Re: [PATCH 2/2] Make non-linear GPIO ranges accesible from gpiolib

[Linus Walleij]

On Tue, Jun 25, 2013 at 5:31 PM, Stephen Warren <swarren@xxxxxxxxxxxxx> wrote:
> On 06/25/2013 08:56 AM, Linus Walleij wrote:
>> On Fri, Jun 21, 2013 at 11:17 PM, Stephen Warren <swarren@xxxxxxxxxxxxx> wrote:
>>> On 06/20/2013 05:57 AM, Christian Ruppert wrote:
>>
>>>> Your remark seems to reflect one of the following two hardware
>>>> architectures:
>>>>
>>>>                                                      +- SPI
>>>>                  Physical pins --- GPIO --- pinctrl -+- I2C
>>>>                                                      +- mmc
>>>
>>> (that's diagram 1)
>>>
>>>>
>>>>                                 +- GPIO
>>>>                  Physical pins -+           +- SPI
>>>>                                 +- pinctrl -+- I2C
>>>>                                             +- mmc
>>>
>>> (that's diagram 2)
>>>
>>>> TB10x hardware architecture:
>>>>
>>>>                                             +- SPI
>>>>                  Physical pins --- pinctrl -+- I2C
>>>>                                             +- mmc
>>>>                                             +- GPIO
>>>
>>> (that's diagram 3)
>>>
>>> No, I was thinking of diagram 3 above. I'm not sure if diagrams (1) or
>>> (2) are common or exist?
>>
>> The U300 pin controller is obviously of type (1) as it can spy on
>> the signals.
>
> U300 HW might be diagram (1) - I can't say since I'm not familiar with
> the HW. However, the fact that GPIO can spy on signals in no way at all
> implies that the HW must conform to diagram (1).

That's true. And I don't know what it actually is in this case.
That hardware is actually weird in many ways, thanks to
helpful HW engineers modeling use cases into the HW.

>> The Nomadik pin controller is basically type (2).

This I know however to be true, as I have access to the
low-level schematics of the ASIC.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/