[PATCH 14/51] Input: atmel_mxt_ts - Add additional bootloader addresses
From: Nick Dyer
Date: Thu Jun 27 2013 - 09:04:48 EST
Move bootloaders reads/writes into separate functions. Instead of switching
client->addr, define new field bootloader_addr in mxt_data. Implement lookup
calculation for bootloader addresses.
Signed-off-by: Nick Dyer <nick.dyer@xxxxxxxxxxx>
Acked-by: Benson Leung <bleung@xxxxxxxxxxxx>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 138 ++++++++++++++++++++----------
1 file changed, 93 insertions(+), 45 deletions(-)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 751f446..82327e6 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -30,12 +30,6 @@
#define MXT_VER_21 21
#define MXT_VER_22 22
-/* Slave addresses */
-#define MXT_APP_LOW 0x4a
-#define MXT_APP_HIGH 0x4b
-#define MXT_BOOT_LOW 0x24
-#define MXT_BOOT_HIGH 0x25
-
/* Firmware files */
#define MXT_FW_NAME "maxtouch.fw"
#define MXT_CFG_NAME "maxtouch.cfg"
@@ -268,6 +262,7 @@ struct mxt_data {
u16 mem_size;
u32 config_crc;
u32 info_crc;
+ u8 bootloader_addr;
/* Cached parameters from object table */
u8 T6_reportid;
@@ -358,9 +353,82 @@ static int mxt_wait_for_completion(struct mxt_data *data,
return 0;
}
+static int mxt_bootloader_read(struct mxt_data *data,
+ u8 *val, unsigned int count)
+{
+ int ret;
+ struct i2c_msg msg;
+
+ msg.addr = data->bootloader_addr;
+ msg.flags = data->client->flags & I2C_M_TEN;
+ msg.flags |= I2C_M_RD;
+ msg.len = count;
+ msg.buf = val;
+
+ ret = i2c_transfer(data->client->adapter, &msg, 1);
+
+ if (ret == 1) {
+ ret = 0;
+ } else {
+ ret = (ret < 0) ? ret : -EIO;
+ dev_err(&data->client->dev, "%s: i2c recv failed (%d)\n",
+ __func__, ret);
+ }
+
+ return ret;
+}
+
+static int mxt_bootloader_write(struct mxt_data *data,
+ const u8 * const val, unsigned int count)
+{
+ int ret;
+ struct i2c_msg msg;
+
+ msg.addr = data->bootloader_addr;
+ msg.flags = data->client->flags & I2C_M_TEN;
+ msg.len = count;
+ msg.buf = (u8 *)val;
+
+ ret = i2c_transfer(data->client->adapter, &msg, 1);
+ if (ret == 1) {
+ ret = 0;
+ } else {
+ ret = (ret < 0) ? ret : -EIO;
+ dev_err(&data->client->dev, "%s: i2c send failed (%d)\n",
+ __func__, ret);
+ }
+
+ return ret;
+}
+
+static int mxt_lookup_bootloader_address(struct mxt_data *data)
+{
+ u8 appmode = data->client->addr;
+ u8 bootloader;
+
+ switch (appmode) {
+ case 0x4a:
+ case 0x4b:
+ case 0x4c:
+ case 0x4d:
+ case 0x5a:
+ case 0x5b:
+ bootloader = appmode - 0x26;
+ break;
+ default:
+ dev_err(&data->client->dev,
+ "Appmode i2c address 0x%02x not found\n",
+ appmode);
+ return -EINVAL;
+ }
+
+ data->bootloader_addr = bootloader;
+ return 0;
+}
+
static int mxt_check_bootloader(struct mxt_data *data, unsigned int state)
{
- struct i2c_client *client = data->client;
+ struct device *dev = &data->client->dev;
u8 val;
int ret;
@@ -381,15 +449,14 @@ recheck:
* length 0x000 to device (iff we are in
* WAITING_FRAME_DATA state).
*/
- dev_err(&client->dev, "Update wait error %d\n", ret);
+ dev_err(dev, "Update wait error %d\n", ret);
return ret;
}
}
- if (i2c_master_recv(client, &val, 1) != 1) {
- dev_err(&client->dev, "%s: i2c recv failed\n", __func__);
- return -EIO;
- }
+ ret = mxt_bootloader_read(data, &val, 1);
+ if (ret)
+ return ret;
switch (state) {
case MXT_WAITING_BOOTLOAD_CMD:
@@ -405,7 +472,7 @@ recheck:
}
if (val != state) {
- dev_err(&client->dev, "Invalid bootloader state %02X != %02X\n",
+ dev_err(dev, "Invalid bootloader state %02X != %02X\n",
val, state);
return -EINVAL;
}
@@ -413,28 +480,17 @@ recheck:
return 0;
}
-static int mxt_unlock_bootloader(struct i2c_client *client)
+static int mxt_unlock_bootloader(struct mxt_data *data)
{
+ int ret;
u8 buf[2];
buf[0] = MXT_UNLOCK_CMD_LSB;
buf[1] = MXT_UNLOCK_CMD_MSB;
- if (i2c_master_send(client, buf, 2) != 2) {
- dev_err(&client->dev, "%s: i2c send failed\n", __func__);
- return -EIO;
- }
-
- return 0;
-}
-
-static int mxt_fw_write(struct i2c_client *client,
- const u8 *data, unsigned int frame_size)
-{
- if (i2c_master_send(client, data, frame_size) != frame_size) {
- dev_err(&client->dev, "%s: i2c send failed\n", __func__);
- return -EIO;
- }
+ ret = mxt_bootloader_write(data, buf, 2);
+ if (ret)
+ return ret;
return 0;
}
@@ -1366,7 +1422,6 @@ done:
static int mxt_load_fw(struct device *dev, const char *fn)
{
struct mxt_data *data = dev_get_drvdata(dev);
- struct i2c_client *client = data->client;
const struct firmware *fw = NULL;
unsigned int frame_size;
unsigned int pos = 0;
@@ -1378,6 +1433,10 @@ static int mxt_load_fw(struct device *dev, const char *fn)
return ret;
}
+ ret = mxt_lookup_bootloader_address(data);
+ if (ret)
+ goto release_firmware;
+
/* Change to the bootloader mode */
data->in_bootloader = true;
@@ -1387,12 +1446,6 @@ static int mxt_load_fw(struct device *dev, const char *fn)
msleep(MXT_RESET_TIME);
- /* Change to slave address of bootloader */
- if (client->addr == MXT_APP_LOW)
- client->addr = MXT_BOOT_LOW;
- else
- client->addr = MXT_BOOT_HIGH;
-
INIT_COMPLETION(data->bl_completion);
ret = mxt_check_bootloader(data, MXT_WAITING_BOOTLOAD_CMD);
@@ -1400,7 +1453,7 @@ static int mxt_load_fw(struct device *dev, const char *fn)
goto disable_irq;
/* Unlock bootloader */
- mxt_unlock_bootloader(client);
+ mxt_unlock_bootloader(data);
while (pos < fw->size) {
ret = mxt_check_bootloader(data, MXT_WAITING_FRAME_DATA);
@@ -1415,7 +1468,9 @@ static int mxt_load_fw(struct device *dev, const char *fn)
frame_size += 2;
/* Write one frame to device */
- mxt_fw_write(client, fw->data + pos, frame_size);
+ ret = mxt_bootloader_write(data, fw->data + pos, frame_size);
+ if (ret)
+ goto disable_irq;
ret = mxt_check_bootloader(data, MXT_FRAME_CRC_PASS);
if (ret)
@@ -1443,13 +1498,6 @@ disable_irq:
disable_irq(data->irq);
release_firmware:
release_firmware(fw);
-
- /* Change to slave address of application */
- if (client->addr == MXT_BOOT_LOW)
- client->addr = MXT_APP_LOW;
- else
- client->addr = MXT_APP_HIGH;
-
return ret;
}
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/