Re: [PATCH 1/2] media: davinci: vpif: capture: add V4L2-async support

[Hans Verkuil]

On Thu June 27 2013 08:13:40 Prabhakar Lad wrote:
> Hi Hans,
> 
> Thanks for the review.
> 
> On Thu, Jun 27, 2013 at 11:27 AM, Hans Verkuil <hverkuil@xxxxxxxxx> wrote:
> > On Tue June 25 2013 17:17:34 Prabhakar Lad wrote:
> >> From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
> >>
> >> Add support for asynchronous subdevice probing, using the v4l2-async API.
> >> The legacy synchronous mode is still supported too, which allows to
> >> gradually update drivers and platforms.
> >>
> >> Signed-off-by: Prabhakar Lad <prabhakar.csengg@xxxxxxxxx>
> >> Cc: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
> >> Cc: Hans Verkuil <hans.verkuil@xxxxxxxxx>
> >> Cc: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> >> Cc: Sakari Ailus <sakari.ailus@xxxxxx>
> >> Cc: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
> >> ---
> >>  drivers/media/platform/davinci/vpif_capture.c |  151 +++++++++++++++++--------
> >>  drivers/media/platform/davinci/vpif_capture.h |    2 +
> >>  include/media/davinci/vpif_types.h            |    2 +
> >>  3 files changed, 107 insertions(+), 48 deletions(-)
> >>
> >> diff --git a/drivers/media/platform/davinci/vpif_capture.c b/drivers/media/platform/davinci/vpif_capture.c
> >> index 5514175..b11d7a7 100644
> >> --- a/drivers/media/platform/davinci/vpif_capture.c
> >> +++ b/drivers/media/platform/davinci/vpif_capture.c
> >> @@ -1979,6 +1979,76 @@ vpif_init_free_channel_objects:
> >>       return err;
> >>  }
> >>
> >> +static int vpif_async_bound(struct v4l2_async_notifier *notifier,
> >> +                         struct v4l2_subdev *subdev,
> >> +                         struct v4l2_async_subdev *asd)
> >> +{
> >> +     int i;
> >> +
> >> +     for (i = 0; i < vpif_obj.config->subdev_count; i++)
> >> +             if (!strcmp(vpif_obj.config->subdev_info[i].name,
> >> +                         subdev->name)) {
> >
> > Since the subdev name is now prefixed with the i2c bus identifier instead of
> > just the chip name, does this code still work? Shouldn't it be 'strstr' instead
> > of strcmp? Ditto for vpif_display and possibly others where the same
> > mechanism might be used.
> >
> This is because the DA850-EVM has two tvp514x devices and assigning
> the tvp514x device to appropriate channel is important, In this case strstr()
> wont work so I used strcmp instead to match it appropriately.
> 
> Yes the code still works tested on DA850-EVM, with this patch [1].
> 
> [1] http://git.linuxtv.org/mhadli/v4l-dvb-davinci_devices.git/commitdiff/c906a89762541361158cf73e9494fa2f1ff8ba02

Ah, OK. That's what I wanted to verify!

Regards,

	Hans

> 
> Regards,
> --Prabhakar Lad
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/