[PATCH 10/19] bh1770glc: use kstrtoul instead of strict_strtoul

[Andi Shyti]

kstrtoul() calls have been done by using base 0
up to now. This allowed hexadecimal and octal
entry on the sysfs interface.

Hexadecimal or octal entry is not required, nor
wanted for the proximity sensor.

The base is now changed to 10 in order to accept
only decimal numbers on the proximity sensor
sysfs interface.

Signed-off-by: Andi Shyti <andi@xxxxxxxxxxx>
Signed-off-by: Onur Atilla <oatilla@xxxxxxxxx>
---
 drivers/misc/bh1770glc.c |   20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/misc/bh1770glc.c b/drivers/misc/bh1770glc.c
index bd90eaf..b5fc2b9 100644
--- a/drivers/misc/bh1770glc.c
+++ b/drivers/misc/bh1770glc.c
@@ -645,7 +645,7 @@ static ssize_t bh1770_power_state_store(struct device *dev,
 	unsigned long value;
 	ssize_t ret;
 
-	if (strict_strtoul(buf, 0, &value))
+	if (kstrtoul(buf, 10, &value))
 		return -EINVAL;
 
 	mutex_lock(&chip->mutex);
@@ -744,7 +744,7 @@ static ssize_t bh1770_prox_enable_store(struct device *dev,
 	struct bh1770_chip *chip =  dev_get_drvdata(dev);
 	unsigned long value;
 
-	if (strict_strtoul(buf, 0, &value))
+	if (kstrtoul(buf, 10, &value))
 		return -EINVAL;
 
 	mutex_lock(&chip->mutex);
@@ -883,7 +883,7 @@ static ssize_t bh1770_set_prox_rate_above(struct device *dev,
 	struct bh1770_chip *chip =  dev_get_drvdata(dev);
 	unsigned long value;
 
-	if (strict_strtoul(buf, 0, &value))
+	if (kstrtoul(buf, 10, &value))
 		return -EINVAL;
 
 	mutex_lock(&chip->mutex);
@@ -899,7 +899,7 @@ static ssize_t bh1770_set_prox_rate_below(struct device *dev,
 	struct bh1770_chip *chip =  dev_get_drvdata(dev);
 	unsigned long value;
 
-	if (strict_strtoul(buf, 0, &value))
+	if (kstrtoul(buf, 10, &value))
 		return -EINVAL;
 
 	mutex_lock(&chip->mutex);
@@ -923,7 +923,7 @@ static ssize_t bh1770_set_prox_thres(struct device *dev,
 	unsigned long value;
 	int ret;
 
-	if (strict_strtoul(buf, 0, &value))
+	if (kstrtoul(buf, 10, &value))
 		return -EINVAL;
 	if (value > BH1770_PROX_RANGE)
 		return -EINVAL;
@@ -952,7 +952,7 @@ static ssize_t bh1770_prox_persistence_store(struct device *dev,
 	struct bh1770_chip *chip = dev_get_drvdata(dev);
 	unsigned long value;
 
-	if (strict_strtoul(buf, 0, &value))
+	if (kstrtoul(buf, 10, &value))
 		return -EINVAL;
 
 	if (value > BH1770_PROX_MAX_PERSISTENCE)
@@ -977,7 +977,7 @@ static ssize_t bh1770_prox_abs_thres_store(struct device *dev,
 	struct bh1770_chip *chip = dev_get_drvdata(dev);
 	unsigned long value;
 
-	if (strict_strtoul(buf, 0, &value))
+	if (kstrtoul(buf, 0, &value))
 		return -EINVAL;
 
 	if (value > BH1770_PROX_RANGE)
@@ -1022,7 +1022,7 @@ static ssize_t bh1770_lux_calib_store(struct device *dev,
 	u32 old_calib;
 	u32 new_corr;
 
-	if (strict_strtoul(buf, 0, &value))
+	if (kstrtoul(buf, 10, &value))
 		return -EINVAL;
 
 	mutex_lock(&chip->mutex);
@@ -1084,7 +1084,7 @@ static ssize_t bh1770_set_lux_rate(struct device *dev,
 	unsigned long rate_hz;
 	int ret, i;
 
-	if (strict_strtoul(buf, 0, &rate_hz))
+	if (kstrtoul(buf, 10, &rate_hz))
 		return -EINVAL;
 
 	for (i = 0; i < ARRAY_SIZE(lux_rates_hz) - 1; i++)
@@ -1122,7 +1122,7 @@ static ssize_t bh1770_set_lux_thresh(struct bh1770_chip *chip, u16 *target,
 	int ret = 0;
 	unsigned long thresh;
 
-	if (strict_strtoul(buf, 0, &thresh))
+	if (kstrtoul(buf, 10, &thresh))
 		return -EINVAL;
 
 	if (thresh > BH1770_LUX_RANGE)
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/