Re: linux-next: Tree for Jun 26 [ vfs | block | fuse (cpuidle)releated? ]

From: Sedat Dilek
Date: Wed Jun 26 2013 - 10:51:10 EST

Next message: Steven Rostedt: "Re: [PATCH v2 15/45] rcu: Use get/put_online_cpus_atomic() toprevent CPU offline"
Previous message: Peter Zijlstra: "Re: [Patch v5 0/9] liblockdep: userspace lockdep"
In reply to: Sedat Dilek: "Re: linux-next: Tree for Jun 26 [ vfs | block | fuse (cpuidle)releated? ]"
Next in thread: Thomas Petazzoni: "Re: linux-next: Tree for Jun 26 [ vfs | block | fuse (cpuidle)releated? ]"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Wed, Jun 26, 2013 at 11:48 AM, Sedat Dilek <sedat.dilek@xxxxxxxxx> wrote:
> On Wed, Jun 26, 2013 at 10:06 AM, Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx> wrote:
>> Hi all,
>>
>> Changes since 20130625:
>>
>> New tree: cpuinit
>>
>> The arm-mpidr tree gained a conflict against the arm tree.
>>
>> The net-next tree gained a conflict against the pm tree and a build
>> failure for which I reverted a commit.
>>
>> The drm-intel tree gained a conflict against Linus' tree.
>>
>> The pinctrl tree gained a conflict against the regmap tree.
>>
>> The akpm tree lost a patch that turned up elsewhere and gained a conflict
>> against the powerpc tree.
>>
>> The cpuinit tree lost a patch that turned up in the arc tree and gained a
>> conflict against the arm-current tree.
>>
>> ----------------------------------------------------------------------------
>>
>
> [ CC some vfs | block | fuse maintainers ]
>
> Since yesterday (next-20130625) and today (next-20130626) I can NOT
> boot into my -next kernels.
>
> I have seen two traces whereas I would like to concentrate on Trace #1.
>
> Trace #1 (noted manually, read from the screen):
> ...
> general_protection
> spin_dump
> spin_bug
> do_raw_spin_lock
> _raw_spin_locking
> rwsem_spin_locking
> rwsem_downwrite_failed
> _rwsem_downwrite_failed
> call_rwsem_downwrite_failed
> downwrite
> fuse_kill_sb_blk
> deactivate_locked_super
> mount_bdev
> fuse_iget
> fuse_mountblk
> mount_fs
> vfs_kern_mount
> do_mount
> __get_free_pages
> copy_mount_options
> SyS_mount
> tracesys
>
> Trace #2 (noted manually, read from the screen):
> ...
> blablabla cpuidle
> ...
> arch_trigger_all_cpu_backtrace_handler
>
> I have attached my kernel-config.
>
> Any hints/feedback welcome!
>

[ TO/CC char-misc folks ]

The CULPRIT commit [1] due to my git-bisecting is:

commit 585d98e00ba7a5e2abe65f7a1eff631cb612289b
"char: misc: assign file->private_data in all cases"

After reverting it, my system boots up fine again.

Can someone from the char-misc folks look at that?
Thanks.

NOTE: You also need [PATCH] Revert "kconfig: fix randomising choice
entries in presence of KCONFIG_ALLCONFIG".

- Sedat -

[1] http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/commit/?id=585d98e00ba7a5e2abe65f7a1eff631cb612289b

> Regards,
> - Sedat -
wearefam@fambox:~/src/linux-kernel/linux-next$ git bisect good
585d98e00ba7a5e2abe65f7a1eff631cb612289b is the first bad commit
commit 585d98e00ba7a5e2abe65f7a1eff631cb612289b
Author: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
Date: Fri Jun 21 15:01:05 2013 +0200

char: misc: assign file->private_data in all cases

In fa1f68db6ca ("drivers: misc: pass miscdevice pointer via file
private data"), the misc driver infrastructure was changed to assigned
file->private_data as a pointer to the 'struct miscdevice' that
corresponds to the device being opened.

However, this assignment was only done when the misc driver was
declaring a driver-specific ->open() operation in its
file_operations. This doesn't make sense, as the driver may not
necessarily have a custom ->open() operation, and might still be
interested in having file->private_data properly set for use in its
->read() and write() operations.

Therefore, we move the assignment of file->private_data outside of the
condition that tests whether a driver-specific ->open() operation was
defined.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
Acked-by: Arnd Bergmann <arnd@xxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

:040000 040000 9e6f8608cbf47a345beb5fbba1f6341df3634269 7d1bbea06d1c0dc77e4bdf31368131776462c575 M drivers
wearefam@fambox:~/src/linux-kernel/linux-next$

-dileks // 26-Jun-2013
git bisect start
# good: [9e895ace5d82df8929b16f58e9f515f6d54ab82d] Linux 3.10-rc7
git bisect good 9e895ace5d82df8929b16f58e9f515f6d54ab82d
# good: [f63eed2c690b88aed2bdb6bb670d38aa328cd3c5] Merge remote-tracking branch 'vfs/for-next'
git bisect good f63eed2c690b88aed2bdb6bb670d38aa328cd3c5
# good: [27617408606e7b87d77b80236ed6d005ed9e7553] Revert "kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG"
git bisect good 27617408606e7b87d77b80236ed6d005ed9e7553
# good: [d4b148f8a4eac4e713734d589e7be5712f00ed43] Merge remote-tracking branch 'spi-mb/for-next'
git bisect good d4b148f8a4eac4e713734d589e7be5712f00ed43
# good: [10347bd05ddca4cc46de4751afefe3287611df9b] Revert "kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG"
git bisect good 10347bd05ddca4cc46de4751afefe3287611df9b
# good: [c7406d317e60bc98a49c06113b05c10791584567] Merge remote-tracking branch 'staging/staging-next'
git bisect good c7406d317e60bc98a49c06113b05c10791584567
# good: [59f26c0311cb5b5959aa43f0092f705c83cb087b] Merge branch 'next/dt' into for-next
git bisect good 59f26c0311cb5b5959aa43f0092f705c83cb087b
# bad: [4ad5382a5c7ccb62eeeb2a3729647c57a5bf33e1] Merge remote-tracking branch 'arm64-hugepages/for-next/hugepages'
git bisect bad 4ad5382a5c7ccb62eeeb2a3729647c57a5bf33e1
# good: [8ad9b65d55a7ae008118cf2ae631cb482114d5ab] Merge branch 'next/fixes-non-critical' into HEAD
git bisect good 8ad9b65d55a7ae008118cf2ae631cb482114d5ab
# bad: [6b34d3f91bb15d86176a5133583e7e09c3a3e4a5] Revert "kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG"
git bisect bad 6b34d3f91bb15d86176a5133583e7e09c3a3e4a5
# bad: [4dfad84583cc5c6327b9a299b5938a55ed078d2f] Revert "kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG"
git bisect bad 4dfad84583cc5c6327b9a299b5938a55ed078d2f
# good: [71811f3271cd986e223be44830e5961056561ac3] drivers: char: mem: use IS_ERR_VALUE() in memory_lseek()
git bisect good 71811f3271cd986e223be44830e5961056561ac3
# good: [d777f98bfa44e5a2748603276e9e9fb6ab999079] memory: tegra20-mc: Fix hang in IRQ handler.
git bisect good d777f98bfa44e5a2748603276e9e9fb6ab999079
# good: [c2955da0e101c3432ae21945e5d77786adf1f094] fmc: avoid readl/writel namespace conflict
git bisect good c2955da0e101c3432ae21945e5d77786adf1f094
# bad: [077797117dfa209717e1f3f1416c1101c0e047f0] drivers: uio_dmem_genirq: Use of_match_ptr() macro
git bisect bad 077797117dfa209717e1f3f1416c1101c0e047f0
# good: [e91e84fa4cfeb67a9a096f1adaa1a1a692474724] drivers: hv: check interrupt mask before read_index
git bisect good e91e84fa4cfeb67a9a096f1adaa1a1a692474724
# bad: [585d98e00ba7a5e2abe65f7a1eff631cb612289b] char: misc: assign file->private_data in all cases
git bisect bad 585d98e00ba7a5e2abe65f7a1eff631cb612289b
# good: [2608fb653103419ac163206ff6d51b7b6528e2d9] drivers: hv: allocate synic structures before hv_synic_init()
git bisect good 2608fb653103419ac163206ff6d51b7b6528e2d9
# first bad commit: [585d98e00ba7a5e2abe65f7a1eff631cb612289b] char: misc: assign file->private_data in all cases

Attachment: 3.10.0-rc7-next20130625-2-iniza-small.patch
Description: Binary data

Attachment: config-3.10.0-rc7-next20130625-2-iniza-small
Description: Binary data

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.0-rc7-next20130625-2-iniza-small (sedat.dilek@xxxxxxxxx@fambox) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP Wed Jun 26 16:43:28 CEST 2013
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz.next root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000d9c9efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d9c9f000-0x00000000dae7efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dae7f000-0x00000000daf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0DB000000 mask FFF000000 uncachable
[ 0.000000] 5 base 100000000 mask FE0000000 write-back
[ 0.000000] 6 base 11FE00000 mask FFFE00000 uncachable
[ 0.000000] 7 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f00e0-0x000f00ef] mapped at [ffff8800000f00e0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x0204a000, 0x0204afff] PGTABLE
[ 0.000000] BRK [0x0204b000, 0x0204bfff] PGTABLE
[ 0.000000] BRK [0x0204c000, 0x0204cfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x11fc00000-0x11fdfffff]
[ 0.000000] [mem 0x11fc00000-0x11fdfffff] page 2M
[ 0.000000] BRK [0x0204d000, 0x0204dfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11fbfffff]
[ 0.000000] [mem 0x11c000000-0x11fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
[ 0.000000] [mem 0x100000000-0x11bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x40200000-0xd9c9efff]
[ 0.000000] [mem 0x40200000-0xd9bfffff] page 2M
[ 0.000000] [mem 0xd9c00000-0xd9c9efff] page 4k
[ 0.000000] BRK [0x0204e000, 0x0204efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xdafff000-0xdaffffff]
[ 0.000000] [mem 0xdafff000-0xdaffffff] page 4k
[ 0.000000] RAMDISK: [mem 0x37966000-0x37caafff]
[ 0.000000] ACPI: RSDP 00000000000f0100 00024 (v02 SECCSD)
[ 0.000000] ACPI: XSDT 00000000daffe170 0008C (v01 SECCSD LH43STAR 00000002 PTEC 00000002)
[ 0.000000] ACPI: FACP 00000000dafef000 0010C (v05 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: DSDT 00000000daff2000 083AC (v02 SECCSD SNB-CPT 00000000 INTL 20061109)
[ 0.000000] ACPI: FACS 00000000daf47000 00040
[ 0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001)
[ 0.000000] ACPI: SSDT 00000000daffb000 01068 (v01 SECCSD PtidDevc 00001000 INTL 20061109)
[ 0.000000] ACPI: ASF! 00000000daff1000 000A5 (v32 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: HPET 00000000dafee000 00038 (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: APIC 00000000dafed000 00098 (v03 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: MCFG 00000000dafec000 0003C (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: SSDT 00000000dafeb000 00804 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000dafea000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: UEFI 00000000dafe9000 0003E (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000dafe8000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: UEFI 00000000dafe7000 0026A (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: SSDT 00000000dafe6000 000D0 (v01 Iffs IffsAsl 00003000 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fdfffff]
[ 0.000000] NODE_DATA [mem 0x11fdf7000-0x11fdfbfff]
[ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011b400000-ffff88011edfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x11fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
[ 0.000000] node 0: [mem 0x40200000-0xd9c9efff]
[ 0.000000] node 0: [mem 0xdafff000-0xdaffffff]
[ 0.000000] node 0: [mem 0x100000000-0x11fdfffff]
[ 0.000000] On node 0 totalpages: 1021500
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 156 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12127 pages used for memmap
[ 0.000000] DMA32 zone: 886944 pages, LIFO batch:31
[ 0.000000] Normal zone: 1785 pages used for memmap
[ 0.000000] Normal zone: 130560 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd9c9f000-0xdae7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdae7f000-0xdaf9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88011fa00000 s87680 r8192 d22912 u262144
[ 0.000000] pcpu-alloc: s87680 r8192 d22912 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1007376
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz.next root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3938476K/4086000K available (7096K kernel code, 1042K rwdata, 3120K rodata, 1328K init, 1984K bss, 147524K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] ODEBUG: 0 of 0 active objects replaced
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 1596.399 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.79 BogoMIPS (lpj=6385596)
[ 0.000080] pid_max: default: 32768 minimum: 301
[ 0.000245] Security Framework initialized
[ 0.000303] AppArmor: AppArmor initialized
[ 0.000339] Yama: becoming mindful.
[ 0.000752] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001863] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.002363] Mount-cache hash table entries: 256
[ 0.002921] Initializing cgroup subsys memory
[ 0.003019] Initializing cgroup subsys devices
[ 0.003057] Initializing cgroup subsys freezer
[ 0.003095] Initializing cgroup subsys blkio
[ 0.003132] Initializing cgroup subsys perf_event
[ 0.003172] Initializing cgroup subsys hugetlb
[ 0.003258] Disabled fast string operations
[ 0.003295] CPU: Physical Processor ID: 0
[ 0.003331] CPU: Processor Core ID: 0
[ 0.003370] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.003370] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.003436] mce: CPU supports 7 MCE banks
[ 0.003487] CPU0: Thermal monitoring enabled (TM1)
[ 0.003532] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[ 0.003532] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.003532] tlb_flushall_shift: 5
[ 0.003704] Freeing SMP alternatives memory: 24K (ffffffff81e52000 - ffffffff81e58000)
[ 0.004789] ACPI: Core revision 20130517
[ 0.015488] ACPI: All ACPI Tables successfully acquired
[ 0.029486] ftrace: allocating 26865 entries in 105 pages
[ 0.045213] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.084912] smpboot: CPU0: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz (fam: 06, model: 2a, stepping: 07)
[ 0.085525] TSC deadline timer enabled
[ 0.085538] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.085666] ... version: 3
[ 0.085702] ... bit width: 48
[ 0.085738] ... generic registers: 4
[ 0.085775] ... value mask: 0000ffffffffffff
[ 0.085813] ... max period: 000000007fffffff
[ 0.085851] ... fixed-purpose events: 3
[ 0.085887] ... event mask: 000000070000000f
[ 0.099095] Disabled fast string operations
[ 0.102282] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.113959] Disabled fast string operations
[ 0.127667] Disabled fast string operations
[ 0.088008] smpboot: Booting Node 0, Processors #1 #2 #3
[ 0.129801] Brought up 4 CPUs
[ 0.129904] smpboot: Total of 4 processors activated (12771.19 BogoMIPS)
[ 0.133979] devtmpfs: initialized
[ 0.136017] EVM: security.selinux
[ 0.136053] EVM: security.SMACK64
[ 0.136087] EVM: security.capability
[ 0.136209] PM: Registering ACPI NVS region [mem 0xdae7f000-0xdaf9efff] (1179648 bytes)
[ 0.137742] regulator-dummy: no parameters
[ 0.137937] NET: Registered protocol family 16
[ 0.138312] ACPI: bus type PCI registered
[ 0.138463] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.138523] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.145300] PCI: Using configuration type 1 for base access
[ 0.148669] bio: create slab <bio-0> at 0
[ 0.149122] ACPI: Added _OSI(Module Device)
[ 0.149161] ACPI: Added _OSI(Processor Device)
[ 0.149198] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.149236] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.151017] ACPI: EC: Look up EC in DSDT
[ 0.177627] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.183572] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.195382] ACPI: SSDT 00000000dae70718 00688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.195970] ACPI: Dynamic OEM Table Load:
[ 0.196041] ACPI: SSDT (null) 00688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.206054] ACPI: SSDT 00000000dae71a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.206722] ACPI: Dynamic OEM Table Load:
[ 0.206792] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.218010] ACPI: SSDT 00000000dae6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.218572] ACPI: Dynamic OEM Table Load:
[ 0.218641] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.232066] ACPI: Interpreter enabled
[ 0.232116] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[ 0.232225] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.232262] ACPI: Using IOAPIC for interrupt routing
[ 0.232356] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.232584] ACPI: No dock devices found.
[ 0.256129] ACPI: Power Resource [FN00] (off)
[ 0.256348] ACPI: Power Resource [FN01] (off)
[ 0.256563] ACPI: Power Resource [FN02] (off)
[ 0.256778] ACPI: Power Resource [FN03] (off)
[ 0.256994] ACPI: Power Resource [FN04] (off)
[ 0.258170] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.258544] \_SB_.PCI0:_OSC invalid UUID
[ 0.258545] _OSC request data:1 8 0
[ 0.259498] PCI host bridge to bus 0000:00
[ 0.259538] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.259578] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.259619] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.259660] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.259702] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[ 0.259743] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 0.259800] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.259954] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[ 0.259967] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.259974] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.259980] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.260173] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.260199] pci 0000:00:16.0: reg 0x10: [mem 0xf0705000-0xf070500f 64bit]
[ 0.260285] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.260443] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.260467] pci 0000:00:1a.0: reg 0x10: [mem 0xf070a000-0xf070a3ff]
[ 0.260568] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.260673] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.260692] pci 0000:00:1b.0: reg 0x10: [mem 0xf0700000-0xf0703fff 64bit]
[ 0.260771] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.260818] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.260924] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.261015] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.261064] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.261172] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.261262] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.261319] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.261426] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 0.261516] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.261646] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.261670] pci 0000:00:1d.0: reg 0x10: [mem 0xf0709000-0xf07093ff]
[ 0.261771] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.261882] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[ 0.262078] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 0.262100] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f]
[ 0.262109] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097]
[ 0.262119] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087]
[ 0.262129] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093]
[ 0.262139] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.262149] pci 0000:00:1f.2: reg 0x24: [mem 0xf0708000-0xf07087ff]
[ 0.262202] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.262319] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.262337] pci 0000:00:1f.3: reg 0x10: [mem 0xf0704000-0xf07040ff 64bit]
[ 0.262361] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.262732] pci 0000:01:00.0: [8086:0091] type 00 class 0x028000
[ 0.262913] pci 0000:01:00.0: reg 0x10: [mem 0xf0600000-0xf0601fff 64bit]
[ 0.263649] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.263820] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.269963] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.270007] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff]
[ 0.270187] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.270257] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.270380] pci 0000:02:00.0: reg 0x18: [mem 0xf0404000-0xf0404fff 64bit pref]
[ 0.270456] pci 0000:02:00.0: reg 0x20: [mem 0xf0400000-0xf0403fff 64bit pref]
[ 0.270790] pci 0000:02:00.0: supports D1 D2
[ 0.270792] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.270919] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.277897] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.277958] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.277968] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.278093] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.278132] pci 0000:03:00.0: reg 0x10: [mem 0xf0500000-0xf0507fff 64bit]
[ 0.278331] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.285867] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.285943] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.286126] \_SB_.PCI0:_OSC invalid UUID
[ 0.286128] _OSC request data:1 1f 0
[ 0.286132] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.286188] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.287139] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.287487] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.287880] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.288225] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.288569] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[ 0.288942] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.289333] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.289680] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[ 0.290563] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.290640] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.290703] Found 1 acpi root devices
[ 0.290773] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.291128] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.291187] vgaarb: loaded
[ 0.291221] vgaarb: bridge control possible 0000:00:02.0
[ 0.291932] SCSI subsystem initialized
[ 0.291970] ACPI: bus type ATA registered
[ 0.292104] libata version 3.00 loaded.
[ 0.292167] ACPI: bus type USB registered
[ 0.292248] usbcore: registered new interface driver usbfs
[ 0.292308] usbcore: registered new interface driver hub
[ 0.292401] usbcore: registered new device driver usb
[ 0.292759] PCI: Using ACPI for IRQ routing
[ 0.294487] PCI: pci_cache_line_size set to 64 bytes
[ 0.294601] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.294604] e820: reserve RAM buffer [mem 0xd9c9f000-0xdbffffff]
[ 0.294606] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[ 0.294608] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff]
[ 0.294883] NetLabel: Initializing
[ 0.294919] NetLabel: domain hash size = 128
[ 0.294956] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.295038] NetLabel: unlabeled traffic allowed by default
[ 0.295164] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.295354] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.297416] Switched to clocksource hpet
[ 0.314989] AppArmor: AppArmor Filesystem Enabled
[ 0.315085] pnp: PnP ACPI init
[ 0.315136] ACPI: bus type PNP registered
[ 0.315601] pnp 00:00: [dma 4]
[ 0.315641] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.315688] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.315855] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.315909] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.315988] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.316030] system 00:04: [io 0x1000-0x100f] has been reserved
[ 0.316071] system 00:04: [io 0x5000-0x5003] has been reserved
[ 0.316111] system 00:04: [io 0xffff] has been reserved
[ 0.316151] system 00:04: [io 0x0400-0x0453] could not be reserved
[ 0.316193] system 00:04: [io 0x0458-0x047f] has been reserved
[ 0.316233] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.316273] system 00:04: [io 0x0a00-0x0a0f] has been reserved
[ 0.316314] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.316355] system 00:04: [io 0x5000-0x500f] could not be reserved
[ 0.316397] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.316445] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.316540] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.316583] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.316642] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.316726] pnp 00:08: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
[ 0.317030] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.317073] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.317115] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.317156] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.317198] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.317240] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.317281] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.317323] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.317366] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.317419] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.317463] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.318157] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.318197] pnp: PnP ACPI: found 11 devices
[ 0.318234] ACPI: bus type PNP unregistered
[ 0.326325] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.326370] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff]
[ 0.326421] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.326461] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.326509] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.326569] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.326612] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.327082] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.327084] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.327086] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.327088] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff]
[ 0.327090] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.327092] pci_bus 0000:01: resource 1 [mem 0xf0600000-0xf06fffff]
[ 0.327095] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.327097] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.327099] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff]
[ 0.327233] NET: Registered protocol family 2
[ 0.327641] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.327880] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
[ 0.328214] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.328513] TCP: reno registered
[ 0.328567] UDP hash table entries: 2048 (order: 5, 196608 bytes)
[ 0.328671] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
[ 0.328965] NET: Registered protocol family 1
[ 0.329020] pci 0000:00:02.0: Boot video device
[ 0.329807] PCI: CLS 64 bytes, default 64
[ 0.330018] Trying to unpack rootfs image as initramfs...
[ 0.406232] Freeing initrd memory: 3348K (ffff880037966000 - ffff880037cab000)
[ 0.406292] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.406334] software IO TLB [mem 0xd5c9f000-0xd9c9f000] (64MB) mapped at [ffff8800d5c9f000-ffff8800d9c9efff]
[ 0.406641] perf: amd_iommu PMU not installed. No support!
[ 0.406803] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
[ 0.406851] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
[ 0.406902] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28
[ 0.406950] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28
[ 0.407076] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 0.407134] Scanning for low memory corruption every 60 seconds
[ 0.407773] Initialise module verification
[ 0.407876] audit: initializing netlink socket (disabled)
[ 0.407937] type=2000 audit(1372265220.392:1): initialized
[ 0.438856] bounce pool size: 64 pages
[ 0.438918] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.440145] VFS: Disk quotas dquot_6.5.2
[ 0.440223] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.441098] fuse init (API version 7.22)
[ 0.441239] msgmni has been set to 7698
[ 0.442012] Key type asymmetric registered
[ 0.442050] Asymmetric key parser 'x509' registered
[ 0.442137] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.442248] io scheduler noop registered
[ 0.442285] io scheduler deadline registered (default)
[ 0.442359] io scheduler cfq registered
[ 0.442782] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.442861] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.442994] intel_idle: MWAIT substates: 0x21120
[ 0.442995] intel_idle: v0.4 model 0x2A
[ 0.442996] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.443530] ACPI: AC Adapter [ADP1] (on-line)
[ 0.443992] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.444069] ACPI: Lid Switch [LID0]
[ 0.444170] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.444229] ACPI: Power Button [PWRB]
[ 0.444324] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.444381] ACPI: Power Button [PWRF]
[ 0.444508] ACPI: Fan [FAN0] (off)
[ 0.444592] ACPI: Fan [FAN1] (off)
[ 0.444682] ACPI: Fan [FAN2] (off)
[ 0.444767] ACPI: Fan [FAN3] (off)
[ 0.444852] ACPI: Fan [FAN4] (off)
[ 0.444967] ACPI: Requesting acpi_cpufreq
[ 0.448321] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.448363] ACPI: Thermal Zone [TZ00] (70 C)
[ 0.448815] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.448855] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.448952] GHES: HEST is not enabled!
[ 0.449184] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.453741] ACPI: Battery Slot [BAT1] (battery present)
[ 0.454004] Linux agpgart interface v0.103
[ 0.456572] brd: module loaded
[ 0.457911] loop: module loaded
[ 0.458168] mei_me 0000:00:16.0: setting latency timer to 64
[ 0.458213] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X
[ 0.461336] ahci 0000:00:1f.2: version 3.0
[ 0.461512] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 0.461720] ahci: SSS flag set, parallel bus scan disabled
[ 0.477325] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode
[ 0.477383] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 0.477445] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.502131] scsi0 : ahci
[ 0.502377] scsi1 : ahci
[ 0.502537] scsi2 : ahci
[ 0.502696] scsi3 : ahci
[ 0.502851] scsi4 : ahci
[ 0.503006] scsi5 : ahci
[ 0.503117] ata1: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708100 irq 41
[ 0.503172] ata2: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708180 irq 41
[ 0.503226] ata3: DUMMY
[ 0.503260] ata4: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708280 irq 41
[ 0.503315] ata5: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708300 irq 41
[ 0.503369] ata6: DUMMY
[ 0.504358] libphy: Fixed MDIO Bus: probed
[ 0.504675] tun: Universal TUN/TAP device driver, 1.6
[ 0.504713] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 0.504838] PPP generic driver version 2.4.2
[ 0.504989] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.505030] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
[ 0.505038] ehci-pci: EHCI PCI platform driver
[ 0.505256] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 0.505276] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.505323] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.505394] ehci-pci 0000:00:1a.0: debug port 2
[ 0.505435] ehci-pci 0000:00:1a.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
[ 0.505439] ehci-pci 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr
[ 0.505480] ehci-pci 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 0.509356] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.509358] ehci-pci 0000:00:1a.0: supports USB remote wakeup
[ 0.509403] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf070a000
[ 0.509445] ehci-pci 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 0.521272] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.521361] usb usb1: default language 0x0409
[ 0.521374] usb usb1: udev 1, busnum 1, minor = 0
[ 0.521376] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.521418] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.521473] usb usb1: Product: EHCI Host Controller
[ 0.521511] usb usb1: Manufacturer: Linux 3.10.0-rc7-next20130625-2-iniza-small ehci_hcd
[ 0.521566] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.521734] usb usb1: usb_probe_device
[ 0.521736] usb usb1: configuration #1 chosen from 1 choice
[ 0.521747] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 0.521778] hub 1-0:1.0: usb_probe_interface
[ 0.521780] hub 1-0:1.0: usb_probe_interface - got id
[ 0.521783] hub 1-0:1.0: USB hub found
[ 0.521824] hub 1-0:1.0: 2 ports detected
[ 0.521861] hub 1-0:1.0: standalone hub
[ 0.521863] hub 1-0:1.0: no power switching (usb 1.0)
[ 0.521864] hub 1-0:1.0: individual port over-current protection
[ 0.521866] hub 1-0:1.0: power on to power good time: 20ms
[ 0.521872] hub 1-0:1.0: local power source is good
[ 0.521927] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 0.522147] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 0.522155] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.522199] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.522269] ehci-pci 0000:00:1d.0: debug port 2
[ 0.522309] ehci-pci 0000:00:1d.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
[ 0.522313] ehci-pci 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr
[ 0.522348] ehci-pci 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 0.526220] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.526221] ehci-pci 0000:00:1d.0: supports USB remote wakeup
[ 0.526267] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0709000
[ 0.526310] ehci-pci 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 0.537261] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.537341] usb usb2: default language 0x0409
[ 0.537353] usb usb2: udev 1, busnum 2, minor = 128
[ 0.537355] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.537397] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.537451] usb usb2: Product: EHCI Host Controller
[ 0.537489] usb usb2: Manufacturer: Linux 3.10.0-rc7-next20130625-2-iniza-small ehci_hcd
[ 0.537545] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.537694] usb usb2: usb_probe_device
[ 0.537697] usb usb2: configuration #1 chosen from 1 choice
[ 0.537705] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 0.537737] hub 2-0:1.0: usb_probe_interface
[ 0.537739] hub 2-0:1.0: usb_probe_interface - got id
[ 0.537741] hub 2-0:1.0: USB hub found
[ 0.537782] hub 2-0:1.0: 2 ports detected
[ 0.537819] hub 2-0:1.0: standalone hub
[ 0.537821] hub 2-0:1.0: no power switching (usb 1.0)
[ 0.537822] hub 2-0:1.0: individual port over-current protection
[ 0.537824] hub 2-0:1.0: power on to power good time: 20ms
[ 0.537829] hub 2-0:1.0: local power source is good
[ 0.537882] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 0.537960] ehci-platform: EHCI generic platform driver
[ 0.538014] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.538054] ohci_hcd: block sizes: ed 80 td 96
[ 0.538060] ohci-pci: OHCI PCI platform driver
[ 0.538117] ohci-platform: OHCI generic platform driver
[ 0.538170] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.538404] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.538448] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[ 0.548217] xhci_hcd 0000:03:00.0: supports USB remote wakeup
[ 0.548248] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
[ 0.548256] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
[ 0.548265] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
[ 0.548272] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
[ 0.548279] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
[ 0.548556] usb usb3: default language 0x0409
[ 0.548568] usb usb3: udev 1, busnum 3, minor = 256
[ 0.548570] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.548612] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.548666] usb usb3: Product: xHCI Host Controller
[ 0.548704] usb usb3: Manufacturer: Linux 3.10.0-rc7-next20130625-2-iniza-small xhci_hcd
[ 0.548760] usb usb3: SerialNumber: 0000:03:00.0
[ 0.548940] usb usb3: usb_probe_device
[ 0.548943] usb usb3: configuration #1 chosen from 1 choice
[ 0.548948] xHCI xhci_add_endpoint called for root hub
[ 0.548949] xHCI xhci_check_bandwidth called for root hub
[ 0.548955] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 0.548985] hub 3-0:1.0: usb_probe_interface
[ 0.548987] hub 3-0:1.0: usb_probe_interface - got id
[ 0.548989] hub 3-0:1.0: USB hub found
[ 0.549037] hub 3-0:1.0: 2 ports detected
[ 0.549074] hub 3-0:1.0: standalone hub
[ 0.549075] hub 3-0:1.0: no power switching (usb 1.0)
[ 0.549077] hub 3-0:1.0: individual port over-current protection
[ 0.549078] hub 3-0:1.0: Single TT
[ 0.549080] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns)
[ 0.549082] hub 3-0:1.0: power on to power good time: 20ms
[ 0.549087] hub 3-0:1.0: local power source is good
[ 0.549123] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 0.549192] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.549245] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[ 0.549309] xhci_hcd 0000:03:00.0: supports USB remote wakeup
[ 0.549343] usb usb4: skipped 1 descriptor after endpoint
[ 0.549348] usb usb4: default language 0x0409
[ 0.549360] usb usb4: udev 1, busnum 4, minor = 384
[ 0.549362] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.549403] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.549458] usb usb4: Product: xHCI Host Controller
[ 0.549496] usb usb4: Manufacturer: Linux 3.10.0-rc7-next20130625-2-iniza-small xhci_hcd
[ 0.549551] usb usb4: SerialNumber: 0000:03:00.0
[ 0.549685] usb usb4: usb_probe_device
[ 0.549688] usb usb4: configuration #1 chosen from 1 choice
[ 0.549692] xHCI xhci_add_endpoint called for root hub
[ 0.549693] xHCI xhci_check_bandwidth called for root hub
[ 0.549698] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 0.549729] hub 4-0:1.0: usb_probe_interface
[ 0.549731] hub 4-0:1.0: usb_probe_interface - got id
[ 0.549733] hub 4-0:1.0: USB hub found
[ 0.549779] hub 4-0:1.0: 2 ports detected
[ 0.549816] hub 4-0:1.0: standalone hub
[ 0.549817] hub 4-0:1.0: no power switching (usb 1.0)
[ 0.549818] hub 4-0:1.0: individual port over-current protection
[ 0.549820] hub 4-0:1.0: TT requires at most 8 FS bit times (666 ns)
[ 0.549822] hub 4-0:1.0: power on to power good time: 20ms
[ 0.549827] hub 4-0:1.0: local power source is good
[ 0.549862] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 0.565320] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12
[ 0.571683] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.571726] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.572007] mousedev: PS/2 mouse device common for all mice
[ 0.572505] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.572580] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.572700] device-mapper: uevent: version 1.0.3
[ 0.572824] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@xxxxxxxxxx
[ 0.572895] Intel P-state driver initializing.
[ 0.572954] Intel pstate controlling: cpu 0
[ 0.573015] Intel pstate controlling: cpu 1
[ 0.573073] Intel pstate controlling: cpu 2
[ 0.573131] Intel pstate controlling: cpu 3
[ 0.573417] cpuidle: using governor ladder
[ 0.573692] cpuidle: using governor menu
[ 0.573736] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.574023] ashmem: initialized
[ 0.574244] TCP: cubic registered
[ 0.574408] NET: Registered protocol family 10
[ 0.574901] NET: Registered protocol family 17
[ 0.574960] Key type dns_resolver registered
[ 0.575547] PM: Hibernation image not present or could not be loaded.
[ 0.575553] Loading module verification certificates
[ 0.576667] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: ad2f96d2059fbf729a10d37d35ceeca9b01ac7b3'
[ 0.576752] registered taskstats version 1
[ 0.579672] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.581102] Key type trusted registered
[ 0.586946] Key type encrypted registered
[ 0.594521] rtc_cmos 00:05: setting system clock to 2013-06-26 16:47:01 UTC (1372265221)
[ 0.594971] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.595011] EDD information not available.
[ 0.621324] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 0.621338] hub 1-0:1.0: port 1: status 0501 change 0001
[ 0.637314] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 0.637328] hub 2-0:1.0: port 1: status 0501 change 0001
[ 0.645366] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 0.645404] hub 3-0:1.0: hub_suspend
[ 0.645418] usb usb3: bus auto-suspend, wakeup 1
[ 0.649359] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 0.649429] hub 4-0:1.0: hub_suspend
[ 0.649441] usb usb4: bus auto-suspend, wakeup 1
[ 0.657895] usb usb4: usb wakeup-resume
[ 0.657903] usb usb4: usb auto-resume
[ 0.669273] hub 4-0:1.0: hub_resume
[ 0.669296] hub 4-0:1.0: port 1: status 0203 change 0001
[ 0.721527] hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 0.721558] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 0.777411] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled
[ 0.777420] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 0.821174] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.822421] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133
[ 0.822496] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.823948] ata1.00: configured for UDMA/133
[ 0.824455] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 GG2O PQ: 0 ANSI: 5
[ 0.824868] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 0.824949] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.825005] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 0.825544] sd 0:0:0:0: [sda] Write Protect is off
[ 0.825592] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.825738] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.833146] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.840197] sda: sda1 sda2 sda3
[ 0.841683] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.889330] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled
[ 0.889338] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 0.965753] usb 1-1: udev 2, busnum 1, minor = 1
[ 0.965761] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 0.965815] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.966194] usb 1-1: usb_probe_device
[ 0.966201] usb 1-1: configuration #1 chosen from 1 choice
[ 0.966375] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[ 0.966438] hub 1-1:1.0: usb_probe_interface
[ 0.966442] hub 1-1:1.0: usb_probe_interface - got id
[ 0.966447] hub 1-1:1.0: USB hub found
[ 0.967244] hub 1-1:1.0: 6 ports detected
[ 0.967293] hub 1-1:1.0: standalone hub
[ 0.967296] hub 1-1:1.0: individual port power switching
[ 0.967299] hub 1-1:1.0: individual port over-current protection
[ 0.967301] hub 1-1:1.0: Single TT
[ 0.967304] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
[ 0.967307] hub 1-1:1.0: power on to power good time: 100ms
[ 0.967572] hub 1-1:1.0: local power source is good
[ 0.967890] hub 1-1:1.0: enabling power on all ports
[ 0.968959] hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 0.968974] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 1.025232] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled
[ 1.025241] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 1.065426] hub 1-1:1.0: port 2: status 0101 change 0001
[ 1.066190] hub 1-1:1.0: port 4: status 0101 change 0001
[ 1.080997] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.137155] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled
[ 1.137167] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 1.144947] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.145560] ata2.00: ATA-8: SanDisk iSSD P4 16GB, SSD 9.14, max UDMA/133
[ 1.145627] ata2.00: 31277232 sectors, multi 1: LBA48
[ 1.146369] ata2.00: configured for UDMA/133
[ 1.146827] scsi 1:0:0:0: Direct-Access ATA SanDisk iSSD P4 SSD PQ: 0 ANSI: 5
[ 1.147234] sd 1:0:0:0: [sdb] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 1.147253] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.147489] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.147529] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.147556] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.148523] sdb: sdb1 sdb2
[ 1.149269] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.164951] usb 1-1: link qh256-0001/ffff880118661dc0 start 1 [1/0 us]
[ 1.213596] usb 2-1: udev 2, busnum 2, minor = 129
[ 1.213604] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.213670] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.214049] usb 2-1: usb_probe_device
[ 1.214057] usb 2-1: configuration #1 chosen from 1 choice
[ 1.214345] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
[ 1.214408] hub 2-1:1.0: usb_probe_interface
[ 1.214412] hub 2-1:1.0: usb_probe_interface - got id
[ 1.214418] hub 2-1:1.0: USB hub found
[ 1.214689] hub 2-1:1.0: 6 ports detected
[ 1.214749] hub 2-1:1.0: standalone hub
[ 1.214752] hub 2-1:1.0: individual port power switching
[ 1.214755] hub 2-1:1.0: individual port over-current protection
[ 1.214757] hub 2-1:1.0: Single TT
[ 1.214760] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns)
[ 1.214763] hub 2-1:1.0: power on to power good time: 100ms
[ 1.215211] hub 2-1:1.0: local power source is good
[ 1.215554] hub 2-1:1.0: enabling power on all ports
[ 1.216699] hub 4-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 1.216720] hub 4-0:1.0: port 1, status 0203, change 0000, 5.0 Gb/s
[ 1.313753] hub 2-1:1.0: port 5: status 0101 change 0001
[ 1.332416] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 1.345413] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted.
[ 1.345809] usb 4-1: skipped 1 descriptor after endpoint
[ 1.345814] usb 4-1: skipped 1 descriptor after endpoint
[ 1.345922] usb 4-1: default language 0x0409
[ 1.346309] usb 4-1: udev 2, busnum 4, minor = 385
[ 1.346325] usb 4-1: New USB device found, idVendor=174c, idProduct=55aa
[ 1.346374] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 1.346422] usb 4-1: Product: MEDION HDDrive-n-GO
[ 1.346465] usb 4-1: Manufacturer: MEDION
[ 1.346506] usb 4-1: SerialNumber: 3180000000000000092C
[ 1.346814] usb 4-1: usb_probe_device
[ 1.346818] usb 4-1: configuration #1 chosen from 1 choice
[ 1.347904] usb 4-1: Successful Endpoint Configure command
[ 1.348023] usb 4-1: adding 4-1:1.0 (config #1, interface 0)
[ 1.348156] hub 1-1:1.0: state 7 ports 6 chg 0014 evt 0000
[ 1.348300] hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s
[ 1.404759] tsc: Refined TSC clocksource calibration: 1596.374 MHz
[ 1.412769] usb 2-1: link qh256-0001/ffff880118661ac0 start 1 [1/0 us]
[ 1.416951] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
[ 1.464712] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.512136] usb 1-1.2: skipped 1 descriptor after interface
[ 1.512612] usb 1-1.2: default language 0x0409
[ 1.515406] usb 1-1.2: udev 3, busnum 1, minor = 2
[ 1.515415] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c00e
[ 1.515481] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.515554] usb 1-1.2: Product: USB-PS/2 Optical Mouse
[ 1.515611] usb 1-1.2: Manufacturer: Logitech
[ 1.515965] usb 1-1.2: usb_probe_device
[ 1.515973] usb 1-1.2: configuration #1 chosen from 1 choice
[ 1.516481] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0)
[ 1.516850] hub 1-1:1.0: port 4, status 0101, change 0000, 12 Mb/s
[ 1.588803] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[ 1.784486] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.786242] Freeing unused kernel memory: 1328K (ffffffff81d06000 - ffffffff81e52000)
[ 1.786300] Write protecting the kernel read-only data: 12288k
[ 1.789483] Freeing unused kernel memory: 1084K (ffff8800016f1000 - ffff880001800000)
[ 1.791845] Freeing unused kernel memory: 976K (ffff880001b0c000 - ffff880001c00000)
[ 1.815664] udevd[124]: starting version 175
[ 1.826681] usb 1-1.4: skipped 1 descriptor after configuration
[ 1.826688] usb 1-1.4: skipped 5 descriptors after interface
[ 1.826692] usb 1-1.4: skipped 1 descriptor after endpoint
[ 1.826696] usb 1-1.4: skipped 23 descriptors after interface
[ 1.828675] usb 1-1.4: default language 0x0409
[ 1.840666] usb 1-1.4: udev 4, busnum 1, minor = 3
[ 1.840673] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1018
[ 1.840722] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.840780] usb 1-1.4: Product: WebCam SC-13HDL11431N
[ 1.840824] usb 1-1.4: Manufacturer: 123
[ 1.851665] usb 1-1.4: usb_probe_device
[ 1.851672] usb 1-1.4: configuration #1 chosen from 1 choice
[ 1.851780] usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0)
[ 1.932162] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.932283] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.932635] r8169 0000:02:00.0: irq 47 for MSI/MSI-X
[ 1.935240] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000620000, e8:03:9a:36:17:a9, XID 0c900800 IRQ 47
[ 1.935312] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.966630] usb-storage 4-1:1.0: usb_probe_interface
[ 1.966642] usb-storage 4-1:1.0: usb_probe_interface - got id
[ 1.966648] usb-storage 4-1:1.0: USB Mass Storage device detected
[ 1.966893] scsi6 : usb-storage 4-1:1.0
[ 1.967413] usbcore: registered new interface driver usb-storage
[ 2.023956] usb 1-1.4: adding 1-1.4:1.1 (config #1, interface 1)
[ 2.024050] hub 2-1:1.0: state 7 ports 6 chg 0020 evt 0000
[ 2.024159] hub 2-1:1.0: port 5, status 0101, change 0000, 12 Mb/s
[ 2.033186] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.035585] usbhid 1-1.2:1.0: usb_probe_interface
[ 2.035589] usbhid 1-1.2:1.0: usb_probe_interface - got id
[ 2.038197] usbcore: registered new interface driver usbhid
[ 2.038240] usbhid: USB HID core driver
[ 2.042361] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4
[ 2.042750] hid-generic 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.2/input0
[ 2.096437] usb 2-1.5: new full-speed USB device number 3 using ehci-pci
[ 2.192827] usb 2-1.5: udev 3, busnum 2, minor = 130
[ 2.192834] usb 2-1.5: New USB device found, idVendor=8086, idProduct=0189
[ 2.192885] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.193131] usb 2-1.5: usb_probe_device
[ 2.193135] usb 2-1.5: configuration #1 chosen from 1 choice
[ 2.193677] usb 2-1.5: adding 2-1.5:1.0 (config #1, interface 0)
[ 2.193809] usb 2-1.5: adding 2-1.5:1.1 (config #1, interface 1)
[ 2.193938] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0010
[ 2.194032] hub 2-1:1.0: state 7 ports 6 chg 0000 evt 0020
[ 2.835812] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[ 2.968103] scsi 6:0:0:0: Direct-Access ASMT 2105 0 PQ: 0 ANSI: 6
[ 2.968692] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 2.968798] sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.969279] sd 6:0:0:0: [sdc] Write Protect is off
[ 2.969318] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
[ 2.969730] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.971306] sdc: sdc1 sdc2 sdc3
[ 2.972759] sd 6:0:0:0: [sdc] Attached SCSI disk
[ 4.698956] init: ureadahead main process (327) terminated with status 5
[ 8.398276] Adding 262140k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:262140k FS
[ 8.546158] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro
[ 8.700203] udevd[605]: starting version 175
[ 9.580108] lp: driver loaded but no devices found
[ 11.202083] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
[ 11.202091] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.202096] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[ 11.202100] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.202101] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[ 11.202105] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.202106] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[ 11.202109] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.202111] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 11.227586] wmi: Mapper loaded
[ 11.428096] samsung_laptop: detected SABI interface: SwSmi@
[ 11.428100] samsung_laptop: Backlight controlled by ACPI video driver
[ 11.451980] [drm] Initialized drm 1.1.0 20060810
[ 11.456124] cfg80211: Calling CRDA to update world regulatory domain
[ 11.547055] Bluetooth: Core ver 2.16
[ 11.547098] NET: Registered protocol family 31
[ 11.547101] Bluetooth: HCI device and connection manager initialized
[ 11.547117] Bluetooth: HCI socket layer initialized
[ 11.547131] Bluetooth: L2CAP socket layer initialized
[ 11.547155] Bluetooth: SCO socket layer initialized
[ 11.753495] btusb 2-1.5:1.0: usb_probe_interface
[ 11.753501] btusb 2-1.5:1.0: usb_probe_interface - got id
[ 11.755096] usb 2-1.5: link qh1-0e01/ffff880118661140 start 0 [1/2 us]
[ 11.755119] usbcore: registered new interface driver btusb
[ 11.973347] Intel(R) Wireless WiFi driver for Linux, in-tree:d
[ 11.973352] Copyright(c) 2003-2013 Intel Corporation
[ 11.973413] iwlwifi 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 11.973686] iwlwifi 0000:01:00.0: irq 48 for MSI/MSI-X
[ 12.337725] [drm] Memory usable by graphics device = 2048M
[ 12.337734] i915 0000:00:02.0: setting latency timer to 64
[ 12.368844] i915 0000:00:02.0: irq 49 for MSI/MSI-X
[ 12.368857] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 12.368859] [drm] Driver supports precise vblank timestamp query.
[ 12.369046] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 12.379634] [drm] Wrong MCH_SSKPD value: 0x16040307
[ 12.379638] [drm] This can cause pipe underruns and display issues.
[ 12.379639] [drm] Please upgrade your BIOS to fix this.
[ 12.394888] fbcon: inteldrmfb (fb0) is primary device
[ 12.568524] Linux video capture interface: v2.00
[ 12.615298] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00)
[ 12.630477] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c.
[ 12.705776] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5
[ 12.843570] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 13.035043] cfg80211: World regulatory domain updated:
[ 13.035044] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 13.035047] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.035048] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.035050] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.035051] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.035052] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.146331] uvcvideo 1-1.4:1.0: usb_probe_interface
[ 13.146333] uvcvideo 1-1.4:1.0: usb_probe_interface - got id
[ 13.146381] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11431N (2232:1018)
[ 13.165724] input: WebCam SC-13HDL11431N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input6
[ 13.165885] usbcore: registered new interface driver uvcvideo
[ 13.165886] USB Video Class driver (1.1.1)
[ 13.209800] usb 1-1.4: link qh16-0001/ffff8801070a1bc0 start 2 [1/0 us]
[ 13.209868] usb 1-1.4: unlink qh16-0001/ffff8801070a1bc0 start 2 [1/0 us]
[ 13.375915] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG enabled
[ 13.375916] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 13.375917] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 13.375918] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
[ 13.375919] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_P2P disabled
[ 13.375921] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0
[ 13.375975] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 13.399044] Console: switching to colour frame buffer device 170x48
[ 13.401675] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 13.401679] i915 0000:00:02.0: registered panic notifier
[ 13.421941] acpi device:33: registered as cooling_device9
[ 13.422306] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 13.422384] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 13.422600] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 13.422939] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[ 13.450270] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 13.556639] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 13.556818] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 13.557021] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 13.817541] type=1400 audit(1372258034.730:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=913 comm="apparmor_parser"
[ 13.817622] type=1400 audit(1372258034.730:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=872 comm="apparmor_parser"
[ 13.817640] type=1400 audit(1372258034.730:4): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=968 comm="apparmor_parser"
[ 13.818138] type=1400 audit(1372258034.730:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=913 comm="apparmor_parser"
[ 13.818499] type=1400 audit(1372258034.730:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=913 comm="apparmor_parser"
[ 13.818643] type=1400 audit(1372258034.730:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=872 comm="apparmor_parser"
[ 13.818658] type=1400 audit(1372258034.730:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=968 comm="apparmor_parser"
[ 13.819276] type=1400 audit(1372258034.730:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=872 comm="apparmor_parser"
[ 13.819289] type=1400 audit(1372258034.730:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=968 comm="apparmor_parser"
[ 13.820385] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 13.915882] usb 2-1.5: unlink qh1-0e01/ffff880118661140 start 0 [1/2 us]
[ 13.918522] usb 2-1: clear tt buffer port 5, a3 ep2 t04048d82
[ 15.150932] ppdev: user-space parallel port driver
[ 15.235585] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.235591] Bluetooth: BNEP filters: protocol multicast
[ 15.235607] Bluetooth: BNEP socket layer initialized
[ 15.259583] Bluetooth: RFCOMM TTY layer initialized
[ 15.259608] Bluetooth: RFCOMM socket layer initialized
[ 15.259611] Bluetooth: RFCOMM ver 1.11
[ 15.454073] init: failsafe main process (998) killed by TERM signal
[ 15.511355] ehci-pci 0000:00:1d.0: reused qh ffff880118661140 schedule
[ 15.511363] usb 2-1.5: link qh1-0e01/ffff880118661140 start 0 [1/2 us]
[ 15.782618] usb 1-1.4: usb auto-suspend, wakeup 0
[ 16.226915] type=1400 audit(1372258037.142:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1100 comm="apparmor_parser"
[ 19.753229] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 19.759916] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 20.032505] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 20.039165] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 20.119063] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 21.215408] usb 1-1.2: link qh8-0e01/ffff880108c373c0 start 3 [1/2 us]
[ 26.654527] wlan0: authenticate with 00:04:0e:e4:00:3d
[ 26.657889] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3)
[ 26.662319] wlan0: authenticated
[ 26.662474] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 26.662478] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 26.662767] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3)
[ 26.667829] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1)
[ 26.676040] wlan0: associated
[ 26.676111] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 29.924825] usb usb3: usb auto-resume
[ 29.924845] hub 3-0:1.0: hub_resume
[ 29.924873] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 29.924891] hub 3-0:1.0: hub_suspend
[ 29.924898] usb usb3: bus auto-suspend, wakeup 1
[ 29.924942] usb usb3: usb auto-resume
[ 29.936567] hub 3-0:1.0: hub_resume
[ 29.936607] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 29.936639] hub 3-0:1.0: hub_suspend
[ 29.936647] usb usb3: bus auto-suspend, wakeup 1
[ 29.937340] usb 1-1.4: usb auto-resume
[ 29.984576] usb 1-1.4: finish resume
[ 30.123461] usb usb3: usb auto-resume
[ 30.123483] hub 3-0:1.0: hub_resume
[ 30.123518] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 30.123538] hub 3-0:1.0: hub_suspend
[ 30.123544] usb usb3: bus auto-suspend, wakeup 1
[ 30.123580] usb usb3: usb auto-resume
[ 30.136383] hub 3-0:1.0: hub_resume
[ 30.136432] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 30.136454] hub 3-0:1.0: hub_suspend
[ 30.136467] usb usb3: bus auto-suspend, wakeup 1
[ 30.181819] usb usb3: usb auto-resume
[ 30.181842] hub 3-0:1.0: hub_resume
[ 30.181872] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 30.181912] hub 3-0:1.0: hub_suspend
[ 30.181919] usb usb3: bus auto-suspend, wakeup 1
[ 30.181988] usb usb3: usb auto-resume
[ 30.196314] hub 3-0:1.0: hub_resume
[ 30.196368] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 30.196397] hub 3-0:1.0: hub_suspend
[ 30.196402] usb usb3: bus auto-suspend, wakeup 1
[ 30.240512] usb usb3: usb auto-resume
[ 30.240535] hub 3-0:1.0: hub_resume
[ 30.240563] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 30.240573] hub 3-0:1.0: hub_suspend
[ 30.240579] usb usb3: bus auto-suspend, wakeup 1
[ 30.240625] usb usb3: usb auto-resume
[ 30.252246] hub 3-0:1.0: hub_resume
[ 30.252314] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 30.252332] hub 3-0:1.0: hub_suspend
[ 30.252340] usb usb3: bus auto-suspend, wakeup 1
[ 30.433399] usb usb3: usb auto-resume
[ 30.433422] hub 3-0:1.0: hub_resume
[ 30.433455] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 30.433477] hub 3-0:1.0: hub_suspend
[ 30.433485] usb usb3: bus auto-suspend, wakeup 1
[ 30.433554] usb usb3: usb auto-resume
[ 30.444108] hub 3-0:1.0: hub_resume
[ 30.444146] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 30.444169] hub 3-0:1.0: hub_suspend
[ 30.444177] usb usb3: bus auto-suspend, wakeup 1
[ 30.463905] usb usb3: usb auto-resume
[ 30.463929] hub 3-0:1.0: hub_resume
[ 30.463957] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 30.463975] hub 3-0:1.0: hub_suspend
[ 30.463981] usb usb3: bus auto-suspend, wakeup 1
[ 30.464037] usb usb3: usb auto-resume
[ 30.472143] hub 3-0:1.0: hub_resume
[ 30.472173] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 30.472191] hub 3-0:1.0: hub_suspend
[ 30.472198] usb usb3: bus auto-suspend, wakeup 1
[ 30.534354] usb usb3: usb auto-resume
[ 30.534378] hub 3-0:1.0: hub_resume
[ 30.534409] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 30.534426] hub 3-0:1.0: hub_suspend
[ 30.534432] usb usb3: bus auto-suspend, wakeup 1
[ 30.534529] usb usb3: usb auto-resume
[ 30.544040] hub 3-0:1.0: hub_resume
[ 30.544104] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 30.544118] hub 3-0:1.0: hub_suspend
[ 30.544124] usb usb3: bus auto-suspend, wakeup 1
[ 31.144429] usb usb3: usb auto-resume
[ 31.144453] hub 3-0:1.0: hub_resume
[ 31.144560] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 31.144590] hub 3-0:1.0: hub_suspend
[ 31.144596] usb usb3: bus auto-suspend, wakeup 1
[ 31.194334] usb usb3: usb auto-resume
[ 31.194354] hub 3-0:1.0: hub_resume
[ 31.194380] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 31.194398] hub 3-0:1.0: hub_suspend
[ 31.194403] usb usb3: bus auto-suspend, wakeup 1
[ 31.194444] usb usb3: usb auto-resume
[ 31.203610] hub 3-0:1.0: hub_resume
[ 31.203661] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 31.203675] hub 3-0:1.0: hub_suspend
[ 31.203681] usb usb3: bus auto-suspend, wakeup 1
[ 31.516426] usb usb3: usb auto-resume
[ 31.516452] hub 3-0:1.0: hub_resume
[ 31.516481] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 31.516505] hub 3-0:1.0: hub_suspend
[ 31.516513] usb usb3: bus auto-suspend, wakeup 1
[ 31.516577] usb usb3: usb auto-resume
[ 31.527344] hub 3-0:1.0: hub_resume
[ 31.527370] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 31.527391] hub 3-0:1.0: hub_suspend
[ 31.527396] usb usb3: bus auto-suspend, wakeup 1
[ 31.794495] usb usb3: usb auto-resume
[ 31.794517] hub 3-0:1.0: hub_resume
[ 31.794547] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 31.794561] hub 3-0:1.0: hub_suspend
[ 31.794566] usb usb3: bus auto-suspend, wakeup 1
[ 31.794593] usb usb3: usb auto-resume
[ 31.803188] hub 3-0:1.0: hub_resume
[ 31.803230] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 31.803243] hub 3-0:1.0: hub_suspend
[ 31.803248] usb usb3: bus auto-suspend, wakeup 1
[ 32.849410] usb usb3: usb auto-resume
[ 32.849431] hub 3-0:1.0: hub_resume
[ 32.849461] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.849476] hub 3-0:1.0: hub_suspend
[ 32.849481] usb usb3: bus auto-suspend, wakeup 1
[ 32.849502] usb usb3: usb auto-resume
[ 32.862445] hub 3-0:1.0: hub_resume
[ 32.862509] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.862526] hub 3-0:1.0: hub_suspend
[ 32.862532] usb usb3: bus auto-suspend, wakeup 1
[ 32.909658] usb usb3: usb auto-resume
[ 32.909679] hub 3-0:1.0: hub_resume
[ 32.909752] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.909771] hub 3-0:1.0: hub_suspend
[ 32.909779] usb usb3: bus auto-suspend, wakeup 1
[ 32.918302] usb usb3: usb auto-resume
[ 32.926351] hub 3-0:1.0: hub_resume
[ 32.926387] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.926417] hub 3-0:1.0: hub_suspend
[ 32.926425] usb usb3: bus auto-suspend, wakeup 1
[ 32.926507] usb usb3: usb auto-resume
[ 32.938366] hub 3-0:1.0: hub_resume
[ 32.938403] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.938428] hub 3-0:1.0: hub_suspend
[ 32.938436] usb usb3: bus auto-suspend, wakeup 1
[ 33.006998] usb usb3: usb auto-resume
[ 33.007019] hub 3-0:1.0: hub_resume
[ 33.007080] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 33.007099] hub 3-0:1.0: hub_suspend
[ 33.007105] usb usb3: bus auto-suspend, wakeup 1
[ 33.007803] usb usb3: usb auto-resume
[ 33.018319] hub 3-0:1.0: hub_resume
[ 33.018428] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 33.018447] hub 3-0:1.0: hub_suspend
[ 33.018453] usb usb3: bus auto-suspend, wakeup 1
[ 33.018479] usb usb3: usb auto-resume
[ 33.030310] hub 3-0:1.0: hub_resume
[ 33.030412] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 33.030432] hub 3-0:1.0: hub_suspend
[ 33.030440] usb usb3: bus auto-suspend, wakeup 1
[ 33.033315] usb usb3: usb auto-resume
[ 33.042306] hub 3-0:1.0: hub_resume
[ 33.042367] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 33.042404] hub 3-0:1.0: hub_suspend
[ 33.042411] usb usb3: bus auto-suspend, wakeup 1
[ 33.042480] usb usb3: usb auto-resume
[ 33.054262] hub 3-0:1.0: hub_resume
[ 33.054291] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 33.054303] hub 3-0:1.0: hub_suspend
[ 33.054311] usb usb3: bus auto-suspend, wakeup 1
[ 33.057036] usb usb3: usb auto-resume
[ 33.066284] hub 3-0:1.0: hub_resume
[ 33.066320] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 33.066340] hub 3-0:1.0: hub_suspend
[ 33.066348] usb usb3: bus auto-suspend, wakeup 1
[ 33.066426] usb usb3: usb auto-resume
[ 33.078282] hub 3-0:1.0: hub_resume
[ 33.078395] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 33.078415] hub 3-0:1.0: hub_suspend
[ 33.078421] usb usb3: bus auto-suspend, wakeup 1
[ 33.089222] usb usb3: usb auto-resume
[ 33.098274] hub 3-0:1.0: hub_resume
[ 33.098353] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 33.098373] hub 3-0:1.0: hub_suspend
[ 33.098379] usb usb3: bus auto-suspend, wakeup 1
[ 33.098411] usb usb3: usb auto-resume
[ 33.110261] hub 3-0:1.0: hub_resume
[ 33.110344] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 33.110362] hub 3-0:1.0: hub_suspend
[ 33.110369] usb usb3: bus auto-suspend, wakeup 1
[ 33.114416] usb usb3: usb auto-resume
[ 33.126259] hub 3-0:1.0: hub_resume
[ 33.126342] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 33.126360] hub 3-0:1.0: hub_suspend
[ 33.126367] usb usb3: bus auto-suspend, wakeup 1
[ 33.126400] usb usb3: usb auto-resume
[ 33.138241] hub 3-0:1.0: hub_resume
[ 33.138344] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 33.138362] hub 3-0:1.0: hub_suspend
[ 33.138368] usb usb3: bus auto-suspend, wakeup 1
[ 33.139541] usb usb3: usb auto-resume
[ 33.150232] hub 3-0:1.0: hub_resume
[ 33.150317] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 33.150337] hub 3-0:1.0: hub_suspend
[ 33.150344] usb usb3: bus auto-suspend, wakeup 1
[ 33.150373] usb usb3: usb auto-resume
[ 33.162225] hub 3-0:1.0: hub_resume
[ 33.162317] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 33.162335] hub 3-0:1.0: hub_suspend
[ 33.162341] usb usb3: bus auto-suspend, wakeup 1
[ 33.182212] usb usb3: usb auto-resume
[ 33.182239] hub 3-0:1.0: hub_resume
[ 33.182279] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 33.182304] hub 3-0:1.0: hub_suspend
[ 33.182312] usb usb3: bus auto-suspend, wakeup 1
[ 33.182352] usb usb3: usb auto-resume
[ 33.194271] hub 3-0:1.0: hub_resume
[ 33.194318] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 33.194333] hub 3-0:1.0: hub_suspend
[ 33.194341] usb usb3: bus auto-suspend, wakeup 1
[ 33.196431] usb usb3: usb auto-resume
[ 33.206192] hub 3-0:1.0: hub_resume
[ 33.206300] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 33.206323] hub 3-0:1.0: hub_suspend
[ 33.206330] usb usb3: bus auto-suspend, wakeup 1
[ 33.206363] usb usb3: usb auto-resume
[ 33.218178] hub 3-0:1.0: hub_resume
[ 33.218282] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 33.218304] hub 3-0:1.0: hub_suspend
[ 33.218324] usb usb3: bus auto-suspend, wakeup 1
[ 33.227216] usb usb3: usb auto-resume
[ 33.238150] hub 3-0:1.0: hub_resume
[ 33.238226] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 33.238254] hub 3-0:1.0: hub_suspend
[ 33.238260] usb usb3: bus auto-suspend, wakeup 1
[ 33.238334] usb usb3: usb auto-resume
[ 33.250217] hub 3-0:1.0: hub_resume
[ 33.250268] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 33.250285] hub 3-0:1.0: hub_suspend
[ 33.250292] usb usb3: bus auto-suspend, wakeup 1
[ 33.252747] usb usb3: usb auto-resume
[ 33.262152] hub 3-0:1.0: hub_resume
[ 33.262255] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 33.262278] hub 3-0:1.0: hub_suspend
[ 33.262285] usb usb3: bus auto-suspend, wakeup 1
[ 33.262320] usb usb3: usb auto-resume
[ 33.274104] hub 3-0:1.0: hub_resume
[ 33.274145] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 33.274168] hub 3-0:1.0: hub_suspend
[ 33.274177] usb usb3: bus auto-suspend, wakeup 1
[ 33.283505] usb usb3: usb auto-resume
[ 33.294143] hub 3-0:1.0: hub_resume
[ 33.294221] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 33.294240] hub 3-0:1.0: hub_suspend
[ 33.294247] usb usb3: bus auto-suspend, wakeup 1
[ 33.294270] usb usb3: usb auto-resume
[ 33.306109] hub 3-0:1.0: hub_resume
[ 33.306145] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 33.306161] hub 3-0:1.0: hub_suspend
[ 33.306167] usb usb3: bus auto-suspend, wakeup 1
[ 33.358147] usb usb3: usb auto-resume
[ 33.358169] hub 3-0:1.0: hub_resume
[ 33.358197] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 33.358214] hub 3-0:1.0: hub_suspend
[ 33.358222] usb usb3: bus auto-suspend, wakeup 1
[ 33.358268] usb usb3: usb auto-resume
[ 33.370103] hub 3-0:1.0: hub_resume
[ 33.370170] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 33.370181] hub 3-0:1.0: hub_suspend
[ 33.370188] usb usb3: bus auto-suspend, wakeup 1
[ 33.384417] usb usb3: usb auto-resume
[ 33.384438] hub 3-0:1.0: hub_resume
[ 33.384495] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 33.384517] hub 3-0:1.0: hub_suspend
[ 33.384522] usb usb3: bus auto-suspend, wakeup 1
[ 33.387597] usb usb3: usb auto-resume
[ 33.398133] hub 3-0:1.0: hub_resume
[ 33.398175] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 33.398205] hub 3-0:1.0: hub_suspend
[ 33.398223] usb usb3: bus auto-suspend, wakeup 1
[ 33.398288] usb usb3: usb auto-resume
[ 33.410064] hub 3-0:1.0: hub_resume
[ 33.410122] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 33.410144] hub 3-0:1.0: hub_suspend
[ 33.410151] usb usb3: bus auto-suspend, wakeup 1
[ 33.434662] usb usb3: usb auto-resume
[ 33.434685] hub 3-0:1.0: hub_resume
[ 33.434718] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 33.434736] hub 3-0:1.0: hub_suspend
[ 33.434742] usb usb3: bus auto-suspend, wakeup 1
[ 33.434770] usb usb3: usb auto-resume
[ 33.446079] hub 3-0:1.0: hub_resume
[ 33.446116] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 33.446136] hub 3-0:1.0: hub_suspend
[ 33.446158] usb usb3: bus auto-suspend, wakeup 1
[ 33.449325] usb usb3: usb auto-resume
[ 33.457979] hub 3-0:1.0: hub_resume
[ 33.458016] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 33.458048] hub 3-0:1.0: hub_suspend
[ 33.458055] usb usb3: bus auto-suspend, wakeup 1
[ 33.458118] usb usb3: usb auto-resume
[ 33.470005] hub 3-0:1.0: hub_resume
[ 33.470077] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 33.470106] hub 3-0:1.0: hub_suspend
[ 33.470113] usb usb3: bus auto-suspend, wakeup 1
[ 33.487505] usb usb3: usb auto-resume
[ 33.487529] hub 3-0:1.0: hub_resume
[ 33.487561] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 33.487578] hub 3-0:1.0: hub_suspend
[ 33.487584] usb usb3: bus auto-suspend, wakeup 1
[ 33.487609] usb usb3: usb auto-resume
[ 33.498031] hub 3-0:1.0: hub_resume
[ 33.498065] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 33.498101] hub 3-0:1.0: hub_suspend
[ 33.498109] usb usb3: bus auto-suspend, wakeup 1
[ 34.606256] usb usb3: usb auto-resume
[ 34.606277] hub 3-0:1.0: hub_resume
[ 34.606334] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 34.606352] hub 3-0:1.0: hub_suspend
[ 34.606358] usb usb3: bus auto-suspend, wakeup 1
[ 34.912105] usb usb3: usb auto-resume
[ 34.912126] hub 3-0:1.0: hub_resume
[ 34.912187] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 34.912205] hub 3-0:1.0: hub_suspend
[ 34.912211] usb usb3: bus auto-suspend, wakeup 1
[ 34.938252] usb usb3: usb auto-resume
[ 34.938272] hub 3-0:1.0: hub_resume
[ 34.938325] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 34.938341] hub 3-0:1.0: hub_suspend
[ 34.938346] usb usb3: bus auto-suspend, wakeup 1
[ 34.941024] usb usb3: usb auto-resume
[ 34.952997] hub 3-0:1.0: hub_resume
[ 34.953061] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 34.953083] hub 3-0:1.0: hub_suspend
[ 34.953089] usb usb3: bus auto-suspend, wakeup 1
[ 34.953163] usb usb3: usb auto-resume
[ 34.965006] hub 3-0:1.0: hub_resume
[ 34.965058] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 34.965085] hub 3-0:1.0: hub_suspend
[ 34.965092] usb usb3: bus auto-suspend, wakeup 1
[ 34.968287] usb usb3: usb auto-resume
[ 34.976919] hub 3-0:1.0: hub_resume
[ 34.977018] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 34.977035] hub 3-0:1.0: hub_suspend
[ 34.977041] usb usb3: bus auto-suspend, wakeup 1
[ 34.977072] usb usb3: usb auto-resume
[ 34.988974] hub 3-0:1.0: hub_resume
[ 34.989058] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 34.989076] hub 3-0:1.0: hub_suspend
[ 34.989082] usb usb3: bus auto-suspend, wakeup 1
[ 35.032671] usb usb3: usb auto-resume
[ 35.032693] hub 3-0:1.0: hub_resume
[ 35.032742] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 35.032775] hub 3-0:1.0: hub_suspend
[ 35.032780] usb usb3: bus auto-suspend, wakeup 1
[ 35.046954] usb usb3: usb auto-resume
[ 35.046975] hub 3-0:1.0: hub_resume
[ 35.047006] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 35.047025] hub 3-0:1.0: hub_suspend
[ 35.047033] usb usb3: bus auto-suspend, wakeup 1
[ 35.047060] usb usb3: usb auto-resume
[ 35.056997] hub 3-0:1.0: hub_resume
[ 35.057063] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 35.057081] hub 3-0:1.0: hub_suspend
[ 35.057088] usb usb3: bus auto-suspend, wakeup 1
[ 35.155285] usb usb3: usb auto-resume
[ 35.155306] hub 3-0:1.0: hub_resume
[ 35.155361] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 35.155381] hub 3-0:1.0: hub_suspend
[ 35.155386] usb usb3: bus auto-suspend, wakeup 1
[ 37.803102] usb 1-1.4: usb auto-suspend, wakeup 0
[ 43.864788] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null)
[ 43.888309] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 50.310696] usb 2-1.5: unlink qh1-0e01/ffff880118661140 start 0 [1/2 us]
[ 50.411829] hub 2-1:1.0: state 7 ports 6 chg 0000 evt 0020
[ 50.412086] hub 2-1:1.0: port 5, status 0100, change 0001, 12 Mb/s
[ 50.412091] usb 2-1.5: USB disconnect, device number 3
[ 50.412094] usb 2-1.5: unregistering device
[ 50.412097] usb 2-1.5: unregistering interface 2-1.5:1.0
[ 50.413892] usb 2-1.5: unregistering interface 2-1.5:1.1
[ 50.414010] usb 2-1.5: usb_disable_device nuking all URBs
[ 50.539937] hub 2-1:1.0: debounce: port 5: total 100ms stable 100ms status 0x100
[ 50.539963] hub 2-1:1.0: hub_suspend
[ 50.539971] usb 2-1: unlink qh256-0001/ffff880118661ac0 start 1 [1/0 us]
[ 50.542379] usb 2-1: usb auto-suspend, wakeup 1
[ 50.555702] hub 2-0:1.0: hub_suspend
[ 50.555714] usb usb2: bus auto-suspend, wakeup 1
[ 50.555718] ehci-pci 0000:00:1d.0: suspend root hub

Next message: Steven Rostedt: "Re: [PATCH v2 15/45] rcu: Use get/put_online_cpus_atomic() toprevent CPU offline"
Previous message: Peter Zijlstra: "Re: [Patch v5 0/9] liblockdep: userspace lockdep"
In reply to: Sedat Dilek: "Re: linux-next: Tree for Jun 26 [ vfs | block | fuse (cpuidle)releated? ]"
Next in thread: Thomas Petazzoni: "Re: linux-next: Tree for Jun 26 [ vfs | block | fuse (cpuidle)releated? ]"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]