acpiphp_glue: __handle_hotplug_event_func: Bus check notify on \_SB_.PCI0.RP07.LPMB.LPM2.LPRI.LPR1.LPCI.LPC2.DUSB
[ 35.811520] pata_marvell 0000:1a:00.0: no available native port
[ 35.812629] pata_acpi 0000:1a:00.0: no available native port
[ 91.805364] acpiphp_glue: __handle_hotplug_event_func: Device eject notify on \_SB_.PCI0.RP07.LPMB
[ 91.817160] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=none,decodes=io+mem:owns=none
[ 91.822458] pci_bus 0000:0b: busn_res: [bus 0b] is released
[ 91.823317] pci_bus 0000:0c: busn_res: [bus 0c] is released
[ 91.823430] pci_bus 0000:16: busn_res: [bus 16] is released
[ 91.834349] acpiphp: Slot [1-2] unregistered
[ 91.834568] acpiphp: release_slot - physical_slot = 1-2
[ 91.835003] pci_bus 0000:19: busn_res: [bus 19] is released
[ 91.840333] acpiphp: Slot [1-3] unregistered
[ 91.840353] acpiphp: release_slot - physical_slot = 1-3
[ 91.840504] pci_bus 0000:1a: busn_res: [bus 1a] is released
[ 91.846386] acpiphp: Slot [1-4] unregistered
[ 91.846405] acpiphp: release_slot - physical_slot = 1-4
[ 91.846576] pci_bus 0000:1b: busn_res: [bus 1b] is released
[ 91.853365] acpiphp: Slot [1-5] unregistered
[ 91.853394] acpiphp: release_slot - physical_slot = 1-5
[ 91.853604] pci_bus 0000:1c: busn_res: [bus 1c] is released
[ 91.853713] pci_bus 0000:1d: busn_res: [bus 1d] is released
[ 91.854017] pci_bus 0000:18: busn_res: [bus 18-1d] is released
[ 91.854184] pci_bus 0000:17: busn_res: [bus 17-1d] is released
[ 91.854313] pci_bus 0000:15: busn_res: [bus 15-1d] is released
[ 91.854409] pci_bus 0000:14: busn_res: [bus 14-1d] is released
[ 91.854505] pci_bus 0000:0a: busn_res: [bus 0a-1d] is released
[ 91.861366] acpiphp: Slot [1-1] unregistered
[ 91.861384] acpiphp: release_slot - physical_slot = 1-1
[ 91.866371] acpiphp: Slot [2] unregistered
[ 91.866400] acpiphp: release_slot - physical_slot = 2
[ 91.871379] acpiphp: Slot [3] unregistered
[ 91.871413] acpiphp: release_slot - physical_slot = 3
[ 91.872177] ACPI: Device does not support D3cold
[ 91.872426] ACPI: Device does not support D3cold
[ 91.872834] ACPI: Device does not support D3cold
[ 91.873425] ACPI: Device does not support D3cold
[ 91.873733] ACPI: Device does not support D3cold
[ 91.875812] ACPI: Device does not support D3cold
[ 91.877376] ACPI: Device does not support D3cold
[ 91.877611] ACPI: Device does not support D3cold
[ 91.880147] ACPI: Device does not support D3cold
[ 91.880835] ACPI: Device does not support D3cold
[ 91.881103] ACPI: Device does not support D3cold
[ 91.881682] ACPI: Device does not support D3cold
[ 91.882233] ACPI: Device does not support D3cold
[ 91.882968] ACPI: Device does not support D3cold
[ 91.883196] ACPI: Device does not support D3cold
[ 91.883415] ACPI: Device does not support D3cold
[ 91.883716] ACPI: Device does not support D3cold
[ 91.884566] ACPI: Device does not support D3cold
[ 91.885331] ACPI: Device does not support D3cold
[ 91.886073] ACPI: Device does not support D3cold
[ 91.887309] ACPI: Device does not support D3cold
[ 91.888008] ACPI: Device does not support D3cold
[ 91.888125] ACPI: Device does not support D3cold
[ 91.888876] ACPI: Device does not support D3cold
[ 91.889376] ACPI: Device does not support D3cold
[ 91.889713] ACPI: Device does not support D3cold
[ 91.890622] ACPI: Device does not support D3cold
[ 91.890922] ACPI: Device does not support D3cold
[ 91.891115] ACPI: Device does not support D3cold
[ 91.891345] ACPI: Device does not support D3cold
[ 91.891695] ACPI: Device does not support D3cold
[ 91.892177] ACPI: Device does not support D3cold
[ 91.892189] ACPI: \_SB_.DOCK: undocking
[ 92.367748] ACPI: \_SB_.DOCK: docking
[ 92.367912] ACPI: \_SB_.DOCK: Unable to dock!
[ 92.368128] acpiphp_glue: _handle_hotplug_event_bridge: Bus check notify on \_SB_.PCI0.RP07
[ 92.368130] acpiphp_glue: _handle_hotplug_event_bridge: re-enumerating slots under \_SB_.PCI0.RP07
[ 92.368147] acpiphp_glue: acpiphp_check_bridge: 0 enabled, 0 disabled
[ 97.060120] ata1.00: configured for UDMA/133
[ 97.060125] ata1: EH complete
[ 97.060385] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 97.064345] ata2.00: configured for UDMA/133
[ 97.064349] ata2: EH complete
[ 97.064529] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 97.147658] EXT4-fs (dm-1): re-mounted. Opts: commit=600
[ 97.153032] EXT4-fs (md126p1): re-mounted. Opts: commit=600
[ 97.156152] EXT4-fs (dm-2): re-mounted. Opts: commit=600
[ 97.183929] EXT4-fs (dm-3): re-mounted. Opts: commit=600
[ 115.952865] ata1.00: configured for UDMA/133
[ 115.952870] ata1: EH complete
[ 115.953032] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 115.956838] ata2.00: configured for UDMA/133
[ 115.956859] ata2: EH complete
[ 115.957047] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 115.971401] EXT4-fs (dm-1): re-mounted. Opts: commit=0
[ 115.975849] EXT4-fs (md126p1): re-mounted. Opts: commit=0
[ 115.978380] EXT4-fs (dm-2): re-mounted. Opts: commit=0
[ 115.980766] EXT4-fs (dm-3): re-mounted. Opts: commit=0
[ 117.231056] acpiphp_glue: _handle_hotplug_event_bridge: Device check notify on \_SB_.PCI0.RP07
[ 117.250613] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 117.250637] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 117.250681] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 117.251264] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 117.251321] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 117.251346] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 117.251394] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 117.251658] pci 0000:08:00.0: [8086:151b] type 01 class 0x060400
[ 117.251859] pci 0000:08:00.0: supports D1 D2
[ 117.251862] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 117.253572] acpiphp_glue: found ACPI PCI Hotplug slot 1 at PCI 0000:0a:00
[ 117.253850] acpiphp: Slot [1-1] registered
[ 117.253876] acpiphp_glue: found ACPI PCI Hotplug slot 2 at PCI 0000:0a:03
[ 117.253920] acpiphp: Slot [2] registered
[ 117.253953] acpiphp_glue: found ACPI PCI Hotplug slot 3 at PCI 0000:0a:04
[ 117.254194] acpiphp: Slot [3] registered
[ 117.254245] pci 0000:0a:00.0: [8086:151b] type 01 class 0x060400
[ 117.254411] pci 0000:0a:00.0: supports D1 D2
[ 117.254413] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 117.256037] pci 0000:0a:03.0: [8086:151b] type 01 class 0x060400
[ 117.256200] pci 0000:0a:03.0: supports D1 D2
[ 117.256202] pci 0000:0a:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 117.257770] pci 0000:0a:04.0: [8086:151b] type 01 class 0x060400
[ 117.257932] pci 0000:0a:04.0: supports D1 D2
[ 117.257934] pci 0000:0a:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 117.258124] pci 0000:08:00.0: PCI bridge to [bus 0a-1d]
[ 117.258137] pci 0000:08:00.0: bridge window [io 0x3000-0x5fff]
[ 117.258145] pci 0000:08:00.0: bridge window [mem 0xb0000000-0xc03fffff]
[ 117.258158] pci 0000:08:00.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref]
[ 117.258291] pci 0000:0a:00.0: PCI bridge to [bus 0b]
[ 117.258306] pci 0000:0a:00.0: bridge window [mem 0xc0300000-0xc03fffff]
[ 117.258439] pci 0000:0a:03.0: PCI bridge to [bus 0c]
[ 117.258630] pci 0000:14:00.0: [8086:151b] type 01 class 0x060400
[ 117.258898] pci 0000:14:00.0: supports D1 D2
[ 117.258900] pci 0000:14:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 117.260764] pci 0000:0a:04.0: PCI bridge to [bus 14-1d]
[ 117.260778] pci 0000:0a:04.0: bridge window [io 0x3000-0x5fff]
[ 117.260787] pci 0000:0a:04.0: bridge window [mem 0xb0000000-0xc02fffff]
[ 117.260799] pci 0000:0a:04.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref]
[ 117.261085] pci 0000:15:03.0: [8086:151b] type 01 class 0x060400
[ 117.261337] pci 0000:15:03.0: supports D1 D2
[ 117.261340] pci 0000:15:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 117.262226] pci 0000:15:04.0: [8086:151b] type 01 class 0x060400
[ 117.262477] pci 0000:15:04.0: supports D1 D2
[ 117.262480] pci 0000:15:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 117.262799] pci 0000:14:00.0: PCI bridge to [bus 15-1d]
[ 117.262815] pci 0000:14:00.0: bridge window [io 0x3000-0x5fff]
[ 117.262823] pci 0000:14:00.0: bridge window [mem 0xb0000000-0xc02fffff]
[ 117.262837] pci 0000:14:00.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref]
[ 117.263089] acpiphp_glue: found ACPI PCI Hotplug slot 1 at PCI 0000:16:00
[ 117.263111] acpiphp: Slot [1-2] registered
[ 117.263136] acpiphp_glue: sibling found, but _SUN doesn't match!
[ 117.263194] pci 0000:16:00.0: [1002:6740] type 00 class 0x030000
[ 117.263261] pci 0000:16:00.0: reg 10: [mem 0x00000000-0x0fffffff 64bit pref]
[ 117.263309] pci 0000:16:00.0: reg 18: [mem 0x00000000-0x0001ffff 64bit]
[ 117.263340] pci 0000:16:00.0: reg 20: [io 0x0000-0x00ff]
[ 117.263404] pci 0000:16:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 117.263572] pci 0000:16:00.0: supports D1 D2
[ 117.263919] vgaarb: device added: PCI:0000:16:00.0,decodes=io+mem,owns=none,locks=none
[ 117.263925] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
[ 117.264003] pci 0000:16:00.1: [1002:aa90] type 00 class 0x040300
[ 117.264072] pci 0000:16:00.1: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 117.264403] pci 0000:16:00.1: supports D1 D2
[ 117.265273] pci 0000:15:03.0: PCI bridge to [bus 16]
[ 117.265289] pci 0000:15:03.0: bridge window [io 0x5000-0x5fff]
[ 117.265297] pci 0000:15:03.0: bridge window [mem 0xc0200000-0xc02fffff]
[ 117.265313] pci 0000:15:03.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
[ 117.266482] pci 0000:17:00.0: [8086:151b] type 01 class 0x060400
[ 117.266821] pci 0000:17:00.0: supports D1 D2
[ 117.266823] pci 0000:17:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 117.268223] pci 0000:15:04.0: PCI bridge to [bus 17-1d]
[ 117.268242] pci 0000:15:04.0: bridge window [io 0x3000-0x4fff]
[ 117.268253] pci 0000:15:04.0: bridge window [mem 0xc0000000-0xc01fffff]
[ 117.268270] pci 0000:15:04.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref]
[ 117.268655] pci 0000:18:00.0: [8086:151b] type 01 class 0x060400
[ 117.269047] pci 0000:18:00.0: supports D1 D2
[ 117.269050] pci 0000:18:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 117.270003] pci 0000:18:01.0: [8086:151b] type 01 class 0x060400
[ 117.270348] pci 0000:18:01.0: supports D1 D2
[ 117.270351] pci 0000:18:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 117.270732] pci 0000:18:02.0: [8086:151b] type 01 class 0x060400
[ 117.271089] pci 0000:18:02.0: supports D1 D2
[ 117.271092] pci 0000:18:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 117.271357] pci 0000:18:03.0: [8086:151b] type 01 class 0x060400
[ 117.271678] pci 0000:18:03.0: supports D1 D2
[ 117.271680] pci 0000:18:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 117.272335] pci 0000:18:04.0: [8086:151b] type 01 class 0x060400
[ 117.272645] pci 0000:18:04.0: supports D1 D2
[ 117.272647] pci 0000:18:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 117.273128] pci 0000:17:00.0: PCI bridge to [bus 18-1d]
[ 117.273151] pci 0000:17:00.0: bridge window [io 0x3000-0x4fff]
[ 117.273164] pci 0000:17:00.0: bridge window [mem 0xc0000000-0xc01fffff]
[ 117.273187] pci 0000:17:00.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref]
[ 117.273662] acpiphp_glue: found ACPI PCI Hotplug slot 1 at PCI 0000:19:00
[ 117.273685] acpiphp: Slot [1-3] registered
[ 117.273779] pci 0000:19:00.0: [10ec:8168] type 00 class 0x020000
[ 117.273838] pci 0000:19:00.0: reg 10: [io 0x0000-0x00ff]
[ 117.273948] pci 0000:19:00.0: reg 18: [mem 0x00000000-0x00000fff 64bit pref]
[ 117.274017] pci 0000:19:00.0: reg 20: [mem 0x00000000-0x00003fff 64bit pref]
[ 117.274322] pci 0000:19:00.0: supports D1 D2
[ 117.274325] pci 0000:19:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 117.274629] pci 0000:18:00.0: PCI bridge to [bus 19]
[ 117.274650] pci 0000:18:00.0: bridge window [io 0x4000-0x4fff]
[ 117.274679] pci 0000:18:00.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref]
[ 117.276197] acpiphp_glue: found ACPI PCI Hotplug slot 1 at PCI 0000:1a:00
[ 117.276431] acpiphp: Slot [1-4] registered
[ 117.276515] pci 0000:1a:00.0: [11ab:6121] type 00 class 0x01018f
[ 117.276573] pci 0000:1a:00.0: reg 10: [io 0x8000-0x8007]
[ 117.276612] pci 0000:1a:00.0: reg 14: [io 0x8040-0x8043]
[ 117.276652] pci 0000:1a:00.0: reg 18: [io 0x8200-0x8207]
[ 117.276692] pci 0000:1a:00.0: reg 1c: [io 0x8800-0x8803]
[ 117.276731] pci 0000:1a:00.0: reg 20: [io 0x900000-0x90000f]
[ 117.276845] pci 0000:1a:00.0: reg 24: [mem 0x00800000-0x008003ff]
[ 117.277113] pci 0000:1a:00.0: supports D1
[ 117.277116] pci 0000:1a:00.0: PME# supported from D0 D1 D3hot
[ 117.277505] pci 0000:18:01.0: PCI bridge to [bus 1a]
[ 117.277529] pci 0000:18:01.0: bridge window [io 0x3000-0x3fff]
[ 117.277543] pci 0000:18:01.0: bridge window [mem 0xc0100000-0xc01fffff]
[ 117.278558] acpiphp_glue: found ACPI PCI Hotplug slot 1 at PCI 0000:1b:00
[ 117.278615] acpiphp: Slot [1-5] registered
[ 117.278717] pci 0000:1b:00.0: [1033:0194] type 00 class 0x0c0330
[ 117.278810] pci 0000:1b:00.0: reg 10: [mem 0x00000000-0x00001fff 64bit]
[ 117.279247] pci 0000:1b:00.0: PME# supported from D0 D3hot D3cold
[ 117.280019] pci 0000:18:02.0: PCI bridge to [bus 1b]
[ 117.280053] pci 0000:18:02.0: bridge window [mem 0xc0000000-0xc00fffff]
[ 117.280377] pci 0000:18:03.0: PCI bridge to [bus 1c]
[ 117.280714] pci 0000:18:04.0: PCI bridge to [bus 1d]
[ 117.281322] pci 0000:08:00.0: BAR 15: can't assign mem pref (size 0x28000000)
[ 117.281324] pci 0000:08:00.0: BAR 14: assigned [mem 0xb0000000-0xc06fffff]
[ 117.281327] pci 0000:08:00.0: BAR 13: can't assign io (size 0xb000)
[ 117.281331] pci 0000:0a:04.0: BAR 15: can't assign mem pref (size 0x20000000)
[ 117.281333] pci 0000:0a:00.0: BAR 14: assigned [mem 0xb0000000-0xb01fffff]
[ 117.281335] pci 0000:0a:00.0: BAR 15: assigned [mem 0xb0200000-0xb03fffff 64bit pref]
[ 117.281337] pci 0000:0a:03.0: BAR 14: assigned [mem 0xb0400000-0xb05fffff]
[ 117.281339] pci 0000:0a:03.0: BAR 15: assigned [mem 0xb0600000-0xb07fffff 64bit pref]
[ 117.281341] pci 0000:0a:04.0: BAR 14: can't assign mem (size 0x10300000)
[ 117.281343] pci 0000:0a:00.0: BAR 13: can't assign io (size 0x1000)
[ 117.281344] pci 0000:0a:03.0: BAR 13: can't assign io (size 0x1000)
[ 117.281346] pci 0000:0a:04.0: BAR 13: can't assign io (size 0x8000)
[ 117.281349] pci 0000:0a:00.0: PCI bridge to [bus 0b]
[ 117.281356] pci 0000:0a:00.0: bridge window [mem 0xb0000000-0xb01fffff]
[ 117.281363] pci 0000:0a:00.0: bridge window [mem 0xb0200000-0xb03fffff 64bit pref]
[ 117.281372] pci 0000:0a:03.0: PCI bridge to [bus 0c]
[ 117.281379] pci 0000:0a:03.0: bridge window [mem 0xb0400000-0xb05fffff]
[ 117.281385] pci 0000:0a:03.0: bridge window [mem 0xb0600000-0xb07fffff 64bit pref]
[ 117.281395] pci 0000:14:00.0: BAR 15: can't assign mem pref (size 0x20000000)
[ 117.281397] pci 0000:14:00.0: BAR 14: can't assign mem (size 0x10300000)
[ 117.281398] pci 0000:14:00.0: BAR 13: can't assign io (size 0x7000)
[ 117.281401] pci 0000:15:03.0: BAR 15: can't assign mem pref (size 0x18000000)
[ 117.281403] pci 0000:15:03.0: BAR 14: can't assign mem (size 0x200000)
[ 117.281404] pci 0000:15:04.0: BAR 14: can't assign mem (size 0xa00000)
[ 117.281406] pci 0000:15:04.0: BAR 15: can't assign mem pref (size 0xa00000)
[ 117.281407] pci 0000:15:03.0: BAR 13: can't assign io (size 0x1000)
[ 117.281409] pci 0000:15:04.0: BAR 13: can't assign io (size 0x6000)
[ 117.281412] pci 0000:16:00.0: BAR 0: can't assign mem pref (size 0x10000000)
[ 117.281414] pci 0000:16:00.0: BAR 2: can't assign mem (size 0x20000)
[ 117.281415] pci 0000:16:00.0: BAR 6: can't assign mem pref (size 0x20000)
[ 117.281417] pci 0000:16:00.1: BAR 0: can't assign mem (size 0x4000)
[ 117.281419] pci 0000:16:00.0: BAR 4: can't assign io (size 0x100)
[ 117.281421] pci 0000:15:03.0: PCI bridge to [bus 16]
[ 117.281453] pci 0000:17:00.0: BAR 14: can't assign mem (size 0xa00000)
[ 117.281455] pci 0000:17:00.0: BAR 15: can't assign mem pref (size 0xa00000)
[ 117.281457] pci 0000:17:00.0: BAR 13: can't assign io (size 0x5000)
[ 117.281461] pci 0000:18:00.0: BAR 14: can't assign mem (size 0x200000)
[ 117.281462] pci 0000:18:00.0: BAR 15: can't assign mem pref (size 0x200000)
[ 117.281464] pci 0000:18:01.0: BAR 14: can't assign mem (size 0x200000)
[ 117.281466] pci 0000:18:01.0: BAR 15: can't assign mem pref (size 0x200000)
[ 117.281467] pci 0000:18:02.0: BAR 14: can't assign mem (size 0x200000)
[ 117.281469] pci 0000:18:02.0: BAR 15: can't assign mem pref (size 0x200000)
[ 117.281470] pci 0000:18:03.0: BAR 14: can't assign mem (size 0x200000)
[ 117.281472] pci 0000:18:03.0: BAR 15: can't assign mem pref (size 0x200000)
[ 117.281473] pci 0000:18:04.0: BAR 14: can't assign mem (size 0x200000)
[ 117.281475] pci 0000:18:04.0: BAR 15: can't assign mem pref (size 0x200000)
[ 117.281476] pci 0000:18:00.0: BAR 13: can't assign io (size 0x1000)
[ 117.281478] pci 0000:18:01.0: BAR 13: can't assign io (size 0x1000)
[ 117.281479] pci 0000:18:02.0: BAR 13: can't assign io (size 0x1000)
[ 117.281481] pci 0000:18:03.0: BAR 13: can't assign io (size 0x1000)
[ 117.281483] pci 0000:18:04.0: BAR 13: can't assign io (size 0x1000)
[ 117.281487] pci 0000:19:00.0: BAR 4: can't assign mem pref (size 0x4000)
[ 117.281488] pci 0000:19:00.0: BAR 2: can't assign mem pref (size 0x1000)
[ 117.281490] pci 0000:19:00.0: BAR 0: can't assign io (size 0x100)
[ 117.281492] pci 0000:18:00.0: PCI bridge to [bus 19]
[ 117.281536] pci 0000:1a:00.0: BAR 5: can't assign mem (size 0x400)
[ 117.281537] pci 0000:1a:00.0: BAR 4: can't assign io (size 0x10)
[ 117.281539] pci 0000:1a:00.0: BAR 0: can't assign io (size 0x8)
[ 117.281540] pci 0000:1a:00.0: BAR 2: can't assign io (size 0x8)
[ 117.281542] pci 0000:1a:00.0: BAR 1: can't assign io (size 0x4)
[ 117.281543] pci 0000:1a:00.0: BAR 3: can't assign io (size 0x4)
[ 117.281545] pci 0000:18:01.0: PCI bridge to [bus 1a]
[ 117.281588] pci 0000:1b:00.0: BAR 0: can't assign mem (size 0x2000)
[ 117.281590] pci 0000:18:02.0: PCI bridge to [bus 1b]
[ 117.281632] pci 0000:18:03.0: PCI bridge to [bus 1c]
[ 117.281674] pci 0000:18:04.0: PCI bridge to [bus 1d]
[ 117.281717] pci 0000:17:00.0: PCI bridge to [bus 18-1d]
[ 117.281776] pci 0000:15:04.0: PCI bridge to [bus 17-1d]
[ 117.281808] pci 0000:14:00.0: PCI bridge to [bus 15-1d]
[ 117.281841] pci 0000:0a:04.0: PCI bridge to [bus 14-1d]
[ 117.281863] pci 0000:08:00.0: PCI bridge to [bus 0a-1d]
[ 117.281872] pci 0000:08:00.0: bridge window [mem 0xb0000000-0xc06fffff]
[ 117.281894] pci 0000:08:00.0: no hotplug settings from platform
[ 117.281904] pci 0000:0a:00.0: no hotplug settings from platform
[ 117.281913] pci 0000:0a:03.0: no hotplug settings from platform
[ 117.281922] pci 0000:0a:04.0: no hotplug settings from platform
[ 117.281934] pci 0000:14:00.0: no hotplug settings from platform
[ 117.281949] pci 0000:15:03.0: no hotplug settings from platform
[ 117.281966] pci 0000:16:00.0: no hotplug settings from platform
[ 117.281982] pci 0000:16:00.1: no hotplug settings from platform
[ 117.281997] pci 0000:15:04.0: no hotplug settings from platform
[ 117.282014] pci 0000:17:00.0: no hotplug settings from platform
[ 117.282034] pci 0000:18:00.0: no hotplug settings from platform
[ 117.282056] pci 0000:19:00.0: no hotplug settings from platform
[ 117.282076] pci 0000:18:01.0: no hotplug settings from platform
[ 117.282098] pci 0000:1a:00.0: no hotplug settings from platform
[ 117.282117] pci 0000:18:02.0: no hotplug settings from platform
[ 117.282139] pci 0000:1b:00.0: no hotplug settings from platform
[ 117.282159] pci 0000:18:03.0: no hotplug settings from platform
[ 117.282178] pci 0000:18:04.0: no hotplug settings from platform
[ 117.283016] pcieport 0000:08:00.0: irq 52 for MSI/MSI-X
[ 117.283383] pcieport 0000:0a:00.0: irq 53 for MSI/MSI-X
[ 117.283613] pcieport 0000:0a:03.0: irq 54 for MSI/MSI-X
[ 117.283903] pcieport 0000:0a:04.0: irq 55 for MSI/MSI-X
[ 117.284213] pcieport 0000:14:00.0: irq 56 for MSI/MSI-X
[ 117.284503] pcieport 0000:15:03.0: irq 57 for MSI/MSI-X
[ 117.284835] pcieport 0000:15:04.0: irq 58 for MSI/MSI-X
[ 117.285374] hda-intel 0000:16:00.1: Handle VGA-switcheroo audio client
[ 117.285392] ------------[ cut here ]------------
[ 117.285399] WARNING: at drivers/pci/pci.c:130 pci_ioremap_bar+0x69/0x70()
[ 117.285401] Modules linked in: ata_generic pata_acpi pata_marvell fuse zram(C) rfcomm bnep snd_hda_codec_hdmi snd_hda_codec_realtek rtsx_pci_ms rtsx_pci_sdmmc memstick mmc_core iTCO_wdt iTCO_vendor_support arc4 uvcvideo iwldvm videobuf2_vmalloc videobuf2_memops mac80211 qcserial videobuf2_core usb_wwan videodev media usbserial btusb bluetooth iwlwifi coretemp kvm_intel kvm sony_laptop cfg80211 snd_hda_intel snd_hda_codec rfkill i915 pcspkr r8169 joydev mii rtsx_pci snd_hwdep intel_agp snd_pcm intel_gtt i2c_algo_bit snd_page_alloc drm_kms_helper snd_timer drm lpc_ich snd agpgart i2c_i801 mfd_core sha256_ssse3 sha256_generic dm_crypt raid0 md_mod crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 glue_helper lrw gf128mul ablk_helper cryptd xhci_hcd ehci_pci ehci_hcd dm_mirror dm_region_hash
[ 117.285478] dm_log dm_mod [last unloaded: microcode]
[ 117.285484] CPU: 0 PID: 40 Comm: kworker/0:1 Tainted: G WC 3.10.0-rc4 #7
[ 117.285487] Hardware name: Sony Corporation VPCZ23A4R/VAIO, BIOS R1013H5 05/21/2012
[ 117.285491] Workqueue: kacpi_hotplug _handle_hotplug_event_bridge
[ 117.285494] ffffffff81a2a114 ffff880253d3f808 ffffffff8165aab8 ffff880253d3f848
[ 117.285500] ffffffff8103c8cb ffff880253d3f828 ffff880253ca4000 ffff88022eb0b000
[ 117.285505] 0000000000000000 ffff880253ca3800 0000000000000001 ffff880253d3f858
[ 117.285510] Call Trace:
[ 117.285517] [<ffffffff8165aab8>] dump_stack+0x19/0x1b
[ 117.285522] [<ffffffff8103c8cb>] warn_slowpath_common+0x6b/0xa0
[ 117.285526] [<ffffffff8103c915>] warn_slowpath_null+0x15/0x20
[ 117.285530] [<ffffffff813831e9>] pci_ioremap_bar+0x69/0x70
[ 117.285536] [<ffffffffa0388bd6>] azx_first_init+0x56/0x600 [snd_hda_intel]
[ 117.285541] [<ffffffff813868ef>] ? pci_get_domain_bus_and_slot+0x2f/0x70
[ 117.285546] [<ffffffffa038ad25>] azx_probe+0x555/0x940 [snd_hda_intel]
[ 117.285551] [<ffffffff810a1a1d>] ? trace_hardirqs_on+0xd/0x10
[ 117.285555] [<ffffffff81384f66>] local_pci_probe+0x46/0x80
[ 117.285559] [<ffffffff813857d9>] pci_device_probe+0xf9/0x120
[ 117.285566] [<ffffffff8143c2c6>] driver_probe_device+0x76/0x220
[ 117.285570] [<ffffffff8143c56b>] __device_attach+0x4b/0x60
[ 117.285574] [<ffffffff8143c520>] ? __driver_attach+0xb0/0xb0
[ 117.285578] [<ffffffff8143a61c>] bus_for_each_drv+0x5c/0x90
[ 117.285582] [<ffffffff8143c218>] device_attach+0x98/0xb0
[ 117.285587] [<ffffffff8137d8d4>] pci_bus_add_device+0x34/0x60
[ 117.285590] [<ffffffff8137d939>] pci_bus_add_devices+0x39/0xa0
[ 117.285594] [<ffffffff8137d987>] pci_bus_add_devices+0x87/0xa0
[ 117.285597] [<ffffffff8137d987>] pci_bus_add_devices+0x87/0xa0
[ 117.285601] [<ffffffff8137d987>] pci_bus_add_devices+0x87/0xa0
[ 117.285604] [<ffffffff8137d987>] pci_bus_add_devices+0x87/0xa0
[ 117.285609] [<ffffffff816446b0>] enable_device+0x370/0x450
[ 117.285614] [<ffffffff813a0f3a>] acpiphp_enable_slot+0xca/0x140
[ 117.285618] [<ffffffff813a1167>] acpiphp_check_bridge+0x77/0x100
[ 117.285622] [<ffffffff813a165d>] _handle_hotplug_event_bridge+0x13d/0x290
[ 117.285628] [<ffffffff8105c212>] process_one_work+0x1c2/0x560
[ 117.285631] [<ffffffff8105c1a7>] ? process_one_work+0x157/0x560
[ 117.285636] [<ffffffff8105d126>] worker_thread+0x116/0x370
[ 117.285639] [<ffffffff8105d010>] ? manage_workers.isra.20+0x2d0/0x2d0
[ 117.285644] [<ffffffff81063986>] kthread+0xd6/0xe0
[ 117.285648] [<ffffffff81660ccb>] ? _raw_spin_unlock_irq+0x2b/0x60
[ 117.285653] [<ffffffff810638b0>] ? __init_kthread_worker+0x70/0x70
[ 117.285658] [<ffffffff8166806c>] ret_from_fork+0x7c/0xb0
[ 117.285662] [<ffffffff810638b0>] ? __init_kthread_worker+0x70/0x70
[ 117.285665] ---[ end trace f366acc9dc87b389 ]---
[ 117.285667] hda-intel 0000:16:00.1: ioremap error
[ 117.285966] pcieport 0000:17:00.0: irq 59 for MSI/MSI-X
[ 117.286353] pcieport 0000:18:00.0: irq 60 for MSI/MSI-X
[ 117.286745] pcieport 0000:18:01.0: irq 61 for MSI/MSI-X
[ 117.287164] pcieport 0000:18:02.0: irq 62 for MSI/MSI-X
[ 117.287578] pcieport 0000:18:03.0: irq 63 for MSI/MSI-X
[ 117.288003] pcieport 0000:18:04.0: irq 64 for MSI/MSI-X
[ 117.288904] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 117.289022] r8169 0000:19:00.0 (unregistered net_device): region #2 not an MMIO resource, aborting
[ 117.289396] pata_marvell 0000:1a:00.0: no available native port
[ 117.289594] pata_acpi 0000:1a:00.0: no available native port
[ 117.290123] xhci_hcd 0000:1b:00.0: init 0000:1b:00.0 fail, -16
[ 117.290128] xhci_hcd: probe of 0000:1b:00.0 failed with error -16
[ 117.290137] acpiphp_glue: acpiphp_check_bridge: 1 enabled, 0 disabled
[ 117.290235] ACPI: \_SB_.DOCK: docking
[ 117.290455] acpiphp_glue: __handle_hotplug_event_func: Bus check notify on \_SB_.PCI0.RP07.LPMB
[ 117.290460] acpiphp_glue: __handle_hotplug_event_func: Bus check notify on \_SB_.PCI0.RP07.LPMB.LPM0
[ 117.290465] acpiphp_glue: __handle_hotplug_event_func: Bus check notify on \_SB_.PCI0.RP07.LPMB.LPM1
[ 117.290469] acpiphp_glue: __handle_hotplug_event_func: Bus check notify on \_SB_.PCI0.RP07.LPMB.LPM2
[ 117.290472] acpiphp_glue: __handle_hotplug_event_func: Bus check notify on \_SB_.PCI0.RP07.LPMB.LPM2.LPRI.LPR0.GFXA
[ 117.290486] acpiphp_glue: __handle_hotplug_event_func: Bus check notify on \_SB_.PCI0.RP07.LPMB.LPM2.LPRI.LPR0.GHDA
[ 117.290498] acpiphp_glue: __handle_hotplug_event_func: Bus check notify on \_SB_.PCI0.RP07.LPMB.LPM2.LPRI.LPR1.LPCI.LPC0.DLAN
[ 117.290506] acpiphp_glue: __handle_hotplug_event_func: Bus check notify on \_SB_.PCI0.RP07.LPMB.LPM2.LPRI.LPR1.LPCI.LPC1.DODD
[ 117.290513] acpiphp_glue: __handle_hotplug_event_func: Bus check notify on \_SB_.PCI0.RP07.LPMB.LPM2.LPRI.LPR1.LPCI.LPC2.DUSB
[ 143.410983] acpiphp_glue: __handle_hotplug_event_func: Device eject notify on \_SB_.PCI0.RP07.LPMB
[ 143.417808] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=none,decodes=io+mem:owns=none
[ 143.422074] pci_bus 0000:0b: busn_res: [bus 0b] is released
[ 143.422150] pci_bus 0000:0c: busn_res: [bus 0c] is released
[ 143.422212] pci_bus 0000:16: busn_res: [bus 16] is released
[ 143.439295] acpiphp: Slot [1-2] unregistered
[ 143.439324] acpiphp: release_slot - physical_slot = 1-2
[ 143.439424] pci_bus 0000:19: busn_res: [bus 19] is released
[ 143.443326] acpiphp: Slot [1-3] unregistered
[ 143.443345] acpiphp: release_slot - physical_slot = 1-3
[ 143.443476] pci_bus 0000:1a: busn_res: [bus 1a] is released
[ 143.449316] acpiphp: Slot [1-4] unregistered
[ 143.449349] acpiphp: release_slot - physical_slot = 1-4
[ 143.449501] pci_bus 0000:1b: busn_res: [bus 1b] is released
[ 143.456336] acpiphp: Slot [1-5] unregistered
[ 143.456368] acpiphp: release_slot - physical_slot = 1-5
[ 143.456539] pci_bus 0000:1c: busn_res: [bus 1c] is released
[ 143.456643] pci_bus 0000:1d: busn_res: [bus 1d] is released
[ 143.456786] pci_bus 0000:18: busn_res: [bus 18-1d] is released
[ 143.457047] pci_bus 0000:17: busn_res: [bus 17-1d] is released
[ 143.457219] pci_bus 0000:15: busn_res: [bus 15-1d] is released
[ 143.457351] pci_bus 0000:14: busn_res: [bus 14-1d] is released
[ 143.457468] pci_bus 0000:0a: busn_res: [bus 0a-1d] is released
[ 143.463311] acpiphp: Slot [1-1] unregistered
[ 143.463329] acpiphp: release_slot - physical_slot = 1-1
[ 143.469316] acpiphp: Slot [2] unregistered
[ 143.469334] acpiphp: release_slot - physical_slot = 2
[ 143.474327] acpiphp: Slot [3] unregistered
[ 143.474359] acpiphp: release_slot - physical_slot = 3
[ 143.475275] ACPI: Device does not support D3cold
[ 143.475480] ACPI: Device does not support D3cold
[ 143.475916] ACPI: Device does not support D3cold
[ 143.476252] ACPI: Device does not support D3cold
[ 143.476376] ACPI: Device does not support D3cold
[ 143.477513] ACPI: Device does not support D3cold
[ 143.477720] ACPI: Device does not support D3cold
[ 143.479358] ACPI: Device does not support D3cold
[ 143.480263] ACPI: Device does not support D3cold
[ 143.480389] ACPI: Device does not support D3cold
[ 143.481171] ACPI: Device does not support D3cold
[ 143.481470] ACPI: Device does not support D3cold
[ 143.481915] ACPI: Device does not support D3cold
[ 143.484751] ACPI: Device does not support D3cold
[ 143.484830] ACPI: Device does not support D3cold
[ 143.485704] ACPI: Device does not support D3cold
[ 143.485968] ACPI: Device does not support D3cold
[ 143.486066] ACPI: Device does not support D3cold
[ 143.486143] ACPI: Device does not support D3cold
[ 143.486211] ACPI: Device does not support D3cold
[ 143.486312] ACPI: Device does not support D3cold
[ 143.486381] ACPI: Device does not support D3cold
[ 143.486452] ACPI: Device does not support D3cold
[ 143.486519] ACPI: Device does not support D3cold
[ 143.486594] ACPI: Device does not support D3cold
[ 143.486675] ACPI: Device does not support D3cold
[ 143.486746] ACPI: Device does not support D3cold
[ 143.486813] ACPI: Device does not support D3cold
[ 143.486880] ACPI: Device does not support D3cold
[ 143.486947] ACPI: Device does not support D3cold
[ 143.487014] ACPI: Device does not support D3cold
[ 143.487141] ACPI: Device does not support D3cold
[ 143.487148] ACPI: \_SB_.DOCK: undocking
[ 143.959463] ACPI: \_SB_.DOCK: docking
[ 143.959656] ACPI: \_SB_.DOCK: Unable to dock!
[ 143.959664] acpiphp_glue: _handle_hotplug_event_bridge: Bus check notify on \_SB_.PCI0.RP07
[ 143.959665] acpiphp_glue: _handle_hotplug_event_bridge: re-enumerating slots under \_SB_.PCI0.RP07
[ 143.959670] acpiphp_glue: acpiphp_check_bridge: 0 enabled, 0 disabled
[ 147.480929] ata1.00: configured for UDMA/133
[ 147.480934] ata1: EH complete
[ 147.481145] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 147.485978] ata2.00: configured for UDMA/133
[ 147.485982] ata2: EH complete
[ 147.486261] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 147.541075] EXT4-fs (dm-1): re-mounted. Opts: commit=600
[ 147.545384] EXT4-fs (md126p1): re-mounted. Opts: commit=600
[ 147.547876] EXT4-fs (dm-2): re-mounted. Opts: commit=600
[ 147.550509] EXT4-fs (dm-3): re-mounted. Opts: commit=600
[ 156.040158] ata1.00: configured for UDMA/133
[ 156.040162] ata1: EH complete
[ 156.040339] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 156.043420] ata2.00: configured for UDMA/133
[ 156.043424] ata2: EH complete
[ 156.043585] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 156.057205] EXT4-fs (dm-1): re-mounted. Opts: commit=0
[ 156.061602] EXT4-fs (md126p1): re-mounted. Opts: commit=0
[ 156.064003] EXT4-fs (dm-2): re-mounted. Opts: commit=0
[ 156.067140] EXT4-fs (dm-3): re-mounted. Opts: commit=0
[ 157.330446] acpiphp_glue: _handle_hotplug_event_bridge: Device check notify on \_SB_.PCI0.RP07
[ 157.350245] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 157.350269] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 157.350625] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 157.350733] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 157.350753] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 157.350772] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 157.350876] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 157.351105] pci 0000:08:00.0: [8086:151b] type 01 class 0x060400
[ 157.351275] pci 0000:08:00.0: supports D1 D2
[ 157.351277] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 157.356660] acpiphp_glue: found ACPI PCI Hotplug slot 1 at PCI 0000:0a:00
[ 157.356730] acpiphp: Slot [1-1] registered
[ 157.356764] acpiphp_glue: found ACPI PCI Hotplug slot 2 at PCI 0000:0a:03
[ 157.356825] acpiphp: Slot [2] registered
[ 157.356855] acpiphp_glue: found ACPI PCI Hotplug slot 3 at PCI 0000:0a:04
[ 157.356954] acpiphp: Slot [3] registered
[ 157.357004] pci 0000:0a:00.0: [8086:151b] type 01 class 0x060400
[ 157.357171] pci 0000:0a:00.0: supports D1 D2
[ 157.357174] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 157.358291] pci 0000:0a:03.0: [8086:151b] type 01 class 0x060400
[ 157.358469] pci 0000:0a:03.0: supports D1 D2
[ 157.358471] pci 0000:0a:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 157.359069] pci 0000:0a:04.0: [8086:151b] type 01 class 0x060400
[ 157.359234] pci 0000:0a:04.0: supports D1 D2
[ 157.359236] pci 0000:0a:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 157.359417] pci 0000:08:00.0: PCI bridge to [bus 0a-1d]
[ 157.359431] pci 0000:08:00.0: bridge window [io 0x3000-0x5fff]
[ 157.359439] pci 0000:08:00.0: bridge window [mem 0xb0000000-0xc03fffff]
[ 157.359453] pci 0000:08:00.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref]
[ 157.359581] pci 0000:0a:00.0: PCI bridge to [bus 0b]
[ 157.359596] pci 0000:0a:00.0: bridge window [mem 0xc0300000-0xc03fffff]
[ 157.359726] pci 0000:0a:03.0: PCI bridge to [bus 0c]
[ 157.359916] pci 0000:14:00.0: [8086:151b] type 01 class 0x060400
[ 157.360147] pci 0000:14:00.0: supports D1 D2
[ 157.360149] pci 0000:14:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 157.360305] pci 0000:0a:04.0: PCI bridge to [bus 14-1d]
[ 157.360314] pci 0000:0a:04.0: bridge window [io 0x3000-0x5fff]
[ 157.360320] pci 0000:0a:04.0: bridge window [mem 0xb0000000-0xc02fffff]
[ 157.360330] pci 0000:0a:04.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref]
[ 157.360568] pci 0000:15:03.0: [8086:151b] type 01 class 0x060400
[ 157.360806] pci 0000:15:03.0: supports D1 D2
[ 157.360809] pci 0000:15:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 157.362610] pci 0000:15:04.0: [8086:151b] type 01 class 0x060400
[ 157.362850] pci 0000:15:04.0: supports D1 D2
[ 157.362853] pci 0000:15:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 157.363245] pci 0000:14:00.0: PCI bridge to [bus 15-1d]
[ 157.363263] pci 0000:14:00.0: bridge window [io 0x3000-0x5fff]
[ 157.363273] pci 0000:14:00.0: bridge window [mem 0xb0000000-0xc02fffff]
[ 157.363292] pci 0000:14:00.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref]
[ 157.363576] acpiphp_glue: found ACPI PCI Hotplug slot 1 at PCI 0000:16:00
[ 157.363624] acpiphp: Slot [1-2] registered
[ 157.363662] acpiphp_glue: sibling found, but _SUN doesn't match!
[ 157.363728] pci 0000:16:00.0: [1002:6740] type 00 class 0x030000
[ 157.363797] pci 0000:16:00.0: reg 10: [mem 0x00000000-0x0fffffff 64bit pref]
[ 157.363853] pci 0000:16:00.0: reg 18: [mem 0x00000000-0x0001ffff 64bit]
[ 157.363888] pci 0000:16:00.0: reg 20: [io 0x0000-0x00ff]
[ 157.363952] pci 0000:16:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 157.364128] pci 0000:16:00.0: supports D1 D2
[ 157.365249] vgaarb: device added: PCI:0000:16:00.0,decodes=io+mem,owns=none,locks=none
[ 157.365254] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
[ 157.365322] pci 0000:16:00.1: [1002:aa90] type 00 class 0x040300
[ 157.365385] pci 0000:16:00.1: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 157.365706] pci 0000:16:00.1: supports D1 D2
[ 157.367455] pci 0000:15:03.0: PCI bridge to [bus 16]
[ 157.367472] pci 0000:15:03.0: bridge window [io 0x5000-0x5fff]
[ 157.367482] pci 0000:15:03.0: bridge window [mem 0xc0200000-0xc02fffff]
[ 157.367500] pci 0000:15:03.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
[ 157.367761] pci 0000:17:00.0: [8086:151b] type 01 class 0x060400
[ 157.368096] pci 0000:17:00.0: supports D1 D2
[ 157.368098] pci 0000:17:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 157.368570] pci 0000:15:04.0: PCI bridge to [bus 17-1d]
[ 157.368589] pci 0000:15:04.0: bridge window [io 0x3000-0x4fff]
[ 157.368599] pci 0000:15:04.0: bridge window [mem 0xc0000000-0xc01fffff]
[ 157.368617] pci 0000:15:04.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref]
[ 157.369018] pci 0000:18:00.0: [8086:151b] type 01 class 0x060400
[ 157.369358] pci 0000:18:00.0: supports D1 D2
[ 157.369361] pci 0000:18:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 157.369688] pci 0000:18:01.0: [8086:151b] type 01 class 0x060400
[ 157.370034] pci 0000:18:01.0: supports D1 D2
[ 157.370037] pci 0000:18:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 157.370345] pci 0000:18:02.0: [8086:151b] type 01 class 0x060400
[ 157.370703] pci 0000:18:02.0: supports D1 D2
[ 157.370707] pci 0000:18:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 157.371027] pci 0000:18:03.0: [8086:151b] type 01 class 0x060400
[ 157.371365] pci 0000:18:03.0: supports D1 D2
[ 157.371367] pci 0000:18:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 157.372171] pci 0000:18:04.0: [8086:151b] type 01 class 0x060400
[ 157.372524] pci 0000:18:04.0: supports D1 D2
[ 157.372527] pci 0000:18:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 157.373029] pci 0000:17:00.0: PCI bridge to [bus 18-1d]
[ 157.373050] pci 0000:17:00.0: bridge window [io 0x3000-0x4fff]
[ 157.373061] pci 0000:17:00.0: bridge window [mem 0xc0000000-0xc01fffff]
[ 157.373081] pci 0000:17:00.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref]
[ 157.373438] acpiphp_glue: found ACPI PCI Hotplug slot 1 at PCI 0000:19:00
[ 157.373473] acpiphp: Slot [1-3] registered
[ 157.373565] pci 0000:19:00.0: [10ec:8168] type 00 class 0x020000
[ 157.373628] pci 0000:19:00.0: reg 10: [io 0x0000-0x00ff]
[ 157.373740] pci 0000:19:00.0: reg 18: [mem 0x00000000-0x00000fff 64bit pref]
[ 157.373808] pci 0000:19:00.0: reg 20: [mem 0x00000000-0x00003fff 64bit pref]
[ 157.374111] pci 0000:19:00.0: supports D1 D2
[ 157.374114] pci 0000:19:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 157.374545] pci 0000:18:00.0: PCI bridge to [bus 19]
[ 157.374566] pci 0000:18:00.0: bridge window [io 0x4000-0x4fff]
[ 157.374596] pci 0000:18:00.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref]
[ 157.375014] acpiphp_glue: found ACPI PCI Hotplug slot 1 at PCI 0000:1a:00
[ 157.375086] acpiphp: Slot [1-4] registered
[ 157.375171] pci 0000:1a:00.0: [11ab:6121] type 00 class 0x01018f
[ 157.375231] pci 0000:1a:00.0: reg 10: [io 0x8000-0x8007]
[ 157.375274] pci 0000:1a:00.0: reg 14: [io 0x8040-0x8043]
[ 157.375314] pci 0000:1a:00.0: reg 18: [io 0x8200-0x8207]
[ 157.375357] pci 0000:1a:00.0: reg 1c: [io 0x8800-0x8803]
[ 157.375402] pci 0000:1a:00.0: reg 20: [io 0x900000-0x90000f]
[ 157.375456] pci 0000:1a:00.0: reg 24: [mem 0x00800000-0x008003ff]
[ 157.375725] pci 0000:1a:00.0: supports D1
[ 157.375728] pci 0000:1a:00.0: PME# supported from D0 D1 D3hot
[ 157.376757] pci 0000:18:01.0: PCI bridge to [bus 1a]
[ 157.376780] pci 0000:18:01.0: bridge window [io 0x3000-0x3fff]
[ 157.376794] pci 0000:18:01.0: bridge window [mem 0xc0100000-0xc01fffff]
[ 157.377119] acpiphp_glue: found ACPI PCI Hotplug slot 1 at PCI 0000:1b:00
[ 157.377198] acpiphp: Slot [1-5] registered
[ 157.377299] pci 0000:1b:00.0: [1033:0194] type 00 class 0x0c0330
[ 157.377383] pci 0000:1b:00.0: reg 10: [mem 0x00000000-0x00001fff 64bit]
[ 157.377861] pci 0000:1b:00.0: PME# supported from D0 D3hot D3cold
[ 157.378220] pci 0000:18:02.0: PCI bridge to [bus 1b]
[ 157.378254] pci 0000:18:02.0: bridge window [mem 0xc0000000-0xc00fffff]
[ 157.378604] pci 0000:18:03.0: PCI bridge to [bus 1c]
[ 157.378933] pci 0000:18:04.0: PCI bridge to [bus 1d]
[ 157.379525] pci 0000:08:00.0: BAR 15: can't assign mem pref (size 0x28000000)
[ 157.379528] pci 0000:08:00.0: BAR 14: assigned [mem 0xb0000000-0xc06fffff]
[ 157.379530] pci 0000:08:00.0: BAR 13: can't assign io (size 0xb000)
[ 157.379535] pci 0000:0a:04.0: BAR 15: can't assign mem pref (size 0x20000000)
[ 157.379537] pci 0000:0a:00.0: BAR 14: assigned [mem 0xb0000000-0xb01fffff]
[ 157.379539] pci 0000:0a:00.0: BAR 15: assigned [mem 0xb0200000-0xb03fffff 64bit pref]
[ 157.379541] pci 0000:0a:03.0: BAR 14: assigned [mem 0xb0400000-0xb05fffff]
[ 157.379543] pci 0000:0a:03.0: BAR 15: assigned [mem 0xb0600000-0xb07fffff 64bit pref]
[ 157.379545] pci 0000:0a:04.0: BAR 14: can't assign mem (size 0x10300000)
[ 157.379547] pci 0000:0a:00.0: BAR 13: can't assign io (size 0x1000)
[ 157.379548] pci 0000:0a:03.0: BAR 13: can't assign io (size 0x1000)
[ 157.379550] pci 0000:0a:04.0: BAR 13: can't assign io (size 0x8000)
[ 157.379553] pci 0000:0a:00.0: PCI bridge to [bus 0b]
[ 157.379561] pci 0000:0a:00.0: bridge window [mem 0xb0000000-0xb01fffff]
[ 157.379567] pci 0000:0a:00.0: bridge window [mem 0xb0200000-0xb03fffff 64bit pref]
[ 157.379578] pci 0000:0a:03.0: PCI bridge to [bus 0c]
[ 157.379586] pci 0000:0a:03.0: bridge window [mem 0xb0400000-0xb05fffff]
[ 157.379592] pci 0000:0a:03.0: bridge window [mem 0xb0600000-0xb07fffff 64bit pref]
[ 157.379604] pci 0000:14:00.0: BAR 15: can't assign mem pref (size 0x20000000)
[ 157.379605] pci 0000:14:00.0: BAR 14: can't assign mem (size 0x10300000)
[ 157.379607] pci 0000:14:00.0: BAR 13: can't assign io (size 0x7000)
[ 157.379610] pci 0000:15:03.0: BAR 15: can't assign mem pref (size 0x18000000)
[ 157.379612] pci 0000:15:03.0: BAR 14: can't assign mem (size 0x200000)
[ 157.379614] pci 0000:15:04.0: BAR 14: can't assign mem (size 0xa00000)
[ 157.379615] pci 0000:15:04.0: BAR 15: can't assign mem pref (size 0xa00000)
[ 157.379617] pci 0000:15:03.0: BAR 13: can't assign io (size 0x1000)
[ 157.379619] pci 0000:15:04.0: BAR 13: can't assign io (size 0x6000)
[ 157.379622] pci 0000:16:00.0: BAR 0: can't assign mem pref (size 0x10000000)
[ 157.379623] pci 0000:16:00.0: BAR 2: can't assign mem (size 0x20000)
[ 157.379625] pci 0000:16:00.0: BAR 6: can't assign mem pref (size 0x20000)
[ 157.379627] pci 0000:16:00.1: BAR 0: can't assign mem (size 0x4000)
[ 157.379628] pci 0000:16:00.0: BAR 4: can't assign io (size 0x100)
[ 157.379630] pci 0000:15:03.0: PCI bridge to [bus 16]
[ 157.379663] pci 0000:17:00.0: BAR 14: can't assign mem (size 0xa00000)
[ 157.379665] pci 0000:17:00.0: BAR 15: can't assign mem pref (size 0xa00000)
[ 157.379666] pci 0000:17:00.0: BAR 13: can't assign io (size 0x5000)
[ 157.379671] pci 0000:18:00.0: BAR 14: can't assign mem (size 0x200000)
[ 157.379672] pci 0000:18:00.0: BAR 15: can't assign mem pref (size 0x200000)
[ 157.379674] pci 0000:18:01.0: BAR 14: can't assign mem (size 0x200000)
[ 157.379676] pci 0000:18:01.0: BAR 15: can't assign mem pref (size 0x200000)
[ 157.379677] pci 0000:18:02.0: BAR 14: can't assign mem (size 0x200000)
[ 157.379679] pci 0000:18:02.0: BAR 15: can't assign mem pref (size 0x200000)
[ 157.379680] pci 0000:18:03.0: BAR 14: can't assign mem (size 0x200000)
[ 157.379682] pci 0000:18:03.0: BAR 15: can't assign mem pref (size 0x200000)
[ 157.379684] pci 0000:18:04.0: BAR 14: can't assign mem (size 0x200000)
[ 157.379685] pci 0000:18:04.0: BAR 15: can't assign mem pref (size 0x200000)
[ 157.379687] pci 0000:18:00.0: BAR 13: can't assign io (size 0x1000)
[ 157.379688] pci 0000:18:01.0: BAR 13: can't assign io (size 0x1000)
[ 157.379690] pci 0000:18:02.0: BAR 13: can't assign io (size 0x1000)
[ 157.379691] pci 0000:18:03.0: BAR 13: can't assign io (size 0x1000)
[ 157.379693] pci 0000:18:04.0: BAR 13: can't assign io (size 0x1000)
[ 157.379697] pci 0000:19:00.0: BAR 4: can't assign mem pref (size 0x4000)
[ 157.379699] pci 0000:19:00.0: BAR 2: can't assign mem pref (size 0x1000)
[ 157.379700] pci 0000:19:00.0: BAR 0: can't assign io (size 0x100)
[ 157.379702] pci 0000:18:00.0: PCI bridge to [bus 19]
[ 157.379746] pci 0000:1a:00.0: BAR 5: can't assign mem (size 0x400)
[ 157.379748] pci 0000:1a:00.0: BAR 4: can't assign io (size 0x10)
[ 157.379750] pci 0000:1a:00.0: BAR 0: can't assign io (size 0x8)
[ 157.379751] pci 0000:1a:00.0: BAR 2: can't assign io (size 0x8)
[ 157.379752] pci 0000:1a:00.0: BAR 1: can't assign io (size 0x4)
[ 157.379754] pci 0000:1a:00.0: BAR 3: can't assign io (size 0x4)
[ 157.379756] pci 0000:18:01.0: PCI bridge to [bus 1a]
[ 157.379800] pci 0000:1b:00.0: BAR 0: can't assign mem (size 0x2000)
[ 157.379802] pci 0000:18:02.0: PCI bridge to [bus 1b]
[ 157.379844] pci 0000:18:03.0: PCI bridge to [bus 1c]
[ 157.379886] pci 0000:18:04.0: PCI bridge to [bus 1d]
[ 157.379930] pci 0000:17:00.0: PCI bridge to [bus 18-1d]
[ 157.379972] pci 0000:15:04.0: PCI bridge to [bus 17-1d]
[ 157.380004] pci 0000:14:00.0: PCI bridge to [bus 15-1d]
[ 157.380036] pci 0000:0a:04.0: PCI bridge to [bus 14-1d]
[ 157.380059] pci 0000:08:00.0: PCI bridge to [bus 0a-1d]
[ 157.380067] pci 0000:08:00.0: bridge window [mem 0xb0000000-0xc06fffff]
[ 157.380091] pci 0000:08:00.0: no hotplug settings from platform
[ 157.380100] pci 0000:0a:00.0: no hotplug settings from platform
[ 157.380110] pci 0000:0a:03.0: no hotplug settings from platform
[ 157.380119] pci 0000:0a:04.0: no hotplug settings from platform
[ 157.380131] pci 0000:14:00.0: no hotplug settings from platform
[ 157.380145] pci 0000:15:03.0: no hotplug settings from platform
[ 157.380162] pci 0000:16:00.0: no hotplug settings from platform
[ 157.380179] pci 0000:16:00.1: no hotplug settings from platform
[ 157.380194] pci 0000:15:04.0: no hotplug settings from platform
[ 157.380211] pci 0000:17:00.0: no hotplug settings from platform
[ 157.380230] pci 0000:18:00.0: no hotplug settings from platform
[ 157.380252] pci 0000:19:00.0: no hotplug settings from platform
[ 157.380272] pci 0000:18:01.0: no hotplug settings from platform
[ 157.380294] pci 0000:1a:00.0: no hotplug settings from platform
[ 157.380313] pci 0000:18:02.0: no hotplug settings from platform
[ 157.380336] pci 0000:1b:00.0: no hotplug settings from platform
[ 157.380355] pci 0000:18:03.0: no hotplug settings from platform
[ 157.380374] pci 0000:18:04.0: no hotplug settings from platform
[ 157.381247] pcieport 0000:08:00.0: irq 52 for MSI/MSI-X
[ 157.381456] pcieport 0000:0a:00.0: irq 53 for MSI/MSI-X
[ 157.381680] pcieport 0000:0a:03.0: irq 54 for MSI/MSI-X
[ 157.381898] pcieport 0000:0a:04.0: irq 55 for MSI/MSI-X
[ 157.382153] pcieport 0000:14:00.0: irq 56 for MSI/MSI-X
[ 157.382673] pcieport 0000:15:03.0: irq 57 for MSI/MSI-X
[ 157.382948] pcieport 0000:15:04.0: irq 58 for MSI/MSI-X
[ 157.383379] hda-intel 0000:16:00.1: Handle VGA-switcheroo audio client
[ 157.383390] ------------[ cut here ]------------
[ 157.383396] WARNING: at drivers/pci/pci.c:130 pci_ioremap_bar+0x69/0x70()
[ 157.383397] Modules linked in: ata_generic pata_acpi pata_marvell fuse zram(C) rfcomm bnep snd_hda_codec_hdmi snd_hda_codec_realtek rtsx_pci_ms rtsx_pci_sdmmc memstick mmc_core iTCO_wdt iTCO_vendor_support arc4 uvcvideo iwldvm videobuf2_vmalloc videobuf2_memops mac80211 qcserial videobuf2_core usb_wwan videodev media usbserial btusb bluetooth iwlwifi coretemp kvm_intel kvm sony_laptop cfg80211 snd_hda_intel snd_hda_codec rfkill i915 pcspkr r8169 joydev mii rtsx_pci snd_hwdep intel_agp snd_pcm intel_gtt i2c_algo_bit snd_page_alloc drm_kms_helper snd_timer drm lpc_ich snd agpgart i2c_i801 mfd_core sha256_ssse3 sha256_generic dm_crypt raid0 md_mod crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 glue_helper lrw gf128mul ablk_helper cryptd xhci_hcd ehci_pci ehci_hcd dm_mirror dm_region_hash
[ 157.383462] dm_log dm_mod [last unloaded: microcode]
[ 157.383469] CPU: 0 PID: 40 Comm: kworker/0:1 Tainted: G WC 3.10.0-rc4 #7
[ 157.383473] Hardware name: Sony Corporation VPCZ23A4R/VAIO, BIOS R1013H5 05/21/2012
[ 157.383478] Workqueue: kacpi_hotplug _handle_hotplug_event_bridge
[ 157.383481] ffffffff81a2a114 ffff880253d3f808 ffffffff8165aab8 ffff880253d3f848
[ 157.383487] ffffffff8103c8cb ffff880253d3f828 ffff880253152800 ffff88022eb09000
[ 157.383494] 0000000000000000 ffff880253153000 0000000000000001 ffff880253d3f858
[ 157.383500] Call Trace:
[ 157.383507] [<ffffffff8165aab8>] dump_stack+0x19/0x1b
[ 157.383513] [<ffffffff8103c8cb>] warn_slowpath_common+0x6b/0xa0
[ 157.383519] [<ffffffff8103c915>] warn_slowpath_null+0x15/0x20
[ 157.383524] [<ffffffff813831e9>] pci_ioremap_bar+0x69/0x70
[ 157.383532] [<ffffffffa0388bd6>] azx_first_init+0x56/0x600 [snd_hda_intel]
[ 157.383536] [<ffffffff813868ef>] ? pci_get_domain_bus_and_slot+0x2f/0x70
[ 157.383540] [<ffffffffa038ad25>] azx_probe+0x555/0x940 [snd_hda_intel]
[ 157.383543] [<ffffffff810a1a1d>] ? trace_hardirqs_on+0xd/0x10
[ 157.383546] [<ffffffff81384f66>] local_pci_probe+0x46/0x80
[ 157.383549] [<ffffffff813857d9>] pci_device_probe+0xf9/0x120
[ 157.383554] [<ffffffff8143c2c6>] driver_probe_device+0x76/0x220
[ 157.383556] [<ffffffff8143c56b>] __device_attach+0x4b/0x60
[ 157.383559] [<ffffffff8143c520>] ? __driver_attach+0xb0/0xb0
[ 157.383561] [<ffffffff8143a61c>] bus_for_each_drv+0x5c/0x90
[ 157.383564] [<ffffffff8143c218>] device_attach+0x98/0xb0
[ 157.383566] [<ffffffff8137d8d4>] pci_bus_add_device+0x34/0x60
[ 157.383569] [<ffffffff8137d939>] pci_bus_add_devices+0x39/0xa0
[ 157.383571] [<ffffffff8137d987>] pci_bus_add_devices+0x87/0xa0
[ 157.383573] [<ffffffff8137d987>] pci_bus_add_devices+0x87/0xa0
[ 157.383575] [<ffffffff8137d987>] pci_bus_add_devices+0x87/0xa0
[ 157.383577] [<ffffffff8137d987>] pci_bus_add_devices+0x87/0xa0
[ 157.383580] [<ffffffff816446b0>] enable_device+0x370/0x450
[ 157.383583] [<ffffffff813a0f3a>] acpiphp_enable_slot+0xca/0x140
[ 157.383585] [<ffffffff813a1167>] acpiphp_check_bridge+0x77/0x100
[ 157.383587] [<ffffffff813a165d>] _handle_hotplug_event_bridge+0x13d/0x290
[ 157.383591] [<ffffffff8105c212>] process_one_work+0x1c2/0x560
[ 157.383594] [<ffffffff8105c1a7>] ? process_one_work+0x157/0x560
[ 157.383596] [<ffffffff8105d126>] worker_thread+0x116/0x370
[ 157.383598] [<ffffffff8105d010>] ? manage_workers.isra.20+0x2d0/0x2d0
[ 157.383601] [<ffffffff81063986>] kthread+0xd6/0xe0
[ 157.383604] [<ffffffff81660ccb>] ? _raw_spin_unlock_irq+0x2b/0x60
[ 157.383607] [<ffffffff810638b0>] ? __init_kthread_worker+0x70/0x70
[ 157.383610] [<ffffffff8166806c>] ret_from_fork+0x7c/0xb0
[ 157.383613] [<ffffffff810638b0>] ? __init_kthread_worker+0x70/0x70
[ 157.383614] ---[ end trace f366acc9dc87b38a ]---
[ 157.383616] hda-intel 0000:16:00.1: ioremap error
[ 157.383816] pcieport 0000:17:00.0: irq 59 for MSI/MSI-X
[ 157.384146] pcieport 0000:18:00.0: irq 60 for MSI/MSI-X
[ 157.384519] pcieport 0000:18:01.0: irq 61 for MSI/MSI-X
[ 157.384913] pcieport 0000:18:02.0: irq 62 for MSI/MSI-X
[ 157.385273] pcieport 0000:18:03.0: irq 63 for MSI/MSI-X
[ 157.385646] pcieport 0000:18:04.0: irq 64 for MSI/MSI-X
[ 157.385977] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 157.386061] r8169 0000:19:00.0 (unregistered net_device): region #2 not an MMIO resource, aborting
[ 157.386614] pata_marvell 0000:1a:00.0: no available native port
[ 157.386749] pata_acpi 0000:1a:00.0: no available native port
[ 157.387111] xhci_hcd 0000:1b:00.0: init 0000:1b:00.0 fail, -16
[ 157.387115] xhci_hcd: probe of 0000:1b:00.0 failed with error -16
[ 157.387123] acpiphp_glue: acpiphp_check_bridge: 1 enabled, 0 disabled
[ 157.387162] ACPI: \_SB_.DOCK: docking
[ 157.387401] acpiphp_glue: __handle_hotplug_event_func: Bus check notify on \_SB_.PCI0.RP07.LPMB
[ 157.387406] acpiphp_glue: __handle_hotplug_event_func: Bus check notify on \_SB_.PCI0.RP07.LPMB.LPM0
[ 157.387410] acpiphp_glue: __handle_hotplug_event_func: Bus check notify on \_SB_.PCI0.RP07.LPMB.LPM1
[ 157.387414] acpiphp_glue: __handle_hotplug_event_func: Bus check notify on \_SB_.PCI0.RP07.LPMB.LPM2
[ 157.387418] acpiphp_glue: __handle_hotplug_event_func: Bus check notify on \_SB_.PCI0.RP07.LPMB.LPM2.LPRI.LPR0.GFXA
[ 157.387432] acpiphp_glue: __handle_hotplug_event_func: Bus check notify on \_SB_.PCI0.RP07.LPMB.LPM2.LPRI.LPR0.GHDA
[ 157.387459] acpiphp_glue: __handle_hotplug_event_func: Bus check notify on \_SB_.PCI0.RP07.LPMB.LPM2.LPRI.LPR1.LPCI.LPC0.DLAN
[ 157.387469] acpiphp_glue: __handle_hotplug_event_func: Bus check notify on \_SB_.PCI0.RP07.LPMB.LPM2.LPRI.LPR1.LPCI.LPC1.DODD
[ 157.387478] acpiphp_glue: __handle_hotplug_event_func: Bus check notify on \_SB_.PCI0.RP07.LPMB.LPM2.LPRI.LPR1.LPCI.LPC2.DUSB

Next message: Andy Lutomirski: "Re: adopt(pid_t pid) syscall proposal [patch included]"
Previous message: Paul E. McKenney: "Re: [PATCH RFC ticketlock] Auto-queued ticketlock"
In reply to: Jiang Liu: "Re: [PATCH] ACPIPHP: fix device destroying order issue in handlingdock notification"
Next in thread: Jiang Liu: "Re: [PATCH] ACPIPHP: fix device destroying order issue in handlingdock notification"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]