[PATCH v3 2/3] regulator: max8998: Use arrays for specifying voltagesin platform data
From: Tomasz Figa
Date: Mon Jun 24 2013 - 08:42:00 EST
This patch modifies the platform data of max8998 to use arrays for
specifying predefined voltages of buck1 and buck2 instead of separate
field for each voltage.
This allows to simplify the code a bit and will help in adding support
for Device Tree, which will be introduced in further patch.
Signed-off-by: Tomasz Figa <t.figa@xxxxxxxxxxx>
---
arch/arm/mach-exynos/mach-universal_c210.c | 8 +--
arch/arm/mach-s5pv210/mach-aquila.c | 8 +--
arch/arm/mach-s5pv210/mach-goni.c | 8 +--
drivers/regulator/max8998.c | 96 +++++++++---------------------
include/linux/mfd/max8998.h | 16 ++---
5 files changed, 39 insertions(+), 97 deletions(-)
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 74ddb2b5..f912444 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -540,15 +540,11 @@ static struct max8998_regulator_data lp3974_regulators[] = {
static struct max8998_platform_data universal_lp3974_pdata = {
.num_regulators = ARRAY_SIZE(lp3974_regulators),
.regulators = lp3974_regulators,
- .buck1_voltage1 = 1100000, /* INT */
- .buck1_voltage2 = 1000000,
- .buck1_voltage3 = 1100000,
- .buck1_voltage4 = 1000000,
+ .buck1_voltage = { 1100000, 1000000, 1100000, 1000000 },
.buck1_set1 = EXYNOS4_GPX0(5),
.buck1_set2 = EXYNOS4_GPX0(6),
- .buck2_voltage1 = 1200000, /* G3D */
- .buck2_voltage2 = 1100000,
.buck1_default_idx = 0,
+ .buck2_voltage = { 1200000, 1100000 },
.buck2_set3 = EXYNOS4_GPE2(0),
.buck2_default_idx = 0,
.wakeup = true,
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index ed2b854..ad40ab0 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -377,12 +377,8 @@ static struct max8998_platform_data aquila_max8998_pdata = {
.buck1_set1 = S5PV210_GPH0(3),
.buck1_set2 = S5PV210_GPH0(4),
.buck2_set3 = S5PV210_GPH0(5),
- .buck1_voltage1 = 1200000,
- .buck1_voltage2 = 1200000,
- .buck1_voltage3 = 1200000,
- .buck1_voltage4 = 1200000,
- .buck2_voltage1 = 1200000,
- .buck2_voltage2 = 1200000,
+ .buck1_voltage = { 1200000, 1200000, 1200000, 1200000 },
+ .buck2_voltage = { 1200000, 1200000 },
};
#endif
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 30b24ad..e5cd9fb 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -580,12 +580,8 @@ static struct max8998_platform_data goni_max8998_pdata = {
.buck1_set1 = S5PV210_GPH0(3),
.buck1_set2 = S5PV210_GPH0(4),
.buck2_set3 = S5PV210_GPH0(5),
- .buck1_voltage1 = 1200000,
- .buck1_voltage2 = 1200000,
- .buck1_voltage3 = 1200000,
- .buck1_voltage4 = 1200000,
- .buck2_voltage1 = 1200000,
- .buck2_voltage2 = 1200000,
+ .buck1_voltage = { 1200000, 1200000, 1200000, 1200000 },
+ .buck2_voltage = { 1200000, 1200000 },
};
#endif
diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c
index a57a1b1..8c45b93 100644
--- a/drivers/regulator/max8998.c
+++ b/drivers/regulator/max8998.c
@@ -630,6 +630,7 @@ static int max8998_pmic_probe(struct platform_device *pdev)
struct max8998_data *max8998;
struct i2c_client *i2c;
int i, ret, size;
+ unsigned int v;
if (!pdata) {
dev_err(pdev->dev.parent, "No platform init data supplied\n");
@@ -688,53 +689,21 @@ static int max8998_pmic_probe(struct platform_device *pdev)
gpio_request(pdata->buck1_set2, "MAX8998 BUCK1_SET2");
gpio_direction_output(pdata->buck1_set2,
(max8998->buck1_idx >> 1) & 0x1);
- /* Set predefined value for BUCK1 register 1 */
- i = 0;
- while (buck12_voltage_map_desc.min +
- buck12_voltage_map_desc.step*i
- < pdata->buck1_voltage1)
- i++;
- max8998->buck1_vol[0] = i;
- ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE1, i);
- if (ret)
- goto err_out;
-
- /* Set predefined value for BUCK1 register 2 */
- i = 0;
- while (buck12_voltage_map_desc.min +
- buck12_voltage_map_desc.step*i
- < pdata->buck1_voltage2)
- i++;
-
- max8998->buck1_vol[1] = i;
- ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE2, i);
- if (ret)
- goto err_out;
-
- /* Set predefined value for BUCK1 register 3 */
- i = 0;
- while (buck12_voltage_map_desc.min +
- buck12_voltage_map_desc.step*i
- < pdata->buck1_voltage3)
- i++;
-
- max8998->buck1_vol[2] = i;
- ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE3, i);
- if (ret)
- goto err_out;
-
- /* Set predefined value for BUCK1 register 4 */
- i = 0;
- while (buck12_voltage_map_desc.min +
- buck12_voltage_map_desc.step*i
- < pdata->buck1_voltage4)
- i++;
-
- max8998->buck1_vol[3] = i;
- ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE4, i);
- if (ret)
- goto err_out;
+ /* Set predefined values for BUCK1 registers */
+ for (v = 0; v < ARRAY_SIZE(pdata->buck1_voltage); ++v) {
+ i = 0;
+ while (buck12_voltage_map_desc.min +
+ buck12_voltage_map_desc.step*i
+ < pdata->buck1_voltage[v])
+ i++;
+
+ max8998->buck1_vol[v] = i;
+ ret = max8998_write_reg(i2c,
+ MAX8998_REG_BUCK1_VOLTAGE1 + v, i);
+ if (ret)
+ goto err_out;
+ }
}
if (gpio_is_valid(pdata->buck2_set3)) {
@@ -750,27 +719,20 @@ static int max8998_pmic_probe(struct platform_device *pdev)
gpio_direction_output(pdata->buck2_set3,
max8998->buck2_idx & 0x1);
- /* BUCK2 register 1 */
- i = 0;
- while (buck12_voltage_map_desc.min +
- buck12_voltage_map_desc.step*i
- < pdata->buck2_voltage1)
- i++;
- max8998->buck2_vol[0] = i;
- ret = max8998_write_reg(i2c, MAX8998_REG_BUCK2_VOLTAGE1, i);
- if (ret)
- goto err_out;
-
- /* BUCK2 register 2 */
- i = 0;
- while (buck12_voltage_map_desc.min +
- buck12_voltage_map_desc.step*i
- < pdata->buck2_voltage2)
- i++;
- max8998->buck2_vol[1] = i;
- ret = max8998_write_reg(i2c, MAX8998_REG_BUCK2_VOLTAGE2, i);
- if (ret)
- goto err_out;
+ /* Set predefined values for BUCK2 registers */
+ for (v = 0; v < ARRAY_SIZE(pdata->buck2_voltage); ++v) {
+ i = 0;
+ while (buck12_voltage_map_desc.min +
+ buck12_voltage_map_desc.step*i
+ < pdata->buck2_voltage[v])
+ i++;
+
+ max8998->buck2_vol[v] = i;
+ ret = max8998_write_reg(i2c,
+ MAX8998_REG_BUCK2_VOLTAGE1 + v, i);
+ if (ret)
+ goto err_out;
+ }
}
for (i = 0; i < pdata->num_regulators; i++) {
diff --git a/include/linux/mfd/max8998.h b/include/linux/mfd/max8998.h
index 7547118..ca56bb0 100644
--- a/include/linux/mfd/max8998.h
+++ b/include/linux/mfd/max8998.h
@@ -73,12 +73,8 @@ struct max8998_regulator_data {
* @buck_voltage_lock: Do NOT change the values of the following six
* registers set by buck?_voltage?. The voltage of BUCK1/2 cannot
* be other than the preset values.
- * @buck1_voltage1: BUCK1 DVS mode 1 voltage register
- * @buck1_voltage2: BUCK1 DVS mode 2 voltage register
- * @buck1_voltage3: BUCK1 DVS mode 3 voltage register
- * @buck1_voltage4: BUCK1 DVS mode 4 voltage register
- * @buck2_voltage1: BUCK2 DVS mode 1 voltage register
- * @buck2_voltage2: BUCK2 DVS mode 2 voltage register
+ * @buck1_voltage: BUCK1 DVS mode 1 voltage registers
+ * @buck2_voltage: BUCK2 DVS mode 2 voltage registers
* @buck1_set1: BUCK1 gpio pin 1 to set output voltage
* @buck1_set2: BUCK1 gpio pin 2 to set output voltage
* @buck1_default_idx: Default for BUCK1 gpio pin 1, 2
@@ -103,12 +99,8 @@ struct max8998_platform_data {
unsigned int irq_base;
int ono;
bool buck_voltage_lock;
- int buck1_voltage1;
- int buck1_voltage2;
- int buck1_voltage3;
- int buck1_voltage4;
- int buck2_voltage1;
- int buck2_voltage2;
+ int buck1_voltage[4];
+ int buck2_voltage[2];
int buck1_set1;
int buck1_set2;
int buck1_default_idx;
--
1.8.2.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/