[ 16/48] ath9k: Use minstrel rate control by default

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

3.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx>

commit 5efac94999ff218e0101f67a059e44abb4b0b523 upstream.

The ath9k rate control algorithm has various architectural
issues that make it a poor fit in scenarios like congested
environments etc.

An example: https://bugzilla.redhat.com/show_bug.cgi?id=927191

Change the default to minstrel which is more robust in such cases.
The ath9k RC code is left in the driver for now, maybe it can
be removed altogether later on.

Signed-off-by: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx>
Cc: Jouni Malinen <jouni@xxxxxxxxxxxxxxxx>
Cc: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: John W. Linville <linville@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/net/wireless/ath/ath9k/Kconfig  |   10 +++++++---
 drivers/net/wireless/ath/ath9k/Makefile |    2 +-
 drivers/net/wireless/ath/ath9k/init.c   |    4 ----
 drivers/net/wireless/ath/ath9k/rc.h     |    2 +-
 4 files changed, 9 insertions(+), 9 deletions(-)

--- a/drivers/net/wireless/ath/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
@@ -92,13 +92,17 @@ config ATH9K_MAC_DEBUG
 	  This option enables collection of statistics for Rx/Tx status
 	  data and some other MAC related statistics
 
-config ATH9K_RATE_CONTROL
+config ATH9K_LEGACY_RATE_CONTROL
 	bool "Atheros ath9k rate control"
 	depends on ATH9K
-	default y
+	default n
 	---help---
 	  Say Y, if you want to use the ath9k specific rate control
-	  module instead of minstrel_ht.
+	  module instead of minstrel_ht. Be warned that there are various
+	  issues with the ath9k RC and minstrel is a more robust algorithm.
+	  Note that even if this option is selected, "ath9k_rate_control"
+	  has to be passed to mac80211 using the module parameter,
+	  ieee80211_default_rc_algo.
 
 config ATH9K_HTC
        tristate "Atheros HTC based wireless cards support"
--- a/drivers/net/wireless/ath/ath9k/Makefile
+++ b/drivers/net/wireless/ath/ath9k/Makefile
@@ -8,7 +8,7 @@ ath9k-y +=	beacon.o \
 		antenna.o
 
 ath9k-$(CONFIG_ATH9K_BTCOEX_SUPPORT) += mci.o
-ath9k-$(CONFIG_ATH9K_RATE_CONTROL) += rc.o
+ath9k-$(CONFIG_ATH9K_LEGACY_RATE_CONTROL) += rc.o
 ath9k-$(CONFIG_ATH9K_PCI) += pci.o
 ath9k-$(CONFIG_ATH9K_AHB) += ahb.o
 ath9k-$(CONFIG_ATH9K_DEBUGFS) += debug.o
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -808,10 +808,6 @@ void ath9k_set_hw_capab(struct ath_softc
 	sc->ant_rx = hw->wiphy->available_antennas_rx;
 	sc->ant_tx = hw->wiphy->available_antennas_tx;
 
-#ifdef CONFIG_ATH9K_RATE_CONTROL
-	hw->rate_control_algorithm = "ath9k_rate_control";
-#endif
-
 	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ)
 		hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
 			&sc->sbands[IEEE80211_BAND_2GHZ];
--- a/drivers/net/wireless/ath/ath9k/rc.h
+++ b/drivers/net/wireless/ath/ath9k/rc.h
@@ -231,7 +231,7 @@ static inline void ath_debug_stat_retrie
 }
 #endif
 
-#ifdef CONFIG_ATH9K_RATE_CONTROL
+#ifdef CONFIG_ATH9K_LEGACY_RATE_CONTROL
 int ath_rate_control_register(void);
 void ath_rate_control_unregister(void);
 #else


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/