[PATCH] pch_uart: Use DMI interface for board detection

[Darren Hart]

Use the DMI interface rather than manually matching DMI strings.

Signed-off-by: Darren Hart <dvhart@xxxxxxxxxxxxxxx>
---
 drivers/tty/serial/pch_uart.c | 71
+++++++++++++++++++++++++++++--------------
 1 file changed, 49 insertions(+), 22 deletions(-)

diff --git a/drivers/tty/serial/pch_uart.c
b/drivers/tty/serial/pch_uart.c
index 572d481..271cc73 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -373,35 +373,62 @@ static const struct file_operations port_regs_ops
= {
 };
 #endif	/* CONFIG_DEBUG_FS */
 
+static struct dmi_system_id __initdata pch_uart_dmi_table[] = {
+	{
+		.ident = "CM-iTC",
+		{
+			DMI_MATCH(DMI_BOARD_NAME, "CM-iTC"),
+		},
+		(void *)CMITC_UARTCLK,
+	},
+	{
+		.ident = "FRI2",
+		{
+			DMI_MATCH(DMI_BIOS_VERSION, "FRI2"),
+		},
+		(void *)FRI2_64_UARTCLK,
+	},
+	{
+		.ident = "Fish River Island II",
+		{
+			DMI_MATCH(DMI_PRODUCT_NAME, "Fish River Island II"),
+		},
+		(void *)FRI2_48_UARTCLK,
+	},
+	{
+		.ident = "COMe-mTT",
+		{
+			DMI_MATCH(DMI_BOARD_NAME, "COMe-mTT"),
+		},
+		(void *)NTC1_UARTCLK,
+	},
+	{
+		.ident = "nanoETXexpress-TT",
+		{
+			DMI_MATCH(DMI_BOARD_NAME, "nanoETXexpress-TT"),
+		},
+		(void *)NTC1_UARTCLK,
+	},
+	{
+		.ident = "MinnowBoard",
+		{
+			DMI_MATCH(DMI_BOARD_NAME, "MinnowBoard"),
+		},
+		(void *)MINNOW_UARTCLK,
+	},
+};
+
 /* Return UART clock, checking for board specific clocks. */
 static int pch_uart_get_uartclk(void)
 {
-	const char *cmp;
+	const struct dmi_system_id *d;
 
 	if (user_uartclk)
 		return user_uartclk;
 
-	cmp = dmi_get_system_info(DMI_BOARD_NAME);
-	if (cmp && strstr(cmp, "CM-iTC"))
-		return CMITC_UARTCLK;
-
-	cmp = dmi_get_system_info(DMI_BIOS_VERSION);
-	if (cmp && strnstr(cmp, "FRI2", 4))
-		return FRI2_64_UARTCLK;
-
-	cmp = dmi_get_system_info(DMI_PRODUCT_NAME);
-	if (cmp && strstr(cmp, "Fish River Island II"))
-		return FRI2_48_UARTCLK;
-
-	/* Kontron COMe-mTT10 (nanoETXexpress-TT) */
-	cmp = dmi_get_system_info(DMI_BOARD_NAME);
-	if (cmp && (strstr(cmp, "COMe-mTT") ||
-		    strstr(cmp, "nanoETXexpress-TT")))
-		return NTC1_UARTCLK;
-
-	cmp = dmi_get_system_info(DMI_BOARD_NAME);
-	if (cmp && strstr(cmp, "MinnowBoard"))
-		return MINNOW_UARTCLK;
+	d = dmi_first_match(pch_uart_dmi_table);
+	if (d)
+		return (int)d->driver_data;
 
 	return DEFAULT_UARTCLK;
 }
-- 
1.8.1.2



-- 
Darren Hart
Intel Open Source Technology Center
Yocto Project - Technical Lead - Linux Kernel

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/