Re: [PATCH 8/8] pch_gbe: Add MinnowBoard support

[Darren Hart]

On Tue, 2013-06-25 at 18:53 -0700, Darren Hart wrote:
> The MinnowBoard uses an AR803x PHY with the PCH GBE.
> 
> It does not implement the RGMII 2ns TX clock delay in the trace routing
> nor via strapping. Add a detection method for the board and the PHY and
> enable the tx clock delay via the registers.
> 
> This PHY will hibernate without link for 10 seconds. Ensure the PHY is
> awake for probe and then disable hibernation. A future improvement would
> be to convert pch_gbe to using PHYLIB and making sure we can wake the
> PHY at the necessary times rather than permanently disabling it.
> 
> Use the MinnowBoard PCI subsystem ID to identify the board and setup the
> appropriate callbacks in a new pci_id driver_data structure.
> 


Per the discussion on the minnowboard platform drivers in this series
(which provide the minnow_phy_reset() function), I will be rewriting
this patch to provide its own phy_physical_reset() or similar which will
look like the other two phy functions I've added and will take a GPIO
line as an argument, determined by pci_id.

Please disregard this patch for now.

Thanks,


-- 
Darren Hart
Intel Open Source Technology Center
Yocto Project - Technical Lead - Linux Kernel

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/