[PATCH V7 24/30] thermal: exynos: Fix to set the second point correction value

[Amit Daniel Kachhap]

This patch sets the second point trimming value according to the platform
data if the register value is 0.

Acked-by: Jonghwa Lee <jonghwa3.lee@xxxxxxxxxxx>
Acked-by: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
Acked-by: Eduardo Valentin <eduardo.valentin@xxxxxx>
Signed-off-by: Amit Daniel Kachhap <amit.daniel@xxxxxxxxxxx>
---
 drivers/thermal/samsung/exynos_tmu.c |   13 +++++++++----
 1 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 651f460..3fac0f9 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -180,10 +180,15 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
 	data->temp_error2 = ((trim_info >> reg->triminfo_85_shift) &
 				EXYNOS_TMU_TEMP_MASK);
 
-	if ((pdata->min_efuse_value > data->temp_error1) ||
-			(data->temp_error1 > pdata->max_efuse_value) ||
-			(data->temp_error2 != 0))
-		data->temp_error1 = pdata->efuse_value;
+	if (!data->temp_error1 ||
+		(pdata->min_efuse_value > data->temp_error1) ||
+		(data->temp_error1 > pdata->max_efuse_value))
+		data->temp_error1 = pdata->efuse_value & EXYNOS_TMU_TEMP_MASK;
+
+	if (!data->temp_error2)
+		data->temp_error2 =
+			(pdata->efuse_value >> reg->triminfo_85_shift) &
+			EXYNOS_TMU_TEMP_MASK;
 
 	if (pdata->max_trigger_level > MAX_THRESHOLD_LEVS) {
 		dev_err(&pdev->dev, "Invalid max trigger level\n");
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/