RE: [PATCH V6 3/3] ARM: dts: Add pcie controller node for SamsungEXYNOS5440 SoC

[Jingoo Han]

On Thursday, June 20, 2013 5:04 PM, Tomasz Figa wrote:
> 
> Hi Jingoo,
> 
> On Thursday 20 of June 2013 16:12:24 Jingoo Han wrote:
> > Exynos5440 has two PCIe controllers which can be used as root complex
> > for PCIe interface.
> >
> > Signed-off-by: Jingoo Han <jg1.han@xxxxxxxxxxx>
> > ---
> >  arch/arm/boot/dts/exynos5440-ssdk5440.dts |    8 ++++++
> >  arch/arm/boot/dts/exynos5440.dtsi         |   40
> > ++++++++++++++++++++++++++++- 2 files changed, 47 insertions(+), 1
> > deletion(-)
> >
> > diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts
> > b/arch/arm/boot/dts/exynos5440-ssdk5440.dts index f32cd77..3d93804
> > 100644
> > --- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts
> > +++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
> > @@ -65,4 +65,12 @@
> >  			clock-frequency = <50000000>;
> >  		};
> >  	};
> > +
> > +	pcie0@290000 {
> > +		reset-gpio = <&pin_ctrl 5 0>;
> > +	};
> > +
> > +	pcie1@2a0000 {
> > +		reset-gpio = <&pin_ctrl 22 0>;
> > +	};
> >  };
> > diff --git a/arch/arm/boot/dts/exynos5440.dtsi
> > b/arch/arm/boot/dts/exynos5440.dtsi index 03d40c0..6295eda 100644
> > --- a/arch/arm/boot/dts/exynos5440.dtsi
> > +++ b/arch/arm/boot/dts/exynos5440.dtsi
> > @@ -126,7 +126,7 @@
> >  		clock-names = "spi", "spi_busclk0";
> >  	};
> >
> > -	pinctrl {
> > +	pin_ctrl: pinctrl {
> >  		compatible = "samsung,exynos5440-pinctrl";
> >  		reg = <0xE0000 0x1000>;
> >  		interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>,
> > @@ -230,4 +230,42 @@
> >  		clocks = <&clock 24>;
> >  		clock-names = "usbhost";
> >  	};
> 
> I think this patch should be split into two:
>  - patch adding just generlic PCIe nodes for Exynos5440,
>  - patch adding label to the pinctrl node (which is a prerequisite) and
> board-specific properties of PCIe nodes.

Do you mean the following?

1. patch adding just generlic PCIe nodes for Exynos5440
    [PATCH] ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC

arch/arm/boot/dts/exynos5440.dtsi
+
+	pcie@290000 {
+		compatible = "samsung,exynos5440-pcie";
+		reg = <0x290000 0x1000
+			0x270000 0x1000
+			0x271000 0x40>;
+		interrupts = <0 20 0>, <0 21 0>, <0 22 0>;
+		clocks = <&clock 28>, <&clock 27>;
+		clock-names = "pcie", "pcie_bus";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		ranges = <0x00000800 0 0x40000000 0x40000000 0 0x00001000   /* configuration space */
+			  0x81000000 0 0	  0x40001000 0 0x00010000   /* downstream I/O */
+			  0x82000000 0 0x40011000 0x40011000 0 0x1ffef000>; /* non-prefetchable memory */
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0x0 0 &gic 53>;
+	};
+
+	pcie@2a0000 {
+		compatible = "samsung,exynos5440-pcie";
+		reg = <0x2a0000 0x1000
+			0x272000 0x1000
+			0x271040 0x40>;
+		interrupts = <0 23 0>, <0 24 0>, <0 25 0>;
+		clocks = <&clock 29>, <&clock 27>;
+		clock-names = "pcie", "pcie_bus";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		ranges = <0x00000800 0 0x60000000 0x60000000 0 0x00001000   /* configuration space */
+			  0x81000000 0 0	  0x60001000 0 0x00010000   /* downstream I/O */
+			  0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>; /* non-prefetchable memory */
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0x0 0 &gic 56>;
+	};



2. patch adding label to the pinctrl node (which is a prerequisite) and
    board-specific properties of PCIe nodes.
   [PATCH] ARM: dts: Add pcie controller node for exynos5440-ssdk5440

arch/arm/boot/dts/exynos5440-ssdk5440.dts
+
+	pcie0@290000 {
+		reset-gpio = <&pin_ctrl 5 0>;
+	};
+
+	pcie1@2a0000 {
+		reset-gpio = <&pin_ctrl 22 0>;
+	};

arch/arm/boot/dts/exynos5440.dtsi
-	pinctrl {
+	pin_ctrl: pinctrl {



> 
> > +
> > +	pcie0@290000 {
> 
> Node naming looks incorrect here. The name should be as generic as
> possible, without any hardware-specific IDs, e.g. pcie, not pcie0. The
> @290000 suffix is enough to make the node unique.

I see. You are right.
I will fix it.


Best regards,
Jingoo Han

> 
> > +		compatible = "samsung,exynos5440-pcie";
> > +		reg = <0x290000 0x1000
> > +			0x270000 0x1000
> > +			0x271000 0x40>;
> > +		interrupts = <0 20 0>, <0 21 0>, <0 22 0>;
> > +		clocks = <&clock 28>, <&clock 27>;
> > +		clock-names = "pcie", "pcie_bus";
> > +		#address-cells = <3>;
> > +		#size-cells = <2>;
> > +		device_type = "pci";
> > +		ranges = <0x00000800 0 0x40000000 0x40000000 0 0x00001000
> /*
> > configuration space */ +			  0x81000000 0 0
> 0x40001000 0 0x00010000
> > /* downstream I/O */ +			  0x82000000 0 0x40011000
> 0x40011000 0
> > 0x1ffef000>; /* non-prefetchable memory */ +		#interrupt-cells =
> <1>;
> > +		interrupt-map-mask = <0 0 0 0>;
> > +		interrupt-map = <0x0 0 &gic 53>;
> > +	};
> > +
> > +	pcie1@2a0000 {
> 
> Same here.
> 
> Best regards,
> Tomasz
> 
> > +		compatible = "samsung,exynos5440-pcie";
> > +		reg = <0x2a0000 0x1000
> > +			0x272000 0x1000
> > +			0x271040 0x40>;
> > +		interrupts = <0 23 0>, <0 24 0>, <0 25 0>;
> > +		clocks = <&clock 29>, <&clock 27>;
> > +		clock-names = "pcie", "pcie_bus";
> > +		#address-cells = <3>;
> > +		#size-cells = <2>;
> > +		device_type = "pci";
> > +		ranges = <0x00000800 0 0x60000000 0x60000000 0 0x00001000
> /*
> > configuration space */ +			  0x81000000 0 0
> 0x60001000 0 0x00010000
> > /* downstream I/O */ +			  0x82000000 0 0x60011000
> 0x60011000 0
> > 0x1ffef000>; /* non-prefetchable memory */ +		#interrupt-cells =
> <1>;
> > +		interrupt-map-mask = <0 0 0 0>;
> > +		interrupt-map = <0x0 0 &gic 56>;
> > +	};
> >  };

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/