Re: [PATCH 6/6] ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC

[Arnd Bergmann]

On Tuesday 11 June 2013, Jingoo Han wrote:
> > > +           ranges = <0x00000800 0 0x40000000 0x40000000 0 0x00200000   /* configuration space */
> > > +                     0x81000000 0 0          0x40200000 0 0x00004000   /* downstream I/O */
> > > +                     0x82000000 0 0          0x40204000 0 0x10000000>; /* non-prefetchable memory */
> > > +   };
> > 
> ...
> > Also, shouldn't your memory space end on a 256MB boundary, rather than
> > extend up to 0x50203fff?
> 
> According to the manual of Exynos PCIe, each memory space for Exynos PCIe
> can support 512MB, including I/O, CFG regions.
> 
> Is there any problem when over 256MB boundary is used?
> Please let me know. :)

No, that's not a problem, but I think you should have the window span
the entire space that is provided in hardware. If there are 512 MB total, why
not use them?

You could use 

	ranges = <0x82000000 0 0          0x40204000 0 0x1fdfc000>;

to pass a range for the memory space that extends all the way until
0x5fffffff.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/