[PATCH v2 4/4] BSC9131rdb/dts: Add nodes for supporting AIC

[akhil.goyal]

From: Akhil Goyal <akhil.goyal@xxxxxxxxxxxxx>

BSC9131 is a hetrogenous system where Antenna interface controller
(AIC) is a part of DSP subsystem. But its configuration is done from
PA side. So a DSP node is added with appropriate CCSR address visible
to PA and hence the address space for AIC will be visible to PA.

BSC9131 support 3 AIC lanes for ADI interface and 3 for MAXIM type of
interface. This patch support only ADI lanes.

Signed-off-by: Pankaj Chauhan <pankaj.chauhan@xxxxxxxxxxxxx>
Signed-off-by: Shaveta Leekha <shaveta@xxxxxxxxxxxxx>
Signed-off-by: Bhaskar Upadhaya <bhaskar.upadhaya@xxxxxxxxxxxxx>
Signed-off-by: Akhil Goyal <akhil.goyal@xxxxxxxxxxxxx>
---
 arch/powerpc/boot/dts/bsc9131rdb.dts          |    4 ++
 arch/powerpc/boot/dts/fsl/bsc9131si-post.dtsi |   38 +++++++++++++++++++++++++
 2 files changed, 42 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/boot/dts/bsc9131rdb.dts b/arch/powerpc/boot/dts/bsc9131rdb.dts
index e13d2d4..c134de7 100644
--- a/arch/powerpc/boot/dts/bsc9131rdb.dts
+++ b/arch/powerpc/boot/dts/bsc9131rdb.dts
@@ -28,6 +28,10 @@
 	board_soc: soc: soc@ff700000 {
 		ranges = <0x0 0x0 0xff700000 0x100000>;
 	};
+
+	dsp_soc: sc3850@ff600000 {
+		ranges = <0x0 0x0 0xff600000 0x100000>;
+	};
 };
 
 /include/ "bsc9131rdb.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/bsc9131si-post.dtsi b/arch/powerpc/boot/dts/fsl/bsc9131si-post.dtsi
index 5180d9d..487e949 100644
--- a/arch/powerpc/boot/dts/fsl/bsc9131si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/bsc9131si-post.dtsi
@@ -191,3 +191,41 @@ global-utilities@e0000 {
 		fsl,has-rstcr;
 	};
 };
+
+&dsp_soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "simple-bus";
+	gcr@18000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,bsc9131-gcr", "fsl,bsc9132-gcr";
+		reg = <0x18000 0x200>;
+	};
+	aic@50000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,bsc9131-aic", "fsl,bsc9132-aic";
+		reg = <0x50000 0x200>;
+		interrupts = <49 2 0 0 53 2 0 0>;
+		lane0: aiclane@200 {
+			reg = <0x200 0x200>;
+			lane_id = <0>;
+			interrupts = <45 2 0 0>;
+		};
+
+		lane1: aiclane@400 {
+			reg = <0x400 0x200>;
+			lane_id = <1>;
+			interrupts = <46 2 0 0>;
+		};
+
+		lane2: aiclane@600 {
+			reg = <0x600 0x200>;
+			lane_id = <2>;
+			interrupts = <47 2 0 0>;
+		};
+	};
+};
+
+
-- 
1.6.3.1



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/