[patch v1 1/1]regulator: fix for DA9055 regulator

[Ankur Raina]

This patch adds support for usage of GPIO's by multiple bucks and regulators
of DA9055 for enable-disable and voltage set selection.Without this patch regulator
control through GPIO would fail for more than one regulator/buck.

Signed-off-by: Ankur <Ankur.Raina@xxxxxxxxxxxxxxx>
---
 drivers/regulator/da9055-regulator.c |   73 +++++++++++++++++++++-------------
 1 files changed, 45 insertions(+), 28 deletions(-)

diff --git a/drivers/regulator/da9055-regulator.c b/drivers/regulator/da9055-regulator.c
index 3022109..889a2b8 100644
--- a/drivers/regulator/da9055-regulator.c
+++ b/drivers/regulator/da9055-regulator.c
@@ -44,6 +44,10 @@
 #define DA9055_ID_LDO5		6
 #define DA9055_ID_LDO6		7
 
+/* Max Gpio's Controlling Regulators */
+#define MAX_GPIO_LDO		2
+#define GPI_NAME_LENGTH		18
+
 /* DA9055 BUCK current limit */
 static const int da9055_current_limits[] = { 500000, 600000, 700000, 800000 };
 
@@ -445,24 +449,30 @@ static int da9055_gpio_init(struct da9055_regulator *regulator,
 {
 	struct da9055_regulator_info *info = regulator->info;
 	int ret = 0;
+	static int alloc_gpio, req_gpio[MAX_GPIO_LDO];
+	char name[GPI_NAME_LENGTH];
 
-	if (pdata->gpio_ren && pdata->gpio_ren[id]) {
-		char name[18];
-		int gpio_mux = pdata->gpio_ren[id];
-
-		config->ena_gpio = pdata->ena_gpio[id];
-		config->ena_gpio_flags = GPIOF_OUT_INIT_HIGH;
-		config->ena_gpio_invert = 1;
-
+	if (pdata->gpio_rsel && pdata->gpio_rsel[id]) {
 		/*
-		 * GPI pin is muxed with regulator to control the
-		 * regulator state.
+		 * Verify whether GPIO's to be requested are not
+		 * allocated before
 		 */
-		sprintf(name, "DA9055 GPI %d", gpio_mux);
-		ret = devm_gpio_request_one(config->dev, gpio_mux, GPIOF_DIR_IN,
-					    name);
-		if (ret < 0)
-			goto err;
+		if ((pdata->gpio_rsel[id] != req_gpio[0]
+		&& pdata->gpio_rsel[id] != req_gpio[1]) &&
+		(alloc_gpio < MAX_GPIO_LDO)) {
+			/*
+			 * GPI pin is muxed with regulator to control the
+			 * regulator state.
+			 */
+			sprintf(name, "DA9055 GPI %d", pdata->gpio_rsel[id]);
+			ret = devm_gpio_request_one(config->dev,
+						    pdata->gpio_rsel[id],
+						    GPIOF_DIR_IN, name);
+			if (ret < 0)
+				goto err;
+			req_gpio[alloc_gpio] = pdata->gpio_rsel[id];
+			alloc_gpio++;
+		}
 
 		/*
 		 * Let the regulator know that its state is controlled
@@ -476,21 +486,28 @@ static int da9055_gpio_init(struct da9055_regulator *regulator,
 			goto err;
 	}
 
-	if (pdata->gpio_rsel && pdata->gpio_rsel[id]) {
-		char name[18];
-		int gpio_mux = pdata->gpio_rsel[id];
-
-		regulator->reg_rselect = pdata->reg_rsel[id];
-
+	if (pdata->gpio_ren && pdata->gpio_ren[id]) {
 		/*
-		 * GPI pin is muxed with regulator to select the
-		 * regulator register set A/B for voltage ramping.
+		 * Verify whether GPIO's to be requested are not
+		 * allocated before
 		 */
-		sprintf(name, "DA9055 GPI %d", gpio_mux);
-		ret = devm_gpio_request_one(config->dev, gpio_mux, GPIOF_DIR_IN,
-					    name);
-		if (ret < 0)
-			goto err;
+		if ((pdata->gpio_ren[id] != req_gpio[0]
+		&& pdata->gpio_ren[id] != req_gpio[1]) &&
+		(alloc_gpio < MAX_GPIO_LDO)) {
+			regulator->reg_rselect = pdata->reg_rsel[id];
+			/*
+			 * GPI pin is muxed with regulator to select the
+			 * regulator register set A/B for voltage ramping.
+			 */
+			sprintf(name, "DA9055 GPI %d", pdata->gpio_ren[id]);
+			ret = devm_gpio_request_one(config->dev,
+						    pdata->gpio_ren[id],
+						    GPIOF_DIR_IN, name);
+			if (ret < 0)
+				goto err;
+			req_gpio[alloc_gpio] = pdata->gpio_ren[id];
+			alloc_gpio++;
+		}
 
 		/*
 		 * Let the regulator know that its register set A/B
-- 
1.7.1