[PATCH 4/7] selftests: add basic posix timers selftests

[Frederic Weisbecker]

Add some initial basic tests on a few posix timers interface such as
setitimer() and timer_settime().

These simply check that expiration happens in a reasonable timeframe after
expected elapsed clock time (user time, user + system time, real time,
...).

This is helpful for finding basic breakages while hacking
on this subsystem.

Signed-off-by: Frederic Weisbecker <fweisbec@xxxxxxxxx>
Cc: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: Peter Zijlstra <a.p.zijlstra@xxxxxxxxx>
Cc: Steven Rostedt <rostedt@xxxxxxxxxxx>
Cc: KOSAKI Motohiro <kosaki.motohiro@xxxxxxxxx>
Cc: Olivier Langlois <olivier@xxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
 tools/testing/selftests/Makefile              |    1 +
 tools/testing/selftests/timers/Makefile       |    8 +
 tools/testing/selftests/timers/posix_timers.c |  221 +++++++++++++++++++++++++
 3 files changed, 230 insertions(+), 0 deletions(-)
 create mode 100644 tools/testing/selftests/timers/Makefile
 create mode 100644 tools/testing/selftests/timers/posix_timers.c

diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
index 0a63658..4cb14ca 100644
--- a/tools/testing/selftests/Makefile
+++ b/tools/testing/selftests/Makefile
@@ -6,6 +6,7 @@ TARGETS += memory-hotplug
 TARGETS += mqueue
 TARGETS += net
 TARGETS += ptrace
+TARGETS += timers
 TARGETS += vm
 
 all:
diff --git a/tools/testing/selftests/timers/Makefile b/tools/testing/selftests/timers/Makefile
new file mode 100644
index 0000000..eb2859f
--- /dev/null
+++ b/tools/testing/selftests/timers/Makefile
@@ -0,0 +1,8 @@
+all:
+	gcc posix_timers.c -o posix_timers -lrt
+
+run_tests: all
+	./posix_timers
+
+clean:
+	rm -f ./posix_timers
diff --git a/tools/testing/selftests/timers/posix_timers.c b/tools/testing/selftests/timers/posix_timers.c
new file mode 100644
index 0000000..4fa655d
--- /dev/null
+++ b/tools/testing/selftests/timers/posix_timers.c
@@ -0,0 +1,221 @@
+/*
+ * Copyright (C) 2013 Red Hat, Inc., Frederic Weisbecker <fweisbec@xxxxxxxxxx>
+ *
+ * Licensed under the terms of the GNU GPL License version 2
+ *
+ * Selftests for a few posix timers interface.
+ *
+ * Kernel loop code stolen from Steven Rostedt <srostedt@xxxxxxxxxx>
+ */
+
+#include <sys/time.h>
+#include <stdio.h>
+#include <signal.h>
+#include <unistd.h>
+#include <time.h>
+#include <pthread.h>
+
+#define DELAY 2
+#define USECS_PER_SEC 1000000
+
+static volatile int done;
+
+/* Busy loop in userspace to elapse ITIMER_VIRTUAL */
+static void user_loop(void)
+{
+	while (!done);
+}
+
+/*
+ * Try to spend as much time as possible in kernelspace
+ * to elapse ITIMER_PROF.
+ */
+static void kernel_loop(void)
+{
+	void *addr = sbrk(0);
+
+	while (!done) {
+		brk(addr + 4096);
+		brk(addr);
+	}
+}
+
+/*
+ * Sleep until ITIMER_REAL expiration.
+ */
+static void idle_loop(void)
+{
+	pause();
+}
+
+static void sig_handler(int nr)
+{
+	done = 1;
+}
+
+/*
+ * Check the expected timer expiration matches the GTOD elapsed delta since
+ * we armed the timer. Keep a 0.5 sec error margin due to various jitter.
+ */
+static int check_diff(struct timeval start, struct timeval end)
+{
+	long long diff;
+
+	diff = end.tv_usec - start.tv_usec;
+	diff += (end.tv_sec - start.tv_sec) * USECS_PER_SEC;
+
+	if (abs(diff - DELAY * USECS_PER_SEC) > USECS_PER_SEC / 2) {
+		printf("Diff too high: %lld..", diff);
+		return -1;
+	}
+
+	return 0;
+}
+
+static int check_itimer(int which)
+{
+	int err;
+	struct timeval start, end;
+	struct itimerval val = {
+		.it_value.tv_sec = DELAY,
+	};
+
+	printf("Check itimer ");
+
+	if (which == ITIMER_VIRTUAL)
+		printf("virtual... ");
+	else if (which == ITIMER_PROF)
+		printf("prof... ");
+	else if (which == ITIMER_REAL)
+		printf("real... ");
+
+	fflush(stdout);
+
+	done = 0;
+
+	if (which == ITIMER_VIRTUAL)
+		signal(SIGVTALRM, sig_handler);
+	else if (which == ITIMER_PROF)
+		signal(SIGPROF, sig_handler);
+	else if (which == ITIMER_REAL)
+		signal(SIGALRM, sig_handler);
+
+	err = gettimeofday(&start, NULL);
+	if (err < 0) {
+		perror("Can't call gettimeofday()\n");
+		return -1;
+	}
+
+	err = setitimer(which, &val, NULL);
+	if (err < 0) {
+		perror("Can't set timer\n");
+		return -1;
+	}
+
+	if (which == ITIMER_VIRTUAL)
+		user_loop();
+	else if (which == ITIMER_PROF)
+		kernel_loop();
+	else if (which == ITIMER_REAL)
+		idle_loop();
+
+	gettimeofday(&end, NULL);
+	if (err < 0) {
+		perror("Can't call gettimeofday()\n");
+		return -1;
+	}
+
+	if (!check_diff(start, end))
+		printf("[OK]\n");
+	else
+		printf("[FAIL]\n");
+
+	return 0;
+}
+
+static int check_timer_create(int which)
+{
+	int err;
+	timer_t id;
+	struct timeval start, end;
+	struct itimerspec val = {
+		.it_value.tv_sec = DELAY,
+	};
+
+	printf("Check timer_create() ");
+	if (which == CLOCK_THREAD_CPUTIME_ID) {
+		printf("per thread... ");
+	} else if (which == CLOCK_PROCESS_CPUTIME_ID) {
+		printf("per process... ");
+	}
+	fflush(stdout);
+
+	done = 0;
+	timer_create(which, NULL, &id);
+	if (err < 0) {
+		perror("Can't create timer\n");
+		return -1;
+	}
+	signal(SIGALRM, sig_handler);
+
+	err = gettimeofday(&start, NULL);
+	if (err < 0) {
+		perror("Can't call gettimeofday()\n");
+		return -1;
+	}
+
+	err = timer_settime(id, 0, &val, NULL);
+	if (err < 0) {
+		perror("Can't set timer\n");
+		return -1;
+	}
+
+	user_loop();
+
+	gettimeofday(&end, NULL);
+	if (err < 0) {
+		perror("Can't call gettimeofday()\n");
+		return -1;
+	}
+
+	if (!check_diff(start, end))
+		printf("[OK]\n");
+	else
+		printf("[FAIL]\n");
+
+	return 0;
+}
+
+int main(int argc, char **argv)
+{
+	int err;
+
+	printf("Testing posix timers. False negative may happen on CPU execution \n");
+	printf("based timers if other threads run on the CPU...\n");
+
+	if (check_itimer(ITIMER_VIRTUAL) < 0)
+		return -1;
+
+	if (check_itimer(ITIMER_PROF) < 0)
+		return -1;
+
+	if (check_itimer(ITIMER_REAL) < 0)
+		return -1;
+
+	if (check_timer_create(CLOCK_THREAD_CPUTIME_ID) < 0)
+		return -1;
+
+	/*
+	 * It's unfortunately hard to reliably test a timer expiration
+	 * on parallel multithread cputime. We could arm it to expire
+	 * on DELAY * nr_threads, with nr_threads busy looping, then wait
+	 * the normal DELAY since the time is elapsing nr_threads faster.
+	 * But for that we need to ensure we have real physical free CPUs
+	 * to ensure true parallelism. So test only one thread until we
+	 * find a better solution.
+	 */
+	if (check_timer_create(CLOCK_PROCESS_CPUTIME_ID) < 0)
+		return -1;
+
+	return 0;
+}
-- 
1.7.5.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/