[RFC V1] DA9210 driver request for comments

[Steve Twiss]

From: Steve Twiss <stwiss.opensource@xxxxxxxxxxx>

The following describes the driver DA9210 from Dialog Semiconductor Ltd.

This is a request for comment relating to the Dialog DA9210 driver.
The patches have been made relative to the following kernel version:

linux-next next-20130620

This driver is for the Dialog DA9210 Multi-phase 12A DC-DC Buck
Converter controlled only from an I2C bus. It consists of a I2C device
driver which controls a synchronous 12 Amp step down converter. In this
case, the regulator component contains all parts of the driver in a
single file.

It would be appreciated if you could add any comments you may have about
the driver.

Thank you,
Steve Twiss, Dialog Semiconductor Ltd.

S Twiss (1):
  COMMIT 1: DA9210 driver files

 drivers/regulator/Kconfig                  |    7 +
 drivers/regulator/Makefile                 |    1 +
 drivers/regulator/da9210-regulator.c       |  334 ++++++++++++++++++++++++++++
 include/linux/regulator/da9210-regulator.h |  286 ++++++++++++++++++++++++
 4 files changed, 628 insertions(+), 0 deletions(-)
 create mode 100644 drivers/regulator/da9210-regulator.c
 create mode 100644 include/linux/regulator/da9210-regulator.h

-- 
end-of-patch for RFC V1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/