Re: [PATCH v2] pwm: pwm-tiehrpwm: Use clk_enable/disable insteadclk_prepare/unprepare.
From: Thierry Reding
Date: Wed Jun 26 2013 - 17:42:25 EST
Hi Philip,
Can you review and/or test the patch below. It certainly looks good to
me but so I've applied it to my for-next branch, but I'd prefer to have
more feedback if possible.
If you don't have the patch in your inbox, drop me a note and I'll
bounce it to you.
Thanks,
Thierry
On Wed, Jun 26, 2013 at 02:38:04PM +0200, Marek Belisko wrote:
> This was found when using pwm-led on am33xx and enable
> heartbeat trigger.
>
> [ 808.624876] =================================
> [ 808.629443] [ INFO: inconsistent lock state ]
> [ 808.634021] 3.9.0 #2 Not tainted
> [ 808.637415] ---------------------------------
> [ 808.641981] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
> [ 808.648288] swapper/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
> [ 808.653494] (prepare_lock){+.?.+.}, at: [<c027c211>] clk_unprepare+0x15/0x24
> [ 808.661040] {SOFTIRQ-ON-W} state was registered at:
> [ 808.666155] [<c004ec4d>] __lock_acquire+0x411/0x824
> [ 808.671465] [<c004f359>] lock_acquire+0x41/0x50
> [ 808.676412] [<c039ee9d>] mutex_lock_nested+0x31/0x1d8
> [ 808.681912] [<c027c275>] clk_prepare+0x15/0x28
> [ 808.686764] [<c0590c6b>] _init+0x117/0x1e0
> [ 808.691256] [<c0019ef9>] omap_hwmod_for_each+0x29/0x3c
> [ 808.696842] [<c0591107>] __omap_hwmod_setup_all+0x17/0x2c
> [ 808.702696] [<c0008653>] do_one_initcall+0xc3/0x10c
> [ 808.708017] [<c058a627>] kernel_init_freeable+0xa7/0x134
> [ 808.713778] [<c039a543>] kernel_init+0x7/0x98
> [ 808.718544] [<c000cd95>] ret_from_fork+0x11/0x3c
> [ 808.723583] irq event stamp: 1379172
> [ 808.727328] hardirqs last enabled at (1379172): [<c03a0759>] _raw_spin_unlock_irqrestore+0x21/0x30
> [ 808.736828] hardirqs last disabled at (1379171): [<c03a03c3>] _raw_spin_lock_irqsave+0x13/0x38
> [ 808.745876] softirqs last enabled at (1379164): [<c002ae5d>] irq_enter+0x49/0x4c
> [ 808.753747] softirqs last disabled at (1379165): [<c002aec3>] irq_exit+0x63/0x88
> [ 808.761518]
> [ 808.761518] other info that might help us debug this:
> [ 808.768373] Possible unsafe locking scenario:
> [ 808.768373]
> [ 808.774578] CPU0
> [ 808.777141] ----
> [ 808.779705] lock(prepare_lock);
> [ 808.783186] <Interrupt>
> [ 808.785929] lock(prepare_lock);
> [ 808.789595]
> [ 808.789595] *** DEADLOCK ***
> [ 808.789595]
> [ 808.795805] 1 lock held by swapper/0:
> [ 808.799643] #0: (((&heartbeat_data->timer))){+.-...}, at: [<c002e204>] call_timer_fn+0x0/0x90
> [ 808.808814]
> [ 808.808814] stack backtrace:
> [ 808.813402] [<c000ff19>] (unwind_backtrace+0x1/0x98) from [<c039bd75>] (print_usage_bug.part.25+0x16d/0x1cc)
> [ 808.823721] [<c039bd75>] (print_usage_bug.part.25+0x16d/0x1cc) from [<c004e595>] (mark_lock+0x18d/0x434)
> [ 808.833669] [<c004e595>] (mark_lock+0x18d/0x434) from [<c004ec1d>] (__lock_acquire+0x3e1/0x824)
> [ 808.842803] [<c004ec1d>] (__lock_acquire+0x3e1/0x824) from [<c004f359>] (lock_acquire+0x41/0x50)
> [ 808.852031] [<c004f359>] (lock_acquire+0x41/0x50) from [<c039ee9d>] (mutex_lock_nested+0x31/0x1d8)
> [ 808.861433] [<c039ee9d>] (mutex_lock_nested+0x31/0x1d8) from [<c027c211>] (clk_unprepare+0x15/0x24)
> [ 808.870930] [<c027c211>] (clk_unprepare+0x15/0x24) from [<c019f7bf>] (ehrpwm_pwm_disable+0x5f/0x80)
> [ 808.880431] [<c019f7bf>] (ehrpwm_pwm_disable+0x5f/0x80) from [<c019f29f>] (pwm_disable+0x27/0x28)
> [ 808.889751] [<c019f29f>] (pwm_disable+0x27/0x28) from [<c026f8f3>] (led_heartbeat_function+0x3f/0xb0)
> [ 808.899431] [<c026f8f3>] (led_heartbeat_function+0x3f/0xb0) from [<c002e249>] (call_timer_fn+0x45/0x90)
> [ 808.909288] [<c002e249>] (call_timer_fn+0x45/0x90) from [<c002e399>] (run_timer_softirq+0x105/0x17c)
> [ 808.918884] [<c002e399>] (run_timer_softirq+0x105/0x17c) from [<c002abc5>] (__do_softirq+0xa5/0x150)
> [ 808.928486] [<c002abc5>] (__do_softirq+0xa5/0x150) from [<c002aec3>] (irq_exit+0x63/0x88)
> [ 808.937098] [<c002aec3>] (irq_exit+0x63/0x88) from [<c000d599>] (handle_IRQ+0x21/0x54)
> [ 808.945415] [<c000d599>] (handle_IRQ+0x21/0x54) from [<c0008495>] (omap3_intc_handle_irq+0x5d/0x68)
> [ 808.954900] [<c0008495>] (omap3_intc_handle_irq+0x5d/0x68) from [<c000c7ff>] (__irq_svc+0x3f/0x64)
> [ 808.964287] Exception stack(0xc05b1f68 to 0xc05b1fb0)
> [ 808.969587] 1f60: 00000001 00000001 00000000 00000000 c05b0000 c0619748
> [ 808.978158] 1f80: c05b0000 c05b0000 c0619748 413fc082 00000000 00000000 01000000 c05b1fb0
> [ 808.986719] 1fa0: c004f989 c000d6f0 400f0033 ffffffff
> [ 808.992024] [<c000c7ff>] (__irq_svc+0x3f/0x64) from [<c000d6f0>] (cpu_idle+0x60/0x98)
> [ 809.000250] [<c000d6f0>] (cpu_idle+0x60/0x98) from [<c058a535>] (start_kernel+0x1e9/0x234)
>
> Remove non atomic clk api calls and use only atomic for enable/disable because
> can be called from atomic context (led_heartbeat_function is timer callback).
>
> Signed-off-by: Marek Belisko <marek.belisko@xxxxxxxxxxxxxxxxxxx>
> ---
>
> changes from v1:
> - add clk_unprepare() to .remove callback +
> add it also to error handling when probe fails
>
> drivers/pwm/pwm-tiehrpwm.c | 13 +++++++++++--
> 1 file changed, 11 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pwm/pwm-tiehrpwm.c b/drivers/pwm/pwm-tiehrpwm.c
> index 8b4c86f..61eab20 100644
> --- a/drivers/pwm/pwm-tiehrpwm.c
> +++ b/drivers/pwm/pwm-tiehrpwm.c
> @@ -359,7 +359,7 @@ static int ehrpwm_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
> configure_polarity(pc, pwm->hwpwm);
>
> /* Enable TBCLK before enabling PWM device */
> - ret = clk_prepare_enable(pc->tbclk);
> + ret = clk_enable(pc->tbclk);
> if (ret) {
> pr_err("Failed to enable TBCLK for %s\n",
> dev_name(pc->chip.dev));
> @@ -395,7 +395,7 @@ static void ehrpwm_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
> ehrpwm_modify(pc->mmio_base, AQCSFRC, aqcsfrc_mask, aqcsfrc_val);
>
> /* Disabling TBCLK on PWM disable */
> - clk_disable_unprepare(pc->tbclk);
> + clk_disable(pc->tbclk);
>
> /* Stop Time base counter */
> ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_RUN_MASK, TBCTL_STOP_NEXT);
> @@ -487,6 +487,12 @@ static int ehrpwm_pwm_probe(struct platform_device *pdev)
> return PTR_ERR(pc->tbclk);
> }
>
> + ret = clk_prepare(pc->tbclk);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "clk_prepare() failed: %d\n", ret);
> + return ret;
> + }
> +
> ret = pwmchip_add(&pc->chip);
> if (ret < 0) {
> dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
> @@ -513,6 +519,7 @@ pwmss_clk_failure:
> pm_runtime_put_sync(&pdev->dev);
> pm_runtime_disable(&pdev->dev);
> pwmchip_remove(&pc->chip);
> + clk_unprepare(pc->tbclk);
> return ret;
> }
>
> @@ -520,6 +527,8 @@ static int ehrpwm_pwm_remove(struct platform_device *pdev)
> {
> struct ehrpwm_pwm_chip *pc = platform_get_drvdata(pdev);
>
> + clk_unprepare(pc->tbclk);
> +
> pm_runtime_get_sync(&pdev->dev);
> /*
> * Due to hardware misbehaviour, acknowledge of the stop_req
> --
> 1.7.9.5
>
Attachment:
pgp00000.pgp
Description: PGP signature