3.9.8: cannot boot with iommu=on using 6gbps highpoint sata card
From: Justin Piszcz
Date: Fri Jun 28 2013 - 08:07:49 EST
Hello,
This bug I reported in November 2012:
http://www.kernelhub.org/?p=2&msg=170797
http://home.comcast.net/~jpiszcz/20121128/highpoint.jpg
Some discussion on the patches:
http://www.kernelhub.org/?p=2&msg=172597
http://www.kernelhub.org/?p=2&msg=171846
http://www.kernelhub.org/?p=2&msg=172346
My current choices:
1. Stick with old kernel (3.7.x) + patch, which works w/IOMMU=on and use
6gbps SATA board.
2. Put drive back on motherboard SATA2 and the machine will boot properly
with any kernel.
3. I would prefer to use 6gbps if possible.
There is still a problem with 3.9.8: (below)
Rebooting to new kernel (3.9.8) from the 3.7.x kernel w/ patch provided
earlier:
Jun 28 07:48:54 p34 [ 5809.227191] EXT4-fs (sdc2): re-mounted. Opts: (null)
Jun 28 07:48:56 p34 [ 5811.283882] sd 7:0:0:0: [sdc] Synchronizing SCSI
cache
Jun 28 07:48:56 p34 [ 5811.284402] sd 0:0:1:0: [sdb] Synchronizing SCSI
cache
Jun 28 07:48:56 p34 [ 5811.284522] sd 0:0:0:0: [sda] Synchronizing SCSI
cache
Jun 28 07:48:56 p34 [ 5811.284911] 3w-sas: Shutting down host 0.
Jun 28 07:49:03 p34 [ 5818.107989] 3w-sas: Shutdown complete.
Jun 28 07:50:50 p34 [ 6.127384] usb 6-2.1: new full-speed USB device
number 4 using uhci_hcd
Jun 28 07:50:50 p34 [ 6.248468] usb 6-2.1: New USB device found,
idVendor=413c, idProduct=2002
Jun 28 07:50:50 p34 [ 6.249011] usb 6-2.1: New USB device strings: Mfr=1,
Product=2, SerialNumber=0
Jun 28 07:50:50 p34 [ 6.250654] usb 6-2.1: Product: Dell USB Keyboard Hub
Jun 28 07:50:50 p34 [ 6.252476] usb 6-2.1: Manufacturer: Dell
Jun 28 07:50:50 p34 [ 6.264087] input: Dell Dell USB Keyboard Hub as
/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.1/6-2.1:1.0/input/input5
Jun 28 07:50:50 p34 [ 6.265041] hid-generic 0003:413C:2002.0004:
input,hidraw3: USB HID v1.10 Keyboard [Dell Dell USB Keyboard Hub] on
usb-0000:00:1d.0-2.1/input0
Jun 28 07:50:50 p34 [ 6.274732] input: Dell Dell USB Keyboard Hub as
/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.1/6-2.1:1.1/input/input6
Jun 28 07:50:50 p34 [ 6.275752] hid-generic 0003:413C:2002.0005:
input,hidraw4: USB HID v1.10 Device [Dell Dell USB Keyboard Hub] on
usb-0000:00:1d.0-2.1/input1
Jun 28 07:50:50 p34 [ 6.343561] usb 6-2.3: new low-speed USB device
number 5 using uhci_hcd
Jun 28 07:50:50 p34 [ 6.476670] usb 6-2.3: New USB device found,
idVendor=045e, idProduct=0040
Jun 28 07:50:50 p34 [ 6.477220] usb 6-2.3: New USB device strings: Mfr=1,
Product=3, SerialNumber=0
Jun 28 07:50:50 p34 [ 6.479064] usb 6-2.3: Product: Microsoft 3-Button
Mouse with IntelliEye(TM)
Jun 28 07:50:50 p34 [ 6.480944] usb 6-2.3: Manufacturer: Microsoft
Jun 28 07:50:50 p34 [ 6.500368] input: Microsoft Microsoft 3-Button Mouse
with IntelliEye(TM) as
/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.3/6-2.3:1.0/input/input7
Jun 28 07:50:50 p34 [ 6.501539] hid-generic 0003:045E:0040.0006:
input,hidraw5: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with
IntelliEye(TM)] on usb-0000:00:1d.0-2.3/input0
Jun 28 07:50:52 p34 [ 7.840750] ata14.00: qc timeout (cmd 0xa1)
Jun 28 07:50:52 p34 [ 7.848753] ata7.00: qc timeout (cmd 0xec)
Jun 28 07:50:52 p34 [ 7.849304] ata7.00: failed to IDENTIFY (I/O error,
err_mask=0x4)
Jun 28 07:50:52 p34 [ 8.156029] ata7: SATA link up 6.0 Gbps (SStatus 133
SControl 300)
Jun 28 07:50:52 p34 [ 8.341165] ata14.00: failed to IDENTIFY (I/O error,
err_mask=0x4)
Jun 28 07:50:53 p34 [ 9.146828] ata14: SATA link up 1.5 Gbps (SStatus 113
SControl 300)
Jun 28 07:51:02 p34 [ 18.164175] ata7.00: qc timeout (cmd 0xec)
Jun 28 07:51:02 p34 [ 18.164740] ata7.00: failed to IDENTIFY (I/O error,
err_mask=0x4)
Jun 28 07:51:02 p34 [ 18.166487] ata7: limiting SATA link speed to 3.0
Gbps
Jun 28 07:51:02 p34 [ 18.473437] ata7: SATA link up 6.0 Gbps (SStatus 133
SControl 320)
Jun 28 07:51:03 p34 [ 19.154971] ata14.00: qc timeout (cmd 0xa1)
Jun 28 07:51:04 p34 [ 19.655389] ata14.00: failed to IDENTIFY (I/O error,
err_mask=0x4)
Jun 28 07:51:04 p34 [ 19.656004] ata14: limiting SATA link speed to 1.5
Gbps
Jun 28 07:51:04 p34 [ 20.463046] ata14: SATA link up 1.5 Gbps (SStatus 113
SControl 310)
Jun 28 07:51:32 p34 [ 48.497977] ata7.00: qc timeout (cmd 0xec)
Jun 28 07:51:32 p34 [ 48.498547] ata7.00: failed to IDENTIFY (I/O error,
err_mask=0x4)
Jun 28 07:51:33 p34 [ 48.805177] ata7: SATA link up 6.0 Gbps (SStatus 133
SControl 320)
Jun 28 07:51:34 p34 [ 50.487585] ata14.00: qc timeout (cmd 0xa1)
Jun 28 07:51:35 p34 [ 50.987948] ata14.00: failed to IDENTIFY (I/O error,
err_mask=0x4)
Jun 28 07:51:36 p34 [ 51.793613] ata14: SATA link up 1.5 Gbps (SStatus 113
SControl 310)
Jun 28 07:51:36 p34 [ 52.294202] VFS: Cannot open root device "822" or
unknown-block(8,34): error -6
Jun 28 07:51:36 p34 [ 52.294770] Please append a correct "root=" boot
option; here are the available partitions:
Jun 28 07:51:36 p34 [ 52.296927] 0800 29296762880 sda
Jun 28 07:51:36 p34 driver: sd
Jun 28 07:51:36 p34 [ 52.298832] 0801 29296760832 sda1
95a4bdc9-ee53-4f8d-8f59-c28a52ac2da3
Jun 28 07:51:36 p34
Jun 28 07:51:36 p34 [ 52.300841] 0810 29296762880 sdb
Jun 28 07:51:36 p34 driver: sd
Jun 28 07:51:36 p34 [ 52.302851] 0811 29296760832 sdb1
d8879e67-9c5a-4672-bf82-38ba2f5229ab
Jun 28 07:51:36 p34
Jun 28 07:51:36 p34 [ 52.304897] Kernel panic - not syncing: VFS: Unable
to mount root fs on unknown-block(8,34)
Jun 28 07:51:36 p34 [ 52.306888] Pid: 1, comm: swapper/0 Not tainted 3.9.8
#1
Jun 28 07:51:36 p34 [ 52.308938] Call Trace:
Jun 28 07:51:36 p34 [ 52.310856] [<ffffffff81750207>] panic+0xbd/0x1bf
Jun 28 07:51:36 p34 [ 52.312905] [<ffffffff81abd28a>]
mount_block_root+0x1f9/0x297
Jun 28 07:51:36 p34 [ 52.314964] [<ffffffff81abd37e>]
mount_root+0x56/0x59
Jun 28 07:51:36 p34 [ 52.317018] [<ffffffff81abd4b1>]
prepare_namespace+0x130/0x15c
Jun 28 07:51:36 p34 [ 52.319071] [<ffffffff81abcfb9>]
kernel_init_freeable+0x185/0x193
Jun 28 07:51:36 p34 [ 52.321091] [<ffffffff81abc80b>] ?
do_early_param+0x8a/0x8a
Jun 28 07:51:36 p34 [ 52.323074] [<ffffffff8174b920>] ?
rest_init+0x70/0x70
Jun 28 07:51:36 p34 [ 52.325025] [<ffffffff8174b929>]
kernel_init+0x9/0xf0
Jun 28 07:51:36 p34 [ 52.326923] [<ffffffff8175856c>]
ret_from_fork+0x7c/0xb0
Jun 28 07:51:36 p34 [ 52.328634] [<ffffffff8174b920>] ?
rest_init+0x70/0x70
Jun 28 07:51:36 p34 [ 52.331133] drm_kms_helper: panic occurred, switching
back to text console
Jun 28 07:51:36 p34 [ 52.332358] ------------[ cut here ]------------
Jun 28 07:51:36 p34 [ 52.336000] WARNING: at arch/x86/kernel/smp.c:123
native_smp_send_reschedule+0x53/0x60()
Jun 28 07:51:36 p34 [ 52.339181] Hardware name: X8DTH-i/6/iF/6F
Jun 28 07:51:36 p34 [ 52.342368] Pid: 1, comm: swapper/0 Not tainted 3.9.8
#1
Jun 28 07:51:36 p34 [ 52.345576] Call Trace:
Jun 28 07:51:36 p34 [ 52.348663] <IRQ>
Jun 28 07:51:36 p34 [<ffffffff810609e5>] warn_slowpath_common+0x75/0xb0
Jun 28 07:51:36 p34 [ 52.351784] [<ffffffff81060b05>]
warn_slowpath_null+0x15/0x20
Jun 28 07:51:36 p34 [ 52.354883] [<ffffffff81021253>]
native_smp_send_reschedule+0x53/0x60
Jun 28 07:51:36 p34 [ 52.357988] [<ffffffff8108cac1>]
trigger_load_balance+0x1a1/0x230
Jun 28 07:51:36 p34 [ 52.361095] [<ffffffff810859a4>]
scheduler_tick+0x104/0x140
Jun 28 07:51:36 p34 [ 52.364179] [<ffffffff8106d482>]
update_process_times+0x62/0x80
Jun 28 07:51:36 p34 [ 52.367245] [<ffffffff81097339>]
tick_sched_handle.isra.9+0x29/0x60
Jun 28 07:51:36 p34 [ 52.370318] [<ffffffff81097494>]
tick_sched_timer+0x44/0x70
Jun 28 07:51:36 p34 [ 52.373368] [<ffffffff8107f10a>]
__run_hrtimer.isra.31+0x4a/0xd0
Jun 28 07:51:36 p34 [ 52.376482] [<ffffffff8107fa35>]
hrtimer_interrupt+0xe5/0x220
Jun 28 07:51:36 p34 [ 52.379521] [<ffffffff81021bc4>]
smp_apic_timer_interrupt+0x64/0xa0
Jun 28 07:51:36 p34 [ 52.382568] [<ffffffff8175928a>]
apic_timer_interrupt+0x6a/0x70
Jun 28 07:51:36 p34 [ 52.385620] <EOI>
Jun 28 07:51:36 p34 [<ffffffff810ee22c>] ? cache_grow+0x7c/0x2b0
Jun 28 07:51:36 p34 [ 52.388707] [<ffffffff810ee79d>]
____cache_alloc_node+0x7d/0x150
Jun 28 07:51:36 p34 [ 52.391769] [<ffffffff817512ce>]
alternate_node_alloc+0x65/0x6d
Jun 28 07:51:36 p34 [ 52.394820] [<ffffffff810eed54>]
__kmalloc+0x154/0x180
Jun 28 07:51:36 p34 [ 52.397864] [<ffffffff813e5467>]
drm_crtc_helper_set_config+0x127/0xb10
Jun 28 07:51:36 p34 [ 52.400911] [<ffffffff81061ebc>] ?
console_unlock+0x1fc/0x3c0
Jun 28 07:51:36 p34 [ 52.403963] [<ffffffff813f6b69>]
drm_mode_set_config_internal+0x29/0x60
Jun 28 07:51:36 p34 [ 52.406989] [<ffffffff813e361f>]
drm_fb_helper_restore_fbdev_mode+0x4f/0x70
Jun 28 07:51:36 p34 [ 52.409972] [<ffffffff813e3685>]
drm_fb_helper_force_kernel_mode+0x45/0x80
Jun 28 07:51:36 p34 [ 52.412906] [<ffffffff813e3714>]
drm_fb_helper_panic+0x24/0x30
Jun 28 07:51:36 p34 [ 52.415784] [<ffffffff81080efd>]
notifier_call_chain+0x4d/0x70
Jun 28 07:51:36 p34 [ 52.418619] [<ffffffff8108100d>]
__atomic_notifier_call_chain+0xd/0x10
Jun 28 07:51:36 p34 [ 52.421453] [<ffffffff81081021>]
atomic_notifier_call_chain+0x11/0x20
Jun 28 07:51:36 p34 [ 52.424283] [<ffffffff8175022e>] panic+0xe4/0x1bf
Jun 28 07:51:36 p34 [ 52.427098] [<ffffffff81abd28a>]
mount_block_root+0x1f9/0x297
Jun 28 07:51:36 p34 [ 52.429912] [<ffffffff81abd37e>]
mount_root+0x56/0x59
Jun 28 07:51:36 p34 [ 52.432732] [<ffffffff81abd4b1>]
prepare_namespace+0x130/0x15c
Jun 28 07:51:36 p34 [ 52.435421] [<ffffffff81abcfb9>]
kernel_init_freeable+0x185/0x193
Jun 28 07:51:36 p34 [ 52.438047] [<ffffffff81abc80b>] ?
do_early_param+0x8a/0x8a
Jun 28 07:51:36 p34 [ 52.440675] [<ffffffff8174b920>] ?
rest_init+0x70/0x70
Jun 28 07:51:36 p34 [ 52.443292] [<ffffffff8174b929>]
kernel_init+0x9/0xf0
Jun 28 07:51:36 p34 [ 52.445888] [<ffffffff8175856c>]
ret_from_fork+0x7c/0xb0
Jun 28 07:51:36 p34 [ 52.448480] [<ffffffff8174b920>] ?
rest_init+0x70/0x70
Jun 28 07:51:36 p34 [ 52.451055] ---[ end trace 97c8306a30953a9d ]---
Justin.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/