Re: [PATCH] arm: dt: zynq: Add support for the zc706 platform

[Dinh Nguyen]

Hi Soren,

On Mon, 2013-06-10 at 10:10 -0700, Soren Brinkmann wrote:
> Add a DT fragment for the zc706 Zynq platform. Also, adding a
> corresponding target to the Makefile and adding an appropriate
> compatibility string in the BSP.
> 
> Signed-off-by: Soren Brinkmann <soren.brinkmann@xxxxxxxxxx>
> ---
>  arch/arm/boot/dts/Makefile       |  3 ++-
>  arch/arm/boot/dts/zynq-zc706.dts | 31 +++++++++++++++++++++++++++++++
>  arch/arm/mach-zynq/common.c      |  1 +
>  3 files changed, 34 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/boot/dts/zynq-zc706.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index b9f7121..2aecf7e 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -206,7 +206,8 @@ dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \
>  	wm8505-ref.dtb \
>  	wm8650-mid.dtb \
>  	wm8850-w70v2.dtb
> -dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb
> +dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \
> +	zynq-zc706.dtb
>  
>  targets += dtbs
>  targets += $(dtb-y)
> diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts
> new file mode 100644
> index 0000000..a8a1d7d
> --- /dev/null
> +++ b/arch/arm/boot/dts/zynq-zc706.dts
> @@ -0,0 +1,31 @@
> +/*
> + *  Copyright (C) 2011 Xilinx
> + *  Copyright (C) 2012 National Instruments Corp.
> + *  Copyright (C) 2013 Xilinx
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +/dts-v1/;
> +/include/ "zynq-7000.dtsi"
> +
> +/ {
> +	model = "Zynq ZC706 Development Board";
> +	compatible = "xlnx,zynq-zc706", "xlnx,zynq-7000";
> +
> +	memory {
> +		device_type = "memory";
> +		reg = <0x0 0x40000000>;
> +	};
> +
> +	chosen {
> +		bootargs = "console=ttyPS1,115200 earlyprintk";
> +	};
> +
> +};
> diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
> index 5bfe703..221694b 100644
> --- a/arch/arm/mach-zynq/common.c
> +++ b/arch/arm/mach-zynq/common.c
> @@ -99,6 +99,7 @@ static void zynq_system_reset(char mode, const char *cmd)
>  
>  static const char * const zynq_dt_match[] = {
>  	"xlnx,zynq-zc702",
> +	"xlnx,zynq-zc706",

You really don't need to add zc706 here if it is already compatable with
zynq-7000.

Dinh
>  	"xlnx,zynq-7000",
>  	NULL
>  };



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/