[PATCH 18/19] bh1770glc: Corrected proximity sensor rates

[Andi Shyti]

From: Onur Atilla <oatilla@xxxxxxxxx>

The rate table of the proximity sensor has included
one incorrect value that is not supported by the HW.
This value is now corrected from 25Hz to 20Hz. The
corresponding rate in the time table is corrected to
50ms accordingly.

Signed-off-by: Onur Atilla <oatilla@xxxxxxxxx>
Signed-off-by: Andi Shyti <andi@xxxxxxxxxxx>
---
 drivers/misc/bh1770glc.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/misc/bh1770glc.c b/drivers/misc/bh1770glc.c
index 526cdb6..ef1ab49 100644
--- a/drivers/misc/bh1770glc.c
+++ b/drivers/misc/bh1770glc.c
@@ -177,10 +177,10 @@ static const char reg_vleds[] = "Vleds";
 
 /*
  * Supported stand alone rates in ms from chip data sheet
- * {10, 20, 30, 40, 70, 100, 200, 500, 1000, 2000};
+ * {10, 20, 30, 50, 70, 100, 200, 500, 1000, 2000};
  */
-static const s16 prox_rates_hz[] = {100, 50, 33, 25, 14, 10, 5, 2};
-static const s16 prox_rates_ms[] = {10, 20, 30, 40, 70, 100, 200, 500};
+static const s16 prox_rates_hz[] = {100, 50, 33, 20, 14, 10, 5, 2};
+static const s16 prox_rates_ms[] = {10, 20, 30, 50, 70, 100, 200, 500};
 
 /* Supported IR-led currents in mA */
 static const u8 prox_curr_ma[] = {5, 10, 20, 50, 100, 150, 200};
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/